Solution need for multiple xml and Flowlist component

Hi! I am using multiple xml and AFComponents AS3 Flowlist component. I am having an issue with the thumbnails in the Flowlist component after about 20 or so user clicks, the images no longer appear, yet the threaded data is still there. http://www.littlewinggames.com/
I have tried changing some publish settings: hardware acceleration to Level-1 Direct and script time limit increased to 30???
Can anyone please help me to find a solution? Greatly appreciated! Lisa [email protected]

Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.

Similar Messages

Tips needed for multiple iPods and users with one PC...

We are a family of four, with four iPods and one PC. We have two (Windows) user accounts set up. My husband and son share one, and my daughter and I use the other. My husband's and son's music does not show up in my user library and visa-versa. There are some songs that my husband has purchased that I would like on my iPod, but there are songs that my daughter has that I DON'T want on my iPod. Is there a way to set up 4 separate librarys that can choose to share (or not share) songs?
Windows XP

When the iPods belong to different people, there are basically two ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library and or user account or
b) Creating multiple user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page:
Loading songs onto iPod shuffle - Windows
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
Using multiple iTunes libraries -Windows
Separate User Accounts
Another option (which you've already tried) is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

Can we Exceucte campaign for multiple countries and Regions?

Hi Experts,
can we execute the campaign for multiple countries and Regiong at time? or
Aany standard functinality for this type of requirement?
thanks in advance,
Regards,
Prameela

We don't support merging of multiple responses at this time. You could export your data and use an application like Excel to do this type of merging for you.

Can one create a smart playlist for multiple podcasts and to...

Can one create a smart playlist for multiple podcasts and to play one after the other on your iPod? I want to combine podcasts of the same topic in a smart playlist. When I tried to do this I chose smart playlist, album starts with, and then did it again for each podcast I wanted. That didn't work. If it can be done how do you do it?
I have a fifth generation iPod which is always updated to the latest as well as the itunes.

Say for example I want to put different car related podcasts in one smart playlist. Car related podcasts such as Wall Street Journal Car Cast and NPR Car Talk. Can it be done and if so how?

[svn:fx-4.x] 14255: Fix for ?xml and !DOCTYPE lines reversed in ASDoc DITA output

Revision: 14255
Revision: 14255
Author:   [email protected]
Date:     2010-02-18 12:39:52 -0800 (Thu, 18 Feb 2010)
Log Message:
Fix for <?xml> and <!DOCTYPE> lines reversed in ASDoc DITA output
QE notes: None.
Doc notes: None.
Bugs: SDK-25548
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25548
Modified Paths:
    flex/sdk/branches/4.x/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGener ator.java

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

Is it possible to use the same OSSO/OID for multiple R11 and R12 instances?

Hello guru's,
We have multiple R11and R12 instances that should be configured for Oracle SSO 10.1.4.3. For OID, we are still trying to decide between OID 10.1.4.3, or OID 11g. OAM is not an option because we also also need OSSO integration with Siteminder. We will also need to SSO-enable Discoverer an Forms.
I have successfully configured SSO for a single-instance EBS R12, but not for multiple instances, let alone include R11 and other components into the mix.
Do you have any special tips, guidance or lessons learned when SSO-enabling multiple instances into the same SSO/OID?
Thanks!
Maria

Interestingly, the article talks about using the same SSO/OID for EBS, JD Edwards, Peoplesoft multiple R11 instances, but did not mention 'multiple EBS versions'. Am I just being picky or there was a reason for it not being mentioned?In Steven Chan blog (in the same link), see the following:
Comprehensive Single Sign-On Solution+
If you have one or more E-Business Suite Release 11i instances and are tired of maintaining users separately for each environment, you can create a central OracleAS 10g environment and manage all 11i users in one place.
If you have a combination of PeopleSoft, JD Edwards, and the E-Business Suite in your organization, you can use OracleAS 10g to manage users for all three environments centrally.
If you have a combination of the E-Business Suite and custom applications based on Oracle databases or OracleAS 10g technology, you can use OracleAS 10g to manage users for all applications in a single place.
Thanks,
Hussein

How to configure for Multiple XML

Hi,
We were successful in working with single xml as a input. Now we are using multiple xml as a input for a single transaction. With the references and the suggestion in documents(working with xml files.pdf) related to Documaker we have changed configuration settings in FSISYS.INI and AFGJOB.JDT.
Down below we have mentioned those changes.
Input Extract file has been changed as F_Sch.DAT; following is the content in the extract file
COM_LOB_1111 .\INPUT\F_SCH1.xml
COM_LOB_1111 .\INPUT\F_SCH2.xml
COM_LOB_1111 .\INPUT\F_SCH3.xml
F_SCH1.xml,F_SCH2.xml,F_SCH3.xml
<?xml version="1.0"?>
<global>
     <lm>
          <COM>COM</COM>
          <LOB>LOB</LOB>
          <TRANSACTIONID>121212</TRANSACTIONID>
     </lm>
     <Foodcard>
          <Accname>Alex</Accname>
          <Email>[email protected]</Email>
          <Accid>1234123412341234</Accid>
          <Accno>1234123412341234</Accno>
          <Accaddr1>address1</Accaddr1>
          <Accaddr2>address2</Accaddr2>
          <Accaddr3>address3</Accaddr3>
     </Foodcard>
</global>
Changes to FSISYS.INI
< ExtractKeyField >
Key = 1,3
SearchMask = 1,COM_LOB_1111
< TRN_FIELDS >
COM = 1,3,N
LOB = 5,3,N
PolicyNum = 9,3,N
< DATA >
ExtrFile = C:\FAP\DLL\Computer\INPUT\F_Sch.DAT
AFGJOB.JDT
;ImportXMLFile;2;SCH=1,COM_LOB_1111 15,19
Inspite of those changes that made, we were not able to generate the output using three xml as a input.
***error details.***
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM17115: : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<XML Parse Error: The 1 chars before error=<C>, the 20 chars starting at error=< >>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<syntax error at line 1 column 0>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10292: in <RULXMLExtract()>: Unable to <DXMLoadXMLRecs()>.
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM13023: in RCBSendToErrBatch(): Unable to assign the transaction to the error batch. The SentToManualBatch field is not defined in the TrnDfdFile.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10947: in NoGenTrnTransactionProc(): Unable to RULLoadXtrRecs(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12018: in RPDoBaseFormsetRulesForward(): Unable to <WINNOGENTRNTRANSACTIONPROC>().
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12066: in RPProcessOneTransaction(): Unable to RPDoBaseFormsetRulesForward(pRPS, RP_PRE_PROC_A).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12064: in RPProcessTransactions(): Unable to RPProcessOneTransaction(pRPS). Skipping the rest of the transactions for this Base. See INI group:< GenDataStopOn > option:TransactionErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12004: in RPProcessOneBase(): Unable to RPProcessTransactions(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12001: in RPProcessBases(): Unable to RPProcessOneBase(pRPS). Skipping the rest of the Bases for this batch run. See INI group:< GenDataStopOn > option:BaseErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12127: in RPRun(): Unable to RPProcessBases(pRPS).
[04:16:51PM] Error: An error occurred during processing.
Kindly let us know in case of any solution for this issue.
Regards,
Balaji R.

It looks like it is unable to load your XML files. Depending on how your configuration is laid out, you may want to list full path names in your extract file - we make use of the same technique in 11.5, which I would imagine isn't terribly different in this respect from 12.0. Our configuration is such that we run Gendata at one level, read an extract file in the deflib folder, and the input files are in an input folder, so each entry in the extract file is C:\fap\mstrres\sampco\input\input1.xml.
Not sure if that is analogous to your setup or not, but based on the errors, either it can't find the file, so it is a pathing issue, or the file contents are invalid.
Tony

Need help loading xml parameter into component

I am using a third-party flash component (no source access)
that takes in a location of an xml file and manipulates it. The
problem is, I want that file's location to be dynamic and be loaded
from an argument to the end .swf that can then be forwarded to the
internal component. How can I load a component at runtime and set
it's xml_file parameter before/during construction of the object? I
have tried to drag it to the stage from components and change the
xml_file parameter in actionscript directly, but by the time this
change gets triggered the xml has already been read in and it
doesn't work.
This may be really simple, but I just can't figure it out. I
would appreciate anyone who could help. Thanks.

First, set the size of the component with the setSize method,
not "height" and "width". That may be the entire source of your
problem.
e.g.: this.componentInstanceName.setSize(175, 175);
Second, I am unsure all the parameters you specify in the
initialization object are valid {x:10, y:10, height:20, width:20,
font_color:'#333333', player:"vidPlayer", xml_file:"list.xml"}.
Only put in the initialization object parameters that are valid for
the component you are instantiating.
Third, make sure you are specifying the correct import
statements for your component at the top of your code. Since it is
a custom one, I can't help with knowing what to import. The code I
attached in my first post assumed import statements and the
components needed in the library, but here are the import
statements that I used:
import mx.controls.*;
import mx.containers.*;//for scrollPane
import mx.styles.CSSStyleDeclaration;
import mx.transitions.easing;
Fourth, don't forget the ignoreWhite method for importing XML
into Flash:
XML.prototype.ignoreWhite = true;// sets ignoreWhite
globally

User Datastore for multiple tables and columns!

Hi,
I hop so much, someone can help me.
I've made a user datastore to index multiple columns of multiple tables.
Now, the Documentation of Oracle explains the idexing of one table.
I have multiple tables, which have all, the columns descr and tagnr. I want to make a query sth like this:
select table1.column, table2.columnd... where contains(indexed field,'gas within descr',1)>0
is it possible to index 4 seperate tables, without having a collective key? I dont want to make a Concatenated Datastore.
I have wrote this code.
But it doesn't work. It's been compiled fine. But I don't get any result with my queries.
create or replace
procedure My_Proc_Wide
Must be in ctxsys schema.
In a full-scale example, this would be a wrapper
for a proc in the user schema.
rid in rowid,
tlob in out NOCOPY clob /* NOCOPY instructs Oracle to pass
this argument as fast as possible */
is
v_descr varchar2(80);
v_tagnr varchar2(30);
v_descr_name constant varchar2(20) := 'descr';
v_descr_start_tag constant varchar2(20) := '<' || v_descr_name || '>';
v_descr_end_tag constant varchar2(20) := '</' || v_descr_name || '>';
v_tagnr_name constant varchar2(20) := 'tagnr';
v_tagnr_start_tag constant varchar2(20) := '<' || v_tagnr_name || '>';
v_tagnr_end_tag constant varchar2(20) := '</' || v_tagnr_name || '>';
v_buffer varchar2(4000);
v_length integer;
begin
/* verify the env which called this */
if Dbms_Lob.Istemporary ( tlob ) <> 1
then
raise_application_error ( -20000,
'"IN OUT" tlob isn''t temporary' );
end if;
/* the real logic */
/* first tabel to be indexed */
select t1.tagnr, t1.descr
into v_tagnr, v_descr
from tweb.pdp_positions t1
where t1.rowid = rid;
v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/* second table to be indexed */
select t2.tagnr, t2.descr
into v_tagnr, v_descr
from tweb.pdp_schema_equ t2
where t2.rowid = rid;
     v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/*third table to be indexed */
select t3.tagnr, t3.descr
into v_tagnr, v_descr
from tweb.pdp_equipment t3
where t3.rowid = rid;
     v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
/* fourth table to be indexed */
select t4.tagnr, t4.descr
into v_tagnr, v_descr
from tweb.pdp_Projcode t4
where t4.rowid = rid;
     v_buffer := v_tagnr_start_tag ||
v_tagnr ||
v_tagnr_end_tag ||
v_descr_start_tag ||
     v_descr ||
     v_descr_end_tag;
v_length := length ( v_buffer );
Dbms_Lob.WriteAppend(tlob, length(v_buffer) + 1, v_buffer || ' ');
end My_Proc_Wide;
what have I to do, to make this work?
Any Help would be appriciated!!
Kind Regards,
Arsineh

Arsineh,
I realise that it has been quite some time since you posted this question but I thought I'd reply just in case you never did manage to get your user datastore working.
The reason your procedure will not work is simple. A user datastore procedure accepts a rowid input parameter. The rowid is the ID of the row that Oracle Text is currently trying to index. In the example you have given, you are attempting to use the supplied rowid as the primary key for multiple tables, this will simply never work as the rowid's across multiple tables will never correspond.
The best way to achieve your goal is to create the index on a master table which contains the common primary keys for each of your four tables e.g.
MASTER_TABLE
COL:COMMON_KEY (NUMBER(n))
COL:USER_INDEX_COLUMN (VARCHAR2(1))
If you create the user datastore index on the MASTER_TABLE.USER_UNDEX_COLUMN column your stored proc simply needs to read the correct row from the MASTER_TABLE (SELECT t.common_key into v_CommonKey FROM master_table t WHERE t.rowid = rid) and issue subsequent queries to extract the relavant data from the t1..t4 tables using the common key e.g.
SELECT t1.tagnr, t1.descr into v_tagnr, v_descr FROM t1 WHERE t1.[PRIMARY_KEY_FIELD] = v_CommonKey;
SELECT t2.tagnr, t2.descr into v_tagnr, v_descr FROM t2 WHERE t2.[PRIMARY_KEY_FIELD] = v_CommonKey;
and so on...
Hope this helps
Dean

Best Practice for Multiple iTunes and One Account?

My wife and I share our account for our iPhone Applications and Songs in iTunes.
Can someone point me to a topic that covers a best practice for multiple iTunes syncing?
I travel a lot and keep my iPhone synced to my Macbook Pro while she uses the workstation at home to sync to. We keep the addresses and contacts and calendars synced through MobileMe, however, I'm trying to find the best way of pushing applications and songs I've bought over to the other PC so they're still around while I'm traveling for her to sync with.
Thoughts?

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

Need for multiple ASM disk groups on a SAN with RAID5??

Hello all,
I've successfully installed clusterware, and ASM on a 5 node system. I'm trying to use asmca (11Gr2 on RHEL5)....to configure the disk groups.
I have a SAN, which actually was previously used for a 10G ASM RAC setup...so, reusing the candidate volumes that ASM has found.
I had noticed on the previous incarnation....that several disk groups had been created, for example:
ASMCMD> ls
DATADG/
INDEXDG/
LOGDG1/
LOGDG2/
LOGDG3/
LOGDG4/
RECOVERYDG/
Now....this is all on a SAN....which basically has two pools of drives set up each in a RAID5 configuration. Pool 1 contains ASM volumes named ASM1 - ASM32. Each of these logical volumes is about 65 GB.
Pool #2...has ASM33 - ASM48 volumes....each of which is about 16GB in size.
I used ASM33 from pool#2...by itself to contain my cluster voting disk and OCR.
My question is....with this type setup...would doing so many disk groups as listed above really do any good for performance? I was thinking with all of this on a SAN, which logical volumes on top of a couple sets of RAID5 disks...the divisions on the disk group level with external redundancy would do anything?
I was thinking of starting with about half of the ASM1-ASM31 'disks'...to create one large DATADG disk group, which would house all of the database instances data, indexes....etc. I'd keep the remaining large candidate disks as needed for later growth.
I was going to start with the pool of the smaller disks (except the 1 already dedicated to cluster needs) to basically serve as a decently sized RECOVERYDG...to house logs, flashback area...etc. It appears this pool is separate from pool #1...so, possibly some speed benefits there.
But really...is there any need to separate the diskgroups, based on a SAN with two pools of RAID5 logical volumes?
If so, can someone give me some ideas why...links on this info...etc.
Thank you in advance,
cayenne

The best practice is to use 2 disk groups, one for data and the other for the flash/fast recovery area. There really is no need to have a disk group for each type of file, in fact the more disks in a disk group (to a point I've seen) the better for performance and space management. However, there are times when multiple disk groups are appropriate (not saying this is one of them only FYI), such as backup/recovery and life cycle management. Typically you will still get benefit from double stripping, i.e. having a SAN with RAID groups presenting multiple LUNs to ASM, and then having ASM use those LUNs in disk groups. I saw this in my own testing. Start off with a minimum of 4 LUNs per disk group, and add in pairs as this will provide optimal performance (at least it did in my testing). You should also have a set of standard LUN sizes to present to ASM so things are consistent across your enterprise, the sizing is typically done based on your database size. For example:
300GB LUN: database > 10TB
150GB LUN: database 1TB to 10 TB
50GB LUN: database < 1TB
As databases grow beyond the threshold the larger LUNs are swapped in and the previous ones are swapped out. With thin provisioning it is a little different since you only need to resize the ASM LUNs. I'd also recommend having at least 2 of each standard sized LUNs ready to go in case you need space in an emergency. Even with capacity management you never know when something just consumes space too quickly.
ASM is all about space savings, performance, and management :-).
Hope this helps.

Solution needed for Blocked material problem

Hi Guys,
Scenario : There are two plants in a Location(Plant A & B) and a Customer.Now the Material is blocked so that after the sales order the material will not be allowed to move from Plant A to B as well as the
material will not be moved to the customer end.
Solution needed : I need to move the blocked material from Plant A to Plant B,But the material shouldn't be transferred to the customer end.
How should I proceed for this problem?
Regards
Jino.

hi,
Theres a functionality in the material master...MRP view were u cld deifne theplant spcfc material status were u cld define the status and even u cld fnd it in Sales organisation data were u cld block for the particular functionality...
PLS check that and define as per u r reqmnt.. and try
Hope this helps u out
Regards,
sravanthi
Edited by: Sravanthi683 on Jun 22, 2009 1:45 PM

Combined TO for multiple deliveries and multiple storage types possible?

Folks,
I would need to have 1 pick TO for a shipment which has multiple deliveries and materials that are stored over several storge type. With stanrd SAP this is not posible. Any ideas wether this can be achieved through a user exit?
Regards,
MdZ

Hello MdZ,
If you can suggest me regarding TO for Group...
Using VL06O (outbound delivery monitor); If I create the TO for outbound delivery, it prints the pick-sheet for each storage type.
But if I attach the delivery to u2018WM groupu2019 and then create the u2018TO for Groupu2019 using VL06O it does not create any pick-sheet.
If you can suggest somethingu2026
Regards,
JPS

Solution need for multiple xml and Flowlist component

Similar Messages

Maybe you are looking for