Solution Manager Testing Procedure

hi everyone,
i have configured solution manager for HR Reporting with the following t.codes
solar_project_admin
solar01
stwb_2- where i am not able to find the test cases so i am not able to assign test packages to users and
in t.code stwb_work when i test the report id doesnot see anything
pl help me out
Regards
Utkarsh

Hello. You have to create them by using NEW button.
Bye

Similar Messages

Solution Manager Test Management Process

Hi,
I have been assigned for a solution manager task for test process,I have used for uploading and downloading the documents ,the transaction used solar01 and solar02.
The process includes right from for eg.FS ,TS till CR,in future if anyone access can see the complete tree of the CR(Change Request.
How to provide the link between if anyone access CR to see the entire tree.
I have given the requirements below.
Description: There is no standard framework for test management , specifically the application support domain. Presently, all test efforts (unit test, integration test, non-regression test, stress test, acceptance test) are managed and executed on project or change level, i.e subject to discretion and goodwill of the individual project manager / change owner. In order to strengthen both the test process and tool support, the global Solman is to be prepared for that. Proposed phased approach is:
a.       Familiarize and explore standard Solman functions and features for test management in global Solman (test client); hands-on tests to be started after completed IBM migration
b.      Setup sample test plan and cases, load sample content (test script). Select appropriate test use case independently and in close communication with local contact or project mgr.
c.       Document and showcase sample to SAP COE and representatives.
d.      Offer and decide on deployment options.
e.       Provide ongoing support and coaching; documentation; break-fix support as needed (expected: minimal)
Test automation and non-SAP test mgmt are not in scope .
Guide me,since the target date is fixed
Regards,
Anu

Hi,
As far as I know the only solution for this would be to split it in two test cases, so you can assign the two testers in sequence.
You can assign the same test case for multiple testers but you can't split half of it for each tester.
Kind regards,
Fabricius

Solution Manager-Test Plan Management_Issues

Dear Friends,
I am working on Solution Manager 4.0--Patch level:12
Highest support package level:SAPKITL422.
Before uploading the patch level 12, if i enter into t.code SOLAR01 / SOLAR02,
i can only raise support message by choosing the tab "Messages"
I CAN NOT raise an "Issue" at that time. (Before uploading patch level:12)
Now i have uploaded the patch to 12.
Now i can raise support message as well as an issue in both t.codes (SOLAR01/SOALR02).
My problem is:
Now i want to track an issue related to my integration testing/ UAT through solution manager.
If i enter into t.code STWB_WORK, i can only raise a support message. But i can not raise an "Issue" in STWB_WORK.
How to activate an "Issue" also in STWB_WORK?
Any other patch level has to be uploaded to activate?
regards
Senthil

By the way:
What's the difference between a Support Messages and an Issue?

Connection between Solution Manager Testing und Test Workbench

Hello,
I have Problems understanding the connection between the test organization in the solution manager and the test workbench in the corresponding sap system.
The documentation says that the Solution Manager reuses the test workbench functionality. It is not clear for me how this connection works. In the solution manager you define test cases in the configuration of the project. When you create a test plan in the solution manager you can use the testcases of the project. But when you execute the testcases you do it in the corresponding sap system where the transaction of the test case is. Does this mean that the test cases und test plans that you create in the solution manager are transported to the target sap system? If this is true, when is the transport taking place?
Thanks a lot!
Regards, Lars.

Hi Lars,
I think you are confused with solution manager and tools like QTP.
The difference between solution manager and QTP/ECATTT is the eCATT or QTP are used for creating the test scripts or the test cases but solution manager is used for storing all types scripts centrally.
It means say you have manual test scripts eCATT and Ext QTP scripts lying on the R/3 servers but from solution manager you can create a project comprises of all the scenario and linked test cases of various type.
Now at a later time when you start testing a manager login to solution manager enter the test plan project name etc and can check what is the current status of the test
1. how much testing is completed
2. Who is the tester what is the test script where or on which testing took place etc
you can check my weblog to knw how to manage and perform testing via solution manager.
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
Please reward points for the same.

Authorization check For Test plan in SAP Solution Manager test management

Hi experts,
I need to allow only selected user to view their test package and the list of transaction so i need to have a authorization check by using enhancement i got struck since i am not able to find any badi for this ..kindly looking back your suggestion

Hi Namrata,
Yes, you can create project structure before using solar01 tcode. later once your test cases (either manual or automatic) are ready then you can upload them using solar02 on test cases tab,
refer Link Test Case to Transactions/Reports - Configuration - SAP Library
Assignments - SAP Solution Manager - SAP Library
Thanks
Jansi

Test Package Sequences in Solution Manager Test Management

Hello,
Is it possible to have a sequence in a test package with only one test case but 2 or more testers?
I have individual test cases which will be tested by several testers e.g. tester1 completes first half, tester2 second half using results obtained from tester1. I do not want to split it into 2 separate test cases.
Is there any way of creating virtual copies of a test case in a test package so I can assign a sequence or any other possible solution?
Thank you.

Hi,
As far as I know the only solution for this would be to split it in two test cases, so you can assign the two testers in sequence.
You can assign the same test case for multiple testers but you can't split half of it for each tester.
Kind regards,
Fabricius

Storage of QTP scripts in Solution Manager

Hi,
I am using QTP to do automated testing. I am also using Solution Manager Test Work Bench for doing the test plan management. The QTP script that is created is uploaded to eCATT in standalone mode. I am able to run this QTP scripts from eCATT. But the problem that I am facing is in Solution Manager in the Business Process Tree when I go to the Test Case Tab and search for the test script I am not able to find it there.
Regards
Rejin

Hi Rejin,
You have to first create a Test Configuration for your test script. This you can do by going into your test script from TCODE "SECATT" and follow the menu path Utilities/Test Configuration/Create, this will create a Test Configuration with the same name as your script. Now you can goto to the Solution Manager business process and enter you Test Configuration in the Test Case Tab.
Regards,
Rajnikanth

User Manual for Solution Manager

Friends,
For a first time user of Solution Manager, is there documentation available to guide one through the rigour? Maybe a user manual on how to effectively harness Solution Manager during the project implementation cycle.
Thanks and Regards,
Sameer Aroskar

you can also check this
<a href="/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager and Perform Testing using Solution Manager</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06">How SAP Solution Manager Can Smooth Your Next Upgrade Project</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2a92c290-0201-0010-4b8f-a2aaaa3b822e">SAP Solution Manager - Test Drive SAP Solution Manager in an Implementation Project</a>
I hope these will be fine for now
Regards
Milton

Managing the development within solution manager landscape

Hi
We have a development system (SMD) and a production system (SMP). SMP is the domain controller and manages the change requests of R/3 DEV, QAS and PRD. Now we want to start deploying enhancements to the functionality in the solution manager itself. I created a maintenance project in SMP and activated the change request management. The maintenance cycle is generated showing SMD as the Development track and SMP as the production track. The status is changed to development with release along with the normal activating and unlocking of the tracks. A change request is created in SMP with the component as SMP system. When I try to create a transport request or try log onto the system, the system is raising different types of error messages. Ideally, it should have created transport requests in SMD and should have navigated there for us to perform the required configuration/development. The error messages are System SMD, client 110 not found when trying to log onto the system and when trying to create a new transport request, it raises the exception with below detailed description.
"A technical problem occurred when RFC function module /TMWFLOW/TASK_START was accessed
Message no. SOCM_ACTION_LOG 025
Diagnosis
An exception was triggered when an RFC module was called.
The module is /TMWFLOW/TASK_START
System Response
The system terminated processing. The transaction contains errors.
Procedure
Check RFC connection NONE to the Solution Manager.
Procedure for System Administration
To analyze the termination, you can activate the assertions in the socm_rfc checkpoint group.
Additional Information:
Exception CX_SOCM_RFC_SYSTEM_FAILURE occurred (program:
CL_CHM1_INSTANCE==============CP, include:
CL_CHM1_INSTANCE==============CM00C, line: 140).
There is no RFC destination in the specified target"
Our basis person is also unable to troubleshoot this. Any help will be appreciated. Thanks

Hi Srinivas,
1.Check on the RFCs in SMSY for the SMD and SMP.
2.In the SMSY logical component when you click on the transport route is it showing the proper Transport route as you intented?
3.In the transport route is it client specific?
Please checkon the above and revert back for any clarification.
Thanks and Regards,
Avinash.

Archiving/Deleting Test Messages in SAP Solution manager

Hi,
We have configured Service Desk in our solution manager 7.0 with EHP1 system.
We have created test messages to test the configuration.
We need to delete these test messages which are appearing in T Code CRM_DNO_MONITOR.
We run the report "CRM_ORDER_DELETE" but the output is
Deletion of CRM Documents
The following document could not be deleted:                 8000000259
Not possible to delete, a reference exists to a subsequent document
Number of documents deleted:                                          0
Number of documents not deleted:                                      1
So
We have followed the "Note 1329247 - Archiving Solution Manager Service Desk messages".
1)
a)Call transaction DNOTIFWL and set the deletion flag for the Service Desk message. The deletion flag corresponds to the system status I1076 (deletion flag).
b) Execute the report Z_DELETE_BASIC_NOTIFICATIONS
The above step we have executed successfully.
2)
In CRM
You cannot delete a service process in CRM. The service process must be archived.
Call transaction SARA and select the archiving object CRM_SERORD. Archiving involves three steps:
a) Initial run     Report CRM_ARC_SERORD_CHECK
b) Write run       Report CRM_ARC_SERORD_SAVE
c) Delete run     Report CRM_ARC_SERORD_DELETE
in SARA T Code we have typed archiving object CRM_SERORD.
After this what to do??? How to proceed further.
Can any body suggest us the step by step procedure to archive these test messages.
Regards,
Raj

> In CRM
> You cannot delete a service process in CRM. The service process must be archived.
> Call transaction SARA and select the archiving object CRM_SERORD. Archiving involves three steps:
> a) Initial run     Report CRM_ARC_SERORD_CHECK
> b) Write run       Report CRM_ARC_SERORD_SAVE
> c) Delete run     Report CRM_ARC_SERORD_DELETE
>
> in SARA T Code we have typed archiving object CRM_SERORD.
> After this what to do??? How to proceed further.
You need to schedule a BGD job to execute this. You can do this from the SARA screen itself, clicking on the 'Job' button. Please refer:
http://help.sap.com/saphelp_crm50/helpdata/en/e6/c66f3b6c980c3be10000000a11402f/content.htm
Rajeev

Error opening a Test Script inUFT from Solution Manager

This error is the subject of a call with SAP and HP but I wondered if anyone else has come across this problem.
We work with Solution Manager 7.1 (SP11) and HP's UFT 11.53 to create automated testing. We ustilise the two free seat licences for UFT that are provided via enterprise support. We do not use HP's Quality Centre.
On some occasions when trying to open a test script for editing UFT tries to open and then closes again. The error message below is displayed in solution manager.
“External Test Tool Quick Test Professional Is Busy and Cannot Create a New Test Script”
When this happens the local cache files are wiped. We have managed to salvage some of these scripts by pasting in copies of the cache file from another PC but some we had to recreate from scratch.

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

Solution Manager 7.0 Installation Error on Import ABAP -Test DB connection

Hi, SDN fellows.
I am installing Solution Manager 7.0. In Step 16 of 44 - Import ABAP, I encountered an error when the installer was testing the database connection. It failed at this command:
R3load.exe -testconnect
Below is the error I copied from the log viewer. Thanks for all possible advices/suggestions to fix this issue.
=================
WARNING 2011-07-12 03:51:49.188
Execution of the command "C:\usr\sap\SM1\SYS\exe\uc\NTAMD64\R3load.exe -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
C:\usr\sap\SM1\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110712035148
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 99
WARNING[E] 2011-07-12 03:51:49.188
CJS-30023 Process call 'C:\usr\sap\SM1\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2011-07-12 03:51:49.204
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
=============
KC

cont....
4 ETW000 33 1.576524
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 1112312
4 ETW000 24 1.576548
4 ETW000 [dev trc ,00000] DbSlRead - Error 103 (dbcode 208) on open 19 1.576567
4 ETW000 [dev trc ,00000] DbSlRead - <##Y4ISBDCAPPsm100000045960000000001234118>
4 ETW000 19 1.576586
4 ETW000 [dev trc ,00000] DbSlRead - Error 103 (dbcode 208) on fetch 13 1.576599
4 ETW000 [dev trc ,00000] DbSlRead - <##Y4ISBDCAPPsm100000045960000000001234118>
4 ETW000 18 1.576617
4 ETW000 [dblink ,01299] ***LOG BZA=>table SVERS does not exist on database [dblink#5 @ 1299]
4 ETW000 8060 1.584677
4 ETW000 [dev trc ,00000] Wed Jul 13 23:41:19 2011 41342 1.626019
4 ETW000 [dev trc ,00000] DbSlBegRead[1]: ##Y4ISBDCAPPsm100000045960000000002234118
4 ETW000 25 1.626044
4 ETW000 [dev trc ,00000] ParamStmtExec: line 13165. hr: 0x80040e14 Statement(s) could not be prepared.
4 ETW000 3649 1.629693
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
4 ETW000 33 1.629726
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000002234118]
4 ETW000 19 1.629745
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 208, sev 16), Invalid object name 'DDNTT'.
4 ETW000 27 1.629772
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000002234118]
4 ETW000 19 1.629791
4 ETW000 [dev trc ,00000] ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 COMPCNT FROM "DDNTT" ]
4 ETW000 28 1.629819
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
4 ETW000 20 1.629839
4 ETW000 [dev trc ,00000] NTAB: SELECT COMPCNT FROM DDNTT FAILED 277 1.630116
4 ETW000 [dev trc ,00000] DbSlBegRead[1]: ##Y4ISBDCAPPsm100000045960000000003234118
4 ETW000 44 1.630160
4 ETW000 [dev trc ,00000] ParamStmtExec: line 13165. hr: 0x80040e14 Statement(s) could not be prepared.
4 ETW000 459 1.630619
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
4 ETW000 33 1.630652
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000003234118]
4 ETW000 18 1.630670
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 208, sev 16), Invalid object name 'DDNTT'.
4 ETW000 29 1.630699
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000003234118]
4 ETW000 23 1.630722
4 ETW000 [dev trc ,00000] ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM "DDNTT" ]
4 ETW000 29 1.630751
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
4 ETW000 20 1.630771
4 ETW000 [dev trc ,00000] NTAB: SELECT VERSION FROM DDNTT FAILED 267 1.631038
4 ETW000 [dev trc ,00000] DbSlBegRead[1]: ##Y4ISBDCAPPsm100000045960000000004234118
4 ETW000 43 1.631081
4 ETW000 [dev trc ,00000] ParamStmtExec: line 13165. hr: 0x80040e14 Statement(s) could not be prepared.
4 ETW000 436 1.631517
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
4 ETW000 32 1.631549
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000004234118]
4 ETW000 18 1.631567
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 208, sev 16), Invalid object name 'DDNTT'.
4 ETW000 58 1.631625
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000004234118]
4 ETW000 19 1.631644
4 ETW000 [dev trc ,00000] ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 DBASE FROM "DDNTT" ]
4 ETW000 28 1.631672
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
4 ETW000 21 1.631693
4 ETW000 [dbntab.c ,00000] *** ERROR => NTAB: SELECT VERSION/DBASE FROM DDNTT FAILED
4 ETW000 284 1.631977
4 ETW000 [dbntab ,01276] ***LOG BZY=>unexpected return code 103 calling NTAB [dbntab#4 @ 12761]
4 ETW000 31 1.632008
4 ETW000 [twdydbacc.c ,00568] i:0 8690 1.640698
4 ETW000 [twdydbacc.c ,00569] db_fd_p.fname: PGMID 20 1.640718
4 ETW000 [twdydbacc.c ,00570] db_fd_p.is_key: 0 11 1.640729
4 ETW000 [twdydbacc.c ,00571] db_fd_p.offset: 0 10 1.640739
4 ETW000 [twdydbacc.c ,00572] db_fd_p.db_length: 0 10 1.640749
4 ETW000 [twdydbacc.c ,00573] db_fd_p.fixed_length:4 10 1.640759
4 ETW000 [dev trc ,00000] DbSlBegRead[1]: ##Y4ISBDCAPPsm100000045960000000005234118
4 ETW000 40 1.640799
4 ETW000 [dev trc ,00000] ParamStmtExec: line 13165. hr: 0x80040e14 Statement(s) could not be prepared.
4 ETW000 434 1.641233
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
4 ETW000 32 1.641265
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000005234118]
4 ETW000 75 1.641340
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 208, sev 16), Invalid object name 'XXXXT'.
4 ETW000 31 1.641371
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000005234118]
4 ETW000 18 1.641389
4 ETW000 [dev trc ,00000] ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 COMPCNT FROM "XXXXT" ]
4 ETW000 28 1.641417
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
4 ETW000 21 1.641438
4 ETW000 [dev trc ,00000] NTAB: SELECT COMPCNT FROM XXXXT FAILED 269 1.641707
4 ETW000 [dev trc ,00000] DbSlBegRead[1]: ##Y4ISBDCAPPsm100000045960000000006234118
4 ETW000 44 1.641751
4 ETW000 [dev trc ,00000] ParamStmtExec: line 13165. hr: 0x80040e14 Statement(s) could not be prepared.
4 ETW000 437 1.642188
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
4 ETW000 32 1.642220
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000006234118]
4 ETW000 18 1.642238
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 208, sev 16), Invalid object name 'XXXXT'.
4 ETW000 28 1.642266
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000006234118]
4 ETW000 19 1.642285
4 ETW000 [dev trc ,00000] ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM "XXXXT" ]
4 ETW000 27 1.642312
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
4 ETW000 70 1.642382
4 ETW000 [dev trc ,00000] NTAB: SELECT VERSION FROM XXXXT FAILED 273 1.642655
4 ETW000 [dev trc ,00000] DbSlBegRead[1]: ##Y4ISBDCAPPsm100000045960000000007234118
4 ETW000 44 1.642699
4 ETW000 [dev trc ,00000] ParamStmtExec: line 13165. hr: 0x80040e14 Statement(s) could not be prepared.
4 ETW000 435 1.643134
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
4 ETW000 32 1.643166
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000007234118]
4 ETW000 19 1.643185
4 ETW000 [dev trc ,00000] sloledb.cpp [ParamStmtExec,line 13165]: Error/Message: (err 208, sev 16), Invalid object name 'XXXXT'.
4 ETW000 28 1.643213
4 ETW000 [dev trc ,00000] Procname: [##Y4ISBDCAPPsm100000045960000000007234118]
4 ETW000 20 1.643233
4 ETW000 [dev trc ,00000] ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 DBASE FROM "XXXXT" ]
4 ETW000 30 1.643263
4 ETW000 [dev trc ,00000] Conn_i:1 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 1122000
4 ETW000 21 1.643284
4 ETW000 [dbntab.c ,00000] *** ERROR => NTAB: SELECT VERSION/DBASE FROM XXXXT FAILED
4 ETW000 324 1.643608
4 ETW000 [dbntab ,01276] ***LOG BZY=>unexpected return code 103 calling NTAB [dbntab#4 @ 12761]
4 ETW000 27 1.643635
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
4 ETW000 [dev trc ,00000] db_con_rollback (con_da={R/3,0,0},th_rollback=1,tx=0)
4 ETW000 9946 1.653581
4 ETW000 [dev trc ,00000] Rollback: TestConnection(1) successful 36526 1.690107

Can we create a workflow in Solution Manager for Tester Worklist ?

Hi Friends,
Actually I have a requirement to create a workflow in solution manager.
The requirement is to create a workflow for issue log(tester worklist). As soon as a new issue (support message) is created then the wf should get triggered and send out a mail to the resp. person. It just a sending a mail between issue creater and responsible person.
Can anyone please let me know if we create a wf in Solman or not ? If so please provide me some related buss. obj for that. thanks
Is there any standard workflow (or similar to that) to make it automatic ? Once the message is created then a mail to the responsible person should go.
Grateful to your help.
Srithan

Sorry Raguraman,
I am unable to check those tcodes as I havenot got the authorizations for those. after several mails I got some basic wf developer tcode access. I am not sure whether I have to create a new workflow for this or I can go with some built-in technology to send mail when a new message (tcode: stwb_work) is created.
can raguraman or anyone please help me on doing this ?
if the solman has provided the standard for sending mails when a new message is created/changed to the responsible person.
grateful for your help
Regards,
srithan

Solution manager 3.2 Test

Dear sap developers,
I am currently using ecatt to record business scenarios in different satellite systems from solution manager 3.2, and when I record MM , FI or PP transactions by using ECATT from solman in R/3 system a popup appears with "transaction not found in the target system" but when I try to record technical transaction it works., (RFC connection works in both sides, Solman and SAP R/3 4.6, authorization problems).
1st I choose the target system and I select the recorder type TCD, finally I enter the transaction, it works only for technical tcodes like su01, se80, also spro but not for mm01, va01 etc.
At the beginning of the recording when I try to display the whole transactions by using the match code the SAP menu contain only Solman menu not Logistics, Accounting of my target R/3 menu.
How can I record Logistic transactions in the target system from solman?
And in eCATT editor when I click the Pattern button I have only limited commands, how can I have the whole list of commands? The insert statement menu starts with command instead of Group.
Thank you very much for your help,
Aklilu

Hi Prakhar,
go there:
http://help.sap.com/saphelp_sm32/helpdata/en/index.htm
and click on Test Organization, there you are
Regards,
Pascal

Solution manager, PI and ERP incl FICA (IS-U) test systems on same HANA DB server Appliance

Hello
I wander is it possible to have Solution manager, PI and ERP incl FICA (IS-U). All for test/system purposes:
I am sure we need separate application servers for Solution manager, PI and ERP incl FICA (IS-U),
I would have question regarding Appliance i.e Hana DB server. can Solution manager, PI and ERP incl FICA (IS-U) products reside on same Appliance i.e Hana DB server in MCOS or MCOD? (I am sure that for production use this is no-go option)
What is the case when renting cloud solution?
Thank you a lot in advance
Jan

Check the java part, most of the Solman Web Based thing use the java, check the management console to ensure message server and dispatcher proper work, normally is: http://hostname:50113.
If central note give you problems deimplement all the not complete implemented notes and use SUM
and MOPZ to update your system with the last SP, then apply the central note acording to your SP level.
We found that have the system in the last level prevents a lot of problems because of not complete implemented notes.

Solution Manager Testing Procedure

Similar Messages

Maybe you are looking for