Solution Packager- Error in the process
Solution SBO Packager 8.81 PL02 - There was an error during the creation of society,
This entry already exists in the following tables (ODBC -2035)
I was using the Packager of SBO and get this error when I load the package file to create a new base.
I hope someone can help, because this version is released in May and we pass our version 8.8 to this new but before it goes live.
Regards,
Erika
Hey,
Did you get ny solution, because am facing same error.
Please reply me
Thanks
Kevin
Similar Messages
-
Solution Packager- Error in the process (ODBC -2035)
Dear Expert,
I got below as error
Solution SBO Packager 8.81 PL08 - There was an error during the creation of society,
This entry already exists in the following tables (ODBC -2035)
Thanks
KevinHey,
Did you get ny solution, because am facing same error.
Please reply me
Thanks
Kevin -
Packaging error 2 (The media contains invalid NALU length)
Hi,
I am trying to publish live stream from Adobe Flash client that can be viewed on iOS device. One known issue is that the Flash client does not support AAC audio encoder when it publishes a stream, but AAC is required for iOS viewing. Thus I am using ffmpeg to transcode the audio to work around this issue. The setup looks like following:
Publish(h.264+Speex) Pull Re-Publish(h.264+AAC)
Flash Client Publisher -------------------> AMS -----> ffmpeg ---------------------> AMS
The command line I use for ffmpeg is like this:
ffmpeg -re -i rtmp://xxx.xxx.xxx.xxx/livepkgr/orgstream -c:v copy -c:a aac -strict -2 -f flv rtmp://xxx.xxx.xxx.xxx/livepkgr/livestream
This setup works perfectly if the original stream is published by Flash Media Live Encoder client. However, if the stream is published by a web page using Flash ActionScript client, the iOS won't play the stream. The root cause is that HLS module failed to generate the proper TS file. I get the following error in the Apache server log.
[Sat Aug 17 15:56:50 2013] [error] mod_hlshttp [500]: Packaging error 2 (The media contains invalid NALU length) when processing /hls-live/streams/livepkgr/events/_definst_/livestream/livestreamNum0.ts
I've tried various things to narrow down the possibilities regarding what could be wrong. Here are some of my observations:
1) The problem has nothing to do with audio. If I do audio streaming only, it works well. So in various experiement, I simplified the problem by doing video stream only. When using ffmpeg to transcoding, I used '-an' to disable audio stream.
2) If I use ffmpeg to save the stream into MP4 file first (say 1 minute long), and then publish that file, I got the same issue when iOS device is trying to retrieve content. The MP4 file generated is fine though. I can view it using VLC.
3) If I use ffmpeg to transcode H.264 to H.264 (i.e. Not to use the "copy" transcoder), it then will work. However, because of the CPU usage constraints in my requirement, I cannot adopt this approach. Here is the command line that works:
ffmpeg -re -i rtmp://xxx.xxx.xxx.xxx/livepkgr/orgstream -vcodec libx264 -b:v 1000k -c:a aac -strict -2 -f flv rtmp://xxx.xxx.xxx.xxx/livepkgr/livestream
4) In all those experiments, the m3u8 file are generated correctly. In the stream directory I always saw meaningful size for f4f and f4x files.
5) The iOS client is able to view the original stream fine if the original stream is H.264 video only stream. (The 'orgstream', not the one republished by ffmpeg).
6) In all those experiements, a regular Flash viewer client is able to play the live stream with no issue.
Since I don't have access to source code to the Apache module for HLS (mod_hlshttp), I don't know how to proceed further. I appreciate any help from Adobe engineering team who have access to source code, and give me some hint what could go wrong. I can also provide further information regarding the published stream, e.g. the generated MP4 if it can help.
Thanks and best regards,
Jason
Message was edited by: JsonThe one thing you didn't do is reset your Photoshop preferences.
Most likely the preferences got corrupted, and reference a corrupt preset. -
"error executing the process" rebooted there after it doesn't turn on
Hi.
I have an important problem with my Lenovo k900 brought in september 2013. It gave an error like this "error executing the process..." I reboot the phone, but since that moment the phone doesn't turn on.
I have tried a hard reset (power + volume(+)) but it doesn´t work.
When I press the power button, the lights below switch on for a few seconds, but the phone doesn't turn on.This is a tough problem to solve if your not experienced with fixing Mac's, you can opt to take it to a local PC/Mac tech to solve it or you can attempt things on your own.
If you opt for the local help make sure talk to them if you have backups of your data or not, thus may require data recovery efforts performed first before wiping and installing everything fresh.
Gray, Blue or White screen at boot, w/spinner/progress bar -
I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
ThanksMelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue. -
Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
RagavHi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak -
Hello dps team,
A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
Is there a problem with our dps version or any maintenance work at the servers from Adobe?
Best,
OliverHi Oliver,
Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
Thanks
Lohrii -
Error 1067 : The process terminated unexpectedely
Hi Everyone,
I'm getting the error when i am starting the Oracle BI Server services. The error is as below : Error 1067 : The process terminated unexpectedly.
On my machine OBI EE was installed and it was running successfully till today. But now it is giving me the above error. Please guide me as i'm new to this application.
Regards
Brijesh.Do check if ur NQS config file is updated properly with the repository name .
-
Error updating the process object in MSS workflow...
Hi All,
I copied the standard workflow 'WS18900010' and triggered the same in backend. In this the first step is to approve the form. I set the agent as WF Initiator for this step. Now I approved the form. But the workitem went into error giving the error message 'ERROR UPDATING THE PROCESS OBJECT'.
What could be the reason for this?
If the originator of request and approver of request is same(just for testing purpose), then may dis also result into above error?
Please suggest.
GuddanHello,
Please maintain this 'CL_HRASR00_POBJ_WF_EXIT' in the workflow exit for the specific task and also at the workflow header level.
Execute the process and if still error occurs, check for HCM P&F authorization and if it is fine, then check if the case settings are maintained correctly.
you can find the case configuration in HCM P&F help docu.
hope this helps.
Best Regards
Saujanya -
Error 1067: The process terminated unexpectedly
Hi all,
I found this error while I changed my WinNT 4.0 Administrator password, then
my Netscape Administration Server never started up anymore. What is the
problem exactly, and how can I fix it?
Any feedback would be deeply appreciated.
"Could not start the Netscape Administration Server 4.2 service on
\\MYSERVER.
Error 1067: The process terminated unexpectedly"
Best regards
Wilky WongThis one may help for the first one.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/206bd205-3dd8-411f-a3d2-b94667f84992/the-report-server-cannot-decrypt-the-symmetric-key-used-to-access-sensitive-or-encrypted-data-in-a?forum=sqlreportingservices
They can help you with the second one over here.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlexpress&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Hello experts,
I have a SBS 2011 Essentials installation that suddenly has an empty dashboard.
Event viewer:
APPLICATION LOG - Event ID: 1000 Source: Application Error
General Description:
Faulting application name: ProviderRegistryService.exe, version: 6.1.1840.0, time stamp: 0x4d6dafda
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0x80131623
Fault offset: 0x000007fe958b0717
Faulting process id: 0xff8
Faulting application start time: 0x01cf340bce30552f
Faulting application path: C:\Program Files\Windows Server\Bin\ProviderRegistryService.exe
Faulting module path: unknown
Report Id: 0befeb0f-9fff-11e3-852b-d4ae52c1faae
APPLICATION LOG - Event ID: 1025 Source: .Net Runtime
General Description:
Application: ProviderRegistryService.exe
Framework Version: v4.0.30319
Description: The application requested process termination through System.Environment.FailFast(string message).
Message: Unhandled exception in OnStart: System.ArgumentOutOfRangeException: Not a valid Win32 FileTime.
Parameter name: fileTime at System.DateTime.FromFileTimeUtc(Int64 fileTime)
SYSTEM LOG -Event ID: 7031 Source: Service Control Manager General Description:
The Windows Server Service Provider Registry service terminated unexpectedly. It has done this xx0 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
When I try to start this service I get 'error 1067 - The process terminated unexpectedly'. I have checked all dependencies of this particular service and they are all running properly. I've restarted these dependencies, disabled Kaspersky
protection, restarted the Server a few times to no avail.
Any ideas? Thank you!I had this exact same problem! Thank you so much Robert for posting a link to that script! That is truly an amazing Powershell script.
I had all the same errors that AK772 mentioned, but I chose to zoom in on a different issue that the script pointed out. When I ran the "Test CA Infrastructure" step it found several errors. When I looked at what the script was doing there it was
comparing the server certificate thumbprint in the registry (HKLM:\Software\Microsoft\Windows Server\Identity) with the personal certificates (Personal Certificates in the Certificate snap-in using MMC). When I looked through them individually, sure enough
the thumbprint in the registry didn't exist in my certificate store. I have NO idea how this could have happened!
However, from there, I changed my Google search criteria and found the following excellent article:
http://titlerequired.com/2013/04/29/windows-server-2012-essentials-an-error-prevented-the-dashboard-from-opening/
This told more about that error and showed how to regenerate the certificate identity in the registry. This totally saved me! Once I ran through the steps that he outlines, even though I got a timeout error towards the end, I could see that the certificate
thumbprint had changed in the registry and now existed in my personal certificate store.
Once I saw this, I tried going into services and manually starting the stopped "Windows Server Service Provider Registry" service. Sure enough it started right up, no error this time. Finally, I restarted the server so that all of the other dependent
services would come back up and re-ran the linked script above and everything was perfect.
Thanks so much for the breadcrumbs in this post and all of your contributions. I hope that this post will equally be able to help someone else through this very troublesome and evasive error! -
Error during the Process of Netting - No Identifier Found TPM_TRG136
Hi All
During the process of doing Netting , the system is popping up an error message as - No Identifier found. The message error is TPM_TRG136.
Can anybody suggest the solution for the error.
Ram KHi @artem98765,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you tried to do a recovery back to factory you received the error incomplete recovery.
As you did not state if how you were doing the recovery I will include documentation for the process along with a troubleshooting document.
HP PCs - Performing an HP system recovery (Windows 8)
HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)
If you are still unable to complete the recovery please contact HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
V:\>rmdir ME-EXCAS01 /s
ME-EXCAS01, Are you sure (Y/N)? y
ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
- The process cannot access the file because it is being used by another process
How to delete the whole folder ?
ThanksAlso, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Hi,
Im getting following error in the Monthly Process Chain :
"A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_D3VOS4BQNK1QJ98G29CU8EWFE in the chain"
Please advise...
Regards,
AnujaHi,
You need to add the "Attribute Change Run" process type after the infopackage load in the PC.
I assume the infopackage loads Master Data.
Thanks. -
Hi Experts ,
There is a acomplex BPM process. Avoiding the need to create it again , I copied the process.bpmn , process.bpmn.xlf and process.diagram from the src folder to the new Process.
I have the done the mapping again
Now but I am receiving about 100 errors that says
End 0 of link is missing. Existing end: (E0677A9A06082E58BFFE11DF8CC80050569C0CFD). Missing end:E02C978B5E97DCACBBFC11DFB63E0023144035B4. Link type: [Galaxy, Rule, ReferencePointToXsdFeature] (PF.MetaModelDataArea:DCs/sap.com/glx/ide/_comp/moin/meta/Galaxy.moinmm#46F2595D9C55A667676C11DCC2A6001321CBD1B1)
E0677A9A06082E58BFFE11DF8CC80050569C0CFD [Galaxy, Rule, Reference] Model Consistency Violation Marker.
Any pointers will be appreciated.Hi,
copying the files won't work. What you can do is copy and paste the graphical elements (pool, lanes etc.) into a new process diagram.
Regards,
Christian
Maybe you are looking for
-
QUESTION ONE: For example - the calendars were automatically changed to Bahasa. I changed them back - but they returned to Bahasa. The second time only some of the screens changed to Bahasa. More seriously I can't download apps anymore because it
-
Mavericks: Is Apple never going to do something about Mavericks many problems? I've about had it with Mac and when today's Mavericks update appeared, I declined. I updated to Mavericks 6 months ago on my new Macbook Pro and have had nothing but troub
-
Printing text in back side of the page in sap script
hi everybody, I had a problem on printing the terms and conditions of purchase order delivery in the back side of page in sapscript. plz help me by solving this, Thanks in advance sudheer
-
TS2446 My Apple ID is still disabled.
I have 2 iMacs, in one of them everything is perfect with Itunes, but in the other iMac my Apple ID is disabled, I've done everything from the Apple Support Communities but nothing seems to help, now I can't buy anything and it's frustrating, please
-
Tbs fragmentation and read only mode
hello sir how can move table to read only and tbs fragmentation is performance problem or something else. plz. reply thanx in advance.