Solution Manager - Post_installation issue

Hi -
I've finally been able to install Solution Manager 7 w/MaxDB on a Linux box. I am now on the post-install steps where it is asking me to logon to the Application Server. I am assuming I should be able to use Firefox or IE using the URL
http://<hostname_of_J2EE_Engine_Server>:5<Instance_Number>00
How do I figure out what the hostname of the J2EE engine server is?
Should simply be this correct?:
/usr/sap/OSM/DVEBMGS00/SDM/program
[root@atl-osm-01 program]# hostname
atl-osm-01
and my instance number should be 00 right?
However, when I put in http://atl-osm-01:50000 into internet explorer I just get an error message saying that "Internet Explorer cannot display the webpage".
Are there any logs I can look at? Or what is the solution to this? Am I putting wrong info into the URL?

Hello,
Have you set the profile parameter ICM/HOST_NAME_FULL
It needs to have the value of the fully qualified Host name.
This parameter is not set by default, so it needs to be maintained.
You can get more information on setting this parameter in SAP Note 434918.
Are you putting the wrong information into the URL.
What I see is not a Fully Qualified Domian Name
If you look at http://atl-osm-01:50000, all you have specified is the protocol - HTTP://
The Host name " atl-osm-01" and the port 50000
What iis missing is the company and the domain
So it should have the format http://host.company.domain:port
You need to use the fully qualified domain name, and you should also set the Parameter ICM/HOST_NAME_FULL
to the FQDN too, as this will help when accessing Business Server Pages (BSP)
Regards,
Paul

Similar Messages

Solution Manager Upgrade Issue for "Business Process Monitoring"

Hello,
We had upgrade Solution Manager 7.1 SP08 to SP11.
Earlier our BP Monitories were working fine which are not working now, also we are not able to use function “Load Monitor”.

We are facing below major issues
1. No system in Logical Component
2. No RFC destination found
3. Unable to load Monitors
Also the BPMon configuration is not working post upgrade
Kindly help us to resolve these issues.

Solution Manager ChaRM Issues when Upgrading Satellite System

When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
1. Normal Correction (In Development) Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
2. Landscape is changed to Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
3. Normal Correction moved to To Be Tested -> Consolidated -> Production
Will the Normal Correction be in error because the landscape changed for the iBASE?
Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
Thank You,
Carlen
Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

Thanks Subhashini!
We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
Thanks again!
Carlen

Solution Manager RFC issues

Hi Folks,
We are facing problem with RFC connection from Quality to Solution Manager. It says " No authroization for trusted system" however the RFC connection from Solman to Quality is working fine.
in SMSY -> RFC connection test working fine and able to fetch the qas to solman system. We have give all required authorization including SAP_ALL, SAP_NEW and S_RFC_XX Objects also assigned.
It would be of great help if some one can help us on this.
Regards,
Vinod

Hi
Please check the "Troubleshooting in Trusted/trustng system" part in below link
[http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm]
Hope this help to fix the issue,
Thanks,
Jansi

Solution manager Authorization issue

Dear all,
We are maintaining a enterprise solution manager.
we maintain all our SAP clients issues which is posted in our solution manager.
Now the issue is if the clients login in to our solution manager to see the issue status, they are able to see all the clients issues which is posted.
but we want to restrict the authorization not to see other clients issues which is posted in our solution manager.
we want them to see the issues only which is posted by them.
Please give me if there is set of authorization to do this.
Regards
Prakash

HI,
From ur post, I think u have provided authorization to access the tcode crm_dno_monitor. In that case, u cannot restrict him to see all other messages. If u want to restrict the authorization, create a variant with necessary inputs which shows the result ur customer wants to see and assign that to his favourites. Only provide access to call that variant.
Rajeev.

Solution Manager upgrade issue on Linux

Hi Alll,
Need your inputs/thoughts on this issue.
We are planning for Solution Manager upgrade from 3.1 to 4.0 and for this the setup and plan is as below:
The production data of the solution manager has been copied as a VMX FILE(VM Player) file on to a test server and we have plans to upgrade that and check and then upgrade on the production system.
The test machine has got a different IP address and hostname. From the test machine when I start the sap instance its affecting the Production machine and dueto which the production will not work until I stop the SAP Instance on the test machine.
It cannot be a IP conflict or hostname conflict as we have them differently on the test machine. But still there is an issue. The IT dept says the issue is with the starting up of the instance and we dont know where to see what exactly is the problem.
I am new to upgradation stuffs, this is my 1st assignment and I am not sure from where to start!!
Can anyone of you tell me where to check for the details?
SOLMAN is installed on a unix machine with oracle 9.2 and we are planning to upgrade it to SOLMAN 7.0
any suggestions on where to look out for the possible issue?

Hi,
I did this a lot and know the side effects a little.
My recipe:
1. Start the copy without network and manage it from the VMWare Console. Change the IP address and make sure all references to the hostname (DNS and /etc/hosts) point to the new one. I hope you're working consistently with hostnames and no IP addresses.
2. Configure the firewall (iptables) on the copied system to block all requests from and to the original production server. If there is any communication with other SAP servers (like monitoring agents, SLD, or others) block this too!
3. Re-enable the network in VMWare.
Alternatively: Can't you simply put this in a VLAN or a real seperated network with just the server and a management workstation?
Hope that helps..
Nikolaus

Solution Manager BPR issues

Goodday,
Since there is no specific Solution Manager forums yet i will post my question here:
We are working with Solution Manager 3.2 to support an implementation of MySAPERP 2004. Within the SM there is the functionality to use the Business Process Repository to create your business process and automatically get the IMG objects (configuration tab)and transactions when selecting a process.
Currently our BPR content is ICO 150 so the newest one currently available. But when we start the BPR we see processes for SRM,CRM,R/3 4.6c,R/3 4.7 and more. We see very little specifically for ECC 5.0
I was told that the current 150 content does not contain all processes for ECC 5.0 yet. I would like to get a confirmation of this and would like to know if the 160 content (release march i believe) will have all the content.
Secondly i am wondering if there is a way to limit what people see in the BPR. Our config team is very confused on which process to select since every process exists multiple times.
Thirdly i would like to know when there is no ECC 5.0 process available should you then just use the available 4.7 or 4.6 process.
Thank you very much for your help

Hello,
as this is an 'old' topic (from January), I am kindly asking you to tell me how did you solve the problem?
I am interested in BPR content as part of Solution Manager. We also see processes for SRM,CRM,R/3 4.6c,R/3 4.7 and more. We see very little specifically for ECC 5.0
I also would like to know if ICO 150 or 160 packages have the content or is there another way you solved the problem.
Thank you and best regards,
Nikolina

Solution Manager - eCatt issues during rec/exec of SAPGUI based scripts

Hi all,
after the last support package set up I started to encounter some problems during the recording and the execution of test scripts based on SAPGUI command.
During recording:
First time I try to record a transaction, after selecting SAPGUI command-->start recording; prompted to target system I try to logon, but obtain an error;
Second time the recording process goes on, but it happens that the system creates more than one window describing the new session's data (the windows has title "Record SAP GUI Command" and subtitle "New Session with Following Data was created")... Another one of such pop up is created even if I create another session of the target system...
During execution:
The first time I try to execute a test script which begins with a SAPGUI command the script fails with the following error:
Target Sys Zssssss_een->een_ccc->een (Target Sys Zssssss_een->een_ccc->een)
Error in eCATT command SAPGUI
Error when Starting Replay Session. Possible Causes: 1. Scripting Is Deactivated in Replay System.
2. User Has Not Logged On Within 00:00:45 Hours or Has No Dialog Rights. 3. Too Many Session Are
Open.
If I try to re-execute the same script a second time, everything goes fine, and I can complete script execution.
Does anyone have encountered similar problems?
Thanks in advance for any solution/suggestion,
Maurizio

Hi Francesco,
Thanks a lot. But we have already resolved the problem. The error was in the ecatt script. In tcode secatt, after recording, the script included the rfc destination which was to be removed manually.
Regards
Sapana

Solution Manager - SLD Issue

Hello,
I am planning to setup a Solman for a large system landscape of nearly 150 systems consisting of both ABAP & Java. System information will be collected by means of using SLD in Solman.
Issue: Few systems are part of another landscape also and they do REPORT to its own seperate SLD.
As per the new Solman setup I want the systems that belong only to my landscape to report to the SLD of Solman. How do I do that?

Hi
My understanding is that you want only systems which are in a speacific landscape to use your SOLMAN SLD setup.
1.Host all the new systems(not a part of any other SLD) to your local SLD on SOLMAN
Hope you know how to do it.If not feel free to ask.
2.If you dont want other landscape system to use earlier SLD .Then you can actually remove them from there and add to your SOLMAN sld
3.From doing step 1 and 2 .Go to visual admin .In the server node go to services.Expand it and then go to SLD data supplier and give the details of SOLMAN (on which you have configured the SLD).
4.Perform data transfer test.If its successfull .Your Job is done

Regarding this issue in the configuration on smsy in the solution manager

hai all,
i am havig an issue when trying to configure the smsy in the solution manager
the issue is
Invalid user s0001234567 when calling SAP Backend system
all the rfcs related to the oss is fine
i had maintained the user in the aisuser tcode correctly
and then i router is finly working
software component : st is 400 kernel and level is18
hope all the experts of solution manger help me
thanks & regards
praveen kumar

Invalid user s0001234567 when calling SAP Backend system
Is it a valid S-USER?
Use valid S-USER and update the user details in AIUSER.
Regards,
Nick Loy

Runtime Errors Raise Exception in Solution Manager

Hi Guru's,
While I try to excute the transaction solman_issue_mgnt in solution manager for issue tracking, runtime errors occurs.
Error analysis
    A RAISE statement in the program "CL_GUI_HTML_VIEWER============CP" raised the
     exception
    condition "CNHT_ERROR_PARAMETER".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
Could anyone suggest me on this issue.
regards,
Guna

Hi Juan,
As per the note, everything was fine there. We have SAP_Basis 700 with SP16.
Earlier it was worked fine. Now only we are facing this issue while excuting the t-code solman_issue_mgmt.
regards,
Guna

Use of CRMD_Order with Solution Manager

When you create a change request through the CRMD_order how do you link it to a business process structure in Solution Manager? Through custom fields? Or are you obligated to start the initiation of a change request within solution manager through issue/message tab in configuration (SOLAR02)?

I do not know if anyone can confirm this , but I finally was able to assign the business scenarios from my business process structure to the solution with the source project.
(For those interested you have to go into transaction DSWP, Select Solution Landscape, go into Solution Landscape Maintenance, select your solution structure on the left side of the screen and get into business scenarios, make sure you are in change mode, then use the download under scenario name to select your scenarios).
When I create an issue and this is what I hope someone can confirm, go into context and add a business scenario, it doesn't show in SOLAR02 under the issues/messages tab.
This is somewhat inconsistent, as when I create an issue out of SOLAR02 it does assign the business scenario automatically and obviously will show in the list. I am not sure why it doesn't show when I create the issue out of DSWP.
Thanks
Paul

Extraction of solution manager ticket content

Hello Experts,
I need to extract the content of each ticket recorded in solution manager including Issue descriptions, solutions recorded in the ticket etc. May I know if there is any standard report or if they are stored in a transparent table?
Thanks a lot in advance!
Susan

Hi Andreas,
thanks for posting your opinion to the topic. What I´m looking for, is the right link to support a process driven SAP-implementation process. The question is, which is the right tool or repository to collect implementation know-how and information about SAP-defined or in anterior projects defined individual business processes and the enabling systems, transactions, services ...
There is such functionality in SAP Solution Manager.
Are there other products, repositories I have to look on, or do you think Solution Manager is the organisational SAP-governance plattform to link implementation methodology, business processes, configuration and functionality?
I´m not believing in anything in that question! I´m only looking forward to your individual opinions about that issue to form a view on it.
Thank you all!
Jens

Service desk issue in Solution manager

Dear Friend's
I have configured Service desk in our Solution manager .
Solution manager version is 7.0 , on windows 2003 & oracle 10.2.0.2.0.
I am able create messages in our satilite systems . And sending to solution manager also.
Here issue is , when I click on send button in created message box , then our satilite system will asking password of basis user , which is present in solution manager. If I entered that password then It shows successfully send message with number.
I want's to skip the screen , where it's asking the basis user ,password.
So please give me solution , If you come across this problem.
Thanks in advance,
R.k sindol
Edited by: Raj kumar sindol on Jan 20, 2009 3:30 PM

Hello Raj,
see SAP Note [153743|https://service.sap.com/sap/support/notes/153743] chapter "In the R/3 system of the notifier (customer data entry systems).". Changing that RFC destination should be the solution for your case.
Best regards,
Andreas

Early watch Report issue in Solution Manager

HI
I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty
Workload and Performance Analysis
Exception Analysis and Change Analysis
and one more issue for our production system the EWA report status is showing Not Productive
Thanks for your help
Harish

>
Harish Kumar Jaiswal wrote:
> I have configured the EWA report for system in Solution Manager 4.0 and report is generating but the issue is in the report EWA for Solution following section remain empty
>
> Workload and Performance Analysis
> Exception Analysis and Change Analysis
>
> and one more issue for our production system the EWA report status is showing Not Productive
Please check, whether the managed system is well prepared.
It requires add-ons ST-PI and ST-A/PI, data in workload statistics ST03N.
Run RTCCTOOL via SE38 and check the results.
See SAP Note 91488
Ruediger

Solution Manager - Post_installation issue

Similar Messages

Maybe you are looking for