SOLUTION to recon 3d (and probably more) on win 8.1 with clean boot

Hi there I manage to install my recon3d fatal1tyv pro that I was having issues with.
ISSUE: installshield hanged at 0%. result, install did'nt work.
Tried: admin rights, install from TEMP, remove all temps, disable and remove video card, disable integrated audio, disable AV., only one HDD loaded, etc. nothing worked.
I ran Safe mode and was able to install the extra software, which didn't on regular boot, I had to enable msinstall during netwrok safe boot to do this, so I knew what's wrong at that moment.
SERVICE CONFLICT.
this is the major trouble for many of us, usally apps like:
ADOBE, AUTODESK, z87 fatal1ty Killer MB soft, steam, origin, logitech joystick and mouse g500 soft, ms 360 controller driver, wacom cintiq tablet software, nvidia gforce, intel rapid storage and boot, teamviewer... Use services at boot. Creative has a compatibility issue with one of this, probably is trying to load a loaded service or a conflict between system files loaded. that's why a clean install solves any issue, as it only loading minimal ms services.
SOLUTION
run a clean boot, this is a mix of safe mode with regular boot, like a Clean install boot.
WIN 8 /8.1 use search: msconfig, general, diagnostic boot select system and original boot, startup items must be unchecked, reboot, and I was able to install everything.
don't forget after to run again msconfig and select normal boot.
there are other ways to run a clean boot, for example msconfig, services, check hide ms services, and then disable all, this will load only ms services (that you hide and that is why you did not disable them), reboot and install. don't know if you have to run msconfig again to enable services as I use the other method.
hope this helps anyone with problems installing their sound card

Thanks for this reply, RBoyde, but........
... as my orignal message suggested, I have hardly a clue what you are saying and the link doesn't help me understand any better either (as it doesn't seem to help with how to do something with an existing Registry key).
To be speciific:
1. what script do I write?
2. where do I save it so it works for all users at logon AND on switching users?
3. how do I "run it as a logon script via group policy"????
Perghaps I need to add that this is a single, standalone, home PC, with 2 users, running Win 8.1 Core/Basic. Also, I cannot find the Group Policy Editor on the PC; when I type either 'gpedit' or 'gpedit.msc' into Run, I get a message saying that the
file canot be found on the PC. This when logged on as user with administrator powers. It is not found either from a Command prompt. And there does not seem to be a GP Snap-in available via the MM Console.
Please clarify for me what looks to be a helpful response - for I am just a 'bear of little brain' (as per Winnie the Pooh).
Neil

Similar Messages

My eBay pages don't work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more. I can't list an item as the submit button has disappeared. It all works fine on IE.

My eBay pages don’t work properly. There are parts missing. The symbols on the My eBay page have gone. The £ paid sign, checkout, feedback, and probably more.
I can’t list an item, as the submit button has disappeared.
It all works fine on IE. I’ve uninstalled and reinstalled Firefox, but still the same.
How can I regain my missing bits please.
Thanks

Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
See http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

All/any computers i have had for 10 years are, even though stand alone..forced to be a workstation on an unknown domain whose people set global policy through mmc and every exploit and probably more..they set global policy always know my passwords

i could go on forever and the only way i can be helped is by remote and seeing irregularities for yourself or to physically come to where i am. denial of service, controlling which updates, controlling all services, devices..many unsigned drivers..use of
many "legacy" parts, technology in computers..changing of most file extdoing...anyone out there who could help? thanks
ensions..and icons, control of colours themes ..of cd disk..won't let me set up a printer always know any passwords including "setup" where i will change things only to have them change back..they control of course task manager mmc and anticipate
with all kinds of rules what i can or can't do..enough .said..i have been a teacher at college level a broker with CIBC a boat captain and owned a number of businesses and I assure you these people or organization have cost me 100/000 of frustration not to
mention over $200,000 in cash..they often crash my computers when i get close to new information on how/what they are i am rarely able to get any advice or help mainly because so many "experts" don't believe it is possible..they use every
kind of network protocol, many at once plus remote so loop ras, unp and tunnelling etc..all software or security and spyware virus programs assume that if your computer shows as being on a network/domain then all activitied by the admin of that domain are
ok..sso no protection..this also has happened tp hundreds of computers..o.s doesn't matter or linux or apple xp, vista windows 7 etc

That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

My MacBook Pro is really hot and the fan is on constantly. It didn't use to do this, does anyone know why this is happening? I have a very short battery life, so I have to keep it plugged in probably more than I should.

My MacBook Pro is really hot and the fan is on constantly. It didn't use to do this, does anyone know why this is happening? I have a very short battery life, so I have to keep it plugged in probably more than I should.

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

My iPad free space was shrinking. Previously I did an iOS upgrade and got more free space so I tried a restore and the same thing happened. Do I have a setting wrong?

My iPad free space was shrinking. Previously I did an iOS upgrade and got more free space so I tried a restore and the same thing happened. Do I have a setting wrong? There was a significant change from 4.3 GB to now 10.2 GB. I still have all the same apps, photos, songs, etc. So what's up? Why does my space not recover after I delete things?

This is what I did to resolve the issue. First I did a simple Reset (Home and on/off until the Apple logo appears) and it didn't help. Then I did a Restore with a reload from the backup and that also accomplished nothing. Then, I did a Restore as new with NO reload from backup and that resolved my issue.
IF you choose to try the same thing, here are some cautions. Make absolutely certain that all apps, music, movies, etc. are present in the iTunes library. Also make absolutely certain that all "regular" data, such as pdf files, Word files, etc. are present and accessible somewhere on the computer's hard drive. Be aware that you will probably lose all game data (scores, etc.). I did not investigate a solution for that because I don't play many games and I really don't care about the game history. Finally, be forewarned that it is a bit tedius recreating all your folders and putting each app where you want it.

I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

I have Windows 8 and Itunes 11.1.2. When I click on the Itunes desktop shortcut, Itunes won't open. I just the icon go to the taskbar and nothing more. Please help.

Delete the shortcut and make a new one. The 'real' application will probably be fine if you launch it from the Start/Programs menu.

Please recommend solutions for Cache Connect and ?

---> Solution I
2 servers create Cache Connect to RDBMS
---> Solution II
1 server create Cache Connect to RDBMS and create active standby pair with another server

Hi,
If you only need READONLY caching in TimesTen and all updates will be made in Oracle then you have two main options:
Multiple READONLY Caches
For this you have one or more separate TimesTen caches each with a READONLY cache group defined against the oracle DBMS. Each cache can cache different tables/data or they can can cache the same tables/data as required.
This architecture is very flexible (adding or removing TimesTen servers is very simple) and very scalable. It also provides very good HA; if one cache is down applications can just access a different cache.
However, due to the asynchronous, time based nature of the refresh from Oracle to Timesten at any moment in times the data in all the caches may not be 100% consistent with each other or Oracle.
By this I mean the following:
- Assume that you have 2 (or more) READONLY caches caching the same data from Oracle, with an AUTOREFRESH interval of T1
- At some time, T2, you update, in Oracle, one of the rows cached by the caches.
- At some later time, T3, you query the updated row via both caches
If (T3 - T2) < T1 then the values returned by your query may differ between the caches (depending on where exactly they are in the autorefresh interval when the update is done).
Active/Standby pair using 2-SAFE replication with READONLY cache group and optional read-only subscribers
With this architecture you define a TimesTen Active/Standby replicated pair using 2-safe replication and containing the READONLY cache group. 'Scale out' is accomplished in one of three ways:
1. Adding further A/S pairs with a READONLY cache group
2. Adding read-only subscriber datastores to the original A/S pair
3. A mixture of (1) and (2)
The main advantages of this architecture are as follows:
1. When 2-Safe is used within the A/S pair, queries to either cache will always return consistent results (i.e. the consistency issue that I described for the first scenario does not exist in this configuration). However, threr can still be inconsitencies in results between the A/S pair and any readonly subscribers (since the replication to them is asynchronous) but given the high performance of TimesTen replication the latency between a change appearing at the A/S pair and the readonly subscribers will typically be a few ms rather than potentially several seconds for the multiple-cache scenario.
2. The loading on the central Oracle DBMS arising from AuTOREFRESH processing is reduced compared to the multiple-cache scenario. The difference in loading between this solution and the multiple cache solution will be larger as more TT servers are deployed.
It should be noted that the operational management of this solution is a little more complex than for the first scenario since the A/S pair must be monitored and a 'failover' trigerred if there is some fauilure within the pair.
Hope that helps a little.
Chris

Which plan is what I need and nothing more?

I want to use skype to make calls to land line/mobile numbers in the United States of America. Id like to be able receive calls as well. I don't really care about text msgs as that can be handled in other programs, but if its cheap ill do that thru skype as well.
Should I get a plan? If so which gets me what I need and nothing more?
Should I get credit?

sbroscious wrote:
I want to use skype to make calls to land line/mobile numbers in the United States of America. Id like to be able receive calls as well. I don't really care about text msgs as that can be handled in other programs, but if its cheap ill do that thru skype as well.
Should I get a plan? If so which gets me what I need and nothing more?
Should I get credit?
First thing.... sign up for the Unlimited USA & Canada subscription. You can get it for US$ 2.99/month, or a year at a time with a 15% discount. Once you have the subscription, you can purchase an Online Number in the USA. There are numbers available in most US states and area codes. The numbers cost US$ 18/3 months or US$ 60/year, but you get a 50% discount on the online number if you already have a subscription.
With this, you essentially get a Skype account that can receive calls with a US telephone number, and make unlimited calls (subject to Skype's fair-use policy) to landline and mobile phones in the USA and Canada, for around US$ 60/year - or about US$ 5/month. If you have any need to send SMS messages, you can do that using Skype credit. You won't be able to receive SMS messages with Skype.
Beyond all that, you'd only need to keep Skype Credit on your account if you wanted to make calls to countries other than the USA and Canada with this approach. Keep in mind you can use a credit card or PayPal to purchase the subscription and online number, or you can purchase Skype Credit first and then use the credit for the subscription and online number.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

On ebay, firefox will not respond to "shipping and payment" and "read more" links. no problem using IE.

when on Ebay and looking at an auction, the links for 'shipping and payment' and 'read more' (in the item specifics block) do not respond. all other links on auction pages work. and they also work using IE. this is the only website that i have this problem with.
i did a refresh of Firefox, but the problem persists.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Lot of time in support message and send more than 500 emails...

Hi experts,
I have a BIG problem, this weekend i update to EHP1 my solution manager (without problems).
Now, i want sent a support message with the workcenter and spend more than 15minutes and after, when the message is sent, appear more than 500emails... why???? What happend???
Thanks in advance,
Regards,

The content of the pdf is the standar:
The support message: <number>
description: test
el status of the support message is: <status>
And i receive more than 500 emails, with the same pdf...
Regards,

I have ipad 2 16gb wifi, recently it starts autorestart and crashs out of games and apps, more than 20 times aday- tried to restore, updated to the latest 7.0.4 but still the same problem

i have ipad 2 16gb wifi, since 3 months it started to autorestart and crash out of games and apps, more than 20 times aday- tried to restore-install as new ipad- soft and hard reset-, updated to the latest 7.0.4 but still the same problem
plz help....

Vinayaka-
After all you've tried, Dah*veed is probably right about needing warranty assistance.
But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
Try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect to your WiFi.
Fred

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

I can't download from app store apps. if i try then open account and ask me shange payment type because there is a billing problem with a previous purchase. I download one game 0.99 and nothing more! help me. How can i contact with apple?

I can't download from app store apps. if i try then open account and ask me shange payment type because there is a billing problem with a previous purchase. I download one game 0.99 and nothing more! help me. How can i contact with apple?

Click here and ask the iTunes Store staff for assistance.
(102938)

Is there a BAPI that gives the status information (and possibly more) of a

Hi All,
We are using an external document image system where we scan and code vendor invoices. They are send to our SAP system via a BAPI.
We want to update the status of the invoice in the document image system from the status in the SAP system, so whether it is still open or has been paid and cleared. Is there a BAPI that gives the status information (and possibly more) of a specific vendor open item?
Regards,
Gerrit

Are you sure about that? Several highly regarded, widely downloaded apps, e.g., eReader, have an option to hide the status bar. The developer forums are awash in discussions about the commands to hide the status bar-- it's built in to the SDK.
I figure someone will have put out a small program that does nothing but hide the status bar or allow its tweaking... much like StatusBar does on the Palm OS 5 PDAs...

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

SOLUTION to recon 3d (and probably more) on win 8.1 with clean boot

Similar Messages

Maybe you are looking for