Solution Manager Tab Name Change - is it possible

Hi
I am new to Slolution manager config. and would like to know if I can change the Tab name of the Solution manager where you have Tabls like Gen.Documentation, Proj. Documentation, Administartion etc.
If we can change the names, then please let me know the cofig. steps.
Thanks,
Atul

Hi Valdecir
Thanks for the quick response.
We are ready to maintain it but could you please let me know the proess / config to change the tab name.
Thanks,
Atul.
Hi Atul,
It is a matter of translation. As it is standard text if you change them, you will need to maintain the change log as they can revert on the next suppor package or upgrade.
Regards,
Valdecir

Similar Messages

  • Test Package in Test Management tab of Change Document

    Hi Expert,
    When we test on CHARM, we realized that the test package in test management tab can only be
    attach before the developer change the status to "Pass normal change to
    test". Is this standard or can we do any configuration to allow the
    test package be attach during "Test for Preliminary Input" status?
    Thanks
    Best Regards
    Remy

    Hi,
    I manage to solve this issue as below,
    Go to SPRO
    >SAP Solution Manager Implementation Guide
    >SAP Solution Manager
    >Capabilities (Optional)
    >Change Control Management
    >Standard Configuration
    >Change Request Management Framework
    >Adjust UI objects by User Status
    Thanks
    Best Regards
    Remy

  • Solution Manager Tab Maintenance

    Hi SDN'ers,
    Could anyone tell me whether it is possible to add additional tabs to the Solution Manager Configuration view, apart from the standard tabs, Documentation, Testing, etc.
    Any ideas would be appreciated.
    I am able to show/hide these default tabs, but I need to add some extra tabs.
    Regards.
    FB.

    Hi all,
    Thanks for the information.
    When looking at the blog: /people/issacnolis.ohasi/blog/2008/01/04/upgrade-sessions-whats-sap-solution-manager-maitenance-optimizer
    It mentions that one would need to go to :
    SPRO -> SAP Reference IMG -> SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solutin Manager System
    Under this are several items:
    -> General Settings
    -> HTTP Services
    -> Connection to SAP
    etc.
    Where is the documentation to work with these items? My thoughts are that these need to be done before starting to configure the Maintenance Optimizer.
    After the installation, ran the post-installation steps and all seemed to go well. The list of these items were not there (as part of the post-installation steps).
    TIA

  • Tab Name Change

    Hi,
    How to change the tab name of a tabstrip in transaction <b>'crmd_order'</b>.
    Regards,
    Suraj.

    Hi ,
    First check the program name . Go to Se51 and select the program name , select screen number 0014(for me23n) and layout editor radio button then go to display ...from there u can change the description .
    Thanks
    Dipak

  • Tab name change in Puchase Order

    Hi,
    We have added some fields to Purchase Order Customer Sub screen. This added a new tab called "Customer Data" to the transaction. Now I want to change this tab name to something else. Please let me know how can I do that.
    There is a similar thread where it was solved but no information on how to do that.
    Re: How to change  "Customer Data" tab name to some other text in PR(ME52N)?
    Thanks

    Hi
    If you are using the BADI 'ME_GUI_PO_CUST'. then in "IF_EX_ME_GUI_PO_CUST~SUBSCRIBE".
    Assign ls_subscriber-label = Tab Name.
    http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29
    If you are using the customer exit method then, goto SE38 and enter the program name SAPLXM06 (This can be modified for certain change) and select the logon language changes
    goto Text elements, enter 101 as text id and enter the details,
    and also enter text id 111, and enter the same details
    Save and Activate.
    Note : If you maintain the original language and maintain the text elements, then you will not get the changes in tab. So keep this in mind and change.
    I have maintained like this in my system
    101     Test
    111     Test
    To check whether the tab text is correct or not, set a break point in program LMEGUIU06 on line no 316 and check.
    Shiva

  • TAB name change in PO

    Hi,
    I want to change the tab name in a PO say for eg. the Additional data tab in the header data has to be changed to validity details.
    How to proceed?
    Regards,
    R. Dillibabu.

    Hi ,
    First check the program name . Go to Se51 and select the program name , select screen number 0014(for me23n) and layout editor radio button then go to display ...from there u can change the description .
    Thanks
    Dipak

  • MEREQ001 - Tab name change

    I am using exit 'MEREQ001' for adding a new tab in screen of transaction ME51n/ME52n/ME53n. In my requirement, the new tab should be named as additional data. I am not able to change the tab name, in default the name is displaying as customer tab. Please help me in this.

    Hi,
    you can change tab custom name "Customer data":
    go to the custom Dynpro 0111,
    in "text symbols" of MODULE status_0111 OUTPUT,
    you can insert: num.111 and text "Name tab custom".

  • Can Solution Manager do JAVA change management?

    We want to Solution manager 4.0 to control ABAP and JAVA change
    across the enterprise.
    The only question is that whether we can use Solution Manager to replace NWDI.
    Please advise, I'll give points. Thanks!

    Hi Sukhii,
    This new functionality is called CTS+ or OTO project and is comming in SP12 for Basis:
    This enhancement enables you to use the transport functions in Transport Organizer and Transport Management System to transport non-ABAP objects. This includes objects such as the following:
    - Objects from the SAP NetWeaver usage type EP (Enterprise Portal Archives, EPAs)
    - Objects from the SAP NetWeaver usage type PI (XI transport files, TPZs)
    - Objects from the SAP NetWeaver usage type DI (software component archives, SCAs; development component archives, SDAs)
    The objects are transported in transport requests (type Workbench Request) along the transport routes defined between systems in CTS. You can include non-ABAP objects in transport requests either in CTS (transaction SE09) or on a Web Dynpro UI.
    This enables you to manage transports between non-ABAP SAP systems in a central CTS.
    A function for creating non-ABAP systems in CTS has been added to the existing UIs. To deploy objects in non-ABAP systems, you require a NW Java Server as well as SAP NWAS ABAP.
    Effects on System Administration
    You can now administer transports in a central system by creating non-ABAP systems and defining appropriate transport routes.
    Effects on Customizing
    Any existing settings in CTS are preserved
    For the moment in the Solman system this functionality will be available in ST12 but still is not clear for which scenarios , probably for PI and EP.
    Best regards,
    Dolores

  • Batch name change in FCP, possible?

    Hey folks are there any plugins, apps, scripts out there than can facilitate batch renaming of clips in FCP rather than getting it done one file at a time? FYI using FCP 6. I've done some digging around and can find ways to batch rename on the finder level but that's not going to work for what I need to do.
    thanks! J

    i'd thought about that but will that break the connection in FCP with those media files? not at work so can't try right this moment. but if I use a script or program in the finder level to rename a whole bunch of clips, FCP will think the files are missing as they don't have the same name any more, right? At that point I'll need to relink each clip individually first before I can do the clip to match file method, right?
    or is there a way around that. either way I'll try this in the morning.
    thx. J

  • Solution Manager Change Management Master Guide

    Hi
    We are looking into implementing Solution Manager 7.0 and have the
    following questions:
    - Can we implement change managment in Solution Manager with only one
    satellite system (i.e. Development) as the other systems are not ready
    yet (i.e. Test, QA etc.)?
    - Could you let us know where we can find the master or technical guide
    to setup change management in Solution Manager 7.0.

    Hi,
    it is possible to implement ChaRM even not all satellite systems are available yet.
    I am not sure how much functionality you will get using virtual systems but you may configure and test ChaRM using 3 different clients in your DEV system (need to adjust TMS config accordingly).
    Some useful information regarding ChaRM configuration can be found [here|/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario]
    Since ChaRM relies on Service Desk you should also have a look at appropriate Blogs.
    Also you should follow the IMG documentation/steps in SPRO.
    Regards

  • Solution manager -Change Management

    Hi gurus,
    I have just completed the SOLMAN service desk configuration and need to explain to client on the above (Change management)  compnent of SOLMAN
    Can anyone elobrate what is this software component for and any reading material related to this. It will very helpfull if you can provide the guides to configure and the user guide
    Your help highly appreciated

    For Service Desk:
    http://service.sap.com/solutionmanager -> Solution Manager in Detail -> Service Desk
    For Change Request Management:
    http://service.sap.com/solutionmanager -> Solution Manager in Detail -> Change Request Management
    For configuration you may follow Reference IMG documentation
    Solution Manager -> Configuration -> Scenario Specific -> Change Management
    Webblogs can be found at: SAP Solution Manager
    Additional info can be found at http://rkt-solman
    /cheers

  • Need company name change in Skype Manager

    My current company name in Skype Manager is "Redmain Network". I want it rename to "Enmain Group". Please help me. [The Skype advice in Company details section of Skype Manager: Important: If you want to change your company's name you'll need to contact customer support to make the change. Contact Customer Support]

    Hi, Rameesh, and welcome to the Community,
    You will need to contact Skype Customer Service to arrange for a Skype Manager configuration name change.  Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    Skype is aware of continuing and sporadic problems with the website when contacting their customer service agents. If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
    Regards,
    Elaine 

  • Bridge name changes don't appear in Lightroom

    I changed a bunch of file names in Bidge using Batch rename.  The changes appear in bridge and Finder, but not Lightroom.  Is there a way to get Lightroom to see the new name?
    Thanks.
    John

    I think you'd have to import the photos again, after the name change (which could possibly cause you to lose any edits made in Lightroom, and possibly also lose metadata assigned in Lightroom).
    Lightroom is not a file browser. Therefore, as a general principle, once you import photos into Lightroom, you need to do all photo management inside of Lightroom and not using your operating system nor another program.

  • Code Inspector integration with Solution Manager

    Hi All,
    I would like to integrate the Code Inspector into Solution Manager, so that changes in managed systems can be checked prior to passing to test. I wonder if any of you is aware of such a solution, or have already implemented such functionality
    Thanks iin advance,
    Best regards,
    Ádá

    Hi
    please check the blog
    [/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector|/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector]
    and the discussion on the treads,
    [Is it possible to integrate the Code Inspector in Transport Management|Is it possible to integrate the Code Inspector in Transport Management]
    might be this helps
    Thanks,
    Jansi

  • A problem on Sap Solution Manager

    Hi all,
    I got a problem with Sap Solution manager and i hope that you will be able to help me…
    I’ll try to do my best to be understood in English =)
    So, here is my goal :
    I want to use SolMan as a workbench for test with eCATT. I made a very simple test with the transaction SECATT : A script for a customer creation by the transaction XD01.
    This script works well, so I’ve done the “test configuration”, the “Test data” and the “system data”.
    At this point, I don’t have any problem. If I launch the test, it works. (Important point maybe : I work in remote from an environnement dedicated to SolMan toward a production one).
    When I try to put this test in SolMan, there appear my problems.
    I don’t really know SolMan for the moment, but it seems that I have to begin  by the transaction “SOLAR01” which lead me to the “Business blueprint change”. But I can’t modify anything in it, as the system always tells me the following error : “You cannot change (or There are no) Structure nodes”.
    Maybe I’m not going in the good way, but I try every transaction in SolMan, like Configuration, Test plan management or project overview & Administration. I filled all field I could, but it’s not working for the moment.
    I just want to know how to get my test in a workbench, in a test plan on SolMan…
    Can you help me ?
    Thx a lot
    R.P.
    (P.S : Of course, if you got a step by step document, I would be pleased to receive it ! =))

    Hello Papillon,
    What I understand from your contribution: You do not seem to have a problem working with the Test Workbench in general but would like to know how to work with the Test Workbench as integral part of SAP Solution Manager.
    The basic idea of SAP Solution Manager is that you have the possibility of doing a process-oriented testing (instead of straight module or functioned-oriented testing with regular Test Workbench functionality).
    This is why in SAP Solution Manager you would start of with setting up a project (in transaction SOLAR_PROJECT_ADMIN), in which you define a <i>process-oriented</i> blueprint structure in the next step (transaction SOLAR01) and attach test cases to your process-oriented structure (in transaction SOLAR02) afterwards.
    You will find a guide dedicated to testing topics in SAP Solution Manager here:
    <a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000213552006E">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000213552006E</a>
    This guide should provide sufficient guidance and walks you through the whole process, explaining why and how you operate the above mentioned transactions and much more.
    Best regards,
    Doreen Baseler

Maybe you are looking for