Solution? to Error 3200 - it may be the firewall!!!

Hi.
I use an iPad 2, newest iTunes under Win 7 32 bit.
IOS 5 was offered and downloaded. Backup went throught, but at the end it said:
unable to restore ipad 2, Code 3200.
I deactivated the avast antivir AND included firewall, and also the windows firewall.
Update went through!!

Thank you so much! I am on a Mac and was trying to update my iPad 2 and received the "unknown error" message more than 15 times. I saw your post and turned off Firewall in Mac System Preferences, and tried again, and my iPad 2 is now updated! SOLUTION INDEED!

Similar Messages

I keep getting the error message on my MP510, the type of printhead is incorrect install the correct

Recently my printer stopped printing black, although it would print the other colors. When I tried to print a print pattern, it would not print the checkered pattern it used to print to check the alignment. I tried cleaning, to no avail. Then I got the message: the type of printhead is incorrect, install the correct printhead on my control panel. Now when I turn on the unit, I can't do any maintenance or anything, it just shows the same error message as noted. I talked to a Canon representative, and he said to clean the printhead, I did. That did not help. My questions are, is the printhead bad. Second, it would seem I can replace the printhead. Just what is the likelyhood the printhead is the probnlem, or is this problem a problem that can only be curred by a service tech? Canon informs me this printer is not serviceable anylonger? So, I guess I'm on my own? They offer a deal on another printer at a reduced price. Frankly, I don't think my printer needs to be replaced, just fixed. If all that it requires is a printhead, I'm sure I can do the replacement. Just what are the odds replacing the printhead will solve the problem? I'm quite certain this error message has occured before on this type of printer, and other users have probably figured out the solution? Can someone help? Thank you.
Rick

Hi sciencemagic,
The major cause for this type of error/issue is the printhead. In most situations, replacing the printhead will resolve the problem. However, the error may appear because of another internal malfunction with the printer.
Another thing to consider is the cost of a replacement printhead, which may exceed the cost of purchasing a newer printer. With the newer printer you also get access to newer printing features and technology including better image quality.
For these reasons, I recommend exploring the replacement option, but we are happy to help with any available service options for your PIXMA MP510. Contact us to discuss your options further.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have the b200 error and can't get the cartirdges to move out so I can change it.

I have a MX850 cannon. I have the b200 error and can see that the middle cartridge is empty but I can't get the ink cartridge holder tomove out. I have tried with power off but the ink cartridge holder won't move out.

Hi ernja.
The B200 error is a generic internal error code and could mean one of many things. Based on this, your PIXMA MX850 would require service. It is recommended that you contact live technical support . There is NO charge for this call.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What wireless port needs to be allowed through in the firewall to allow printing in Win 7?

I have a Selphy CP910 and the only way that i can get it to print wirelessly in Win 7 is to disable my Windows firewall and Windows Defender.
What specific ports do I have to allow through on the firewall to all wireless printing without totally disabling the firewall?

Hi rpavich,
The SELPHY CP910 uses the following ports:
80, 9100 and 8611
Allowing these through your firewall should allow you to print without disabling it.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

ITunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed.

I recently connected my iPhone to my computer, iTunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed - it said insufficient permission. I have administrative rights... please, any help and/or ideas will be appreciated.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

What may be the cause of this error java.sql.SQLException: invalid sql type passed to callable statement in iplanet ussing JNDI

Hi,
The possibilities can be of various reasons, with the sql statements,
xml descriptors, data sources, improper drivers anything. To crack down
the solution, kindly let me know the error messages and what exactly are
you trying to accomplish.
Thanks & Regards
Raj
manimaran t wrote:
what may be the cause of this error java.sql.SQLException: invalid sql
type passed to callable statement in iplanet ussing JNDI
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Solution Manager error "The termination type was: RABAX_STATE "

Hello All,
I was tasked with setting up security for our new SAP Solman Project Managment solution and ran into the following errors while testing.
BACKGROUND:
User type was application consultant and was prompted by business test users that this type of user should be allowed to create issues in issue management but not allowed to delete issues in issue management. Only Project Managers should. Removed the 06 delete authorization from CRM_ORD_PR auth_obj and instead of getting "you are not authorized" error message (what is expected) user is thrown to the below exception page:
===================================================
Error when processing your request
What has happened?
The URL http://##############.com:####/sap/bc/webdynpro/sap/dswp_ci_issue_management was not called due to an error.
Note
The following error text was processed in the system DM1 : An exception occurred
The error occurred on the application server sapdc004_DM1_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DELETE_CRM_ORDER of program CL_DSWP_CI_CRM_BUFFER=========CP
Method: DELETE_ISSUE of program CL_DSWP_CI_CRM_BUFFER=========CP
Method: DELETE_ISSUE of program CL_DSWP_CI_IM_MODEL_ASSIS4====CP
Method: DELETE_ISSUE of program /1BCWDY/E9JDCLCGWZ4H2NCZR2J4==CP
Method: IWCI_DSWP_CI_IM_MODEL~DELETE_ISSUE of program /1BCWDY/E9JDCLCGWZ4H2NCZR2J4==CP
Method: ON_DELETE_ISSUE of program /1BCWDY/E9JCYB3ZPWFCW42TLIUK==CP
Method: ON_DELETE_ISSUE of program /1BCWDY/E9JCYB3ZPWFCW42TLIUK==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/E9JCYB3ZPWFCW42TLIUK==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_COMPONENT===CP
Method: FIRE_EVENT of program CL_WDR_COMPONENT==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapdc004_DM1_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server sapdc004_DM1_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: TRAIN30 -l: E -s: DM1 -i: sapdc004_DM1_00 -w: 1 -d: 20111011 -t: 140639 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
==================================================
Ran ST22 and reviewed the following dump:
=====================================================
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_DSWP_CI_OBJECT
Date and Time 10/11/2011 14:06:39
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_DSWP_CI_OBJECT' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_DSWP_CI_CRM_BUFFER=========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
=================================================================
I did some searches on possible notes but none seemed to be appropriate and I would like to get as much information as possible before sending this over to the Basis team for resolution.

To solve this issue please make sure that
The version of your ABAP and JAVA stack are in your system as per
this note 1274287 : End-to-End Diagnostics SP18(EHP1)- SP19 - SP20
Best Regards
Jai wardhan

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

The Server application, source file, or item can't be found, or returned an unknown error. You may need to re install the server application

Hello All, can anybody help?
The Problem
We are running SharePoint 2013 and document sets that have an excel file and a PowerPoint presentation both in the document set folder and we have mapped this to a unc path
\\SP.companyname.com\@SSL\DavWWWRoot\Documents
Once a link(graph) is added from excel 2010 (Ctrl C) then go into PowerPoint 2010 Paste > paste special > paste link (As Microsoft Excel Chart Object) click ok the graph goes into the PowerPoint presentation.
The graph/Table is added but in Power point 2010. Perfect.
The problem is when we close excel and try and click on the graph(link) we get the following error “The Server application, source file, or item can’t be found, or returned an unknown error. You may need to reinstall the server
application”
If we right click then we get
The Linked file was unavailable and can’t be updated
Has anybody else experienced this issue?
We are running SharePoint 2013 and document sets that have the excel file and PowerPoint in and we have mapped this to a unc path
\\SP.companyname.com\@SSL\DavWWWRoot\Documents
I think that Office 2010 does not link or cannot link to a url which it see the unc path as?? It works in Office 2013 but we have Office 2010 as standard across the firm also I have tried SP1 and SP2 for Office 2010 but still
no joy
Is anybody else experiencing this issue? is there at least a work around?
Many thanks in Advance
Jake

Hi,
Usually this issue is caused by the Protected Mode in Adobe software, since it's not a Microsoft product, the information I can provide is quite limited. I suggest you contact the support of Adobe first, ask if they can provide any suggestion.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error occurred in deployment step 'Add Solution': Operation is not valid due to the current state of the object

hi,
when i was trying to deploy a SP solution from my vs 2012 solution. this error is displayed.
i tried many things like
1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
Add-SPSolution -LiteralPath d:\mywsp.wsp
Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
2) restart the timer services and do iisreset and reboot the server. etc .as mentioned in one of the the below blogs:
http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
but even after doing all these steps, the error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012 are installed.
just wanna share one note: there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
will this cause an issue in my wsp deployment ? i hope it wont, still asking...
can anyone help me how to resolve this error.because this is a show stopper for me for the last few days!
help is highly appreciated!

This issue cause because of feature activation failure while WSP deployment.
when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
Please restrict feature activation configuration, this will help you to troubleshoot this issue.
- Click on Project in WSP and press F4, it will open "Project Properties"
- set "Active deployment Configuration" - as "No Activation"
- you can activate this features in required sequence after deployment using Activate-SPFeature
If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
Thanks, ShankarSingh(MCP)

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item. I have changed the permissions to everyone and it doesn't work

Any suggestions please?

When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

Any suggestions please?

When I try to click and drag items to the desktop, I receive the following error: You can't open the application "Desktop" because it may be damaged or incomplete.

I am not able to edit my desktop, I receive the following error: You can’t open the application “Desktop” because it may be damaged or incomplete.
Also, I cannot rearrange folders, add folders, or move things out of my trash back to the desktop.

Try using another account and see if the problem persists.
Try booting into the Safe Mode and see if the problem persists.
Starting Up in the Safe Mode
What is Safe Mode

Solution? to Error 3200 - it may be the firewall!!!

Similar Messages

Maybe you are looking for