Solution manager system Landscape setup problems
Dear Expert,
I tried to add new system DEV into solution manager landscape with the Assistant .
But during the step Create RFC connections, it occured some errors below.
RC=2: The user has no authorization in the target system (for the object S_RFCACL), or logged on with one of the protected users 'DDIC' or 'SAP*'.
I created a account call 'TIM' at target system, and also solution manager has the same user account as well.
does any other authorizqtion need to be assign to TIM.??
please help~
Regards
Jack Lee
Hello,
Please create a communication user in both Solman system as well as satellite system with trusted autorizatrion.
For trusted autorization create a role with object S_RFC & S_RFCACL
While generating RFC please select the user which you have created in the above step
Hope this helps you if not let me know the exact error
Regards,
Raghu.
Similar Messages
-
Solution Manager systems RAM requirements - problems with the Java Engine
Hello,
I am about to install SAP Solution Manager 7 on a WIndows 2003 Server x64 but I need to know what the RAM requirements are? I have been having problems with the Java Engine starting and it seems to time out, I have heard that this is a very RAM hungry process and it might be why?
Many thanks for your help in advance,
OmarHello Omar,
To size SAP Solution Manager 7.0 EHP1 we recommend to use the SAP Solution Manager Quicksizer Tool at:
http://service.sap.com/sizing-solman
Here you find information on how to use the tool, how to collect input data for E2E Scenario Sizing, on SAP E2E RCA Sizing, Introscope Tuning, Wily Enterprise Manager Cluster Setup for E2E RCA Scenario and BI Aggregation Strategy in E2E Scenario.
Please find more information about installing Solution Manager in:
http://service.sap.com/instguides -> SAP Solution Manager
I hope this information helps.
Thanks,
Mark -
Solution manager system landscape(SMSY) configuraion
Can any one help me how to add the r3servers in solution manager landscape.Also plz tell me the Logical component creation is needed for this one.
Hi Vikas,
The following location has the SAP tutor file for System Creation.
https://websmp207.sap-ag.de/~sapidb/011000358700000894082006E.sim
The followinglocation has logical component creation steps as a tutor file.
https://websmp207.sap-ag.de/~sapidb/011000358700004860082004E.sim
Please check for any further details at Service market place in soltion manager space.
This should solve your issues in SMSY. Also let us know in case of any specific issues.
Br,
Sri
(Your Points drive us)
Message was edited by: Sri Raghu Kishore Pusapati -
Solution manager : system monitoring setup
Hi all,
We are planning to move from a third party monitoring tool to SAP solution manager we are Solman 7.0 with ehp1 .
I am going thru docs for system monitoring and follow the steps to active the systems and observed Instance availability step , is it possibule to automate an email when the satelite system is unavailable?
How do we automate an email for each alert from system monitoring ?
Please suggest..
Thanks,
Subhash.GHello Subhash,
Check this guide for alert configuration .
Solution Manager CEN and Alerting configuration guide for Dummies
Hope it helps.
Regards,
Amit Barnawal -
Managed system diagnostics setup problem
Hi
I am trying to configure managed system setup for NW 7.2 ce java system. I passed check prereq and manual configuration.
However I got stuck at phase "configure diagnotsics". I am getting the "None of the instances making-up this system was selected for setupPlease select at least one instance" message. The managed products : SAP NETWEAVER AS JAVA 7.2 and the product instance :Application Server Java.
the smsy configuration is configured to transfer data from solman sld.
Do you have any idea of Why this message appears? which part should I check?
Thanks....
Edited by: Turgay SAMDANLI on Apr 4, 2011 10:08 AM
Edited by: Turgay SAMDANLI on Apr 4, 2011 10:09 AMHi Turgay,
Fisrtly, you should have Solman at least on SP23 in order to configure a CE 7.2 for diagnostics. Before this version the
CE 7.2 is not supported.
Also, check the relevant instances in SMSY definition for the Netweaver CE 7.2.
Kind Regards,
Allam Drebes -
1 Solution Manager System - Mulitple Companies.
Hi All,
Please provide some input/information regarding one Solution Manager system with multiple companies.
Situation:
We currently have one Solution Manager system(SMP) that belongs to a main company. Under this company there are 5 separate companies. Each company including the main company has multiple SAP systems with different landscapes. Main Company - ECC6 landscape, BI 7.0, Portal, XI and HR Landscape. All other companies have their unique systems/landscapes with their own support personnel.
Issues at hand:
How do we setup Solution Manager to run multiple companies? Do we setup different Solution Landscapes and add each company systems to their own landscapes. How does this effect Service Desk/Charm setup ?
We also want to implement Service Desk / Charm / EWA and all the other functionality that is available in Solution Manager. Is there any advise on this issue and what are the potential pitfalls.
Is it possible to be setup multiple clients and have each company work in its own client.
I would appreciate any advice and information that will assist us with making an informed decision on the best way to proceed with this. I have done research and cannot find any information pertaining to this type of scenario. I'm hoping there are other customers that have a similar problem/issue.
Thanks and regards,
RickyDear Ricky,
You are right. You sould create multiple solutions u2013 a solution for each company. Each solution comprises the landscape (systems) relevant.
I don't think setting up multiple clients and have each company work on its own client is a good idea. The solution manager supports monitoring and managing multipal solutions. By creating multiple clients you are loosing the advantage of one-point-of-entery. Besides, a lot of the customization in the SolMan is cross client.
Regarding the service desk:
You may create a sold-to-party business partner for each of the companies (transaction BP) and assign each sold-to-party only to the relevant system/iBase in transaction IB52. This will allow you to screen the messages in the service desk by a sold-to-party/company.
Regarding the EWA:
The EWA monitors the systems in the solutions. You may have as many solutions as you want.
Regarding the Charm:
Sorry, we didnu2019t implement it yetu2026 you should keep asking abour that.
If you would want to use Business Process Monitoring - this is solution based, so I don't see any problem there.
Hope it was helpful.
Good luck!
Adi Skutelsky -
Solution manager system log - strange entries
Hi Everyone,
the problem we are facing in Solution Manager system log every five minutes appears a new error message:
2 Database error -30082 at CON
0 > SQL30082N Security processing failed with reason "24"
0 > ("USERNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
First of all the landscape: ECC, BI, CRM, PI and Solman. Each system is DEV, QUA, PRD - except Solution Manager.
Result of going to see the logs within work directory:
Connect to %_DCR_XXXXX as db2dcr with DB6_DB_NAME=DCR;DB6_DB_HOST=xxxxxx;DB6_DB_SCHEMA=SAPSR3;DB6_DB_SVCENAME=5912
C *** ERROR in DB6Connect[dbdb6.c, 1727] CON = 1 (BEGIN)
C &+*** DbSlConnectDB6( SQLDriverConnect ): [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USE
C &+*** RNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
C &+***
C &+***
C &+*** ABAP location info 'CL_SQL_CONNECTION=============CP', 337
C &+***
C *** ERROR in DB6Connect[dbdb6.c, 1727] (END)
C *** ERROR => DbSlConnect to 'DCR' as 'db2dcr' failed
[dbdb6.c 1732]
Some of the systems are being connected successfully and the error messages in SM21 are not related to those systems. But some of the systems like DCR cannot be reached. And this fact causing the error messages.
I haven't configured Solution Manager because I have joined the project later. I would like to know what job is trying to access the satellite system and for what purpose.
On solution manager side I have checked all the scheduled background jobs - all of them have been executed successfully.
There some of them are scheduled but it is hard understand what is purpose of the job.
I have checked and corrected system landscape through SMSY and have maintained all the RFCs. They all OK now.
What else could force to make a connection to satellite system? And where is the place where it is hardcoded local(satellite) db2 connection entry?
Like I said before, some of the systems are being connected but some not. The one which has not been connected - there was recently changed SAP master password. I believe this is the key to resolve the problem. But the system itself operating 100% correctly.
Perhaps it could be CCMS that makes some extra connections to collect the data from the monitored systems. But I have checked all the RFC's in SM59 and they were OK.
Any ideas or suggestions would be appreciated.
Thanks in advance,
Kind regards,
Artjom.Kaustubh Krishna,
thank you for respond.
It was dbacockpit. The connection was maintained with old db2sid password. And it was causing problematic log entries.
Problem was solved.
Points awarded.
Thanks,
kind regards,
Artyom -
Background job canceled in Solution Manager system
Dear all expert ,
Two background jobs canceled in solution manager system before some time.
details-
Background jobs :
1 - LANDSCAPE FETCH
Program name : RSGET_SMSY
Job log : Job started
Step 001 started (program RSGET_SMSY, variant ,
The SLD server connection is inactive
Job cancelled after system exception ERROR_MESSAGE
2 - SEND_SYSTEM_RELATIONSHIP_TO_SUP
Program name : AI_SC_SEND_SYSTEM_RELATIONSHIP
Job log :
Job started
Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant ,
SOL determined as monitoring Solution Manager system
SAP customer number unknown for installation number 0020606335
Job cancelled after system exception ERROR_MESSAGE
please help me , what should i do ?
I am waiting for your positive response.
Regards
Shubhhi,
You can try following ....
For the job SEND_SYSTEM_RELATIONSHIP_TO_SUP
Program : AI_SC_SEND_SYSTEM_RELATIONSHIP
1. Up to Support Package 09:
a) Start transaction SMSY.
b) Choose Shft+F5.
c) Select the system named in the message.
d) Choose F6.
e) Select the "System Data in SAP Support Portal" tab.
f) Using the input help, fill the system number field with the correct system.
g) Save the data.
2. Up to and including Support Package 08:
a) Start transaction SOLMAN_CONNECT.
b) Select the system in question in the ID field and choose the filter pushbutton.
c) Select the system and select "Create configuration".
d) Fill the system number field using the input help with the correct system.
e) For example, select the "BW GUI Connection" service type.
f) Carry out all of the subsequent steps of the Configuration Assistant until you see the "Finish" pushbutton.
This establishes a unique relationship between your system in the Solution Manager and the system number in the SAP Support Portal. Problems no longer occur with this system when the SEND_SYSTEM_RELATIONSHIP_TO_SUPP job is next run. However, the problem may still exist for other systems (in these cases, you should follow the same steps).
Hope this will help to solve your issue..
Regards
Bhuban
RKFL -
Hi,
I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
Thanks in advance
AshishHi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish -
Solution Manager: System Administration
Hello all,
in Solution Manager -> dswp -> Operations Setup -> System Administration I've successfully created and monitored some servers; the problem is that I've accessed a server and in Session Components hit 'Complete'; since then, I can't remotly monitor that server and the only option I have is to 'Display session'. How can I activate system monitoring on that server again?
Kind regards,
Tudor SofronHi Tutor,
there is a possibility, but it's not documented for customers.
Please open a customer message on SV-SMG-OP, open the R/3 connection and provide a user to logon
You can mention my name, I could help the Suppport Consultant in the Global Support Center.
Best regards,
Ruediger Stoecker -
Define Service Desk Destination in the Solution Manager System (Dump creen)
hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors SAPSQL_EMPTY_TABNAME
Except. CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time 13.07.2008 14:05:57
Short text
A dynamically specified FROM clause has an unexpected format.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSHI2" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
caught in
procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The running ABAP program attempted to execute an Open SQL statement in
which a FROM clause was specified dynamically in the field "TABLE_NAME". In
this
FROM clause, either a table name after a join operator is missing, or an
alias name after the key name "AS". The field "TABLE_NAME" could be empty as
well.
regardsHi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks. -
Support message not getting reflected in Solution manager system
Hi,
In satellite system support message is getting created, message number"...." successfully created in service desk.
When i check in solution manager system in crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
What can be the possible problem.
Thanks & Regards,
Balaji.SHi Gurus,
Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
Thanks & Regards,
Balaji.S -
EWA: error message in CRM check for SAP Solution Manager system
Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name Status Date of first entry Entries
CSABUPA0000000070 READY 03.12.2007 45
CSABUPA0000000934 READY 07.05.2008 45
CSAIBASE0000000000 READY 23.11.2007 36
CSA_ORDER_8000000000 READY 22.11.2007 5
CSA_ORDER_8000000001 READY 22.11.2007 3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AMHi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH -
Solution Manager Alerts Email setup
Hi,
I would like to know step by step process for setting up email feature in Solution Manager system for various alerts. Please tell me step by step at high level or any document / OSS notes.
Regards
SrinivasSjoerd Lubbers ,
Thanks for your input. I am trying to register CCMS agent (SAPCCM4X) for one of Satellite system (ABAP).
But I have few doubts while input the following information.
Client level should be 000 ?
If I input any typo or invalid input shall I go back and redo?
client [000] :
user :
language [EN] :
hostname of E02 message server :
use Load Balancing [n]/y ? :
hostname of application server :
system number (00 - 98) [00] :
[optional] route string :
trace level [0] :
please enter password for [E02:000:<USER>]:
Basically this system is ABAP system and I thought I need to register only SAPCCM4X agent. But after register SAPCCM4X the following message displayed. Shall I need to register this one? If it is I am having an issue with password.
This CCMS agent program sapccm4x is able to actively report
alert data into the monitoring system [SID].
To enable this feature, you have to setup the user CSMREG
in [E02]. (refer to SAP Online-help, search for 'CSMREG').
Alternatively use any user in [E02] that has at least authorization ).
to call per RFC function groups
SALC, SALF, SALH, SALS, SAL_CACHE_RECEIVE, SCSMBK_DATA_OUT,
SCSMBK_RECONCILE, SCSM_CEN_TOOL_MAIN, SYST, RFC1
After entering the RFC logon info for the user, the password
will be stored here on this machine in a Secure Storage.
client [000] :
user [CSMREG] :
language [EN] :
hostname of <SID> message server [] :
use Load Balancing n/[y] ? : n
hostname of application server [] :
system number (00 - 98) [00] :
[optional] route string :
trace level [0] :
please enter password for [SID:000:CSMREG]:
Regards
Srinivas -
Error in RFC & to Solution Manager System
Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinderFYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul
Maybe you are looking for
-
How do I sync iPhone to a new computer and not lose all contacts on the phone. The old computer does not work and I Can't sync with it.
-
How to open several psdfiles simultaniously in Camera Raw 8.1
I've replaced my Ps 5.5 by Ps 6. Now I'm having problems with opening psd files in Camera Raw; in Ps 5 I worked from Bridge and could open that type of files from Bridge to ACR. I just found out how to open it in Photoshop: open as....RAW file. But I
-
IDOC_AAE in integrated configuration and condition based routing RCVPRN
Hi, we send IDOC's from an ERP system to our PI 7.3 system. The IDOC_AAE adapter is configurated inside an integrated configuration. The routing should base on the RCVPRN context field. But in that case the sending process exits in SM58 of the sender
-
Chip in the edge of my iPhone 5 screen?
So I was inspecting my new (out of the box) iPhone 5 today and I noticed a VERY tiny little chip in the lower left-hand edge of the screen (SEE PICTURE BELOW). It's so tiny that I had to REALLY look to see it. While it is kind of annoying that my $20
-
Print queue stops automatically
when trying to print a document (from whichever program I've tried), the document appears to be sent to my printer (Lexmark Optra R plus), but then the print queue automatically stops. After I start the the print queue again, the printer works for so