Solution WebLogic 6.0 on Linux RedHat 7.1

Here's the link that helped me solve my installation problems.
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.support.install&item=7267&utag=
Thanks Dude!!!

I had the same problem I did this and it fixed it. I did not down grade my motif.
Create the following symbolic links in the /usr/X11R6/lib directory:
ln -s libXmu.a libXm.a
ln -s libXm.so.2.1 libXm.so
ln -s libXt.so.6.0 libXt.so.
Hope it helps,
cvb

Similar Messages

Does Weblogic Server 5.1 supports RedHat Linux 6.2?

Hello All,
Does Weblogic Server 5.1 supports RedHat Linux 6.2?
Best Regards,
Samuel Yung
[email protected]

FYI.
I am running RH 6.2 and Weblogic 5.10 with no problems.
w/Apache 1.3.12
Only using WL for EJBs and jdbc pool at this time. So your milage may vary.
Michael Girdley wrote:
No, not yet. Version 6.0 will.
The platform support page for WebLogic Server is located at:
http://www.weblogic.com/platforms/index.html
This page has the latest and greatest information on the platforms that
WebLogic is certified and supported on.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Samuel Yung" <[email protected]> wrote in message
news:[email protected]..
Hello All,
Does Weblogic Server 5.1 supports RedHat Linux 6.2?
Best Regards,
Samuel Yung
[email protected]
/\/\i|<e
Mike Kincer
Solutions Developer/Engineer
Atlas Commerce "ebusiness evolved"
Office phone: +1-607-741-9988
mailto:[email protected] [http://www.atlascommerce.com]

Does Weblogic Server 5.1 supports RedHat Linux 7?

Does Weblogic Server 5.1 supports RedHat Linux 7?
Thanx in advance.

FYI.
I am running RH 6.2 and Weblogic 5.10 with no problems.
w/Apache 1.3.12
Only using WL for EJBs and jdbc pool at this time. So your milage may vary.
Michael Girdley wrote:
No, not yet. Version 6.0 will.
The platform support page for WebLogic Server is located at:
http://www.weblogic.com/platforms/index.html
This page has the latest and greatest information on the platforms that
WebLogic is certified and supported on.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Samuel Yung" <[email protected]> wrote in message
news:[email protected]..
Hello All,
Does Weblogic Server 5.1 supports RedHat Linux 6.2?
Best Regards,
Samuel Yung
[email protected]
/\/\i|<e
Mike Kincer
Solutions Developer/Engineer
Atlas Commerce "ebusiness evolved"
Office phone: +1-607-741-9988
mailto:[email protected] [http://www.atlascommerce.com]

Weblogic server 8, SP2 on Redhat Linux 9

HI,
Does Weblogic 8, SP2, work on Redhat Linux 9.
Thanks in advance

Thanks for your suggestion. I'll get the Redhat Linux 7.3 and try it.
Cheers,
LiuDK
"zlldw" <[email protected]> wrote:
>
Hi,
I got the same error when tried redhat 9. I asked for help in the newsgroup,
but
got no reply. So I used 7.3 instead. It works fine. Thanks
William
"Liudk" <[email protected]> wrote:
Hi All,
I encountered an error during install tuxedo81 on Redhat 9.1.
The error messge is:
root@Linux tuxedo]# sh tuxedo*
Preparing to install...
tuxedo81_linux.bin: line 1: 3593 Segmentation fault /tmp/install.dir.2714/Linux/resource/jre/bin/java
-Djava.compiler=NONE com.zerog.lax.LAX "/tmp/install.dir.2714/temp.lax"
/tmp/env.properties.2714
Thanks in advance.

Oracle Forms (Support & Certification) on Linux RedHat AS 4.0 (Intel 32bit)

Hello,
Does anybody know for sure if Oracle is certifying Forms (part of Application Server 10.1.2.2) on Linux RedHat AS 4.0 (Intel 32 bit). We are trying to move from v3.0 to v.4.0, however without Oracle support, that might not happen.
Any help or guidance on this matter would be greatly appreciated.
Regards
Kunal Bansal

I did search in Metalink indeed. This document is really the latest certification they have. But funny thing is that the rda.sh script Oracle released checks for RH4 in addition to RH3. I have my test iAS server (10.1.2.0.2) and iDS (same version) installed on RH 3 (just in case) but I have installed iAS server in 2 different places (for deployment) on RH 4 - both went just fine. I know there is a document on Metalink, explaining how to install on RH 4 - basically, they released a small patch set for those who wants to install on RH 4. I did apply that patchset (it is for OUI not for the forms). My quick solution to implement this patchset was to create a staging directory (disk1, ...) and then replace couple of files located under disk1 staging directory with the files that comes with the patchset (unzipped into a separate place), then start the installation of 10.1.2.0.2 on RH 4. Everything then went just perfect on RH 4. No problems reported so far (2 separate installations on 2 separate sites on RH 4). I don't know if this helps but just wanted to provide some feedback.
R/ Zaf

WebLogic 7.0 install on RedHat 7.1 failed

Does anyone successfully install WebLogic 7.0 on Linux? I try it with
the following error:
[root@tiger /download]# ./weblogic700_linux.bin
Extracting
0%....................................................................................................100%
Font specified in font.properties not found
[--symbol-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
Font specified in font.properties not found
[--symbol-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
** Error during execution, error code = 11.

wrong news group. Try tuxedo.general
I've only seen Tuxedo used on RDH 7.1 and 7.2.
Wayne
Juan Melis wrote:
Hi,
I'am trying install Tuxedo 8.0 Client over
RedHat 2.1 Advanced Server. The installation
hangs and the ps command shows a java process defunct.
I suspect that the .java_wrapper packaged
in the tuxedo80_linux.bin fails.
Does somebody have any idea?
Thanks in advance.
Juan

Weblogic Certification on SUSE Linux Power5/6 ..!!

Hi,
Please can I find below mentioned certification information ?
Weblogic 10.3 for SUSE Linux on POWER 5/6
Or FMW 11g (WebLogic 11g) for SUSE linux on POWER 5/6
Thanks & Regards,
Noman

Rudolf Vriend (guest) wrote:
: Has anyone ever succesfully used proc on SuSe Linux 6.0 with
: gcc 2.7.2.3 ?
: I am experiencing severe problems with the gcc system header-
: files with statements like #include_next ...
: Any hints ?
: Thanks a lot !
Hi Rudolf,
have a look under $ORACLE_HOME/precomp/admin:
there is a file called pcscfg.cfg (or similar). If I remember
right there is a line with "redhat", replace this line with the
corresponding entry for SuSe
rgds
Patrik
null

Plugin for Weblogic 6.1 on Linux

Do you have a plugin for Weblogic Server 6.1 on redHat linux?? If yes where can
i download the same??
Thanks in advance
Dilip

Yes the plugin comes along with the BEA Weblogic server for Nt version in the folder
<beahome>\lib\linux. I installed this and it is working.
"dilip nayak" <[email protected]> wrote:
>
Do you have a plugin for Weblogic Server 6.1 on redHat linux?? If yes
where can
i download the same??
Thanks in advance
Dilip

Linux Redhat 7.3 Support IDE RAID Promise PDC20276 "845E Max2 LR

845E Max2 LR (MS-6398E) Motherboard with onboard PDC20276
I Must have linux redhat 7.3 support for onboard
PROMISE IDE RAID -- if it was clearly supported I
could build a serious web farm or render farm with
this nicely priced powerhouse of a motherboard.
I emailed MSICOMPUTER.com to see if they support it since web site has no
specific mention of Linux Redhat 7.3 support.
Very low cost high performing MBoard -- I am hoping to build a web farm using the
mirroring capability of the onboard chip
Please advise if you know of anyone with success or hints.
I am assembling it and about to try -- no doc on Promise.com or redhat.com or msicomputer.com
or anywhere.
promise.com site says mboard maker must support onboard promise chips. promise.com web site
says promise.com will not support mboard makers.
Thanks In Advance
Critical Need for support backing by MSICOMPUTER
Arthur

Quote
Originally posted by wystewart
Check
http://www.linux-ide.org/
You will likely need to patch the kernel and re-compile. Suggest using the latest kernel, 2.4.19.
Thanks. Here is were I am up to (see my question at the end).
I. I received rhup-ftb22.zip from the people at promise.com who promised that they can't support
this but I "could try it". MSI.com must support the onboard chip. Anyone at MSI.com feel free to contact
me direct -- perhaps we can work something out
and together we can qualify this promise chip for
Redhat 7.3, anyway:
rhup-ftb22.zip contains:
1.02.0.22up
FT-ioctl.txt
install
modinfo
modules.cgz
modules.dep
pcitable
readme.txt
rhdd-6.1
setup-ft
II. complete readme.txt:
----- snip ------
FastTrak Series Linux Driver Version 1.02.0.22
Installation Note for RedHat Linux [06/27/2002]
[INTRODUCTION]
1.1 Foreword
This driver diskette should be used with all Promise FastTrak Series
adapter and onboard chipsets running under RedHat Linux operating
systems.
Do NOT use this diskette for other versions of Linux for FastTrak
support.
NOTE: For FastTrak users with Promise chips labelled PDC20265R or PDC20270
(FastTrak100 Lite motherboard-embedded solutions or FastTrak100TX2)
running with Linux kernel versions 2.4.x, be aware of additional
instructions to be performed.
See Item 1.3 below for description of the issue which use of the
driver and instructions solves.
1.2 Support List
PDC20262 FastTrak66
PDC20265R FastTrak100 Lite
PDC20267 FastTrak100
PDC20270 FastTrak LP/TX2/TX4
PDC20271 FastTrak TX2000
PDC20276 MBFastTrak133 Lite
PDC20277 SBFastTrak133 Lite
with
Red Hat 7.0 (kernel 2.2.16-22)
Red Hat 7.1 (kernel 2.4.2-2)
Red Hat 7.2 (kernel 2.4.7-10)
Red Hat 7.3 (kernel 2.4.18-3)
1.3 Linux kernel 2.4.x ATA issue on FastTrak Series PDC20265R/PDC20270
Linux Kernels 2.4.x misidentifies PDC20265R/PDC20270 (FastTrak 100 Lite
motherboard-embedded solution/FastTrak100TX2) cards and/or chips as simple
IDE controllers. This results in the built-in Linux IDE driver trying to
handle the controller and can prevent the proper FastTrak ATA RAID driver
to be loaded. Follow the installation instructions AND the parameter
commands referred to in the Notes section.
This called "IDE issue."
[INSTALLATION]
Extract the contents of the ZIP file on to a formatted floppy disk.
(ZIP file can be extracted by `WinZIP' in windows or `unzip' in linux)
Label the disk "FastTrak Driver Disk".
2.1 To install the FastTrak Series Linux Driver into an EXISTING SYSTEM:
1.) Boot linux system and login as root.
2.) Insert FastTrak Driver Disk for install FastTrak Driver by issuing
commands :
# mount /dev/fd0 /mnt/floppy
# cd /mnt/floppy
# sh install (Answer Yes/No when inquire setup configuration)
You can answer Yes to load FastTrak driver when linux booting everytime.
# cd ..
# umount /dev/fd0
NOTE: All IDE channels except the first and second one are disable
for the "Linux 2.4 ATA issue". It can be enable by removing
'ide2=0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0 ide9=0' in
/etc/lilo.conf or /boot/grub/grub.conf.
3.) Reboot redhat linux system.
2.2 To install the FastTrak Series Linux Driver into a NEW SYSTEM
1.) Start the RedHat Linux Installation with CD ROM booting.
2.) At the "Welcome to Red Hat Linux ..." installation screen, a
prompt labeled "boot:" will appear at the bottom of the screen.
3.) If you are in "IDE issue", please press TAB key and append parameters
(see Note 1 below).
--- OR ---
If you are NOT in "IDE issue", type "expert" (without quotations)
at the "boot:" prompt, then press the enter key.
4.) At the "Devices" dialog box, insert the FastTrak Driver Disk in the
floppy drive and then select "OK" or "Yes".
If installing RedHat 7.1/7.2/7.3, please skip to Step 9.
5.) After reaching the "Devices" dialog box again, select "Add Device".
6.) When asked "what kind of device would you like to add?", select
"SCSI", and then select "OK".
7.) Press the "P" key and scroll down to "Promise FastTrak Series ....",
and then select "OK".
8.) The installation process will now display "Promise FastTrak Series
Linux Driver" has been found. Select "Done".
9.) If you are in "IDE issue", when the Boot Loader Configuration menu
is displayed, please type parameters (see NOTE 2 below) in the Kernel
parameters field.
--- OR ---
If NOT in "IDE issue", ignore step 9 and proceed to step 10.
10.) Continue with the installation as normal.
11.) If installing RedHat 7.2 or Update Linux to RedHat 7.1/7.2/7.3.
Press Ctrl-Alt-F2 when installation at the "Congratulations" menu.
Other RedHat version please click "Exit" button to finish installation.
12.) Insert the FastTrak Driver Disk floppy, Issue commands to load FastTrak
driver.
# chroot /mnt/sysimage
# mount /dev/fd0 /mnt
# cd /mnt
# sh setup-ft
# cd /
# umount /mnt
# exit
13.) Choose your selection here, after FastTrak driver setup successful.
Please Press Ctrl-Alt-F7 and click "Exit" button to finish installation.
[NOTE]
1.) "expert ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0
ide5=0 ide6=0 ide7=0 ide8=0 ide9=0"
2.) "ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0
ide6=0 ide7=0 ide8=0 ide9=0"
----- snip ------
III. For my RAID farm, render farm, I have multiple
20 GB IBM IDE/100 hard drives, so I connected one
of them to a regular (non-RAID) IDE port, booted from CDROM and sucessfully installed Redhat 7.3 selecting very simple defaults. Tried multiple times, clean shutdown, clean reboot, all OK, no surprises. Great.
Then after clean shutdown, I removed ths drive from
the IDE connector and moved it to the first RAID IDE
conenctor. Then I added an identical blank drive to the
second RAID IDE connector. The boot process guided
me to select between "Performance" mode (striping)
versus "Security" mode (mirroring). I selected mirroring
purely so that I do not have to panic when a drive fails, I can take my time in replacing the falty drive and no
one will ever have noticed a problem.
Upon reboot, it started to clear boot but locked up
within a few seconds after starting to spew boot messages.
I would have expected that Linux would have recognized the RAID array as some standard
supported SCSI drive.
I guessed the promise engineers didn't think of
adding a BIOS option to force the chip to emulate
some simple cheap reliable SCSI drive (maybe the next
motherboard support chip), so I imagined that I would
have to make sure PDC20276 (MBFastTrak133 Lite)
support is added.
Then I returned the drive to the IDE (non-RAID) port,
rebooted successfully, unzipped rhup-ftb22.zip into
a directory and ran the following command:
# sh install
Looking at install, it seems to take a peak in
the following directory:
/lib/modules
and sees the name "2.4.18" in mine just to figure
out where to copy "FastTrak.o" (/lib/modules/.../kernel/drivers/scsi in my case).
Then it determines that /etc/lilo.conf is not there
and confirms that /boot/grub/grub.conf exists and
append the following text to the "kernel" line:
ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0 ide9=0
then inserts the following modules:
FastTrak
scsi_mod
sd_mod
QUESTION: Should I now expect to boot OK by removing the drive from the IDE (non-RAID), moving to
first RAID port, adding second blank identical IDE drive
to second RAID port?
BEFORE DOING THAT: Before trying, for fun, I added two blanks to the RAID ports and booted from the IDE
(non-RAID), yes three IDE drives altogether.
Here is what I now see in the dmesg:
---- snip ----
SCSI subsystem driver Revision: 1.00
PROMISE FastTrak Series Linux Driver Version 1.02.0.22
scsi0 : FastTrak
Vendor: Promise Model: 1X2 Mirror/RAID1 Rev: 1.10
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 39062500 512-byte hdwr sectors (20000 MB)
sda: unknown partition table
---- snip -----
FINAL COMMENT:
Seeing the following line in the readme.txt:
Red Hat 7.3 (kernel 2.4.18-3)
is very comforting when my uname -a results in:
Linux **.**.com 2.4.18-3 #1 Thu Apr 18 07:37:53 EDT 2002 i686 unknown
Perhaps I should freeze my kernel at 2.4.18-3 until
promise gives me the source code to FastTrak.o X(
In the words of strongbad of http://www.homestarrunner.com:
X( What's their freakin' problem X(
Arthur

Oracle 10.2.0 DB installation problem on Linux RedHat 4

When I install Oracle 10g release 2 database on my Linux RedHat 4 platform, I got the following error message (from action log file):
INFO: /u01/app/oracle/product/10.2.0/db_1/bin/genorasdksh: Failed to link liborasdkbase.so.10.2
INFO: make: *** [liborasdkbase] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'all_no_orcl ihsodbc' of makefile '/u01/app/oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2006-10-05_11-17-26AM.log' for details.
Exception Severity: 1
Can someone help me to solve this problem?
Your kind assistance will be highly appreciated!

I didn't install the whole OS but just some packages that contain required rpms by Linux Redhad 4. I guess I accidently missed a package. In order to make sure that I have installed all necessary packages, I just re-installed the OS with care. Thanks for your advices.
The Oracle DB installation was successful, however, after I installed the Oracle HTTP Server and then stop the HTTP Server, I can't start it again. The following is the error message.
[oracle@linuxkm database]$ /u01/app/oracle/product/10.2.0/http_1/opmn/bin/opmnctl startproc ias-component=HTTP_Server
opmnctl: starting opmn managed processes...
================================================================================
opmn id=linuxkm:6200
0 of 1 processes started.
ias-instance id=standalone
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=23484)
failed to start a managed process after the maximum retry limit
Log:
/u01/app/oracle/product/10.2.0/http_1/opmn/logs/HTTP_Server~1
Thank you very much for your help!

Installing Oracle 8.1.7 on Linux RedHat 7.1

I am trying to install Oracle 8.1.7 on a Linux RedHat 7.1 machine with P4 1.7GHz. I 've tryed all the papers I found on the net for setting the user accounts and groups, linking with the old gcc libraries, etc. The problem is that after starting the OUI and when a window pops-up that spans the products list available, the whole operation finishes too quicly without reaching the 100%. At the next screen when I am trying to give the Instalation Unix group - should be oinstall/dba - I press next and get the message "Unable to setup Inventory. You may not have proper permisions". The machine has 256MBs Ram and 520MB Swap file on a 20GB HDD.Has anyone else seen this before? I couldn't find anything on the net. Can anyone help me? Thanks in advance...

Hi,
In the user where you are trying to install Oracle, give the following command at the prompt.
$ umask
The result should be "022". If it is not, connect as root and change the umask-settings of the user.
$ umask 022 <user-name>
and connect as the user, where you are trying to install and run the Installer.
Hope this will work,
Murali.

Installation Iplanet 4.1 Enterprise Web Server on Linux RedHat 7.1

I am trying to install IPlanet 4.1 Enterprise Web Server on Linux RedHat 7.1.
After unloading the software from CDROM to a temp directory, and run ./setup, I get the following error:
eroor while loading shared libraries; libncurses.so.4: cannot load shared object file : no such file or directory.
Has anyone know how to resolve it??. Thanks.
regards,
Benny Tan

I have answered for this topic previously for another thread. Please follow the URL to see the answer.
http://forum.java.sun.com/thread.jsp?thread=257294&forum=14&message=968185

Unable to install Oracle 9.0.1 on Linux RedHat

Hi,
I am unable to install Oracle 9.0.1 on Linux RedHat, tried many times. While installing i get following errors-
"Error in invoking target install of makefile
/usr/oracle/9.0.1/plsql/lib/ins-plsql.mk"
"error in invoking target ioracle of makefile
/usr/oracle/9.0.1/rdbms/lib/ins-rdbms.mk"
"Error loading native library : libnjni.so"
Installation halts while configuring Net Confugration Assistant....
Any workaround ???
Thanks in advance.

There are many versions of RedHat. Your post indicates you are using one of them, but your post really does not give a hint as to which one. Funny thing is - different versions have different install requirements.
I really don't understand why operating system version is such a big secret. Especially since it is logically so critical to installation issue. Even when installing on Windows, the first questions is 'which Windows'.
You have, of course, followed the suggestions at http://www.puschitz.com and noted the errors and workarounds, have you not.
Especially about things like packages and versions.

Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform?

Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank

9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM

Managing Oracle 9i On Linux Redhat AS

Hi All,
Can someone provide me document references for managing oracle9i on linux redhat.
Thanks in advance.

managing oracle9i on linux redhatWhat do you mean exactly ? Installation , Administration , or what else ?

Solution WebLogic 6.0 on Linux RedHat 7.1

Similar Messages

Maybe you are looking for