Solution To My Problem with Audio-less video

Ok, If you haven't read my thread from before, I will give you a brief summary of my problem. I was putting videos on my iPod, only one had audio. The reason was that iTunes did not support MPEG-1 MPEG-2 in conversions.
I was told by someone to get a converter to solve this problem and said they had used one that was quite nice but had to pay for it I believe, and so I have, here it is:
http://www.alfanet.it/squared5/mpegstreamclip.html
It's free and fairly straight forward, click-drag, export to MPEG4, click iPod button and done. Then just drag the newly converted file into iTunes Library. You're all set! Hopefully this will be of some use to some people.

I did some looking around on the Net and found this Software for conveting videos very handy/useful.

Similar Messages

Upgraded to mac os x maverick 10.9.1. Any suggestions on how to fix problems with audio and video bugs?

Having problems with video and audio delays for mac ox x maverick 10.9. Are there any ways to fix this?

I also noticed that if I wiggle my mouse around while I watch video streams the video&audio is significantly smoothier.

Problems with audio during video after itunes update

Recently updated to the new itunes and now there is no audio only during video playback. Tv shows and movies that previously played fine other than synchronization issues now have no audio. Help!

Hello Marcr
If you installed "dreamrecorder" on only one of your Mac laptops, you can use the other Mac to test your iSight to ensure it is functional. Try the suggestions in the " iSight: How to Troubleshoot" link there, too. Once you know that your External iSight is working correctly, you can concentrate on repairing the problem apparently caused by your "dreamrecorder" installation.
Third party applications can sometimes cause conflicts with iSight, especially if they are not installed or uninstalled properly.
Some applications provide "uninstallers" or specific instructions for all steps required to do a proper uninstall. If your "deinstalling" was accomplished by simply dragging such an application to the trash, some changes made when you installed the software may remain and be the cause of your problem. Check the Help or readme documentation for the "dreamrecorder" to be sure you uninstall correctly. Follow those instructions exactly.
You may need to reinstall the software to find the Help or readme info. If you do not want to reinstall to find the Help or readme files, or if they do not give you the help you need, you should be able to get the answers from the software developer's website. The developer may have FAQs, online documentation, or a support forum dedicated to his specific software. Many developers also offer technical support contact information to give you technical assistance by phone or email.
If none of those help you, the best suggestion I can offer for your "dreamrecorder" questions is a Google Search.
Jim

Having problems with audio and video when exporting to quicktime

I've exported a couple of keynote presentations to Quicktime and uploaded to youtube with no problems. I've now added a motion background in my intro, which looks great in keynote, but, it would appear that it causes problems. The mov file does play the animation, but, not as it was recorded, the audio then becomes out of sync and the advance on slides is all over the place with some not appearing. Is this a common problem? I am exporting at best quality and 1280 x 720, leaving all other settings as preset. I suspect that if I drop the background altogether it will work, but, it looks so great in keynote that'd be a shame. Any tips?

I'm confused with the aspect ratio when I crop them i know I have to lock the aspect but should I keep it on Original? Also i'm wondering when it comes to export them what size should I be placing if I want to print all sizes.
The crop aspect lock only comes into play while you are actively resizing the crop boundary. LR always works in a freehand manner, except that if the ratio is locked, adjusting the crop frame is allowed to alter its size and location and angle - but not its shape. If the ratio is not locked, you will be changing the crop shape freely if/when you drag the corner or edge handles around. The rest of the time, the lock makes no difference; and it is just as possible BTW to lock a random freehand aspect ratio, as it is to lock one of the standard preset ones.
If you are uploading an exported copy for printing, you could simply upload a JPG made at the original resolution (as cropped for composition and angle) - that is, unchecking the whole resizing section of the Export dialog - and give the printer instructions as to how large the various prints are to be. Or I suppose, you could resize to the largest of the sizes that you require, but you will then need to negotiate a pixels-per-inch "resolution" setting that will be appropriate - since, when resizing to a page size, this figure governs the pixel content of the file produced.
I would suggest that in the case of an export without resizing, where a generous quantity of pixels are included for the sorts of page sizes mentioned, you will likely not see any discernible printed benefit from setting the highest JPG quality setting for your export, but will be fine with around quality 6 to 8 - which brings the file sizes down significantly. Most often, printing services will presume that you have selected sRGB colourspace for your export, unless something different has been pre-agreed.

Synching audio problem with MPEG-4 video in QuickTime

Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
Leo

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

It's now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5 audio app missing lyrics

It’s now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5.
I recently updated to ios 5.1 but nothing has been done to rectify the audio app problems ie lyrics no longer shown,
I am extremely disappointed and angrywith those responsible for the iOS 5 update, in regard to the way it hasaffected the music app in my iPad.
I also own an iPhone 4, am an avid Apple fan, and up until now have beenextremely pleased with the devices, and have sung their praises to friends andassociates.
I am a professional musician, and purchased an iPad primarily to use with theperformance of my music.
The changes made to the music app affected my performances over the weekendextremely adversely – limiting my repertoire and causing confusion and delays.
I have spent many hours talking withApple helpline assistants (who, incidentally have been very good and have triedto help), and I have also spent a lot of time on this letter.
I greatly regret updating to iOS 5.
There are two major problems with the music app.
1. Lyrics no longer displayed
2. Layout, and appearance and consequently performance have seriouslyregressed.
I have a repertoire of around 500 song backing tracks, organised into about 20playlists, half of which featured lyrics / chords that I have spent monthsrecently entering into iTunes so that they could be used on my iPad.
These were working fine up until the update - now they are gone.
Previously, the app featured large icons for playlist, artists, songs etc. atbottom of page: Now there are small, grey, indistinct barely legible buttons.
Previously, when playlist icon was selected - all the playlists were listedclearly in order on the left hand side in black on white (as in iTunes).
Now they are scattered across the whole page in large squares (displayingnothing if there is no album art).
The identifying wording below eachsquare is now small, grey, indistinct & barely legible.
Previously, when a playlist was selected - the songs were displayed in adescending list in black & white: now they appear as small, grey indistinct & barely legible.
Previously, when a song was selected - it appeared filling the page, and withaudio controls clearly positioned at top of screen. One tap would bring uplyrics.
Now audio controls appear at top once again small, grey, indistinct &barely legible.
A small square representsalbum art which if tapped fills page. A further tap fails to bring up lyrics.
Don Wilson

Lyrics aren't supported in the Music app on iOS 5 on the iPad. These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem with the imported video clips

Hi! I'm very new to Premiere Pro, so please don't scold me :)
I have a video file (.AVI) that I want to remove the audio from, and insert a new audio track.
Here's my problem: When I import the AVI file into Premiere, and double-click it to preview it, it is really glitchy. The video is 1 minute long. During ~5 seconds in the very beginning, the whole video's "video" track is played, extremely speeded up (It plays through it all). The rest of the video consists of a freezed frame, and the audio is played in normal pace.
I do not know which codec the AVI-file is encoded with, is this relevant?
When I restarted Premiere the first time, it told me that it had to download codecs. I pressed OK and the codecs was downloaded and installed okay, but the problem remains.
I copied the .AVI-file directly from my camera (Canon IXUS 700 I believe).
When I play the original AVI file with VLC, everything runs perfectly with audio and video.
I'm totally clueless, anyone have a clue how I can solve this?
Any help at all appreciated, thanks in advance!

>I do not know which codec the AVI-file is encoded with, is this relevant?
Very relevant. Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Problems with audio programs after update to Maverics

After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

HT201272 I spend a considerable amount of time in Asia and am finding the ability to download previous purchases now shown on my iCloud account. Music appears fine and most movies are OK but I have problems with all music videos included with album purch

I am finding the ability to download previous purchases now shown on my iCloud account to be difficult. Music appears fine and most movies are OK but I have problems with all music videos included with album purchases. Any ideas?

Phillip_dc wrote:
Firstly, I purchased my first iPhone a few years ago, since then there have been a lot of apps released, a lot which I downloaded for free, tried and deleted from both my phone and my iTune 'Apps' Panel. What bothers me is when I do get a new iOS device, iPad and/or iPhone 5, and I don't want to just copy the back-up of my current iOS device to the new one, then to get the apps I want I will have to scroll through countless useless 'trash' applications in my purchase history to 'cloud download' the ones I want.
Just sync the apps you want from your computer. You don't need to redownload them directly on the iPhone Purchased list.
Will Apple be employing such a feature, a 'permanently delete/un-purchase' feature?
Dunno.
Send suggestions here -> http://www.apple.com/feedback/

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Solution To My Problem with Audio-less video

Similar Messages

Maybe you are looking for