Solution to Card and Book Issue

If you are having issues viewing or creating Cards and/or Books, the following solution may help:
If you boot in safe mode and are able to view cards/books and create them, your problem is likely because of duplicate fonts in your font library.
Reboot in normal mode, and open your font library. Locate the duplicate errors, and resolve duplicates.
Open iPhoto and you should now be able to view and create cards and books.
Let me know if this works for you.

Thanks!
In my case, I needed to do the following instead of that simply resolving the duplicates.
1. Open Font Book app.
2. Select all fonts.
3. Do "Validate Font" from File menu.
4. Locate all minor problems and serious errors.
5. Disabled fonts that are unnecessary and having problems.
6. Manually resolved duplicates (some duplicates are not automatically resolved).
-Ryujiro

Similar Messages

  • IPhoto 6.0.6 text not printed on cards and book

    I bought via iPhoto cards and entered texts. The text was not printed when I received it. A few days later ordered a hardcopy book : same problem.
    All texts are missing except the text on the cover of the book. What can it be ?
    Message was edited by: mardge

    Mardge
    Welcome to the Apple user discussion forums
    Report the problem to Apple - they will refund your cost and may have a solution
    US page - you probably should search for the returns page for Belgium - http://www.apple.com/support/photoservices/returns/
    Did you preview the book and the card before sending - http://support.apple.com/kb/HT1040 ?
    Doe the preview show the text?
    Is there anything unusual about the text that did not print?
    LN

  • Help! iPhoto card and book themes dissapeared

    There were no themes located. Until at least one theme has been installed, this feature will be unavailable.
    I get this message when I try to create a card or book in iLife '11
    I am fully updated

    umm...Ok, you are aware I got this from the mac app store, and I don't have the Mac OS X install disk
    Of course I always read the poster's mind so I know everything they do not bother to mention - then reinstall from the package downloaded from the App Store
    LN

  • Iphoto freezes when trying to create cards and books

    the iphoto app freezes every time i try to create a photo book. I am not sure what to do.

    It doesn't sound like you are actually in iPhoto. The way you can tell is, when you are doing whatever it is you do and the computer "freezes", look in the upper left corner right next to the Apple. What does it say?
    It sounds like Safari is the program having issues.
    Try going to the Safari Menu > Reset Safari. Uncheck the options for Remove other auto... and Remove Saved Names...
    See if that helps.

  • Can't use Calendars, Cards and Books- lost themes?

    Apologies if this is the wrong forum but I think this is more a problem with how I installed it rather than anything related to the actual products.
    Whenever I click on calendars already created, or on new calendar it keeps telling me that there are no themes installed and that this function won't work until they are- I think this might be because rather than installing the whole iLife 08 suite- (I didn't want the new iMovie) I simply dragged the previous installation I'd done on another mac (I bought a family pack) on to my iBook.
    So does anyone know where I'd find the themes or where to install them?

    Sri, Theo:
    Welcome to the Apple Discussions.
    simply dragged the previous installation I'd done on another mac (I bought a family pack) on to my iBook.
    Installing iPhoto that way didn't install all of the necessary support documents, including the themes. Delete the iPhoto application and install iPhoto, custom install to install only iPhoto, from the iLife 08 disk. Then run the iPhoto 7.1.1 and iLife Support 8.1.1 updaters. That will get you the themes back.
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • TV Card and overlay issues

    First of all, hello Archlinux people!...I love you
    But sadly, I've yet to find a solution to what (I think) would be an easy problem.  I have a Hauppauge PVR-150 tv-card, which appears to be set up correctly and whatnot ('dmesg | grep ivtv' doesn't give me any errors), but I still have problems getting anything working. 
    tvtime gives me:
    xvoutput: no XVIDEO port found which supports YUY2 images.
    ***tvtime requires hardware YUY2 overlay support from your video card driver.
    Similarly, xawtv and v4l-conf complain of not having overlay support:
    /dev/video0 [v4l2]: no overlay support
    So it appears I need to get this overlay thing worked out, but I'm not quite sure what to do...
    Any help would be greatly appreciated

    Alright, well I have an Intel 82915G/GV/910GL graphics card, so I went ahead and downloaded the intel i810 driver, and changed xorg.conf to use the new driver, as well as added Option "DRI" "true" and Option "XVideo" "true".  I also loaded agpgart as mentioned in the man page...
    Now tvtime works only if i limit the input width, otherwise I get an error complaining of not having enough off-screen video memory.  Once I start that up, however,  it tells me that ivtv has an invalid argument, and that it cannot open /dev/video0.
    v4l-conf and xawtv still tell me that there is still no overlay support.
    I've tried changing a couple options in my xorg.conf file...but nothing seems to work...
    Thanks for your support.
    EDIT: Actually, after upgrading to the new Xorg, tvtime no longer has the off-screen memory error, but everything else is still the same.
    Last edited by BetterLeftUnsaid (2007-11-06 02:47:34)

  • Can't open Cards or Books I have previously created

    I just upgraded to iLife 11 and now can't get into my previously created Cards and Books. Also, I tried creating a new card, but now can not get into that either. I seem to have all my Albums in tact, but can't open any of my Projects (although all are still listed). How to I get into existing projects?

    IIf you forgot your restrictions passcode, you have to restore your devoce using iTunes and you will totally erase the device. There is no way around it. if by some chance you have a backup that does not contain the passcode that you can't remember, you can restore that backup to remove the passcode. Otherwise, restore as new.
    You will have to download your eBooks again. If you are purchasing books for the iBooks store, most of those can be downloaded again at no charge as long as you use the same Apple ID that you bought them with - and as long as they are still available in the iBooks Store.

  • SD Card Issues and Sound Issues

    Hello all,
    I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
    However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
    I am having 2 issues:
    1st Issue:
    SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
    So I changed it to SD Card Storage and all is well (At least, that is what I thought).
    After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
    Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
    So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
    So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
    Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
    The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
    If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
    But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
    2nd Issue:
    Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm. 
    What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
    If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
    What am I missing here? Any thoughts?
    With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
    Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
    Solved!
    Go to Solution.

    Hello Rickard,
    Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
    I have to say, it does seem like that SD Card is defective
    Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
    If the problem goes away I would consider my 1st issue being solved
    However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
    It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
    Perhaps there's a setting I'm missing?
    Your help would be greatly appreciated.

  • Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit.  Now it just won't open.  When I click on the iphoto icon in the dock, nothing happens!  Does anyone have a solution to this problem please?

    Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit.  Now it just won't open.  When I click on the iphoto icon in the dock, nothing happens!  Does anyone have a solution to this problem please?

    As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Troubleshooting Address Book issues using Palm Desktop for Mac (v. 4.2.1) and a T3?

    Can someone please make suggestions which would correct the following issues?
    1) When printing an Address Book from my Mac, the information in the "title" field prints twice. (I have checked my Preferences settings & reviewed how I have entered the information, etc. and everything is in order; also, an Address CARD DOES print correctly --- and --- after syncing to my T3 and then to my husband's PC, an Address Book prints correctly from the PC.)
    2) After I have synced the Address Book from my Mac to my T3, the "zip code" entries appear BEFORE the "city" entries on the T3. (The zip codes appear correctly on my Mac and print out correctly.)
    3) After I have synced the Address Book from my Mac to my T3, the "contacts" all appear in BLACK on my T3. Is there any way to show the different "contact categories" in COLOR on the T3 as they were originally entered in my Palm Desktop for Mac?
    Post relates to: Tungsten T3

    I Use Windows And Cant Help Sorry
    -------------- Original message --------------
    Answer Request
    Dear joeweather45,
    HAR asked a question that matches your expertise. Please respond to this question by directly replying to this email or by clicking the link below.
    Question Subject: Troubleshooting Address Book issues using Palm Desktop for Mac (v. 4.2.1) and a T3?
    Question Details: Can someone please make suggestions which would correct the following issues?
    1) When printing an Address Book from my Mac, the information in the 'title' field prints twice. (I have checked my Preferences settings & reviewed how I have entered the information, etc. and everything is in order; also, an Address CARD DOES print correctly --- and --- after syncing to my T3 and then to my husband's PC, an Address Book prints correctly from the PC.)
    2) After I have synced the Address Book from my Mac to my T3, the 'zip code' entries appear BEFORE the 'city' entries on the T3. (The zip codes appear correctly on my Mac and print out correctly.)
    3) After I have synced the Address Book from my Mac to my T3, the 'contacts' all appear in BLACK on my T3. Is there any way to show the different 'contact categories' in COLOR on the T3 as they were originally entered in my Palm Desktop for Mac?
    Device Name: Tungsten T3
    Desktop Computer Operating System: Mac OS 10.3.x
    Desktop computer brand and model number: Mac PowerBook G4
    Desktop Personal Information Manager: Palm Desktop 4.2.1 Mac
    How is your device connected to your computer: USB
    Type of help question: Troubleshooting
    Your expertise is valued. Thanks in advance for your response!
    Need more information before responding to this question? Send a Request for Clarification to the question asker, entering any necessary details in the body of the email.
    Unable to answer this question? Click one of the links below and enter any necessary details in the body of the email. The reason and details you enter will be sent to the question asker.
    Busy | Inappropriate | Answered | Other
    Thank you for taking the time to send this notification. Your participation is valued and we look forward to your continued involvement.
    Sincerely,
    The palmOne Help Forums Team

  • I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?, I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?

    I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
    Thanks

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • I got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer availabe"..how do i fix this issue?im from singapore by the way

    i got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer available"..how do i fix this issue?im from singapore by the way

    If it is longer available then you can't get the app on your phone.

  • In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

    In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

    In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

  • HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

    i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

    Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

  • Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

Maybe you are looking for