Solution manager system landscape(SMSY) configuraion

Can any one help me how to add the r3servers in solution manager landscape.Also plz tell me the Logical component creation is needed for this one.

Hi Vikas,
The following location has the SAP tutor file for System Creation.
https://websmp207.sap-ag.de/~sapidb/011000358700000894082006E.sim
The followinglocation has logical component creation steps as a tutor file.
https://websmp207.sap-ag.de/~sapidb/011000358700004860082004E.sim
Please check for any further details at Service market place in soltion manager space.
This should solve your issues in SMSY. Also let us know in case of any specific issues.
Br,
Sri
(Your Points drive us)
Message was edited by: Sri Raghu Kishore Pusapati

Similar Messages

Solution manager system Landscape setup problems

Dear Expert,
I tried to add new system DEV into solution manager landscape with the Assistant .
But during the step Create RFC connections, it occured some errors below.
RC=2: The user has no authorization in the target system (for the object S_RFCACL), or logged on with one of the protected users 'DDIC' or 'SAP*'.
I created a account call 'TIM' at target system, and also solution manager has the same user account as well.
does any other authorizqtion need to be assign to TIM.??
please help~
Regards
Jack Lee

Hello,
Please create a communication user in both Solman system as well as satellite system with trusted autorizatrion.
For trusted autorization create a role with object S_RFC & S_RFCACL
While generating RFC please select the user which you have created in the above step
Hope this helps you if not let me know the exact error
Regards,
Raghu.

Solution manager system log - strange entries

Hi Everyone,
the problem we are facing in Solution Manager system log every five minutes appears a new error message:
2 Database error -30082 at CON
0 > SQL30082N Security processing failed with reason "24"
0 > ("USERNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
First of all the landscape: ECC, BI, CRM, PI and Solman. Each system is DEV, QUA, PRD - except Solution Manager.
Result of going to see the logs within work directory:
Connect to %_DCR_XXXXX as db2dcr with DB6_DB_NAME=DCR;DB6_DB_HOST=xxxxxx;DB6_DB_SCHEMA=SAPSR3;DB6_DB_SVCENAME=5912
C *** ERROR in DB6Connect[dbdb6.c, 1727] CON = 1 (BEGIN)
C &+***      DbSlConnectDB6( SQLDriverConnect ): [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USE
C &+***      RNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
C &+***
C &+***
C &+***      ABAP location info 'CL_SQL_CONNECTION=============CP', 337
C &+***
C *** ERROR in DB6Connect[dbdb6.c, 1727] (END)
C *** ERROR => DbSlConnect to 'DCR' as 'db2dcr' failed
[dbdb6.c      1732]
Some of the systems are being connected successfully and the error messages in SM21 are not related to those systems. But some of the systems like DCR cannot be reached. And this fact causing the error messages.
I haven't configured Solution Manager because I have joined the project later. I would like to know what job is trying to access the satellite system and for what purpose.
On solution manager side I have checked all the scheduled background jobs - all of them have been executed successfully.
There some of them are scheduled but it is hard understand what is purpose of the job.
I have checked and corrected system landscape through SMSY and have maintained all the RFCs. They all OK now.
What else could force to make a connection to satellite system? And where is the place where it is hardcoded local(satellite) db2 connection entry?
Like I said before, some of the systems are being connected but some not. The one which has not been connected - there was recently changed SAP master password. I believe this is the key to resolve the problem. But the system itself operating 100% correctly.
Perhaps it could be CCMS that makes some extra connections to collect the data from the monitored systems. But I have checked all the RFC's in SM59 and they were OK.
Any ideas or suggestions would be appreciated.
Thanks in advance,
Kind regards,
Artjom.

Kaustubh Krishna,
thank you for respond.
It was dbacockpit. The connection was maintained with old db2sid password. And it was causing problematic log entries.
Problem was solved.
Points awarded.
Thanks,
kind regards,
Artyom

Background job canceled in Solution Manager system

Dear all expert ,
Two background jobs canceled in solution manager system before some time.
details-
Background jobs :
                    1 - LANDSCAPE FETCH
    Program name : RSGET_SMSY
Job log : Job started
Step 001 started (program RSGET_SMSY, variant ,
The SLD server connection is inactive
Job cancelled after system exception ERROR_MESSAGE
                   2 - SEND_SYSTEM_RELATIONSHIP_TO_SUP
    Program name : AI_SC_SEND_SYSTEM_RELATIONSHIP
Job log :
                   Job started
Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant ,
SOL determined as monitoring Solution Manager system
SAP customer number unknown for installation number 0020606335
Job cancelled after system exception ERROR_MESSAGE
please help me , what should i do ?
I am waiting for your positive response.
Regards
Shubh

hi,
You can try following ....
For the job SEND_SYSTEM_RELATIONSHIP_TO_SUP
Program : AI_SC_SEND_SYSTEM_RELATIONSHIP
1. Up to Support Package 09:
a) Start transaction SMSY.
b) Choose Shft+F5.
c) Select the system named in the message.
d) Choose F6.
e) Select the "System Data in SAP Support Portal" tab.
f) Using the input help, fill the system number field with the correct system.
g) Save the data.
2. Up to and including Support Package 08:
a) Start transaction SOLMAN_CONNECT.
b) Select the system in question in the ID field and choose the filter pushbutton.
c) Select the system and select "Create configuration".
d) Fill the system number field using the input help with the correct system.
e) For example, select the "BW GUI Connection" service type.
f) Carry out all of the subsequent steps of the Configuration Assistant until you see the "Finish" pushbutton.
This establishes a unique relationship between your system in the Solution Manager and the system number in the SAP Support Portal. Problems no longer occur with this system when the SEND_SYSTEM_RELATIONSHIP_TO_SUPP job is next run. However, the problem may still exist for other systems (in these cases, you should follow the same steps).
Hope this will help to solve your issue..
Regards
Bhuban
RKFL

How to add Business Objects to system landscape smsy?

Hi there,
at the moment I configure the system landscape (smsy) in our solution manager. We have also BO XI 3.1 installations and I like to add them to the landscape. In transaction smsy I'm going to "Landscape components" -> "Product System" -> "Create New Product System" .. But now I'm not sure about the product and the product version.
Any idea?
Thanks and have a nice weekend,
Max

Hello,
You may want to review SAP Note 1507629 Preparing a BOE system for Service Sessions in Sol. Manager
There are two PDF files EGI_SBOP_EWA_Part1.pdf and EGI_SBOP_EWA_Part2.pdf attached.
They show how to define the system in SMSY.
Additionally you will need Note 1357901 CA: Managed System Setup for SAP BusinessObjects Enterprise
Because this is how the data will be collected.
And lastly once you have setup the managed system and setup the entries in SMSY, you then can create an EWA.
Hope this helps you out.
Regards,
Paul

1 Solution Manager System - Mulitple Companies.

Hi All,
Please provide some input/information regarding one Solution Manager system with multiple companies.
Situation:
We currently have one Solution Manager system(SMP) that belongs to a main company. Under this company there are 5 separate companies. Each company including the main company has multiple SAP systems with different landscapes. Main Company - ECC6 landscape, BI 7.0, Portal, XI and HR Landscape. All other companies have their unique systems/landscapes with their own support personnel.
Issues at hand:
How do we setup Solution Manager to run multiple companies? Do we setup different Solution Landscapes and add each company systems to their own landscapes. How does this effect Service Desk/Charm setup ?
We also want to implement Service Desk / Charm / EWA and all the other functionality that is available in Solution Manager. Is there any advise on this issue and what are the potential pitfalls.
Is it possible to be setup multiple clients and have each company work in its own client.
I would appreciate any advice and information that will assist us with making an informed decision on the best way to proceed with this. I have done research and cannot find any information pertaining to this type of scenario. I'm hoping there are other customers that have a similar problem/issue.
Thanks and regards,
Ricky

Dear Ricky,
You are right. You sould create multiple solutions u2013 a solution for each company. Each solution comprises the landscape (systems) relevant.
I don't think setting up multiple clients and have each company work on its own client is a good idea. The solution manager supports monitoring and managing multipal solutions. By creating multiple clients you are loosing the advantage of one-point-of-entery. Besides, a lot of the customization in the SolMan is cross client.
Regarding the service desk:
You may create a sold-to-party business partner for each of the companies (transaction BP) and assign each sold-to-party only to the relevant system/iBase in transaction IB52. This will allow you to screen the messages in the service desk by a sold-to-party/company.
Regarding the EWA:
The EWA monitors the systems in the solutions. You may have as many solutions as you want.
Regarding the Charm:
Sorry, we didnu2019t implement it yetu2026 you should keep asking abour that.
If you would want to use Business Process Monitoring - this is solution based, so I don't see any problem there.
Hope it was helpful.
Good luck!
Adi Skutelsky

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Error in RFC SM_DM1CLNT800_BACK to Solution Manager System Message no. STMWFLOW025

Hi,
I am facing an issue in our Test landscape. One of our team member uninstalled solman system which was connected to all other system. CHarms was partly configured in it, so other technical team used to reach to solman for creating TR# and also release the TR from Solman. Now that the system was removed abruptly we are facing this issue and I have checked few things as below:
1) Checked for domain link entries in STMS and TP profile file, could not find anything. Nor there is any option to delete domain link as there is for create
2) Checked the RFC its was working as new Solman with the same host name and other details has been brought back with out any settings yet in it.
3) I deleted the RFC SM_DM1CLNT800_BACK in the managed system and had a backup copy created before deleting it. But still get the error "Error in RFC SM_DM1CLNT800_BACK to Solution Manager System" in more help I see this Message no. STMWFLOW025
4) Message no. STMWFLOW025 - It gives me an indication that this is something to do with the domain link and the Workflow of the TMS.
5) Checked BCOS_CUST table and it has an entry for this RFC. - Should I be removing this entry and will this resolve the issue?
I need help in resolving this issue and also if one of you could share a blog for the proper configuration removal process of a managed system from Charms and ITSM I think it would be very helpful. I could only find process and step towards configuration and not how to unconfigure the system.
Thanks in advance
Ashish

Hi
The issue is now resolved, this is how I did it.
1) Removed entries from BCOS_CUST from client 000 for OSS_MSG which was pointing to the RFC name
Then got another error:
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
2a) Ran the report in SA38 TMW_CONTROL_PROJECT_LOCK with selection for Deactivate the "project lock functionality".
2) Filled the "Deactivate Project Lock" field with "X" then clicked EXECUTE.
Problem got Solved.
Thanks
Ashish

Master Data synchronisation between two Solution Manager systems

Hi all,
does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
Thanks!
Regards

I asked a likewise question on the OSS earlier and I was told
"Use MDM" (which is a separate product and must be licensed separately).
Markus

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Support message not getting reflected in Solution manager system

Hi,
In satellite system support message is getting created, message number"...." successfully created in service desk.
When i check in solution manager system in crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
What can be the possible problem.
Thanks & Regards,
Balaji.S

Hi Gurus,
Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
Thanks & Regards,
Balaji.S

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

Automatic creation of business partners in Solution Manager system in Charm

When I automatically create business partners in the Solution Manager system from the users in the satellite systems, they are created of type "Business Partner (Gen)" and they are not associated to the user with the same name id in the Solution Manager system, but they are connected to the remote users in the satellite systems. For this reason I change manually every business partner making it of type "employee" and connecting it to the user in the Solution Manager system. In this way I can use it like partner function. Is this the correct procedure to follow? If not, what do I have to do? Which is the correct way to generate business partners in the Solution Manager system from the users in the satellite systems?
Thanks
Antonello

Hi,
It is advisable to have the same login name for the satellite systems and SOLMAN user.
Business partner can be created thru tcode DSWP -> Select Solution -> Edit -> Create business partner.
You need to create a business partner only once by the above method, even if you have a number of satellite systems.
Once the BP is created , go to tcode BP -> select the business partner -- > In the Identification Tab, enter the systems which will be accessed by the user. Here you can also give the SLM system ID in addition to the other satellite systems.
The employee connection process which you do is correct
Rgds
Abhijit

How to get the ASAP 7.0 Implementation roadmap in Solution manager system?

Hi,
We are on SOLMAN 7.0 SP19 and we wanted to use the ASAP 7.0 roadmap for an implementation project. But currently we dont see this roadmap in the list of Roadmaps available. Can some one tell how it can be brought in and made available in Solution manager system. Is it done through a SAP note? If not where do we can get this roadmap? I know the HTML version is available in service matketplace but we want the roadmap to be assigned in Solution manager project.
Regards,
Kathir

Hi Lori,
Thanks for your reply. Do you have information on what support pack level of ST-ICO will have the Roadmap ASAP 7.0?
The currentl level of my system is ST-ICO 150_700 0018.
Regards,
Kathir

Solution manager system landscape(SMSY) configuraion

Similar Messages

Maybe you are looking for