Solution Manager monitoring of Standalone Gateway.

I have been advised this is possible with the sapccmsr, which we have running on our java estate, I have registered the program, and seem to be having a problem getting it to recognise the fact there is anything to monitor?
We have Aix 5.3
SAP gateway is from the Netweaver 2004s kernel.
SAPCCMSR is
CCMS version 20040229, 64 bit, multithreaded, Unicode
      compiled at   Aug 24 2008
      systemid      324 (IBM RS/6000 with AIX)
      relno         7000
      patch text    patch collection 2008/3, OSS note 1129577
      patchno       175
Solution manager is patch
ST     400     0016     SAPKITL426     SAP Solution Manager Tool
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
Not sure why, any ideas?

Hi Paul,
I would suggest to move this thread to the general SolMan forum, because it's not a VAR specific question.
Do you agree?
Best regards,
Ruediger

Similar Messages

Display "system description" in Solution Manager monitoring info

Hi,
We have maintained the "system description" info for our satellite systems in SMSY:
http://screencast.com/t/OTNmMjFiM
Is there any way to display this info in the Solution Manager monitoring info?? Without this description text and only with system "SID" info it is very difficult for our IT Managers to identify each system...
For example, in the monitoring Work Center (System Status tab), is there any way to add the "system description" as a column? We didn't find it any way to insert it...
Example: http://screencast.com/t/ZGU0ZjJk
Is there any way too in the SL Reports to include the "system description" info in the system overview?
Example: http://screencast.com/t/ZDg4MGIyYj
Without this info it is really difficult for our IT Managers (from the NWBC) to manage the Solution Manager info and it is only useless for the IT Administrators...
Thanks in advance,
Jon

Hello,
You can run report RSMSY_REPORTING01 to get the details that you are looking for you will have to work with the selection criteria.
Chad

Solution Manager Monitoring

Hi Everyone,
Please can anyone provide me some suggestions for how is solution manager being used to monitor the system?
Like what all we can use early watch reports etc.
Thanks in advance.
Regards,
Avneesh

Hi Holger,
You gave me the best response i was expecting for.
Thanks for the help.
Regards,
Avneesh

Send Solution Manager monitor data to ITM (IBM Tivoli Manager)

Hi all,
I've recently installed a SAP Solution Manager 7.1 SP10 system in order to replace the old Solution Manager 7.0 system. The old system was (also) used for (CCMS) monitoring. A subset of the gathered data was sent to ITM (company policy and mandatory). With SolMan 7.1 SAP has drastically changed the way they monitor. CCMS/RZ20 (agent based) is no longer used (although it is still possible).
In the TX /nSOLMAN_SETUP I've done the "System Preparation", "Basic Configuration", "Managed System Configuration" and "Technical monitoring", installed the CA Wily introscope EM, Bytecode agents etc. I can see monitoring data in my Solution Manager system.
My question now is, how can I get (a subset of my) monitoring data from my Solution Manager system into ITM? How can I select only the for ITM relevant data, for instance file system full or failed database backup?
Many thanks!
/Marcel Kuijper

Hi Marcel,
Pelase check out the How-to guides at the following SAP link:
http://wiki.scn.sap.com/wiki/display/TechOps/System+Monitoring+-+How-to+Guides
and SAP note 1965064 - SolMan 7.10 SP10 - MAI OS/SNMP Adapters
Regards,
Roland

Can Solution Manager monitor TIBCO system

Hi there, can solution manager be configured to monitor TIBCO system - such as if certain services is running on TIBCO, check it's file system size, read files and check for Errors...etc?
Cecilia

Hi Craig:
More questions. Would Solution Manager 3.2 or 4.0 be able to do it without the adapter?
Regards
Cecilia

Solution Manager Monitoring Table Size

Hi Gurus!
Question for you!
Is there a way to monitor the size of a table, or even the number of registers that it has, or anything like it?
The problem is that in several ocasions the size of tables gets too big that we end up having to delete old information or archive them, and I wanted to know about this before it becomes a problem.
Thanks in advance and BR,
Lucas

Hello,
Did you check this link http://help.sap.com/saphelp_nw70/helpdata/en/f0/02a63b9bb3e035e10000000a114084/frameset.htm on sap Help portal.
Hope this will help.
Regards,
Benjamin

Solution Manager - Monitoring - Instance Status

HI all,
I'm trying to configure in "setup system monitoring" the alert on "Instance Status" but is always in staus "Alert is active but not accessible".
The others alerts work fine.
I have already configured the ccmsping in rz21 and in rz20 everything is ok.
Thanks in advance for any suggestions,
Andrea

Hi,
If you want to monitor the Availability status of the instance then check the below docs
[http://help.sap.com/saphelp_nw70/helpdata/EN/38/9e100dd7980fffe10000009b3810a5/frameset.htm]
[CCMSPING config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/d547f687-0901-0010-07a9-ce64cc044215]
[CCMS Agent config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/40ef0688-814a-2a10-afb1-89b40d83d0e0]
regards
Naveen
Edited by: Naveen Kumar on Dec 15, 2009 1:07 PM

Solution Manager System Monitoring of a CE 7.10

Hi
I am trying to setup a Solution Manager Monitoring Solution for a CE 7.10 Enviroment.
I have already setup CEN in SOLMAN.
I have registered CE Systems with a sapccmsr j2ee agent.
I have setup the JCO RFC Connection in CE.
I have created the TCP/IP Connection to the JCO Connection in Solman.
I have set the TCP/IP Connection in RZ21 as the J2EE Customizing Destination.
The solution involves only 1 Logical Component with 3 CE Systems.
When I go to the solution manager setup and try to configure the MTE Nodes for my solution I cannot get the MTE context while clicking in Activate Monitoring for other Software Components
I choose Java Application Server, choose my server, choose CEn but when i have to choose the context of the MTE i get an empty list.
IF i go Activate Monitoring for Other Servers and choose the server I get the contexts of the remote server, but I can only choose one.
So how can I see the context of the CE servers in the Software component part?
Ty.

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

SOLUTION MANAGER- alert doesn't exist or not accesible now

I execute transaction solution_manager and I chose productive system in the User defined Alert I created alert "Erroneous Fax & e-Mail (client 300)" and I copy in the Alert long name MTE name which I obtained form rz20 source monitoring system and ... so on
It sould work but in one system I received "alert doesn't exist or not accesible now"
Can somebody help
Thanks

Hi,
Can you provide me the solution for this issue. Even i am facing the same issue while configuring the solution manager monitoring set up.
Thanks in Advance
Suresh

Solution Manager Alerts

Hi SAP Experts,
I am working on SAP R/3 4.6C version. We have Solution Manager monitoring the systems. The Solutions Manager keeps sending the alert messages about the working status of the system. The Alerts are as follws:
- Oracle Buffers Buffer cache
- Dialog ResponseTime
- Dialog FrontendResponseTime
- Dialog DBRequestTime
- Dialog Dialog FrontEndNetTime
- Dialog LongRunners
- Paging Page_In
- Paging Page_Out
- CPU_Utilization
Can anyone tell me the reason for these alerts and the solutions that need to implement to fine tune the system to avoid these Alerts.
Your help will be greatly aprreciated.
Regards
Vanitha Dorcas

Hi,
Have you performed an EWA ? It should contain a brief suggestion about each issue.
Br,
Javier

Monitoring of Standalone EP 7.0 system in Solution Manager 7.0

Hi Experts,
I need to configure Solution manager 7.0 for monitoring EP 7.0 (Stand alone ) system.
Can you share documents related to configuration of Solution Manager 7.0 for monitoring EP 7.0 system?
Thanks,
Anit

Hi,
EP Monitoring is done by Solution Manager Diagnostics.
Some Basis steps for ref
1. Definition of EP system thru SMSY in solution manager system
2. SMD agent installation in EP system with CCMS ping cofiguration in both solman and EP system
3. Wily Introscope Enterprise manager installation in solution manager system
3. From SMD wizard, you can configure the list of activities to be monitored for a EP system.
For detailed info check SMD installation guide
Regards
KT

Monitoring a non-SAP satellite system in Solution Manager

Hi Folks,
I have two quick questions.
1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
2.) What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
Background:
- My Solution Manager system is a NW70 EHP1
- Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
- I have my CCMS agents registered back to my CEN for the ABAP and Java systems
Satellite systems:
- Multiple Wintel servers (both IA32 and x64) that are running;
o standalone SQL server databases
o BOE/BOBJ
o BPC for Microsoft
Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
Thank you,
Bill

Dear William,
Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
I hope this information is helpful.
Regards,
Paul

Regarding Monitoring Service for Solution manager

We need to configure "Monitoring" services in SAP solution manager 7.0.
Could somebody suggest us what are the main tasks we need to consider for doing Monitoring settings.
How many Minimum servers required to configure Monitoring services in solution manager system.
Also if any good document reference for this?
Thanks

Hi Jai,
welcome to sdn.
COMPONENTS & TOOLS OF SAP NETWEAVER
SAP Solution Manager
The SAP Solution Manager application management solution facilitates technical support for distributed systems u2013 with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. A centralized, robust application management and administration solution, SAP Solution Manager combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. And, as a customer of SAP, you have full access to the core SAP Solution Manager for no extra charge.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
SAP Solution Manager features and functions include:
SAP Business Suite implementation and upgrades u2013 SAP Solution Manager provides content that accelerates implementation. Configuration information and a process-driven approach to implementation speed the blueprint, configuration, and final preparation phases. SAP Solution Manager enables efficient project administration and centralized control of cross-component implementations.
Change control management u2013 SAP Solution Manager controls all software and configuration changes of the IT solution. This includes the approval process for change requests, the deployment of changes, and later analysis of changes. This ensures quality of the solution and enables traceability of all changes.
Testing u2013 SAP Solution Manager speeds test preparation and execution. It provides a single point of access to the complete system landscape and enables centralized storage of testing material and test results to support cross-component tests.
IT and application support u2013 The service desk included in SAP Solution Manager helps you manage incidents more efficiently and eases the settlement of support costs. Centralized handling of support messages makes the support organization more efficient.
Root cause analysis u2013 The diagnostics functions in SAP Solution Manager allow identification, analysis, and resolution of problems, even in heterogeneous environments. This helps to isolate general performance bottlenecks, to isolate exceptional situations, to record the activity of single users or processes, and to identify changes to the productive landscape. As a result, problem resolution is accelerated and business availability increased.
Solution monitoring u2013 SAP Solution Manager performs centralized, real-time monitoring of systems, business processes, and interfaces, which reduces administration effort. It can even monitor intersystem dependencies. Proactive monitoring helps you avoid critical situations, while automatic notifications enable fast response to issues.
Service-level management and reporting u2013 SAP Solution Manager allows easy definition of service levels and provides automated reporting. Service reporting covers all systems in the solution landscape and provides a consolidated report containing the information you need to make strategic IT decisions.
Service processing u2013 SAP Solution Manager makes appropriate service recommendations and delivers SAP support services. These include SAP Safeguarding, which helps you manage technical risk; SAP Solution Management Optimization, which helps you get the most from your SAP solutions; and SAP Empowering, which helps you manage your solutions.
Administration u2013 Administration tasks are mainly executed locally on the involved systems, but can be accessed and triggered from a central administration console. The administration work center in SAP Solution Manager offers a central entry point and unified access to all SAP technology.
SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
It provides a range of scenarios to support this. Extending from project management to Solution Monitoring to Service Desk to E-learning Management, it provides an efficient way to carry out a plethora of business tasks.
SAP Solution Manager is the successor to ASAP ValueSAP. SAP Solution Manager helps in implementing and managing complex system landscapes. Globally systems are getting distributed across geographies and business processes cover more than one system. In such complex scenarios, integrating technical and business requirements is important for the success of IT. SAP Solution Manager provides SAP customers with an efficient means of handling both the technical and business process side of solution implementation .
As part of SAP Solution Management Solutions, the customers receive best practices relating to:
- Global Strategy and Service Level Management
- Business Process Management
- Management of MySAP Technology
- Software Change Management
- Support Desk Management
SAP delivers this using support programs during implementation of the system solution. Some of the benefits of using SAP's Solution Manager are that it helps:
- Manages the technical risk associated with the implementation of the solution ensuring technical robustness
- Helps leverage users core competencies in implementing solutions
- Ensures solution works as intended with best practices built in.
see these links...
http://www.ne-sap-solution-manager.com/
http://www.saptechies.com/category/sap-solution-manager/
thanks
karthik
reward me if usefull

How to monitor all SAP Server through solution Manager?

Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
Sachin

Hi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode DSWP.
After that you can include the systems using tcode SMSY.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to service.sap.com and help.sap.com find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v

System Monitoring in Solution Manager

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana

Solution Manager monitoring of Standalone Gateway.

Similar Messages

Maybe you are looking for