Solution needed for open firmware problem

I've been helping a friend set up a G4 that another friend had given him, and the firmware got utterly trashed. Here's the problem, the donator wiped the drive for security purposes (which is completely unrelated to the open firmware corruption).
When I say that its hosed, I mean it. I've tried every boot key sequence known to man. We need to figure out how to re-install (re-flash) the firmware. Its so toasted that when the power on button on the front of the case is pressed it glows for a few secs, then when the o f is supposed to kick in, the button goes dark. There is no boot chime. When powering it down manually using the button it lights up again until the machine is off.
Let this be a cautionary tale that playing with p-ram is not the safest course.
System specs:
G4 2001 Quicksilver 733MHz
512 MB RAM.

Hi, Stealth43 -
Welcome to Apple's Discussions.
There has never been a firmware update released by Apple for a G4 Quicksilver machine, so even if were possible to re-install one (which it is not), there is none available -
Article #86117 - Firmware Updates
The temporary glowing of the power button (only when pressed) usually indicates that the PMU needs to be reset -
Article #95037 - G4 (AGP) - Resetting PMU
That article is written around a G4 (AGP) model; however, the procedure also applies to all G4s except the G4 (PCI) model, thus includes QuickSilvers. The location of the PMU button varies from model to model; the location of it for a Quicksilver is shown on this diagram -
http://img142.imageshack.us/img142/9686/qsdalogicbd8aa.jpg
Note the warning about pressing the PMU button only once. Holding it down for a few seconds (5 to 10 or so) is okay, but do not press it again until the machine has been power-cycled.
In addition, if the battery in that machine has never been replaced it is time to do so - it has an expected life of only 4 to 5 years under ideal conditions. A too-weak or dead battery can cause booting problems. You can get a replacement at places like Radio Shack for about US$16, cheaper on-line.

Similar Messages

Solution needed for Blocked material problem

Hi Guys,
Scenario : There are two plants in a Location(Plant A & B) and a Customer.Now the Material is blocked so that after the sales order the material will not be allowed to move from Plant A to B as well as the
material will not be moved to the customer end.
Solution needed : I need to move the blocked material from Plant A to Plant B,But the material shouldn't be transferred to the customer end.
How should I proceed for this problem?
Regards
Jino.

hi,
Theres a functionality in the material master...MRP view were u cld deifne theplant spcfc material status were u cld define the status and even u cld fnd it in Sales organisation data were u cld block for the particular functionality...
PLS check that and define as per u r reqmnt.. and try
Hope this helps u out
Regards,
sravanthi
Edited by: Sravanthi683 on Jun 22, 2009 1:45 PM

Urgent Help is Needed for Database Installation Problems

How can we resolve the following database problems in Windows XP? Originally, we had Oracle 10.1.0.4.2, and we wanted to upgrade it to Oracle 10.2.0.1. We uninstalled Oracle Home ORAH1_DEV and then got the following problems while installing Oracle 10.2.0.1. How can we resolve all these errors so database configuration assistants can work successfully? Please help us with these ASAP. Thank you very much for your help and time in advance.
-Oy
These are the popup message we got.
POPUP 1. This appears 3 times, then ignore
Error in writing to file 'C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll'.[C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll(The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 2. Error in writing to file 'C:\OraHomes\ORAH_DEV\jdk\bin\java.exe'. [C:\OraHomes\ORAH1_DEV\jdk\jre\bin\java.exe (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 3. Erro in writing to file 'C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll'. [C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 4. Error in writing to file 'C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll'. [C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 5. Error in writing to 'c:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb'. [C:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel

Grace wrote:
Yes, I have it installed in the same Oracle Home. Is it possible to create it there? Or I must create a new Oracle Home for the new installation? Please reply as soon as possible. Thank you very much for your help.
-OyA specific ORACLE_HOME holds the binaries for a specific version of Oracle. You don't upgrade by simply installing a newer version of Oracle into the ORACLE_HOME of an older version. If you tried to do that you have probably irreversibly corrupted the original installation.
And there is no URGENT or ASAP here. We are all volunteers with regular jobs. If you have "urgent" support issues you need to open a Service Request with Oracle Support.

Scrolling solution needed for pdf imported to Cp 8 Responsive on the iPad

Using Cp 8, Responsive Projects, I imported a pdf (through the library import button) and placed it on a slide. When published (for devices), the pdf can be viewed on a computer and an iPad (if the Acrobat Reader app is installed). However, it can only be scrolled on the computer (a PC). The iPad just displays the first page.
Does it need a scrolling button or slider for the iPad? Does anyone have a solution for such? Russ_E offered a solution for the TOC. Would something similar work to view a pdf on the iPad?
Thanks in advance.

jerryfromtorrance wrote:
What version of GB is needed to open .band files created in GB for the iPad.
6.0.2
jerryfromtorrance wrote:
I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
although i ran GBX6 under 10.5.8, i do believe an intel processor is required. that means that the only complete solution would be a new computer, i'm afraid.
the best you could do is export each track as an audio file from GBi and drop them into your GBX project

Solution/Pattern needed for complex buisiness problem

We currently have a J2EE project built on EJB3 and were hoping to get some help on the design.
A little background: Our company sells several products for various companies. Each of these companies have different business rules, etc. Initially when we built our application we were unable to connect to the companies directly via Web Services, etc. And since we were not communicating with an external service, our input was the same for all of the suppliers (with minor differences). Now some of the suppliers have given access to them via Web Services. Since some have this type of service and other don't we have various iterations of rules, etc. You can see that the problem can grow very large very quickly with the diversity of external and internal services.
We would hate to code our business logic with a bunch of if then else (if (company a) then do this; else if ( . . . )). In addition like I said the input also differs per company so we also need to keep that in mind. Like any good application, we want to ensure that the UI is uniform and that the business logic is easily manageable. We need some form of a plug and play type of pattern that would allow us to manage these various services much easily rather than having to go to every business method to update it for the new supplier.
We were hoping if someone could recommend a solution/pattern that might do us some justice. Thank you in advance.
What we use now: STRUTS, EJB3 (stateless session beans), JBoss 4.04, Hibernate (DAO pattern), AXIS (web services)

We would hate to code our business logic with a bunch
of if then else (if (company a) then do this; else if
( . . . )). In addition like I said the input also
differs per company so we also need to keep that in
mind. Like any good application, we want to ensure
that the UI is uniform and that the business logic is
easily manageable. We need some form of a plug and
play type of pattern that would allow us to manage
these various services much easily rather than having
to go to every business method to update it for the
new supplier.A java rule engine might be the solution you are looking for. http://java.sun.com/developer/technicalArticles/J2SE/JavaRule.html

Urgent solution needed for the Problem ( get all the combination from table

we are having a table in following format
day | grpID | pktID
sun | 1 | 001
sun | 1 | 002
sun | 1 | 003
sun | 2 | 007
sun | 2 | 008
sun | 2 | 009
mon | 1 | 001
mon | 1 | 002
mon | 1 | 003
mon | 2 | 007
mon | 2 | 008
mon | 2 | 009
tue | 1 | 001
tue | 1 | 002
tue | 1 | 003
tue | 2 | 007
tue | 2 | 010
1. We have a combination of pkdIDs related with a specific grpID, for a particular day.
Ex: For Sunday, we have two combination list for grpID=1 is (001,002,003) and for group id = 2 is (007,008,009)
2. We need to get all the available combined pktid for each group id for all the days .
Eg the the expected result that is needed from the above table
(001,002,003)
(007,008,009)
(007,010)

SQL> with tbl as
2 (select 'sun' d, 1 grp, '001' pk from dual union all
3   select 'sun' d, 1 grp, '002' pk from dual union all
4   select 'sun' d, 1 grp, '003' pk from dual union all
5   select 'sun' d, 2 grp, '007' pk from dual union all
6   select 'sun' d, 2 grp, '008' pk from dual union all
7   select 'sun' d, 2 grp, '009' pk from dual union all
8   select 'mon' d, 1 grp, '001' pk from dual union all
9   select 'mon' d, 1 grp, '002' pk from dual union all
10   select 'mon' d, 1 grp, '003' pk from dual union all
11   select 'mon' d, 2 grp, '007' pk from dual union all
12   select 'mon' d, 2 grp, '008' pk from dual union all
13   select 'mon' d, 2 grp, '009' pk from dual union all
14   select 'tue' d, 1 grp, '001' pk from dual union all
15   select 'tue' d, 1 grp, '002' pk from dual union all
16   select 'tue' d, 1 grp, '003' pk from dual union all
17   select 'tue' d, 2 grp, '007' pk from dual union all
18   select 'tue' d, 2 grp, '010' pk from dual) -- end of data sample
19 select distinct '('||ltrim(max(c1) keep (dense_rank last order by lv),',')||')'
20 from   (select d,grp,level lv,sys_connect_by_path(pk,',') c1
21          from   tbl
22          connect by d=prior d and grp = prior grp and pk > prior pk)
23 group by d,grp;
'('||LTRIM(MAX(C1)KEEP(DENSE_RANKLASTORDERBYLV),',')||')'
(001,002,003)
(007,008,009)
(007,010)
SQL>That works on 9i. Other possiblities on 10g.
Nicolas.

Solution Needed for ODI function call

Hi Experts,
I am using ODI 11g.
Currently i am using oracle procedures to call a function in ODI .
just like "Select package_name.function_name from dual " i am using this query in ODI variables.The output of the function
i am using in ODI mails .
So for this ..Suppose for any changes i need to go to the Oracle package and change the function logic...and then promote this
to production ..which is a time taking for me.
So i want to write this Function inside ODI variable and send the output to ODI mail ...So that i dont need DB side to promote
the code to production on every changes.
Please let me know whether this solution is good or not.
Thanks,
Lony

Hi,
under my opinion is good having all the logic inside ODI. But it depends from the complexity of the logic and the frequency of your change. If you change the logic once for year it's quite useless make this inside your ODI.
A good compromise could be to put a package_name.function_name step in your package.

Audio solution needed for noise & echo

I need to get rid of or minimize some noise in an audio clip in Final Cut Pro. There is also a bit of echo in it that I would like to minimize or eliminate as well. Also, if the solution to this requires frequencies or things of that nature, could someone give me a idea of what frequencies I could use. Even a range would help. Thanks! Here’s some further info: We recorded it in a bathroom with towels hung up to try to eliminate some echo, but there is still some echo. The only noise that can be heard is the woman's voice, who I want to hear because it is a voiceover, and the noise from the computer's internal mic, because of the computer running or whatever might have caused that. There's no street noise or anything else that I can hear. Hopefully that's enough info.

You should post this information in your other thread. Starting a new one will only cause confusion.
Now, you may have been subtly criticized in your other thread for not providing enough information but please keep all your responses there.
Thank you.
If you have lost your way in Apple Discussions your actual thread may be found here:
http://discussions.apple.com/message.jspa?messageID=10211861#10211861

MDM Solution needed for Toshiba Excite Pure 10.1 Tablet

Hello,
One of my clients, a Charter school, recently received 200 Toshiba Excite Pure 10.1 Tablets. Needless to say I need a MDM solution like yesterday for them.
Requirements being:
1) Basic MDM functionally
2) Ability to download software from a single browser to the tablets
3) Ability to sync with existing smart boards
4) Available education software that could be used with the Toshiba Excite Pure 10.1 Tablets.
Any thoughts?

As you already said above, the repair costs would be higher as purchasing a new device.
I think it would be possible to replace the screen but the question is: do you want to spend a high amount of money to fix it?
If I were you, I would not try to fix it. I would try to sell the device on ebay or similar platforms and would try to get good working 2nd device.

Help needed for WiFi connection problem

Hello
My wife's iPad2 with current iOS 8.3 sometimes will not connect to Wi-Fi - any ideas on how to correct the problem?
It's inconsistent!
Thanks for any thoughts about this.
David

If you want to do this in sql you've to use dynamic sql to select only columns having the data.
And you can always use end user tools like SSRS to display only columns having values by using expression for visibility property.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Visakh16-
Can you please help me on how can I achieve this using SSRS.
Thanks.
Hi Mutali,
Personally, I don't recommend using SSRS.
If you want to design a SSRS report,you should retireve all columns and specify column visibility for each column with following expression.
=IIF(Fields!SomeFieldValue.Value > 0, True, False) (Note:Supposing the data type of the field is INT).
You can refer to the solution as
Jingyang Li post above.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Solution needed for the following Requirement..

Hi Friends,
Need an answer for the following . Its for Voluntary Time Recording...
1) Maintain IT0007 with the percentage of employment for both part time and full time employees.
2) The Max Flexi-time for part-time and full-time employees is 37.5/40 hours per week.
3) Maintain attendance infotype.
4) Notification to be sent to the manager once the flexi-time reaches a limit of +15/-15 hours per week. This has to be done through workflow.
5) For the fulltime employees, the flexitime applicable is only +15 as they will maintain absence quota.
6) Once the request is approved , the flexi-time data has to get save in the database.
7) In the quota overview, the daily view is to be removed. The time accounts detail should not be there. The only relevant columns to be displayed are Key Date(Default is current date), Type(Flexitime) and Current Balance(in hours)
If you can please let me know of the configuration changes and workflow changes too...
Thanks,
Kumar

Moderator message - Please do not post your requirements and ask the forum to do your work for you.
post locked

Solution needed for PO details

Hi Experts,
While saving the purchase order in SAP, i want to send PO data to a web address (Internet mail address like yahoo or gmail). For this I have coded like this Inside of Method in Business ADD-ins. But mail is not going to the recipients address. Please help me.
DATA : W_DOCUMENT TYPE SODOCCHGI1,
           LW_MARA    TYPE MARA,
           LW_MAKT    TYPE MAKT,
           IT_USER    TYPE TABLE OF SOMLRECI1,
           IT_YUSER LIKE LINE OF IT_USER.
DATA: W_SENT_ALL(1) TYPE C,
        GD_ERROR TYPE SY-SUBRC,
        LD_RECEIVER LIKE SY-SUBRC.
DATA : LT_TXT     TYPE TABLE OF SOLISTI1,
         LW_TXT     LIKE LINE OF LT_TXT.
DATA : LT_PACK    TYPE TABLE OF SOPCKLSTI1,
         LW_PACK    LIKE LINE OF LT_PACK.
DATA : LW_EKPO LIKE LINE OF IM_EKPO.
LOOP AT IM_EKPO INTO LW_EKPO.
    SELECT SINGLE * FROM MARA INTO LW_MARA
     WHERE MATNR = LW_EKPO-MATNR.
    IF SY-SUBRC IS INITIAL.
      SELECT SINGLE * FROM MAKT INTO LW_MAKT
       WHERE MATNR = LW_EKPO-MATNR
         AND SPRAS = SY-LANGU.
      CONCATENATE LW_EKPO-MATNR '-' LW_MAKT-MAKTX
             INTO LW_TXT
        SEPARATED BY SPACE.
      APPEND LW_TXT TO LT_TXT.
    ENDIF.
ENDLOOP.
    IF LT_TXT IS INITIAL. RETURN. ENDIF.
    CONCATENATE 'The Purchase Order No.'
                IM_EKKO-EBELN
                'for the following'
                'materials has been posted:'
           INTO LW_TXT
      SEPARATED BY SPACE.
    INSERT LW_TXT INTO LT_TXT INDEX 1.
    INSERT SPACE INTO LT_TXT INDEX 2.
    CONCATENATE 'P.O. No.' IM_EKKO-EBELN 'Posted'
           INTO W_DOCUMENT-OBJ_DESCR
      SEPARATED BY SPACE.
    W_DOCUMENT-OBJ_DESCR = 'Hi'.
    W_DOCUMENT-SENSITIVTY = 'F'.
    W_DOCUMENT-OBJ_LANGU = SY-LANGU.
    LW_PACK-HEAD_START = 1.
    LW_PACK-HEAD_NUM   = 0.
    LW_PACK-BODY_START = 1.
    LW_PACK-BODY_NUM   = LINES( LT_TXT ).
    LW_PACK-DOC_TYPE   = 'RAW'.
    APPEND LW_PACK TO LT_PACK.
    IT_YUSER-RECEIVER = *bold*some web email address yahooor gmail*bold*
    IT_YUSER-REC_TYPE = 'U'.
    IT_YUSER-COM_TYPE = 'INT'.
    IT_YUSER-NOTIF_DEL = 'X'.
    IT_YUSER-NOTIF_NDEL = 'X'.
    APPEND IT_YUSER TO IT_USER.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        DOCUMENT_DATA              = W_DOCUMENT
        PUT_IN_OUTBOX              = 'X'
        COMMIT_WORK                = 'X'
      IMPORTING
        SENT_TO_ALL                = W_SENT_ALL
      TABLES
        PACKING_LIST               = LT_PACK
        CONTENTS_TXT               = LT_TXT
        RECEIVERS                  = IT_USER
      EXCEPTIONS
        TOO_MANY_RECEIVERS         = 1
        DOCUMENT_NOT_SENT          = 2
        DOCUMENT_TYPE_NOT_EXIST    = 3
        OPERATION_NO_AUTHORIZATION = 4
        PARAMETER_ERROR            = 5
        X_ERROR                    = 6
        ENQUEUE_ERROR              = 7
        OTHERS                     = 8.
      IF SY-SUBRC = 0 .
        MESSAGE I303(ME) WITH 'Mail has been Successfully Sent.'.
      ELSE.
        WAIT UP TO 2 SECONDS.
        SUBMIT RSCONN01 WITH MODE = 'INT'
         WITH OUTPUT = 'X'
         AND RETURN.
      ENDIF.
      LOOP AT IT_USER INTO IT_YUSER .
        LD_RECEIVER = IT_YUSER-RETRN_CODE.
      ENDLOOP.

hi,
Theres a functionality in the material master...MRP view were u cld deifne theplant spcfc material status were u cld define the status and even u cld fnd it in Sales organisation data were u cld block for the particular functionality...
PLS check that and define as per u r reqmnt.. and try
Hope this helps u out
Regards,
sravanthi
Edited by: Sravanthi683 on Jun 22, 2009 1:45 PM

Solution need for multiple xml and Flowlist component

Hi! I am using multiple xml and AFComponents AS3 Flowlist component. I am having an issue with the thumbnails in the Flowlist component after about 20 or so user clicks, the images no longer appear, yet the threaded data is still there. http://www.littlewinggames.com/
I have tried changing some publish settings: hardware acceleration to Level-1 Direct and script time limit increased to 30???
Can anyone please help me to find a solution? Greatly appreciated! Lisa [email protected]

Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.

Help needed for white screen problem with no shortcuts working on startup.

Im using a 20" mac OS X with leopard, When IMac turns on there is just a white screen with nothing happening so Iv tried using all of the shortcut command keys such as "command+R" with no success.
My main question is which cd will I need to get a hold of so i can completetly wipe the imac and start again fresh?
Any help will be appreciated.
Unsure of operating system being used as cant get onto Mac.

The install disc that shipped with the machine. Running Leopard and there's no recovery HD (CMD+R) feature. That only came with Lion.

Solution needed for java.lang.ClassCastException

My code+_
public class EmployeeResultsCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,"empCreateTxn", false))
am.invokeMethod("rollbackEmployee");
TransactionUnitHelper.endTransactionUnit(pageContext, "empCreateTxn");
// This controller is associated with the table.
OATableBean table = (OATableBean)webBean;
table.prepareForRendering(pageContext);
DataObjectList columnFormats = (DataObjectList)table.getColumnFormats();
DictionaryData columnFormat = null;
int childIndex = pageContext.findChildIndex(table, "DeleteSwitcher");
columnFormat =(DictionaryData)columnFormats.getItem(childIndex);
columnFormat.put(COLUMN_DATA_FORMAT_KEY, ICON_BUTTON_FORMAT);
// Implement the bound value for the Status Image
OAImageBean statusImageBean =
(OAImageBean)table.findIndexedChildRecursive("EmpStatus");
if (statusImageBean == null)
MessageToken[] tokens = { new MessageToken("OBJECT_NAME",
"EmpStatus") };
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", tokens);
// Define the OA Framework image directory
FixedBoundValue imageDirectory =
new FixedBoundValue(APPS_MEDIA_DIRECTORY);
// Define a binding between the image bean and the view object attribute
// that it will reference to get the appropriate .gif image value name.
// Note that the corresponding attribute values are obtained using a
// decode() in the EmployeeSummaryVO view object.
OADataBoundValueViewObject statusBinding = new OADataBoundValueViewObject
(statusImageBean, "EmployeeStatus");
// Concatenate the image directory with the actual image name (as retrieved
// from the view object attribute decode() statement)
ConcatBoundValue statusCBV = new ConcatBoundValue(new BoundValue[]
{imageDirectory, statusBinding});
// Tell the image bean where to get the image source attribute
statusImageBean.setAttributeValue(SOURCE_ATTR, statusCBV);
// For accessibility compliance, you always specify the alternate text for an
// image. Note that you should never use static text as shown (always source
// translatable text from Message Dictionary when setting display text values
// programmatically), and ideally, the alternate text should in this case
// should clearly indicate the status the image represents.
// Generally, we would recommend that you use a Switcher as shown for the
// Delete column to easily show different images with associated alternate
// text, but we wanted to show how to use a bound value also in this lab.
statusImageBean.setAttributeValue(SHORT_DESC_ATTR, "Employee status indicator");
Error
oracle.apps.fnd.framework.OAException: java.lang.ClassCastException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:597)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1133)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2318)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1717)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:45)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.lang.ClassCastException
     at kumarkris.oracle.apps.ak.employee.webui.EmployeeResultsCO.processRequest(EmployeeResultsCO.java:59)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:581)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1133)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2318)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1717)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:45)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
java.lang.ClassCastException
     at kumarkris.oracle.apps.ak.employee.webui.EmployeeResultsCO.processRequest(EmployeeResultsCO.java:59)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:581)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1133)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:937)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:904)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2318)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1717)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
     at OA.jspService(OA.jsp:45)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)

## Detail 0 ##
java.lang.ClassCastException
at kumarkris.oracle.apps.ak.employee.webui.EmployeeResultsCO.processRequest(EmployeeResultsCO.java:59)What is the code at line no. 59 ?
-Anand

Solution needed for open firmware problem

Similar Messages

Maybe you are looking for