Solution Manager storing ECC's ST03n data - is this possible?

Hi All
Currently we keep the regular 3 months worth of ST03n data in our ECC System and there has been a request to keep more than the the 3 months. So as we don't really want this data in ECC we would like to take it out and have in in Solution Manager, this means that would then keep up to a year if necessary.
Can anyone let me know if this can be done and how?
Thanks all in advance.
Phil

Hi Phil
You can configure your ecc st03n data to show-up in solution manager at run time (i.e. latest data), which will again be lost after three months.
However, if you do it this way, it is easier to write a script that can extract the data from solution manager and store it on disk etc.
Thanks,
Jayesh

Similar Messages

Is it a must to use Solution manager for ECC 6.0 upgrade

Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

Hi,
I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4.
I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
Any docs out there for this?
Thanks!
I figured it out... i had to add the R/3 Enterprise logical components to my system landscape. After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
Never mind!
Edited by: Tom Janes on Sep 9, 2009 12:52 AM

How to install both solution manager and ECC Development on same server

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

How to install both solution manager and ECC Development

Hi All,
Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
Pls let me know.
Regards,
Karthik

Hi Karthik,
I try to answer you message, my answer may not be sufficient for you.
Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
Verify sizing of both systems.
SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
Best regards,
Ruediger Stoecker

Connection Between Solution Manager and ECC

Dear Techies,
I would like to install SAP Solution Manager in one laptop and ECC on another laptop. Both the laptops have very good configuration in terms of operating system (both have server editions) , RAM ( 8GB each) and Hard Drive ( 600 GB each). Once the installation is completed, is there any way that I can establish connection between both the laptops over the same internet/wifi ? I would like to ensure connection is established successfully and data transfer is happening between both the systems. Many thanks for your answers in advance.

Hi Arun,
Please check below -
Create A Quick Ad Hoc Wireless Network Connection Between Two Computers In Windows 7/Vista
Best Regards,
Tanmeya

Solution Manager Diagnostics don't display data

Hi,
I'm setting up Solution Manager Diagnostics at Solution Manager SP 22. I've installed Wily Introscope Enterpise Manager at Solution Manager Server, and Wily Introscope Agents at Solution Manager and Satellite systems as well.
Wily Introscope is working properly, I receive statistics from all agents, and also I can see most of the graphics. BUT, after I install SMD Agent, I can't receive any data in Root Cause Analysis Workcenter -> End-To-End Analysis -> system -> Workload Analysis.
Here I can see a plot with all values at 0. If I try Enterprise Portal tab -> Portal Activity Reporting, I don't have any data.
At Aplication Server Java tab -> J2EE Engine, I only can see forms like:
     E2E CV PPMS ID Variable
     E2E Installation Number Variable
     E2E SID Variable       <SID>         <SID>
     E2E Metric Type Variable(multiple values)
               SERVLETS
               WEB DYNPRO APPLICATI ONS
               JCO CALLS
              SQL STATEMENTS
InfoProvider
              0SMD_PE2H
              0SMD_PERH
But if I execute or check this form, I receive this message:
Value "SERVLETS" for variable "E2E Metric Type Variable(multiple values)" is invalid.
I've also followed SAPNote 1435043 - E2E Workload Analysis - No applicable data found, and checked prerequisites, RFC's, Jobs, Extractors and executed SOLMAN_SETUP transaction.
I've followed all guides I've found for Diagnostics, but I don't know how can I solve this.
Please, could you help me?
Thanks in advance and regards.
Tomas.

Hi Tomas,
I have exactly the same problem, I am on Solman SPS22, LMSERVICE SP06 patch2.
and the satellite system pre-requisites and definition in SMSY are correct, also the MDX PARSER RFC is wrking fine.
any idea on why is the Portal activity reporing is blank, while i get data under all the other tabs.
Also, the agent application .log file shows the below warning
"PadcService@1cbd1cbd: file portalActivity_6057051_1278074505498.txt could not be deleted"
but i could not find the file in the satellite system.
Regards,
kaustubh.
Edited by: Kaustubh Krishna on Jul 12, 2010 11:21 AM

Solution manager 7.1 Wily (no data available in the BI)

Hello, I am using solution manager 7.1 SP08 on hp/ux with wily 9
There are times when Wily show 200% capacity then later show 51% capacity
Trying to figure out what going on so I click on the performance tab and I get a 'no data message in BI '
Any ideas on why no data is showing in BI ?
We are getting wily data .

Hi Kenneth,
How many agents have been connected to Wily EM ?
For Wily EM capacity problem, you may check below SAP note
1871677 - What to do when Wily Introscope Enterprise Manager Capacity is significantly above 100%
Hope this helps.
Thanks & Regards,
Nisha

How to Link Solution manager with ECC?

Hi Friends,
i am new to solution manager. can any one help me how to link solution manager with other SAP servers like ECC, CRM, SRM? if anybody has paterial for the configuration can u send me, i will be very much thankful for that? my mail id is [email protected], [email protected]
thank you,
devendran.

hi Nick thanx for you reply. i was trying your way and the pop-up asking the System name, Product, Product version and the installation number. (is it the right screen which i am opening? if it is not then help me out).
my doubt is what to give in the system name. i had given ECC500 and it is not taking. is there any specific charater to enter i this field? if it is there then where we are maintaining it?
in the product field i entered SAP R/3 Enterprise and Product Version SAP R/3 Enterprise 47x200 from F4 option.
the next doubt is what is the Installation number and what to give in that.
Regards,
Devendran

I am interested in using Bridge as an asset management tool over a intranet network, is this possible?

I'm working with a client that has an intranet and CS6 and would like to use Bridge to manage our digital assets. Can multiple computers use bridge effectively over a network?

Bridge is not designed for use over a network nor is it official supported by Adobe for that matter.
The application itself uses its data written to the user library for one computer. Some people have managed with great care and knowledge to let it function over a network but I think as soon as you let people write data them selfs from different workstations things pretty soon get bad due to not having this data available to other users.
The Image archivist is one that has succeeded to use Bridge over a network, google this name and you will find his blog

Using HR data in R/3 to create business partners in Solution Manager

Is it OK for me to setup Solution Manager to automatically download HR data from R/3 to create the Business Partners (employee role) in Solution Manager?
We have setup SAP CRM 4.0 to automatically download the HR data and create Business Partners (employee role) in CRM. Since Solution Manager has the CRM component in it, I assume we can do it as well in Solution Manager.
Regards,
Mel Calucin
Bentley Systems

We did it, i don't see the problem...

How to Call Solution Manager Tcode from ECC

Hi Friends,
I have a requirement to call the Solution manager tcode CRM_DNO_MONITOR from ECC 6.0 using a custom development
There should a custom tcode which the user can execute in ECC to call the transaction in Solution manager . Please let me know if this is possible.
Regards
Sapient

hi ,
for that you have to install solution manager on server to be avalable .
ask your basis person to do that for you .
regards
Deepak.

How to take Solution Manager Roles in ECC 6.0?

If I want some PFCG Roles from Solution Manager to ECC 6.0 then what is the easiest way should I used CUA (and select Solution Manager) as a system or what? I will be very thankful who ever will show me the right way. thanks in Advance

Hi
You can do the same in 2 Ways.
1) Make a list of all roles which are required and create TR for these and move it to ECC System.
2) Form PFCG ,download all the roles in bulk and upload the same in ECC System
Thanks & Regards,
Sandeep Alapati

Early Watch Alerts Problem in Solution Manager

Hello,
I am trying to configure EWA for my SAP R/3 systems in Solution Manager 3.2. RFC connections are working fine. EWA report that is getting generated is showing me following problem :
<b>EarlyWatch Alert - R/3 System</b>**********
<b>Download Problem</b>
We could not perform a correct analysis because essential parts of the download data are missing. The cause is probably a problem with data collection or transfer.
Recommendation: Please check the log for this session in the Service Data Control Center (execute transaction SDCC or the new SDCCN in your system). If an error entry is listed, perform the Service Preparation Check.
Implementation: To perform the Service Preparation Check, execute transaction SDCC and choose Information-> Service prep. check or if you use SDCCN create a new task 'Service Preparation Check'.
The result of Service Preparation check ( as recommended) is not throwing any error.
Can anyone help me out on this.
Regards,
Yashodhan

Hello Yashodhan Mujumdar,
we have warnings about differences in the function interface, but all works, so we ignore them.
But the missing data interface seems to be the error.
Did you read note 781680?
Do you have the newest ST-PI (2005_1_xxx SP3) and ST/A-PI (01G_xxx, this is an installation, no patch)? Do you have the right flavour of ST/A-PI?
Are ST03N and ST06 working?
Do you refresh service definitions from sapnet? Did you generate (after service refresh) on the solution manager system the includes (SPRO -> SAP Solution Manager -> Basic settings -> SAP Solution Manager System -> Operations -> Setup Service Data Control Center -> Generate Includes....
If these checks are all ok you might deactivate SDCCN both in satellite system and solution manager (SMSY -> Goto -> Solution Manager Operations -> Administration SDCCN) and activate it again.
If this doesn't work you might use the big hammer:
1) delete all the service definitions in satellite system like described in note 727998
2) delete all entries in table /BDL/_GENER (satellite system)
3) create in SolMan system a new session in order to collect and send data for this session in satellite system; if you don't see the session in the satellite system please execute there the "Maintenance Package"
4) elaborate the data for this new session in SolMan system
If all this doesn't help, open a message in sapnet
Bye
Message was edited by: Riccardo Escher

View the document in Solution Manager

I am told that there is an option in Solution Manager to have the document generate a link that can be emailed to the approver. This allows the approver to view the document in SM without actually having access to SM. The approver can then reply back to the e-mail with his/her approval after viewing document.
I am new the SM any detailed input with how to steps would really help..
thanks in advance.

Hi B_J,
it is correct, each document has attributes, on the attribute tab in the button bar, there is an icon to generate an url for the selected document. This link is stored in your windows clipboard, so you can past this link in an e-mail or wordfile. The person who gets the e-mail must have access to the Solution Manager via network, he needs no personal user in the system. The link used a service of Solution Manager(check in the Solution Manager IMG at the HTTP services). This service requires a user to read the document. If you have no user, then it is necessary that in the system a default user is assigned to the service or to its alias. Now to your second use case, the approval, you can not bring any information INTO Solution Manager, you can only answer the e-mail, with the info, yes the document is OK, but you can not set a status or an other attribute at the document, that the document is approved.
Regards,
uDo

Support desk queries on solution manager

Hi All
I have few queries on solution manager support desk functionality.
1.Is this the only way to create support desk message HELP-CREATE support desk Message from each individual system??
2.In our scenario,when we are creating the message we would like to assign component( it should be project specific component,not SAP specific component)...How to acieve this??
3.We have a requirement where the message has lot of status and fields and depending on the message processor I would like to control which status or field user should be able to view and work on...how to achieve this??
4.Need the way to send a message to the processor,as soon as his name appear as message processor.
5.I want to track all the persons involved in the message processing,how can I do this??
6.I want to use a different transaction type not the standard SLFN,so what configurations are needed??When I create a message it should automatically take properties of transaction type of newly created one??

Hello Dolores,
first of all thanks for that answer. I read it in the germany documentation help.
Here an extract:
+Anlegen von Support-Meldungen über NOTIF_CREATE
Mit der Transaktion NOTIF_CREATE können Benutzer, die in Satellitensystemen arbeiten, Meldungen anlegen und an den SAP Solution Manager versenden.
Vorgehensweise
Starten Sie Transaktion NOTIF_CREATE.
Geben Sie folgende Werte im Dialogfenster Anlegen einer Support Meldung ein:
Priorität
System/IBase-Komponente
Kurz- und Langtext
Um Anlagen anzuhängen, wählen Sie Registerkarte Anlagen.
Sichern Sie Ihre Eingaben.
Ergebnis
Sie haben eine Support-Meldung angelegt.+
Yesterday I search the internet for a note, but I didn't find one. So I'am happy now.
But now the next problem occurs. My next issue is about the SLD. The system cannot get the data from the satellites. I'am not sure, but I think our SLD isn't perfectly configuried. Do you have an "How To" or something like that?
regards
marc

Solution Manager storing ECC's ST03n data - is this possible?

Similar Messages

Maybe you are looking for