Solution Manager prepared for the Remote Service Delivery?

In preparation of GoingLive Session, we received a mail with some questions. Among them the following:
Is your Solution Manager prepared for the Remote Service Delivery? Yes/No
Is the solution transferred to SAP?: Yes/No
What does the first question mean? what should be done to prepare the Solman for session delivery?
How do I check if the solution is transferred to SAP?
Thanks a lot,
    Dino

Hello Dino,
The SAP Solution Manager is a platform for the delivery of services for the following areas:
●     Risk minimization
●     Optimization of SAP solutions
●     Knowledge transfer
Services in the SAP Solution Manager are services which help you to monitor and optimize the performance and availibility of your system landscapes and minimize your system operation risks.
You can have the support services performed by SAP or perform them yourself:
●     Remote Services
SAP experts deliver this service type via a remote connection (SAP Safeguarding Services, e.g. SAP GoingLive Check).
For checking whether solution manager is prepared for remote service delivery u need to check the following.
Prerequisites
You have:
●     created a solution.
●     set-up a connection to the SAP Service Marketplace (Explorer).
Procedure
       1.      Choose the transaction SOLUTION_MANAGER.
       2.      Choose Delivery of SAP Services ® Service Plan, in Operations.
       3.      Choose Order Service from SAP.
You go to the Service Catalog.
       4.      Choose the link to the service.
The system goes to the catalog entry of the service, in the SAP Service Marketplace.
       5.      Follow the procedure described in the SAP Service Marketplace.
=============================================
Solution transfered to SAP means that the u have done the configuration, testing and validation of the SAP system components and then transfered this to the satellite systems connected to Solman. Please note that solman is the central point of access for supporting implementation activities and the satellite systems are SAP systems comnected to solman in the landscape.
Hope this helps. Please assign points and let me know if u need anything specific.
Rgds
Manish

Similar Messages

1405975 - Minimum Authorization Profile for Remote Service Delivery

In the document described in the header SAP Customers are asked to provide a logon user for SAP Remote Service Delivery.
Due to security concerns, customers wish to grant restricted authorizations only.
The minimal autorizations required have been described by SAP in a Z_BASIC_SERVICE_V1.zip file.
Its there that I noticed the requirement for the SE93 transactioncode.
With SE93 you can assign transactioncodes to your account and create new ones.
I realy can't match this requirement with 'restricted autorizations only'.
Am I missing something?

Hi,
If you think SE93 authorization should be restricted, then you can remove this from the role. As far I know, SE93 authorization is not necessary for remote service delivery. It is one of the 'good-to-have' authorization not the compulsory one.
Regards,
Vivek

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

Solution Manager key for ERP upgrade for the same system ID on a different

Hi there,
We have migrated our R/3 DEV system (4.7) running on Windows 2003 to 64 bit and copied existing system using system copy for testing ECC 6.0 upgrades. Both the DEV systems, with the same system id, will be available for a short period. However, the new system, which also has same system id i.e DEV is not created in the Solution Manager landscape, as the system id with the same name already exists. Both the systems are created in SLD.
Can anyone clarify whether i can create the license key from the existing DEV system and use the same key for upgrade of DEV system running on different server? If not I will have to delete the current DEV system and create new DEV system running on 64 bit.
Thanks in advance,
Regards
Chandu

Hi,
You cannot use the old solman key as systems are on different server.
I think you have to delete the old Dev system and then generate new solman key.
Thanks
Sunny

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Completely different AMF request packets for same remote service call from Flex to PHP using ZendAMF

I was trying to debug why one of the remote-services in our Flex application was failing randomly. What I found was interesting. Completely different AMF request packets were sent for same remote service call from Flex to PHP.
When the service call succeeds the AMF request packet looks like the following:
POST /video/flex/bin-debug/gateway.php HTTP/1.1
Host: localhost
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15) Gecko/20110303 Firefox/3.6.15
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 115
Cookie: PHPSESSID=j6u30i8uu6c3cvp8f4kipcpf05
Referer: http://localhost/video/flex/bin-debug/main.swf/[[DYNAMIC]]/5
Content-type: application/x-amf
C    ontent-length: 305
Flex Message (flex.messaging.messages.RemotingMessage)     operation = getMemberFromEvent    clientId = 2F997CD0-7D08-8D09-1A9B-0000422676C8    destination = MembereventService    messageId = B46AB58D-2241-83F0-41E4-9FE745565492    timestamp = 0    timeToLive = 0    body =     [      280    ]    hdr(DSId) = nil
And when the service fails the AMF request packet looks like this:
ServiceRequest: getMemberFromEvent; RemoteService; getMemberFromEvent
(mx.messaging.messages::RemotingMessage)#0
body = (Array)#1
    [0] 250
clientId = "1AA4FAAB-AEA5-8109-4B0D-000002B3A9A1"
destination = "MembereventService"
headers = (Object)#2
    DSEndpoint = (null)
    DSId = "nil"
messageId = "2F92E6C0-FE92-A09B-B150-9FE2F28D9738"
operation = "getMemberFromEvent"
source = "MembereventService"
timestamp = 0
timeToLive = 0
Also, following is the error message on Flex when the service fails:
{Fault code=Channel.Call.Failed, Fault string=error, Fault detail=NetConnection.Call.Failed: HTTP: Failed, Destination=MembereventService}
We are using Swiz as the micro-architecture for Flex development and Zend AMF for remoting between Flex and PHP.
Any ideas what is wrong here, what is causing Flex to send different request packets for the same service & what I can do to fix it?

Hi, I know that your post is almost 5 years ago, but have you found the solution to this issue?
Thanks.

EP 7 systems in Solution Manager 7 for EWA activation

Dear Expert,
Greetings from Partha.
I need to include our EP 7 systems in Solution Manager 7 for EWA activation. Current lanscape scenario
Solution Manger 7.00 Installed
EP 7.00 Installed
No central SLD configured and all the system have local SLD.
1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
Help will be appreciated.
Regards,
Partha

1. As per the installtion guide & SAP notes we need to install
a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
b> Diagnostics Agent in every manged system(s).
For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
--> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
--> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
--> <choose operating system of managed>
Our Solution Manager 7 is already installed and @SPS 17. My question is
1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
If it is different then kindly let me know what are the DVDs to be downloaded and from where?
Check the pdf attached in note 1234387 - Inst. 7.1 EhP1 - Diagnostics Agent installation
If you have SP17, you must follow note 1357812 and install Diagnostics Agent 7.01 SR1
2. In our Managed System SMD installtion we have decided for
--> Installation Strategy as Direct Solution Manager Registration
But what strategy we should take for SMD installation on Sol Man 7 that is
Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
It doesn't matter what strategy you'll decide. You could decide Direct Solution Manager registration
3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
As you have solution Manager SP17, you can't install Saphostagent 7.11 and for this reason you can't use SAphostagent.
Agent 7.01 => No Saphostagent
Agent 7.11 => Must install saphostagent
Agent 7.20 => Already have SAPhostagent installed

The grace period for the Remote Desktop Session Host server has expired

<p>I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me please

Hello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen

BW Upgrade - Starting Prepare for the First Time

Hi,
I'm starting the prepare for the first time and I received this message "You must be BD2ADM to run this command." I login as BD2OFR.
I'm trying to upgrade our BW 3.1C with kernel 640 to NetWeaver 2004 SR1.
Do you have any solution for this problem I cannot continue with the prepare.
Thanks,
Ramon

Hi Ramon,
I ran into the same error ... (but it was very late night and therefore I don't know if I did something wrong and I forgot to talk to SAP on this)
But:
- For the 7.00 Upgrade you NEED sidofr and not sidadm!
- I used the following workaround - run with sidofr -:
SAPUP UPGDIR('/usr/sap/put') PARMLIST('check')
(instead of prepare - which is the same - with this trick the first error message was "skipped")
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de
P.S.: Sorry SAP collegues, that I didn't mention this issue, but I'm always (when it is not midnight) using the SAPup-prepare above and therefore rarely see this problem.

Verifying the Workflow Configuration - does not appear for the workflow services.

hi!
the services for the workflow services is not in windows service, I´ve installed workflow manager and correctly configured, service bus correctly configured etc
verify

Which self Service function you are using to change the assignment ?
Their are two API to update asg values. Try to apply user hook on both of them and retry ur scenario.

Solution Manager Key for Java AS

I'm new to SAP Netweaver so maybe this question has been answered before.
I need to install SAP Netweaver AS Java for development/QA purposes. I understand that I need also Solution manager key for installation so I installed another Solution Manager System.
When I enter to Solution Manager http://<server>:50000 I get "System Landscape Directory is not accessible. Only local system can be administered". What does it mean? I remember I chose to create local SLD.
I saw also in couple of threads the following:
Just go to transaction SMSY transaction of solman and locate the system for which you need to generate Solman Key and just right clilck on that system...You will find the option of Generating Solution Manager Key....
I don't have such an option when I enter to Solution Manager.
Any suggestions?
Thanks,
Haim Beyhan

Hi,
For Solman key generation refer the link below, which has the screen shots.
http://www.saptechies.com/step-by-step-procedure-to-generate-solution-manager-key-smsy-solution-manager-40/
Regards,
Ravi

SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
Marco

Hi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini

How to prepare for the update to Gingerbread

What should I do to prepare for the Over The Air (OTA) update?
I will have my battery charged to 101%.
I will backup my Contacts no matter what. It took me to long to get then straightened out!
I will backup my Photos and Videos???
I will backup my Music?
NOW HERE ARE SOME QUESTIONS.
Will all the APPs that I have installed from The Market be deleted???
What else should I backup before the update???
Is there anything else I should do before the backup???
Thanks folks,
JerryF

If you want to do a refresh for the os update by Factory reset. Then.
1. Make sure you know all your passwords to any app services. game services, music services ect.
2. SD is unaffected, most apps should be installed there anyway. IF developers did it right, all that is needed is a app redownload and a small file restore to games ect. THe gamedata, main files should already be on the SD. Very helpful for large games like order and Chaos online which is a very large MMO RPG. Instead of downloadign over a gig of data, it will patch 108mb, and check exsisting files only.
3. Backup contacts to verizon if you want, that is good for switching to any phone such as a non android phone. OR emergency back-up. COntacts backup to SD will only contain the name and number.
4. Programs or data that are installed on the main storage and not SD can be backed up with Backup pro or a similiar app. Then restored as it was with any related data.
5. Android has smart updating when it is OTA or from SD. Because it maintains file structures, it doesn't need to alter other exsisting stuff while it overwrites the OS kernal, Radio data, ect...
The only real issue you may run into are older apps no longer compatible with gingerbread. Same applies to ICecream testing. Icecream uses the basics of gingerbread but is scalable. The interface has been simplified and adjusted so it can run on an drid and android device. At teh core its still gingerbread modfied to run basic or run with full effects. SO if leaks or official ICecream hits all phones which is what google wants eventually, it is very adaptable across all phones and tablets.

Installation Solution Manager error in the step Import Abap

We are installing Solution Manager but in the step import abap, appear
the error:
/usr/sap/SML/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/SML/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SML/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SML/SYS/exe/run/R3load: END OF LOG: 20091202234420</message>
I appreciate your help for this problem
Regards.
Ricardo Rivas

Hi,
Check SAP note 898181.
Thanks
Sunny

Sendgrid addon "The management portal for the add-on isn't available right now. Please try again later"

After adding the Sendgrid Addon, when we go to the "Go to the SendGrid web site for the next steps" link, we get the following error message: "The management portal for the add-on isn't available right now. Please try again later."
Best regards,
Joe Boren

Hi,
If you have successfully purcasedAdd-on SendGrid, but it is not available, I suggest you contact with support, it's the best choice for you.Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/ Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a
support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Solution Manager prepared for the Remote Service Delivery?

Similar Messages

Maybe you are looking for