Solution Manager too Slow
Dear All,
We are running SAP Solution Manager 7.01 on Oracle 11g in AIX.
This central Solution Manager system is connected to more than 150 satellite systems.
The response of the system is too slow while we take transactions like solman_workcenter, RZ20 etc.
Is this because the system needs to fetch/collect infromation from all these 150 satellites before preseting the screen.
Solman is running with 10 CPU, 50 GB RAM and 82 GB swap.
The portal pages in the transactions takes more time to load.
Could you please help me to pin point the bottle neck in the system.
Regards,
Kiran
Hi,
Basically with 150 systems you may experience network capacity issue.
It does not matter if the system is the Solution Manager or any other SAP system. The analysis start from inspecting the overall time distribution by using the /nSTAD, then depending on the outcome check persistency, remote communication and locking with ST05 .
If in STAD there are huge wait times then definitely the network capacity should be inspected with OS-level monitoring tools, same for the CPU, memory and disk.
Regarding the java side views, it is very important to inspect the java side performance using the JDSR statistics in NetWeaver Web Administrator. There you would see the java side resource consumption to localize a potential memory consumption or CPU related issue. It is very important to clarify if the bottleneck is not the Garbage collection in java - if that is the case, the heap size parameters need to be tuned.
Best Regards,
Sylvia
Similar Messages
-
Release Management - too slow to run my scripts
I've setup Release Management 2013 Update 4 to use powershell scripts to do my deployments (I found limitations with both DSC and Agent releases so went down the powershell route).
Functionality wise it is all working exactly how I want it to and I am quite pleased, however the big issue I have is that it is very slow.
There are 5 separate scripts in my deployment (run DB scripts, deploy wep app, copy client MSI, copy service MSI, send email) and when I run these via PowerShell they run very fast - in a couple of seconds.
However, when running these from RM it takes about 5 minutes. It seems as if RM does the following:
Upload components
Say I'm going to do the Database scripts action
Wait 30 seconds
Run the database scripts (this is very quick - I log the output so I know this for a fact)
Wait 30 second
Say the database scripts have finished
Say I'm going to deploy the web app
Wait 30 seconds
Deploy the web app (this is also very quick - I also log the output so I also know this for a fact)
Wait 30 seconds
Say the web app is deployed
... and so on
Why are these 30 second pauses in there? It is making my release process slower than doing it manually!
(BTW - I have installed WMF4 on all servers, enabled PSRemoting, installed a certificate and set WinRM to run over https)
Any help will be appreciated.Hi Mark,
Thanks for your reply.
You added 5 Deploy Using PS/DSC actions in your release template to running that 5 separate scripts? RM need copy the component source package to component download folder in each Deploy Using PS/DSC action first, then run the script file which specified
in this action. So it will wait some seconds before script file be executed in each action. I test this scenario in my RM 2013 Update 4 release template, and received the same result.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Solution Manager Enterprise Edition upgrade slow
Hi
I am performing SOMAN 7.0 upgrade to Enterprise edition by upgrading kernel 701 and SP stack 18. I have already upgraded the kernel and java stack and now in the process of upgrading ABAP. I am expereincing really slow performance of this upgrade. I have checked tp and R3trans version which is uptodate as I updated kernel. I cant see any problem with CPU utilization as well swapping. I checked the SLOGs and there are no alerting errors. I see its moving and its very slow. I am just wondering if any of you guys experienced this - is this normal since this is a upgrade?Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST 400 0024 SAPKITL434 SAP Solution Manager Tool
ST-A/PI 01M_CRM570 0000 - Application Servicetools for CRM 500 - 7
ST-ETP 100 0000 - SAP Solution Manager Enterprise Edition
ST-ICO 150_700 0025 SAPK-1507PINSTPL SAP Solution Manager Implementation Cont
ST-LV 100 0001 SAPK-10001INSTLV SAP Landscape Verification Wizard
ST-SER 701_2010_1 0002 SAPKITLOS2 SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
a) In the case of ST-400 SP15-SP17
To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
b) In the case of ST-400 SP18 or higher
The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now -
Disk is too slow or System Overload. (-10010) The #SuddenMotionSensor - CAN I TURN THIS OFF sick of it popping up! any solutions? #logic9
i have an external firwire harddrive just for the audio projects which is 7200rpm etc and it has 500gb of free space on it!
i've already tried the pmset -a sms 0 thing, but that is only for laptops, their seems to be no solition for Mac Pro Desktops!
this is annoying.
hope someone can help.
Danand in laptops it is just working for the original builtin HD.
It shouldn't be there at all.
you set it off by (copy/paste):
sudo pmset -a sms 0 -
I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I upgraded to Safari 5.1 and now the problem is worse. Any solutions?
I can't stand peremptory affirmations like "Nothing is wrong with Safari".
Thousands of users can't be wrong (see the discussions).
If I read you the right way, it's never software' fault, it's the user who's the culprit.
Amazing!
In this very case, the fact is we can't give to "christinefromfonthill" a good solution because weren't sitting in front of her Mac.
You give her a good advice which could, perhaps, lead to an improvement.
But must also admit that Safari is a very slow browser compared to Firefox or Chrome.
And you can't ignore all the problems which arose when upgrading to Lion and were related to the new build and specs of Safari 5.1.
The best example is the apparition of "garbage type" (use of Last Resort font) when reading numerous sites. This never occured before and is the direct consequence of Safari compliance to Web Open Type. This standard prohibits the use of Type 1 Postscript Fonts and is the reason why so many people are in trouble.
I use a Mac for more than 25 years.
I am a very "clean" user who hates the bells and whistles of third party.
My Mac is always up-to-date and despite all my Mac loving care, I run into some problems.
Imagine the nightmare which can occurs for the vulgum pecus who isn't, by definition, a power user aware of all the requirements for running a System in optimal conditions.
May be Safari is one step in advance on its time but lambda users are paying the price for it. -
Hello all,
My Solution Manager system is very slow. I am running Solution Manager 7.01 (EHP1 SP04) on Solaris 10 with Oracle 11.2.0.1. It is running in a T2000 Solaris box with 32 GB of RAM. This box hosts two other PI 7.0 systems as well, that are not busy at all.
I do not have swapping in st02, all buffer hit ratios are over 99% and st04/st06 data look good as well
However, SMSY for example takes 4-5 seconds to run and many queries in workcenters (webdynpro for abap programs) take even more , 10-12 seconds
Is there any documentation on what to look for in a Solution Manager system? The usual tuning methods haven't worked for me
Also, how do you I tune the database? Do I put parameter values for OLTP or OLAP? I am asking because as part of the Solution Manager Diagnostics, I had to configure a BW client as well.
Many thanks
Andreas> My Solution Manager system is very slow. I am running Solution Manager 7.01 (EHP1 SP04) on Solaris 10 with Oracle 11.2.0.1. It is running in a T2000 Solaris box with 32 GB of RAM. This box hosts two other PI 7.0 systems as well, that are not busy at all.
>
The T-Server series is the worst choice for a SAP system. Those CPUs have lots of threads but this comes only into play when you have multithreaded applications (like Java). Since ABAP is single threaded and can't leverage the CPU power you will factually be even slower than a 5 year older classical SPARC v9 CPU.
This is a known "issue" and there's not really much you can do about it.
This was discussed before in the following threads:
Re: ECC6 - DEV & QAS Performance Very Slow
high CPU response times, altough low CPU utilization
Markus -
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
Java web start application runs too slow...
Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources. -
New iMac running 10.10.1 frequently pauses, way too slow
I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% avlogwriter
1% loginwindow
1% avguard-ondemand-mgmt
0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outsStart time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
Hitachi HDS722020ALA330
USB
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
hp LaserJet 3380 (Hewlett Packard)
Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
2014-12-19 DashlaneAgent crash
2014-12-21 QuickLookSatellite crash
2014-12-22 DashlaneAgent crash
2014-12-27 DashlaneAgent crash
2014-12-28 HelpViewer crash
2014-12-30 DashlaneAgent crash
2015-01-05 Microsoft Word hang
Log
Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
com.seagate.driver.PowSecDriverCore (5.2.6)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0188.79.83)
com.vmware.kext.vmx86 (0188.79.83)
com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
com.carbonite.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.apple.aelwriter
com.adobe.fpsaud
com.bombich.ccchelper
com.seagate.TBDecorator.plist
com.bombich.ccc
Agents
com.sony.PMBPortable.AutoRun
com.bombich.ccc-user-agent
com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
com.leadertech.PowerRegister.SEA1.UUID
com.adobe.AdobeCreativeCloud
com.carbonite.carbonitestatus
com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
com.apple.MassStorageCamera.315272.UUID
com.adobe.ARM.UUID
com.bombich.cccuseragent
com.seagate.dashboard
com.adobe.CS5ServiceManager
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.adobe.ARM.UUID
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.hp.scanModule3.64216.UUID
com.carbonite.carbonitealerts
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
/Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
/Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
/Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/MicrosoftMouse.kext
- com.microsoft.driver.MicrosoftMouse
/System/Library/Extensions/Seagate Storage Driver.kext
- com.seagate.driver.PowSecDriverCore
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/AdobeExManDetect.plugin
- com.AdobeExManDetectLib.AdobeExManDetect
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/DashboardPreferences.prefPane
- com.seagate.dashboard.preferences
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/Microsoft Mouse.prefPane
- com.microsoft.microsoftmouse
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
- com.dashlane.dashlanesafari
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Dashlane.plugin
- com.DashlaneLib.Dashlane
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Apps
/Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
/Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
/Applications/Google Drive.app
/Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.TBDecorator.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.TBDecorator.plist</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>33</integer>
<key>Weekday</key>
<integer>4</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.sony.PMBPortable.AutoRun</string>
<key>OnDemand</key>
<true/>
<key>Program</key>
<string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.bombich.ccc</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be permanently deleted.
• Files on the destination will be updated if the size or modification date differs.
• Older versions of updated files will not be archived.
</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc-user-agent</string>
<key>Program</key>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<string>--type=service</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>Sockets</key>
<dict>
<key>ServiceProcessSocket</key>
...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.leadertech.PowerRegister.SEA1.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
</array>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.seagate.dashboard</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
<string>-runMode</string>
<string>autoLaunched</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Global login items
/Applications/HP LaserJet Software/HP Setup Assistant.app
/Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Google Drive
- /Applications/Google Drive.app
Canon IJ Network Scanner Selector2
- /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
Android File Transfer Agent
- /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
AdobeResourceSynchronizer
- /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
Eye-Fi Helper
- /Applications/Eye-Fi/Eye-Fi Helper.app
Google Chrome
- /Applications/Google Chrome.app
Launch Nikon Message Center 2
- /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
Desktop: 125
Elapsed time (s): 584 -
Questions on "FAQ - SAP Solution Manager for VARs"
Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
RichardHello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich -
Why am I getting this error message, "Disk is too slow. (Prepare) (-10001)"
Hello all! I've been using GarageBand for a while now and I've accumulated quite a few files. Along with all of my movies and iTunes library, my internal hard drive filled up rapidly and I didn't catch it. I received a warning message on my screen one day saying that my hard drive was nearly full and I only had a few MB available. I'm using a 150 GB Solid State Hard Disk on my 2009 MacBook Pro (2.6 GHz Intel Cre 2 Duo, 4 GB of RAM). I remembered reading a while back that it's better to use an external hard drive for pretty much everything when using Garageband, so I bought one. I now have a seagate 500 GB, 5400 rpm external (USB 2.0) and I moved ALL of my movies and music over to it. I freed up around 60 GB of space on my internal hard drive in doing so.
So now that I've given you a little background, let me explain the issue I'm having. Before I noticed that my hard drive was full, I started receiving this error message:
Disk is too slow. (Prepare)
(-10001)
Upon receiving this message, I was unable to do pretty much anything in GarageBand. I couldn't listen to tracks, export to iTunes, or do anything! All I'm using GarageBand for is editing. My band and I do all our recording (and mixing) offsite at a separate studio and i just deliver a 2 track stereo signal (L/R) to my MacBook. From there, I just cut the individual tracks from a block of 30-45 minutes of recording because we just record our entire studio session and mix everything there. I pretty much never have more than two tracks and a few effects going at the same time.
After I realized that my disk was nearly full, I consulted my brother-in-law. He's head of the IT Deartpment at a major hospital here in West L.A. and he told me that I may have created a problem with the cache by filling up my internal hard drive and that I may still have issues with performance even after I free up space. He then told me that I may need to reboot my MacBook a few time to "free up the cache" (or something close to that, sorry guys I'm not that tech-savvy). It seems he may have been right, as I'm still experiencing the same issue. I rebooted around 10 times overall to no avail. I'm still using my internal hard drive to store the files that I'm working on (temporarily) because USB 2.0 is way too slow for my liking, when using GarageBand.
I've read quite a few articles on this offering solutions such as:
1. Do a complete Uninstall and Reinstall of GarageBand
2. Clone my hard drive to my external, format it, and reinstall everything back on it
3. Get a hard drive that supports Firewire 800 (The HDD I bought is USB 2.0, but it has two USB cables to increase speed, but I only have 1 port and I tried a powered USB Hub, but this HDD won't work with it for some reason).
4. Use different editing software.
5. Take it to Apple!
Will any of these things fix my problem? Are some better than others? Before I do anything, I wanted to ask this question on the furum to see if anybody had an easier (or cheaper!) solution. Any suggestions, tips, or advice would be much appreciated, as my band is starting to get on my case about finishing our CD! Thanks...Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob -
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
HP Laserjet M1132 MFP is too slow over the network!
Hi,
My HP Laserjet M1132 MFP is too slow over the network!
I have connect the printer to a windows XP 32bit SP3 using UBS port. The printer works fine on the local computer but when sharing it over the network it works too slow, for example with print test page it takes about 45 seconds to print and for other documents it takes much longer time.
I have installed the latest driver form HP website and upgrade the firmware it the latest version.
It happens on other Windows XP machines as well.
I connected the printer to my laptop (Windows 7 64bit) and it works fine (No delays over the network) and it seems that this problem have some relations with the windows XP Driver.
I have used local port trick on remote machines (instead of regular method) like this:
''add a local printer;
'new port'
'localport'
\\XPcomputer\HPPrinterName as port name
but still nothing!
There is nothing wrong with the network, we use to use a Samsung printer on the same machines over the network with no problem.
I Really appreciate your HELP!
This question was solved.
View Solution.BEHZAD_T, how is the printer connected to the network (wireless or Ethernet)? If it is slow wirelessly, I would suggest trying to connect the printer to your router with the Ethernet cord and install it to the networked computer that way.
Another question is, relatively speaking, how close to your router are the Samsung printer and the HP printer? Depending on the distance (and what stands between the devices) there can be a lag between sending a print job and it being received by the printer.
Let me know! -
Solution Manager does not get service definitions from SAP in self diagnosi
Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
RussHi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi -
Solution Manager Install Error
Hi All,
I'm trying to to a clean install of Solution Manager 4 on Windows Enterprise Server 2003 SP1, SQL Server 2005 SP1.
I've run the Pre-Installation Check and all is OK.
At Step 10 of 42, Create/modify database schema I'm getting an error:
ERROR 2006-09-22 17:01:59
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
Can anyone help?
Thanks in advance,
NicWe resolved the problem.
Problem:
Installation of 7.0 using MaxDb on Windows x64 hangs on the sapinst at the step CreateDbSchema..
There is no error in the installation log.
We are using the specified JDK (JAVA development kit) as specified by OSS Note 723909 which is downloaded from a special website of SUN.com.
We have tried uninstalling the other versions of the JDK build and tried other builds.
Solution:
By searching message boards for the specific error CreateDbSchema, one of the threads mentioned that passwords for MaxDb can't have special characters. Searching OSS yielded a Note 674430 which confirmed that installing on MaxDb has to use alpha-numeric. We were using an @. We dropped the database and deleted the user so it would be a clean install, and ran again using a different password. Some other cleanup was done too, but we suspect it was the password.
Maybe you are looking for
-
Editing SystemExec.vi to wrap up a program
Hi there, I'm just full of questions today. I'm using SystemExec.vi to run a small, DOS-based external program. I then take the output that's sent to the console and manipulate it a bit. The problem is, the external program I'm executing does somethi
-
Just wanted to know from you if you have aby idea about this or if you can make suggestions on this. This is relating to the Bank Acceptance Draft (B.A.D.) in China, For example, company receive the BAD from our customer on 2008-3-31, but the BAD due
-
As opening an xml file in excel?
I can not open a xml file in excel, and I get a message that is not a valid spreadsheet, and if the same file can be opened from a normal machine, anyone know how?
-
XPath in receiver determination: Check content of elements that exist 0..n
Hi all, I have a simple requirement in a receiver determination. In the structure of the XML message, there is a node "STATUS" with an element STATUS_CODE. This STATUS node can appear 0 or 9999 times. I want to check if there is ANY STATUS with STAT
-
A friend gave me her 500mhz iBook G3 to play with. Upon startup I get the missing system folder icon. I tried putting in an old G4 Restore CD and it begins to load into OS 9 but encounters a bus error and can not continue. I also tried my Tiger insta