Solution Manager Monitoring
Hi Everyone,
Please can anyone provide me some suggestions for how is solution manager being used to monitor the system?
Like what all we can use early watch reports etc.
Thanks in advance.
Regards,
Avneesh
Hi Holger,
You gave me the best response i was expecting for.
Thanks for the help.
Regards,
Avneesh
Similar Messages
-
Display "system description" in Solution Manager monitoring info
Hi,
We have maintained the "system description" info for our satellite systems in SMSY:
http://screencast.com/t/OTNmMjFiM
Is there any way to display this info in the Solution Manager monitoring info?? Without this description text and only with system "SID" info it is very difficult for our IT Managers to identify each system...
For example, in the monitoring Work Center (System Status tab), is there any way to add the "system description" as a column? We didn't find it any way to insert it...
Example: http://screencast.com/t/ZGU0ZjJk
Is there any way too in the SL Reports to include the "system description" info in the system overview?
Example: http://screencast.com/t/ZDg4MGIyYj
Without this info it is really difficult for our IT Managers (from the NWBC) to manage the Solution Manager info and it is only useless for the IT Administrators...
Thanks in advance,
JonHello,
You can run report RSMSY_REPORTING01 to get the details that you are looking for you will have to work with the selection criteria.
Chad -
Solution Manager monitoring of Standalone Gateway.
I have been advised this is possible with the sapccmsr, which we have running on our java estate, I have registered the program, and seem to be having a problem getting it to recognise the fact there is anything to monitor?
We have Aix 5.3
SAP gateway is from the Netweaver 2004s kernel.
SAPCCMSR is
CCMS version 20040229, 64 bit, multithreaded, Unicode
compiled at Aug 24 2008
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patch text patch collection 2008/3, OSS note 1129577
patchno 175
Solution manager is patch
ST 400 0016 SAPKITL426 SAP Solution Manager Tool
ST-PI 2005_1_700 0006 SAPKITLQI6 SAP Solution Tools Plug-In
Not sure why, any ideas?Hi Paul,
I would suggest to move this thread to the general SolMan forum, because it's not a VAR specific question.
Do you agree?
Best regards,
Ruediger -
Send Solution Manager monitor data to ITM (IBM Tivoli Manager)
Hi all,
I've recently installed a SAP Solution Manager 7.1 SP10 system in order to replace the old Solution Manager 7.0 system. The old system was (also) used for (CCMS) monitoring. A subset of the gathered data was sent to ITM (company policy and mandatory). With SolMan 7.1 SAP has drastically changed the way they monitor. CCMS/RZ20 (agent based) is no longer used (although it is still possible).
In the TX /nSOLMAN_SETUP I've done the "System Preparation", "Basic Configuration", "Managed System Configuration" and "Technical monitoring", installed the CA Wily introscope EM, Bytecode agents etc. I can see monitoring data in my Solution Manager system.
My question now is, how can I get (a subset of my) monitoring data from my Solution Manager system into ITM? How can I select only the for ITM relevant data, for instance file system full or failed database backup?
Many thanks!
/Marcel KuijperHi Marcel,
Pelase check out the How-to guides at the following SAP link:
http://wiki.scn.sap.com/wiki/display/TechOps/System+Monitoring+-+How-to+Guides
and SAP note 1965064 - SolMan 7.10 SP10 - MAI OS/SNMP Adapters
Regards,
Roland -
Can Solution Manager monitor TIBCO system
Hi there, can solution manager be configured to monitor TIBCO system - such as if certain services is running on TIBCO, check it's file system size, read files and check for Errors...etc?
CeciliaHi Craig:
More questions. Would Solution Manager 3.2 or 4.0 be able to do it without the adapter?
Regards
Cecilia -
Solution Manager Monitoring Table Size
Hi Gurus!
Question for you!
Is there a way to monitor the size of a table, or even the number of registers that it has, or anything like it?
The problem is that in several ocasions the size of tables gets too big that we end up having to delete old information or archive them, and I wanted to know about this before it becomes a problem.
Thanks in advance and BR,
LucasHello,
Did you check this link http://help.sap.com/saphelp_nw70/helpdata/en/f0/02a63b9bb3e035e10000000a114084/frameset.htm on sap Help portal.
Hope this will help.
Regards,
Benjamin -
Solution Manager - Monitoring - Instance Status
HI all,
I'm trying to configure in "setup system monitoring" the alert on "Instance Status" but is always in staus "Alert is active but not accessible".
The others alerts work fine.
I have already configured the ccmsping in rz21 and in rz20 everything is ok.
Thanks in advance for any suggestions,
AndreaHi,
If you want to monitor the Availability status of the instance then check the below docs
[http://help.sap.com/saphelp_nw70/helpdata/EN/38/9e100dd7980fffe10000009b3810a5/frameset.htm]
[CCMSPING config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/d547f687-0901-0010-07a9-ce64cc044215]
[CCMS Agent config|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/40ef0688-814a-2a10-afb1-89b40d83d0e0]
regards
Naveen
Edited by: Naveen Kumar on Dec 15, 2009 1:07 PM -
Solution Manager System Monitoring of a CE 7.10
Hi
I am trying to setup a Solution Manager Monitoring Solution for a CE 7.10 Enviroment.
I have already setup CEN in SOLMAN.
I have registered CE Systems with a sapccmsr j2ee agent.
I have setup the JCO RFC Connection in CE.
I have created the TCP/IP Connection to the JCO Connection in Solman.
I have set the TCP/IP Connection in RZ21 as the J2EE Customizing Destination.
The solution involves only 1 Logical Component with 3 CE Systems.
When I go to the solution manager setup and try to configure the MTE Nodes for my solution I cannot get the MTE context while clicking in Activate Monitoring for other Software Components
I choose Java Application Server, choose my server, choose CEn but when i have to choose the context of the MTE i get an empty list.
IF i go Activate Monitoring for Other Servers and choose the server I get the contexts of the remote server, but I can only choose one.
So how can I see the context of the CE servers in the Software component part?
Ty.Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way? -
SOLUTION MANAGER- alert doesn't exist or not accesible now
I execute transaction solution_manager and I chose productive system in the User defined Alert I created alert "Erroneous Fax & e-Mail (client 300)" and I copy in the Alert long name MTE name which I obtained form rz20 source monitoring system and ... so on
It sould work but in one system I received "alert doesn't exist or not accesible now"
Can somebody help
ThanksHi,
Can you provide me the solution for this issue. Even i am facing the same issue while configuring the solution manager monitoring set up.
Thanks in Advance
Suresh -
Hi SAP Experts,
I am working on SAP R/3 4.6C version. We have Solution Manager monitoring the systems. The Solutions Manager keeps sending the alert messages about the working status of the system. The Alerts are as follws:
- Oracle Buffers Buffer cache
- Dialog ResponseTime
- Dialog FrontendResponseTime
- Dialog DBRequestTime
- Dialog Dialog FrontEndNetTime
- Dialog LongRunners
- Paging Page_In
- Paging Page_Out
- CPU_Utilization
Can anyone tell me the reason for these alerts and the solutions that need to implement to fine tune the system to avoid these Alerts.
Your help will be greatly aprreciated.
Regards
Vanitha DorcasHi,
Have you performed an EWA ? It should contain a brief suggestion about each issue.
Br,
Javier -
How to monitor all SAP Server through solution Manager?
Dear Friends,
How to monitor all SAP Server through solution Manager?
Is it possible if yes then how? Please forward configuration and transaction also.
Please help me as early as possible..
Thanks,
Regards,
SachinHi sachin,
You can monitor your sattilite systems through solution manager.
If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
After that you can include the systems using tcode <b>SMSY</b>.
For configuring the systems we have lot of phases its very difficult to explain here.
Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
i hope it will help you.
any issues post it.
kiran kumar.v -
System Monitoring in Solution Manager
Friends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
GnanaFriends
1.System monitoring for one of the satellite systems has been configured in solution manager (through DSWP - Setup system monitoring) using RFC connections(Read and Trusted RFCs generated in SMSY).
2.Installed CCMS Agent on the satellite system and registered to solution manager system.
RZ21 -> Remote Agent Status shows online.
Should something else to be done (settings, background jobs, configuration )in Solman or satellite system to make communication to satellite via CCMS agent primary for system monitoring?
How do i get to see the satellite system's monitoring context in Solution manager?
Please help me out
Thanks
Gnana -
Wily Introscope is not running in Solution Manager 7.1 and tech monitoring
Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best RegHi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman -
Regading PI monitoring setup in solution manager
Hi Folks,
I am new to solution manager and I need to setup PI monitoring setup in solution manager...
I read some blogs and docs but not getting clear idea. all the remaning setup has been done in solution manager and only need to configure the technical monitoring thing in solution manager...
Please help me on this step by step guide...
Thanks,
SreenivasHi Hareesh,
Thanks for your reply.
In Solution manager if I opend the technical monitoring I am getting below screen..
Can you please tell me what are the steps I need to do... For first i want to test this with one file communication channel later I will do remaining channels.
I am new to this setup.. help me on this..
Thanks,
Sreenivas -
Monitoring PI Integration Server in Solution Manager
I am trying to set up monitoring the PI Integration Server in Solution Manager. The issue I am having is assigning the auto-reaction methond in solution manager. I am unable to assign as it is not modifiable in Solution Manager. I am able to change in PI system, but do not want to do it there. Has anyone done this and can you guide me to steps/documentation ?
Hi Alexey,
everything you need to know is in the "SAP Solution Manager operations"
document under
http://service.sap.com/solutionmanager
-> Media library
-> Documentation
if you have problems with the communication between the SLD and the SolMan
check document SAP Solution Manager Landscape Setup Guide
under http://service.sap.com/diagnostics
-> Media Library
and note 1148028 - Setup SLD in the scope of Solution Manager 7.0
If you are curious about the SLD architecture in general you can also have a look at
http://service.sap.com/sld
regards, Javier
Maybe you are looking for
-
I used to be able to print my bank statements directly from the website to my printer. Now the print program sends the file to a file with a "cgi" extension and saves it on my desktop but as an Adobe file. When i open it to print, Adobe says it is no
-
IMac won't boot from HDD or CD. Help!?
Hi, I recently came back from holiday for a couple of weeks and sat down to start my iMac (24" C2D). The machine just sat at a white screen and wouldn't go anywhere. Thought, ah, I'll just reset the PRAM (unplugged power cable for a min or so), and s
-
Document in Multiple curriencies
Hi gurus, i need to know if there is a way to display a document in a currency of our choice which is other than the local currency and the document currency... suppose local currency = SAR document currency = USD and i want to the display document u
-
What map app works on iphone 4
I updated my 4 to OSI6 and now need a map app that works.
-
Need to check the data flow from R/3 to BW server.
Hi BI experts, This query is regarding need to check the data flow from R/3 to BW server. As of now I have some set of reports which I would need to take up in BW. The requirement is to go through the list of transaction codes for reports in R/3 and