Solution mnager - I m exploring SDTM

Hi All,
I m exploring SDTM but cud not understand the use of it.....as whenver a developer wants tester to test in CHARM flow the status is to be tested then why should a separate transaction type needs to be created ?
Please Help me out.

Hi,
Basically SDTM is used to fix errors for normal corrections when the project cycle is in test phase;
In a CHARM scenario, after having set the normal corrections to status "consolidated", then you can shift the maintenance cycle to test phase, and the transport request in the normal correction will be released and imported to test system.
Now however if problems occur in the targeted system what can be done ?
one is shift the cycle back to in development phase and create a new normal correction
the other is to use SDTM without shifting the cycle's phase
Hope this helps.
Cheers
Sh

Similar Messages

  • Solution Mnager Key for SCS?

    Hi Experts,
    Is it mandatory to have Solution manger key for standalone Installation of NW 2004s portal and it is a DEV system.
    Any information can be appreciated.
    Sudhir

    Hi
    Solution manager key is required even for the standalone EP 7.0 (NW 2004s) installation for any system. The key is valid only for one month.
    Thanks & regards
    Arun Singh

  • Solution mnager eeror

    Dear Expertise,
    When i am trying to give approval for support pack from solution manager in SOLUTION_MANAGER tcode,
    In perform implementation step, i am getting 2 errors.
    1.Status was reset by system
    2. the product maintenance is not completed in all system of the procedure
    Can  any one plz suggest me.
    Thanks in advance
    Regards
    Dilip Pasila

    status was reset by system means, some other tcode entry is not cleared i think.
    once check the Note
    SAP note 1296589 Maintenance Optimizer - cannot continue to step.
    and check this on your system
    SPRO
    -> Solution Manager Implementation Guide
    -> SAP Solution Manager
    -> Configuration
    -> Scenario-Specific Settings
    -> Change Management
    -> Change Request Management
    -> Extended Configuration
    -> Change Transaction
    -> Change Transaction Types
    -> Consistency Checks  in Change Request Management
    -> Assign Conditions to Status Values
    Please change the condition 'SYSTEM_ASSIGNMENT' for the
    transaction type 'SLMO' in respect of the message type from 'Cancel'
    to 'Warning'.
    If you received the message even though there are no other open
    maintenance transactions for the system in the solution,
    please implement the note 1165890 to resolve the problem.
    and in SMSY, the specific system is maintained correctly ? also check if the system data is maintained at OSS too
    Note 169293 - System data maintenance
    Note 172481 - System data maintenance (collective note)

  • SM:EXEC SERVICES job getting failed in Solution manager

    HI All,
    SM:EXEC SERVICES job getting failed in solution mnager and job log will be fowlloing:
    01-31-2012 19:09:21 Job started
    01-31-2012 19:09:21 Step 001 started (program RDSMOPBACK_AUTOSESSIONS_ALL, variant , user ID BASISUSER)
    01-31-2012 19:09:21 MemSize Begin = 796480   Bytes
    01-31-2012 19:09:21 *******************************
    01-31-2012 19:09:21 MemSize Begin = 1919120   Bytes
    01-31-2012 19:09:23 Solution <000000106120000> "SID..." is being edited (Operations)
    01-31-2012 19:09:23 <000000106120000> "SID..."(Operations)
    01-31-2012 19:09:23 "Create_Periodic_Services" uses = 0  bytes
    01-31-2012 19:09:23 "Create_Periodic_Services" uses = 690  us time
    01-31-2012 19:09:23 Trying to perform session EC2000000001313
    01-31-2012 19:09:24 MODEL_KEY: SID Installation Number: 6  MODEL_MODE: E  MODEL_VERSNR 00001 MODEL_CLASS: EWA Data Model
    01-31-2012 19:09:30 Definition nicht vorhanden
    01-31-2012 19:09:33 Definition nicht vorhanden
    01-31-2012 19:09:45 Internal session terminated with a runtime error (see ST22)
    01-31-2012 19:09:45 Job cancelled
    St22 Dump:
    The exception 'CX_DSVAS_API_CONTEXT_INSTANCE' was raised, but it was not caught
      anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLDSVAS_PROC' has to be
    terminated.
    Please suggest how to proceed further and provide your valuble inputs
    Thanks
    Nekkalapu

    HI Siva,
    I have done the changes according the note but still same problem.
    Please suggest any other ways to resolve this issue .
    Advance thanks
    Regards
    Nekkalapu

  • Question about Alert Framework in Solution Manager

    Hi all,
    We are planning to use Solution Manager as Central Monitoring Server, so I want to know what the advantage to use Solution Manager is, especially in Alerting.
    We can define auto-reaction methods for monitors to send CCMS alerts to Alert Framework where the alerts can be forwarded to the personal responsible via Email or CCMS.
    Is there any difference when using Solution Manager? Which additional functions dose Solution Manager provide in alerting?
    In normal SAP Alert Framework, you can only define one receipt for escalation. Can Solution Manager support multiple level escalation? For example, an alert is sent to A, if the Alert is not confirmed by A, then the alert is forwarded to B automatically. The same way the alert can be forwarded to further persons.
    Any idea?
    Thanks!
    Regards,
    Hui

    Hi Hui,
    On my opinion there is no any advantage in useíng SAP Solution Manager as central alerting systems in respect to RZ20. The arguments are as follows:
    - in SAP Solution Mnager you have performance restrictions on number of alerts to be displayed in one screen caused by the fact that the alerts are displayed in HTTP format
    - All the customizing in SAP Solution Manager for System Monitoring is Solution specific and not transportable. It means that if you have got corrupted your system monitoring session (that happens not seldom) your settings are lost. If you have created another Solution for the same systems you have to perform customizing from the scratch
    - Customizing is also not very esay to do. I would do recommend to use "User defined Alerts" Please have a look at the SAP Note 1023959 fro this topc
    - SAP Solution Manager does not provide alerting mechanism -> you have to relay to ALM in any case. Here by the way to your second question I would say that it is possible implement exactly process you have described. In the ALM category you can use button escallation to define another person that would be informed via e-mail in case the first Recipient have not completed alert from this category within predefined time
    + The only feature that is unique with System Monitoring with SAP Solution Mnager is the possibility to change threshold values for all the MTEs / MTE Classes that are defined in User Define Alerts an one button click
    At the conclussion I would say that there are some custommers that are using SM as monitoring platform But more pragmatical would be to configure RZ20 with help of Rule-based alerts and self- defined system groups and use ALM as alerting infrastructure. In this case you can save in plain XML file your Alert configuration and export it in any other system. ALM has on my opinion enogh functionality for alerting
    Best Regards
    Andrey

  • Internet explorer consuming huge memory when OBIEE reports Run

    Hi all,
    I am running OBIEE report. But when reports run for displaying results, then Internet Explorer consumes huge memory( can view in Task Manager) and so all other application becomes very slow and dont work. I am using XP operating system and 1 GB Ram. OBIEE is installed at Server and i am running report at other system by accessing URL of the server.
    Please tell me the solution so that Internet Explorer does not consume huge memory.
    Thanks,
    Avnish

    Use FireFox.

  • Cisco 5.0 ACS Solution engine

    Hi,
    Just installed and finished intail setup of ACS version 5.0 Sol. engine. Next i'm not able to acces solution engine over internet explorer. Even not able to telnet port 2002.
    Do i need to configure anything else for enabling gui in version 5.0?
    Please assist.
    Thanks!
    Kamal
    [email protected]

    ACS 5.x doesn't work on PORT 2002 like ACS 4.2, it works on https-443 so in order to use ACS 5.x, you should URL
    https://
    To log in to the GUI, you must use the predefined username ACSAdmin and password default. When you access the GUI for the first time, you will be prompted to change the predefined password for the administrator. You can also define access privileges for other administrators who will access the GUI application.
    Rgds, Jatin
    Do rate helpful posts~

  • Internet Explorer is not working.

    Dear all,
    Today i am getting another problem with my mac book.i am running my applemac book air laptop and i am trying to install internet explorer 5.2.3 after installing when i clicking on the browser so it's showing one message
    You can not open the application internet explorer because power pc application are no longer supported""
    please check and give some appropriate solution.
    Vijay jawre

    Internet Explorer is FAR outdated for the Mac.  Microsoft stopped supporting it... Therefor, the application does not work with Lion in any way.  You cannot, and SHOULD NOT, be using IE for ANYTHING.  Use Safari, the built in Mac browser, Google Chrome, or Firefox. 

  • Explorer.exe error on windows 8 with blank message and a yellow warning with ok button

    Whenever i boot my laptop the attached screenshot is always popping up, it shows a window with "Explorer.exe" with a yellow warning sign and a "OK" button. 

    ok, I found a possible solution here:
    [FIX] Getting “Explorer.exe” Error On Windows 8 Start Up
    http://www.kapilarya.com/fix-getting-explorer-exe-error-on-windows-8-start-up
    Open regedit.exe, go to
    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
    and delete the highlighted string "Load". This should fix the issue.
    "A programmer is just a tool which converts caffeine into code"

  • Windows 8.1 Explorer crash only on graphic extension files *.jpg *.png etc

    Like in title, when right click on graphic files explorer crash.
    No alerts no windows with some solution text etc. Explorer just shut down and restart...
    Please help me, I'm getting tired of this OS, way more buggy than windows 7.

    Hi,
    Did you install any application recently? According to your description, it seems like Shell Extension caused this problem, you can use ShellExView tool to check shell extension.
    ShellExView: http://www.nirsoft.net/utils/shexview.html
    Roger Lu
    TechNet Community Support

  • Windows Explorer has STOPPED Working

    OK, I have iTunes 8 installed, the allegedly CORRECTED version. When I start iTunes 8, I receive a message that says, "Windows Explorer has Stopped Working" and gives me two options:
    First Option - Check online for a solution and restart the program (Program being Windows Explorer).
    Second Option - Restart the Program (Program being Windows Explorer).
    Option One does not provide a solution, just restarts Windows Explorer!
    Option Two restarts Windows Explorer.
    When I choose to "View the Details" of the error, I receive the following:
    Problem signature:
    Problem Event Name: BEX64
    Application Name: Explorer.EXE
    Application Version: 6.0.6001.18000
    Application Timestamp: 4791970c
    Fault Module Name: UndWinExpShExt.dll_unloaded
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 48801d73
    Exception Offset: 0000000004f3273a
    Exception Code: c0000005
    Exception Data: 0000000000000008
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 09ef
    Additional Information 2: c6a2b1bd6acb10012eb7d5dd1b45e415
    Additional Information 3: 3a70
    Additional Information 4: 0185804ddbcb00af322d2112cbd2b831
    No other error codes are provided and everything works OK, just this hiccup in the giddy-up along the way of iTunes 8's start up routine.
    Is anyone else having this issue with iTunes 8?
    Thanks ~~ Gunny

    I THINK that this is the repeated one, because I was doing it one after the other. And yes, as far as I know, everything is up to date. I'm fairly advanced when it comes to computers, but this has me boggled.
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: explorer.exe
    Application Version: 6.0.6002.18005
    Application Timestamp: 49e01da5
    Fault Module Name: objc.dll
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 4a5f5419
    Exception Code: c0000005
    Exception Offset: 00008373
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Extra information about the problem
    Bucket ID: 1454080905

  • Asynchronous drag to file explorer

    Hello,
    I made a file upload/download application (ssh/sftp + metadata). My application shows a tree + a list of remote files. I'd like to be able to drag one from the list to a windows explorer.
    Alas, I can't see a way to solve this: how can I initiate a transfer in the background and drop the downloaded file to the target folder, without blocking the gui?
    Did a lot of search for this, but I guess this is a guru topic. Or is it infeasible?

    Well, I was hoping to be able to just use override TransferHandler. I didn't try further, because the overriden method has to return something ; creating a thread wouldn't return a result directly, so I know this isn't my solution.
    You said explorer should download the file... But how can I give a File object back to Explorer, if I didn't download it myself yet ?
    Here is my TransferHandler:
    private class FileTransferHandler extends TransferHandler {
    @Override
    protected Transferable createTransferable(JComponent c) {
    final File targetDirFile;
    try {
    targetDirFile = File.createTempFile("happypf", "tempdir");
    } catch (IOException exception) {
    throw new RuntimeException(exception);
    targetDirFile.delete();
    targetDirFile.mkdir();
    final List<RemoteFile> remoteFiles = getSelectedRemoteFiles();
    // this is my problem... I need to do something with those remoteFiles...
    Transferable transferable = new Transferable() {
    public DataFlavor[] getTransferDataFlavors() {
    DataFlavor[] flavors = { DataFlavor.javaFileListFlavor };
    return flavors;
    public boolean isDataFlavorSupported(DataFlavor flavor) {
    return flavor.equals(DataFlavor.javaFileListFlavor);
    public List<File> getTransferData(DataFlavor flavor) throws UnsupportedFlavorException, IOException {
    if (!isDataFlavorSupported(flavor)) {                       
    throw new UnsupportedFlavorException(flavor);
    return new ArrayList<File>();
    return transferable;
    //[... removed canImport / importDate for explorer->java, which work...]
    }

  • Solution Manager Does not start

    Dear All,
    I am not able to connect to Solution Mnager through SAP GUI, So I have stop the Server from SAP Management Console.
    After that when I tried to start, it didn't start. Oracle Database is started and running.
    So I have restart the Machine. After that I am not able to my SYSTEM ID on SAP Management Console.
    Manualy also I am not able to start. Oracle Database is started.
    Thanking in Advance.
    Nirav

    Dear Uday,
    Thanks for your reply.
    1. Logon pad information is correct.
    2. listener is also running. I h ave checked status
    3. no log is generated.
    In event view, when I tried to start service, it shows following error :
    "The SAPSM2_01 service failed to start due to the following error:
    The system cannot find the file specified.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
    Thanks
    Nirav

  • Why can't i download adobe reader  on my windows vista. Error message is invalid key

    I can not download Adobe reader. The installation begins, but then I get the message that the key is invalid. I don't know what means or how to correct it. How can I get a vaid key.

    That is a problem caused by Microsoft or one of their recent updates.  Here is the solution
    in the Windows Explorer address bar type %APPDATA%
    on the right-hand side double-click on the Microsoft folder
    now look for a folder named Crypto; delete it, or rename it to something like Crypto-old
    If you need more detailed help, tell us your Windows version.

  • How can I email Facebook images from Firefox?

    As a computer support person, I've switched many people from other browsers to Firefox, often touting that the Firefox interface is most similar to Internet Explorer than the other choices. This client's issue stumped me, however, and I haven't been able to come up with a solution for her. Rather than exploring other browsers, this is my last-ditch effort to come up with a Firefox solution.
    In Internet Explorer browsing Facebook, people can right-click on an image and email the picture to someone (family, friends, etc.). I can find no way to duplicate this functionality in Firefox. I go to other websites (tested this on Yahoo!'s main page) and I can right-click in Firefox and email the picture. In Facebook, no dice. (This may be more a Facebook issue, but I want to check with you folks first.)
    I can't find an Add-on that will do it. This seems strange, because apparently a lot of people like to have this ability. Any ideas or suggestions? DMS

    Adding 2 Suggestions to above reply:
    * Right click on the image and ''copy image location''. Then use '''''insert>image''''' to embed as remote content
    * Right click and '''''copy image'''''. Then paste into the e-mail.
    Make sure that you have the correct ''default e-mail service'' selected.

Maybe you are looking for