SOLUTION TO NEVER-ENDING "CONNECTING" IN MAIL!!!!
SOLUTION TO NEVER-ENDING "CONNECTING" IN MAIL!
I just got off the phone with Apple tech support. You need to delete all your mail accounts (write down mail settings if you won't remember them).
Then you need to go under Settings- General- Reset- Reset Network Settings. When the phone restarts, just add the mail accounts one by one, and you're good to go. Keep in mind that a network settings reset will delete wi-fi settings.
Hey Matt,
You can just hold down the Home button for about 6 seconds to quit the Mail application, then launch it again.
http://support.apple.com/kb/TS2032
Jason
Similar Messages
-
My FaceTime doesn't work... I would call a person, they would accept, and then I would be stuck in a never ending "connecting".. And this problem has been according with not just my ipad, but with other people's iDevices that I know.
-My wifi connection is running strong
-All the devices run the same version of iOSTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
The never ending Connecting to ISP mesage-but never happens
For the last week I have had no problems with my Extreme base station which connects through Dial up and is extendeded by a Airport Express station to provide coverage to several of my families laptops. Today - I asked airport to connect like always (I dont have it configured for automatic dial) and while it began dialing like normal got stuck on the message connecting to ISP. Needless to say I have tried everything including resetting it, (which by the way is the only way I can stop the connecting to ISP message on Internet Connect) I have disconnected and turning every computer off as well as the express station and physically I reset the base station via paper clip and used the Airport assistant to set the base station up like new - but no dice. Everytime it dials (and I have actually picked up the phone to listen) it makes the call but when the message Connecting to ISP is displayed the phone goes silent and the computer is stuck displaying the scrolling message that it is connecting to the ISP. But NADA! Do you think my ISP or phone company changed something??? Could it be new firmare or airport software taking effect? Man if you have any ideas - please help.
Well I got ahold of (AppleCare) - more specifically - Sean in Austin - a product specialist who took me through - tons of stuff annnnd - NADA - had to escalate it to engineering who probably won't be able to answer until Thursday. Interestingly we were able to hook up to a Apple Server without a problem but my ISP still gives the never ending "Connecting to ISP" message - later I called my ISP and they said if your able to connect the computer to there ISP but not the router - then it isnt there problem - its Apple.
STUCK till Thursday without my EXTREME! REAK
Tom -
Hi,
When I connect my iPhone 3G, the synching process in iTunes 8.02 gets stuck on Synching Mail Accounts - and never ends. I even let the synching run all night, but the process was still going in the morning.
Does anyone have any ideas on how to fix this? Thanks.Perhaps the difference is that the account you currently use is not an IMAP account but a POP account, and it is not configured to save messages on the server after retrieval. MobileMe and AOL mail are IMAP mail accounts.
If your present email provider supports IMAP, then change your mail account to use IMAP instead of POP. This will make it easy to keep both computers consistent with email. -
hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?
In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
SOLUTION for the never ending reboot loop when charging
I used my iPad until the battery was completely flat, then when I went to charge it, it got stuck in the never ending reboot loop where it shows the Apple logo for about 30 seconds, then shows the home screen for a split second before shutting down and repeating the whole process again and again.
So here's what you need to do to fix this problem without having to restore or plug into iTunes.
1. Plug in the charger
2. When the Apple logo appears, unplug the charger
3. As soon as you see the home screen appear, plug the charger back in. You need to do this quickly as the home screen only shows for a split second
4. The loading wheel should appear and shut down the iPad
5. Leave the iPad for a good 30mins or so just to get some battery life into before you start using it again.
And that's it!Figured I'd start recording the errors I get in the Installer Log:
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFileError 0: Unknown error: 0 - ./Instrument Library/Sampler/Sampler Files/Grand Piano/054F#2KM56M.wav
localhost : Install failed: some files for GarageBandinstrumentsTiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iDVDThemes_Tiger may not have been written correctly.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWeb_App may not have been written correctly.
localhost : Install failed: Error encountered while writing receipt for iWebtempja.
localhost : BomFatalError - cpio read error: bad file format
localhost : Install failed: Some files for iWork Trial may not have been written correctly. -
All the sudden can't connect to mail server
This morning I stopped receiving email. Mail says it can't connect and that the connection timed out. I use IMAP with SSL (port 993). I don't know of anything I could have changed on the MacBook to cause this. As well, my iPhone can't connect either (same settings as Mail). It gave a connection error once and since then doesn't give errors but never pulls in new mail. I can ping the mail server and telnet in via port 993. I'm not sure what else to look at. Mail settings haven't changed that I can see. Hosting provider says there aren't any issues on their end. Any suggestions?
Do you have Mail properly configured for their servers? I know you said you use SSL, but does the ISP use it, and if they do are you using their default port? Verify your server setup by opening Mail preferences, select Accounts, click on Account Information tab. From the server drop down menu select Edit. Check that your server is correctly configured and the right security option selected. If you have multiple server entires delete all but the one you use for your mail account.
You can also try removing the /Home/Library/Preferences/com.apple.mail.plist file in case it's become corrupted.
It also can't hurt to do the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Download and install the freeware AppleJack 1.5 - VersionTracker or MacUpdate - and carefully read its instructions. Then run its full suite of maintenance and repair routines. -
N8 Email - Unable to connect to mail service serve...
I have my Nokia N8 for a good few months. Email stop sync-ing so deleted my 1 and only email account (Hotmail) and now I can not get any email back.
I have played with internet settings, rebooted my phone but still nothing.
Basically, this is what happens:
Got to set up email
Some text comes up about what mail can do and you have the option of start of exit
Press start, and it says preparing for set up, then it comes up with Unable to connect to mail service server. try again later.
The next options I have are to enter email and password or cancel.
If I enter email and password it comes up with an option to click on mail for exchange and I have to start entering user name, domain, etc or I can exit.
So, can anyone help me restore the email function. When I got the phone you had an option of hotmail, yahoo, etc etc. And that is what I want back.
Also I should mention, I don't have any options around pushing or pulling email as it never gets that far into setting up email.
I live in the UK, so was wondering if I should just take it into my local carphone warehouse who deal with Nokia support and demand it gets repaired? It's part of what I paid for so they should repair/replace for me?
Any advice would be good,
Thanks
Vicki
Solved!
Go to Solution.For the answer of both how and why please refer to the post by Abi99 earlier this week:
http://discussions.nokia.com/t5/Symbian-Devices/quot-Unable-to-connect-to-mail-service-server-quot-o...
Please click the star below that post to draw attention to the expired Nokia certificate, which Microsoft Mobile Oy must renew to solve the problem! - Also use the false username and false password trick, if it is a first time mail setup on a freshly reset Symbian phone, to avoid any Nokia Messaging clutter, and then input server details manually.
EDIT: The expired certificate was renewed is now valid until 2015-07-10
Hans -
WRT 160NL firmware upgrade never end!
Hi there,
I'm trying to upgrade the firmware from version 1.00.01 B15 to 1.00.01 17 (the only one available on linksys website). It's not allowed to turn off power or reset it. However, the upgrade progress stopped in 98% and never ended so far. Should I wait for longer time (another day)? Or I can just reset/power off it?
Attached a screen snapshot for reference.
Thanks.
Solved!
Go to Solution.Firmware upgrade process should be complete....
Try the following steps...Press and hold the reset button for 60 seconds...Release the reset button and Unplug
the power cable from your router, after 30 seconds re-connect the power cable...
Now, also do the browser settings on the computer...Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial
a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Now try to upgrade your router's firmware...it should work !!! -
Loading plsql_proxy.jar takes so long..never ends
Hello people,
I´m deploying a proxy cliente using command,
jpub -u SCOTT/SCOTT -sysuser SCOTT/SCOTT -proxywsdl=any_wsdl -endpoint=any
then the executing process stay in Load plsql_proxy.jar for a long time. it looks like never ends.
plsql_wrapper.sql
plsql_dropper.sql
plsql_grant.sql
plsql_revoke.sql
Executing plsql_dropper.sql
Executing plsql_wrapper.sql
loading sqlj/lib/dbwsclient.jar (about 5 minutes)...
Loading plsql_proxy.jar......................
the execution process looks like stopped at this here and doesn´t throw any exception.
I´ll be grateful the soon answer.
Rodius
anybody knows how long takes the proxy client generation process?I have this issue also, with images from my D70 (~6 megapixels) ... no solution, except that when it happens, quitting and re-launching Aperture seems to clear it up for a while, at least until it happens again.
Given that you have almost twice the RAM and four times the CPU cores that I have, I suspect this is a software issue, and not one of insufficient hardware resources. :-) -
Initial Time Machine Backup never ends
Hi all folks,
I try to backup my PB12 Disc (120 GB) to a external 500 GB Disc, connected via FW400, but the backup never ends, I think.
The backup starts with 100MB/min but after 20h (80GB are store to a external Disc) it slow down to 1MB/min.
With the "Activity Monitor" I see only some disc activities and a "mds" and "mdworker" process use some cpu time only (more than 10%).
Where can I get some detail information, a log file, about the Time Machine activity from.
Thanks for any help,
LutzHi all folks,
the initial Backup ends after 2 days (nice to to see, :-(),
but on the boot volume I can go the time walk only.
I split my disc into two partitions, sorry.
Bye, Lutz
p.s.
With CCC I spend 4-6 hours to back up my disks only (100GB). -
An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode). The ipad is now disabled,has never been connected to a computer . Can it be opened without loosing what is on it?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Suddenly never ending pinwheel and slower than usual
My macbook pro suddenly started to get slow and gave me a never ending pinwheel while only having Safari running. The mouse was working but no response when clicking. Only way to restart computer was by holding down the Start button. Restarted and this time the computer hang up when I tried to Log in (while writing Login and password). I mangaged to Log in two more times but I got the pinwheel again when browsing internet. Finally I managed to make it to Support/Community.. any idea what's wrong?
Thanks in advance (: !Print out these instructions and info at the links provided as most require you to be offline.
Do a SMC and PRAM reset first, then a Hardware Test
https://support.apple.com/kb/ht3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/ht1509
If the hardware test gives any errors, note them here.
Check the time and date on your computer to make sure it's correct.
If your still having slowdowns, pull the power plug on both the router and the modem, connect the modem and wait a bit then connect the router. Reboot your computer and it should connect automatically to your wifi. See if your slowdowns only occur if connecteted to the WiFI or not, that way it can be determined if it's a internet issue or not.
(If your still having slowdowns, it might be because you have a Open Network on your router and someone is leaching off of it. WPA 2 with AES is the only secure wifi standard))
You can test your internet connection speed here, see if it matches what your paying for.
http://www.speedtest.net/
IF your computer still has issues then:
Fish out the 10.6.x disks that came with your computer (grey) or the 10.6.3 Snow Leopard retail disk, stick it in the computer and reboot holding the c key.
(Make sure the disks are clean on the bottom, wipe with a very soft cloth and a tiny bit of rubbing alcohol to clean and don't place the disk on a harsh surface that can damage the bottom.)
Second screen in, under the Utilities menu is Disk Utility, select your drive on the left and click First Aid, Repair Disk (please write down any errors this gives and tell us) and Repair Permissions (the results there you can ignore)
Do not erase or reformat the drive.
Reboot and see if your computer works, if not repeat the c boot off the installer disk again and this time skip Disk Utility and install OS X.
It will install on top of your 10.6.8 installed version (only, not your programs or files), which when finished you reboot and immediately Software Update to 10.6.8
This should take care of anything wrong with OS X itself.
Now to clean the caches of the user and other checks.
Download the free OnyX for 10.6 and run ALL the maintenance and cleaning aspects and reboot at the end of the tasks (you can cancel in between reboots) but reboot at the end of using Onyx)
Do all the checks it asks when it starts up and note any errors here they report.
Also under the Verify Tab is a Preference (plist) check, check the "show only corrupt files" and run that, make a note of all and any corrupt plist files.
http://www.titanium.free.fr/
Plist files are preference settings files that sometimes get corrupted and may be the cause of your problems.
If you have some, then you can look in your Users/Library/Preferences folder for them and Trash them and reboot the machine and load the program responsible, the plist file gets rebuilt without your preferences which you reset.
The next thing to check would be your web browser plug-ins here
https://www.mozilla.org/en-US/plugincheck/
For Flash in Safari check here again as it's more accurate
http://flashbuilder.eu/flash-player-version.html
Download Flash and install if it's not this version (latest)
http://get.adobe.com/flashplayer/
Silverlight here
https://www.microsoft.com/getsilverlight/get-started/install/default.aspx
Finally install and run ClamXAv on your drive, this will look for known malware that might have gotten accidentally installed.
http://www.clamxav.com/
Since OS X was reinstalled, along with bundled programs like Safari, this should only leave applications and users as a source of any infection.
If your stil having issues, then create a new user and transfer your files over and when up on the new user, delete it. -
hello, i have the problem that my itunes match never ends the sync.
It runs always in a loop
Itunes is in german
I found a lot of solutions with the alt key, deactivate and activate Itunes Match and other, but nothing help.
have anyone a idea what i can do??
UdoI ended up calling Apple, and they had me completely reformat the iPod. This seemed to fix the problem.
-
hello,
my scene only contains 2 images.
the 1st: a layer with the script "stop;", and,on another, a
movie clip with the scrip:
onClipEvent(load){
Calculate approximate kbps after test swf loads
function getkbps(startTime,sizeInBytes) {
elapsedTimeMS = getTimer() - startTime; // time elapsed
since start loading swf
elapsedTime = elapsedTimeMS/1000; //convert to seconds
sizeInBits = sizeInBytes * 8; // convert Bytes to bits,
sizeInKBits = sizeInBits/1024; // convert bits to kbits
kbps = (sizeInKBits/elapsedTime) * 0.93 ; // IP packet
header overhead around 7%
return Math.floor(kbps); // return user friendly number
Load test.swf with a unique time to work around browser
caching.
Browser will always load a new copy of SWF because url is
different each time.
now = new Date(); // create date object
nocacheStr = "?" + now.getTime();
this.loadMovie("test.swf"/*+ nocacheStr*/);
onClipEvent(enterFrame){
// do not execute code until SWF begins to load
if(this._url != _root._url){
if(typeof start == "undefined") {start = getTimer();} // set
start time once
if(this.getBytesLoaded() < this.getBytesTotal()){ /* not
yet loaded*/}
if(this.getBytesLoaded() == this.getBytesTotal()){ // swf
loaded call getkbps()
_level0.bandwith = getkbps(start,this.getBytesTotal());
_root.gotoAndStop(2);
in th second image the only script is:
//Ouvre une connexion locale qui vous permet de lire les
fichiers vidéo (FLV) depuis une adresse HTTP ou depuis un
système de fichiers local.
// on crée l'objet de connexion (objet NetConnection)
maConnexion = new NetConnection();
// Connexion à la source de donnée
// quand il s'agit de charger une video externe sans utiliser
FlashComm
// il faut transmettre le paramètre null à la
méthode connect
//on se connecte
maConnexion.connect(null);
//on crée un objet NetStrean pour pouvoir utiliser les
méthodes et prpopriétés permettant de lire des
vidéos en local ou depuis une adressse http
// Création d'une occurence de l'objet NetStream
monFluxVideo = new NetStream(maConnexion);
// attachement du flux video à une occurence de l'objet
Video
ici.ecran.attachVideo(monFluxVideo);
//on définis le nombre d'images par secondes:
fps=12;
function essai(){
if (bandwith != Infinity) {
temps_chargement = (monFluxVideo.bytesTotal / bandwith) -
(monFluxVideo.bytesTotal/fps);
if (temps_chargement>=0){
monFluxVideo.setBufferTime(temps_chargement);
}else{
monFluxVideo.setBufferTime(20);
essai();
// lancement de la lecture
monFluxVideo.play("eveque_moins_oiseaux.flv");
//permet de lisser la video lorsqu'elle est
redimensionnée
monFluxVideo.smoothing;
//bouton play
bt_joue.onRelease = function() {
monFluxVideo.play("eveque_moins_oiseaux.flv");
//bouton pause
bt_pause.onRelease = function() {
monFluxVideo.pause();
//bouton stop
bt_stop.onRelease = function() {
monFluxVideo.pause();
monFluxVideo.seek(0);
//bouton avance
bt_avance.onRelease = function() {
monFluxVideo.seek(monFluxVideo.time+10);
//bouton recule
bt_recule.onRelease = function() {
monFluxVideo.seek(monFluxVideo.time+10);
//----son
//ici.ecran.attachAudio(monFluxVideo);
var monson = new Sound(ecran);
var i = 100;
moins.onPress = function() {
monson.setVolume(i -= 5);
son = i add " %";
plus.onPress = function() {
son = i add " %";
if (i>=100) {
i = 100;
} else {
monson.setVolume(i += 5);
//fonction de démarrage en fonction de ce qui est
chargé
//Spécifie la durée de la mise en mémoire
tampon des données avant le démarrage de l'affichage du
flux vidéo.
//monFluxVideo.setBufferTime(4000);
monFluxVideo.seek(info);
function verif() {
// info prend pour valeur la position dans le temps en
seconde (tete de lecture)
info = Math.round(monFluxVideo.time) add " sec";
setInterval(verif, 100);
function charg() {
pourcentage = "Chargement : " add
Math.round((monFluxVideo.bytesLoaded/monFluxVideo.bytesTotal)*100)
add " %";
setInterval(charg, 100);
When i play the scene the loop never ends. even with the
"gotoAndStop(2)"...
Please help me...You should read up on Garage Band, I figured it out in 2 minutes and I don't really use that program.
You need to create a new software instrument and then use a midi keyboard or the software one provided. Hit record and hit your note, holding it down as long as you want.
Andy
Maybe you are looking for
-
How to enter a Absence on a Non- working day?
Hi All, In our company we dont have exact work schedule rules. So we have the need to be able to enter a Absence on a Non- working day for Salaried employees. when i try to enter an absencen on-working day, the number of hours are zeroed out. What co
-
Connecting MBA 11" to Vizio VX20L
I have a Macbook Air 11" 2011, the KANEX Mini Display Port to HDMI Cable, and a Vizio VX20L HDTV. The MBA detects the TV (the screen flickers blue, but then shortly returns to the regular screen) but the TV does not (displays a NO SIGNAL! on screen).
-
Add symbol does not appear in contacts
The add symbol has gone from my contacts, does anyone know how to get this back?
-
Detail VO executeQuery question
Hi I'm unclear on when executeQuery is fired for a detail ViewObject. In my project I've overridden executeQuery() in my detail ViewObject and expect it to fire each time there is a parent VO RowSet navigation event. I find this is not the case. The
-
Clarity (camera raw effect) in after effects
DOes anyone know how to create the clarity effect that you get with camera raw but within after effects. The kind if thing I'm looking for is see. Within films like 300 and tv shows like Spartacus blood and sand. Now I know this might have been achie