Solution to iCloud "cannot connect to the server" upgrade issue

I have just switched my iPhone 4s to a new carrier. (iOS 7.0.4)
Once the previous carrier (finally) unlocked its activation grip, all went well through restoring the phone. One issue remained:
iCloud wanted me to "agree to new terms of service" and would not allow me to do anything else with it. But when I tapped the button to "read the terms of service" the dialogue "Cannot connect to the server" popped up.
The solution turned out to be relatively painless:
Make sure you have backed up any Photo Streams that are present on your iPhone. (I use Aperture for this.)
At the bottom of the iCloud settings screen (Settings->iCloud) tap the "Delete Account" button. You will be warned that photos, documents, etc., will be deleted from your iPhone. As long as you are confident of your backups, tap "Delete" in the warning dialogue.
If you have "Find My iPhone" enabled, you will need to enter your Apple ID and password to turn it off. This is the only way to gain access to this setting that I could find.
Cold-boot your iPhone (Power + Home). I suppose you don't HAVE to do this, but seemed like A Good Thing.
Return to the iCloud settings screen and turn iCloud back on. Enter your Apple ID and password. Double-check that "Find My iPhone" is enabled, if desired.
You will be asked to allow iCloud to merge documents, contacts, and so on with the information on your iPhone. Do this as desired. (I do not yet use iCloud for most of this.) Your Photo Stream will eventually show up again by itself.
Hope this helps, and I'm all ears if there is an easier and potentially safer solution!
Matt

I have the same problem. Did you solve it already?

Similar Messages

  • I am getting the message that icloud cannot connect to the server

    Suddenly I am getting the message that iCloud cannot connect to the server.

    I have the same problem. Did you solve it already?

  • Ipad 2 keeps saying cannot connect to the server when i put in my facebook password

    All the new updates made my ipad 2 not work well and hesitate so I cleared off all content and reset all settings and then downloaded all current updates. I now get a message every time I open my ipad 2 that says Log into Facebook. I do that with the correct password under settings and then get the ERROR: "CANNOT CONNECT TO THE SERVER" All is good on both my iphone and Mac book Air
    I have tried:
    Deleted facebook app...but only goes to iCloud wont totally delete
    I have Reset Network settings
    I have Reset Location and Privacy or at least I try but I dont think anything is happening
    No change

    This is Apple's starting point/troubleshooting web site for iTunes Store connection issues. It has links to more advanced troublehooting as well.
    Can't connect to iTunes Store
    Have you tried rebooting your router - unplug it for about 30 seconds and then plug it in again - or temporarily disabling your firewall or anti virus software?
    Restart or reset the iPad?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Question re: cannot connect to the server to get mail

    I recently changed my yahoo email password and ever since my iphone 5 says that I cannot connect to the server. i went in settings and tried all sorts of typing and retyping of the new info with no success. any help?
    bjmcg45
    Preferences
    1
    2
    3
    4
    5
    6
    7
    8
    9
    0
    =
    Backspace
    Tab
    q
    w
    e
    r
    t
    y
    u
    i
    o
    p
    Return
    capslock
    a
    s
    d
    f
    g
    h
    j
    k
    l
    shift
    `
    z
    x
    c
    v
    b
    n
    m
    shift
    English
    alt
    alt
    Preferences

    Hello, and Welcome to the HP Support Community!
    How is the printer connected to your network?  Wirelessly, or LAN cable?  Did the setup routine work, and can you print to it?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Contribute Cannot Connect to the Server

    I am using a windows XP Pro computer, and have been using Contribute CS3 for over a year.  About 3 weeks ago, I started getting the message, when I tried to connect to our website, which is hosted by a 3rd party, I got the following message: Contribute Cannot connect to the server. Please check your connection information of contact your administrator.  Our connection type is SFTP.
    I could not connect on my work pc, so I installed Contribute CS4 on my home computer and could not connect either.  I also got our website developer to try and connect, and they could no longer connect as well.  As our website host has assured us that no changes have been made on their system, I did a fresh install of a trial Contribute CS4 on a brand new computer (XP Pro) and this time was successful at making a connection.
    If anyone has any ideas why the other 3 computers could not connect to the website, that would be appreciated.
    Thanks

    I'm having the very same issue. Very frustrating. Support had me uninstall and reinstall. That did not wor
    k, Then they had me uninstall and reinstall as a trial. That did not work. Very umimpressed with Adobe
    products and support.
    Anyone have a solution to this issue. I'm at the end of my rope.

  • Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

    I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
    Below is a summary of the issue:
    After selecting datasheet view beow error occurs:
        "Cannot connect to the server at this time.  You can continue working with this list, but some data may not be available."
        "Unable to retrieve all data."
        The item counts displays say 100 out of 14000 items.
    Exporting List to excel is giving only 2000 records out of 14000 records.
    Other Observations   -  
    This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
    Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
    I have checked the Alternate access mapping setting ,its fine.
    It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
    I checked below links also ,but doesn't seem to work in my case.
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

    I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
    I am sharing my finding.
    1. First install the
    KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
    2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
    These two steps resolved the issue in our environment. Hope it might help others as well.
    Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

  • Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

    Hi,
    Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
    This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
    BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
    Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
    Cheers!

    Hi E.SWARD ,
    My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
    Cannot connect to the server or database.
    I am getting the similar error , if i use Tabular analysis server instance .
    Subhash

  • My mini iPad will not connect to the internet. Getting a message that it cannot connect to the server.  What is this and how do I fix it?

    My mini iPad suddenly will not connect to the internet or retrieve my email.  I'm getting an error message that says "cannot connect to the server".  How do I fix this?

    Nevermind.  I found the answer from someone else's question.  Thank you.

  • The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

    Hi all
    I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
    any real value over the former versions.
    This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
    through motions from the Dashboard:
    On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
    'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
    Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
    Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
    'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
    server. Make sure that the computer is connected to the networkm and then try again
    If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

    Hi,
    Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
    Unable to Restore files or folders from a Client Backup
    http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
    Can't restore anything
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT1420 I am trying to rent a movie on my Apple TV and I keep getting the error message "Apple TV cannot connect to the server"  What can I do to correct this problem?

    Why does my Apple TV keep giving me the message "Apple TV cannot connect to the server" when I try and rent a movie to watch?

    Hello dprice3885,
    Thanks for using Apple Support Communities.
    Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/HT6106
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Have a nice day,
    Mario

  • Error message received submitting form via email - "Acrobat cannot connect to the server"

    Some of my users are unable to submit form data.  The forms are set up to be submitted via email and only a few of the users are effected.  They have installed the latest versions of both Acrobat and Adobe Reader.
    "Acrobat cannot connect to the server, but will automatically submit your form once the server is online.  You can check tracker for the status of this submission."
    "You have already submitted the data on this form and it is waiting to be sent.  Further changes are not allowed until the prior data is sent."
    I know that this question has been asked before, but there has not been a response.  This is very frustrating.
    Thanks for any help or sugesstions.

    I have this exact same error, but also have not yet found a workaround.
    Only sporatic users get the error, and I've been unable to duplicate it from my machine.  I am on Adobe Reader v 10.1.2.
    Actually I can get around the error if I were to downgrade to Adobe v9, but that is a bandaid fix - not really a secure answer.

  • My ipod is in recovery mode and my itunes cannot connect to the server what do i do?

    my ipod is in recovery mode and my itunes cannot connect to the server what do i do?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • BPC Excel: The system cannot connect to the server. There might be network

    Hi Guys,
    I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
    This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
    Has anyone experienced the same problem.
    your help will be greatly appreciated.

    Let me summarize your issue to see if I may help.  If I cannot, then you will need to work with SAP Support on the connection problem.
    - You have a single or multi-server setup?
    - Installed using BPC 5.1 SP3, (or 5.0.502) correct?
    - You can enter the BPC on the server, both via BPC Excel and BPC Admin?
    - When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
    - When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
    - When you are in the Connection Wizard, are you using a path or a Server designation?
    - Is the system on a single domain?
    - When you added users to the Admin Security profile, they were selected from a DOMAIN?
    - You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
    After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information?  If you haven't, just for simplification, I would attempt this process.
    You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
    Please let me know and maybe we can help.

  • InitCatalog:Cannot connect to the server

    Hello,
    We have installed BPC 7.0 in 2-server architecture.
    First server is VM - Windows 2003 32 bit, it contains
    - BPC
    - Reporting Services
    - Integration Services
    Second server is physical. Windows 2003 64 bit, it contains
    - SQL Server 2005
    - OLAP Server 2005
    We have installed also a separate client: admin and office tools.
    During opening Excel 2007 (provider Microsoft.ACE.OLEDB.12.0 is installed on first server) we got error:
    InitCatalog:Cannot connect to the server 'XXXXX'. The server is either not started or too busy.
    After clicking the OK button in the error message, I was further notified that Account dimension member cannot be downloaded and so on.
    It looks like similar problem as in this thread: InitCatalog:Cannot connect to the server 'XXXXX'.
    But it wasn;t solved.
    We got also the same error during processing cubes/dimensions from BPC Administrator.
    Can anybody help us solving this problem?
    Thanks in advance.

    Did you install ADOMD.NET and also the QFE into application server?
    ADOMD.Net-KB893091-v8.00.0991-x86.EXE
    you can download this from follow link:
    http://www.microsoft.com/downloads/details.aspx?familyid=790d631b-bff9-4f4a-b648-e9209e6ac8ad&displaylang=en
    You have to reboot the server after the installation of this QFE.
    Regards
    Sorin Radulescu

  • Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

    Hello,
    I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance.  I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server.  However when going thru ISA I receive the
    following Error.
    Power View  Cannot connect to the server due to a security issue.  The server may not have been able to match the host for Silverlight.  This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
    I've seen a couple references to this issue but not much.  This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that.  http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
    Any Ideas?  Thanks.
    Ryan

    Hi Ryan,
    Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

Maybe you are looking for