Solution - Workaround for latest NIC's not loading

hey all,
have discovered (with the help of a friend) a workaround for getting new
NIC's working with the ZENworks Imaging boot cd.
have tried posting the solution to coolsolutions but nothing seems to be
happening so thought i would post a message here.
basically a method on manually loading the NIC module and allowing you
to image up or down to a server.
it's not a solution in my mind as you still require manual intervention
but it will at least buy some time while you wait for a newer bootcd.iso
to come out.
process is a bit big for here, but please email me if you would like a
look and i would be happy to email it through.
and if it works for you, maybe leave a message to let others know if it
was useful/not so useful.
regards,
Leon Hewitt <[email protected]>
Curtin University of Technology

Leon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

HT1498 I rent a movie and I can see it. And I go to iTunes Store, check for rentals and its not loading the movie.

I rent a movie and I can't see it. I went to itune store and check for rentals, but its not loading the movie. What should I do?

I went to check for rentals on Apple TV to find rental. There is no support and no resolve. The screen just kept loading, never showing the movie after I purchased it. This is the second time this has happened to me. Very disappointed.
My have to look for alternative..

Upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tryed to reinstall still asking for reboot still does not load

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

U300 Touchpad Driver for Windows 8 Does Not Load Properly

I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
A standard mouse works just fine (albeit without any Win8 functionality).
***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

Hi,
If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system.
Meanwhile please try to enable or disable Secure Boot by referring this article:
Secure Boot
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
Kate Li
TechNet Community Support

Tried the solutions posted for this "SubVI filter not executable. Undefined error" but not solving the problem

Hello,
I am trying to use a lowpass filter for my application but getting the error "SubVI filter not executable. Undefined error".I tried working with the solutions at this post
http://forums.ni.com/t5/LabVIEW/SubVI-filter-not-executable-Undefined-error/m-p/1996701#M657751 and results with
1. Create a blank vi, put a VI filter in the block diagram (this should not be functional as it is not wired), copy it and paste it in my other project. I believe if the filter is the first vi of a blank project, it is funcitonal and then you may copy it wherever you need to.
Result:
2.Tried to open the filter panel of the Filter but showing the same error as shown inthe below image
Don't why the solutions worked for others are not working.Can someone suggest a solution for this.
thanks in advance.

Hi PatanGova,
Very strange error. Actually, there are no required inputs on this express VI, so it should be able to run even without wires. It is not correct as you said: "this should not be functional as it is not wired". Nothing will happen, true, but the run arrow should not be broken.
For some reason, the VI with the Filter express VI fails to compile. I tried it on my computer (LV 2013) and get no error when I add it to a new VI. As was suggested in the linked forum thread, you need to open the front panel of the Filter VI and run it to see the explicit error.
If you do, do you also get the error:
"This VI claims to be part of a library that does not include the VI. The VI might have been deleted from the library. Add the VI to the library again or select File - Disconnect from the library."?
If you do, it seems that you may have a project library somewhere that has taken ownership of the express VI. The ownership prevents you from running or editing the express VI. To free the VI, you need to do one of two things. Either, you need to load the library into memory, or you need to disconnect the VI from the library. Either way, you need to find the project library that has taken the ownership of the VI. As soon as it is released, it should run for you. You release it by selecting File»Disconnect from Library on the VI.
The workaround described in your link (and also here: http://forums.ni.com/t5/LabVIEW/compatibility-problem-labview-2009-2010-2011-quot-This-VI-claims/td-... tells that you can make a copy of the VI and thereby create another instance that is free. This solution may work for you as well, but if not, you may not have created the copy properly. Maybe your copy of the VI also became part of some project library that took ownership. In either way, you should rather find the project library to release the VI before trying the workaround to copy it.
If project library ownership is not the problem, maybe the problem is connected to LV 2011, as most forum posters report that it only happens here.

Roboform adapter even for latest Firefox does not work..

I have tried all workaround given in this forum , but still roboform plugin does not work for latest version ( 24) does not work , it dsplay first time when you install FF , but next time it disappears. Any solution ?

I have download roboform from here [http://www.roboform.com/ Roboform] and i have installed it on my laptop. at the end of installiation i see the roboform toolbar in firefox and it operates normally. try again See also [https://support.mozilla.org/it/questions/974226?esab=a&s=&r=8&as=s https://support.mozilla.org/it/questions/974226?esab=a&s=&r=8&as=s] You must remove your old toolbar before install the new version of roboform 7.9.2.5

Latest version does not load web pages correctly with windows 8 system

I did a new install of Firefox (latest version) on a new Windows 8 laptop (I did not import anything). When I go to Hulu & Facebook (as an example, this happens to almost all sites I try to load) the pages do not load correctly, I get hyper links on the left side of the screen. If I refresh then the pages load correctly.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Install software for Deskjet 2540 will not load on Windows XP Home edition SP3 machine

I have successfully connected a new Deskjet 2540 printer to a Windows 7 machine, and IPAD Air, and an XP Pro laptop.
I cannot get the install software to load on and XP Home edition SP3 machine. I have tried all of the HP remedies that I can find, over period of two days, but the installation fails every time with the message "Installation failed. The software required for your printer could not be installed".
What can be done?

Hi,
Thanks for your second installment of help suggestions.
I started check disk as you proposed and it ran happily for some hours with evidence of progress. However eventually I found the computer stopped with a number of suggestions for restarting. I tried all of these and some others, but got no further than the first Windows picture. At this point the machine restarts, and goes through the same process.
The printer problem, as you can see has unfortunately become secondary to trying to recover the system.
What I propose is to try to read the disc in question on another computer, and extract the important data files to a safe place. Then to return the disc to its own machine and use the recovery CD, to try to get the machine to recover with the minimum of loss. If this succeeds, I might even find that the printer software then loads without problem. There is a big IF there, and I won't hold my breath.
None of this relates to the printer problem, and fortunately i have three other devices running which are happily connected to the printer.
I just wnted to explain why there will be no further feedback for a while. I will take my time with the recovery process.
Thanks for all of your help. I have just been unlucky.
Regards

Mac for office 2011 will not load

Mac fo ruff ice 2011 will not load?

On an iPad (or any iOS device), not it won't. It is for Windows or Mac OS X only.

Skin for iphone, pictures are not loaded

Dear community,
i'm testing an iphone skin for a simple mobile browser application in a desktop browser. The pictures are not loaded and I cannot find the reason:
JDeveloper 11.1.1.5.0
Tree in Web Content:
=============
images/backButton.png
images/toolButton.png
skins/iphone.css
page.jsp
trinidad-config.xml
============
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>iPhonewebkit</skin-family>
</trinidad-config>
trinidad-skins.xml
===========
<?xml version="1.0" encoding="ISO-8859-1"?>
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>iphone</id>
<family>iPhonewebkit</family>
<render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
<style-sheet-name> skins/iphone.css </style-sheet-name>
</skin>
</skins>
iphone.css
======
.button {
position: absolute !important;
overflow: hidden !important;
top: 8px !important;
right: 6px !important;
margin: 0 !important;
border-width: 0 5px !important;
padding: 0 3px !important;
width: auto !important;
height: 30px !important;
line-height: 30px !important;
font-family: inherit !important;
font-size: 12px !important;
font-weight: bold !important;
color: #FFFFFF !important;
text-shadow: rgba(0, 0, 0, 0.6) 0px -1px 0 !important;
text-overflow: ellipsis !important;
text-decoration: none !important;
white-space: nowrap !important;
background: none !important;
-webkit-border-image: url(/images/toolButton.png) 0 5 0 5 !important;
.backButton {
position: absolute !important;
overflow: hidden !important;
top: 8px !important;
left: 6px !important;
margin: 0 !important;
height: 30px !important;
width: auto !important;
line-height: 30px !important;
font-family: inherit !important;
font-size: 12px !important;
font-weight: bold !important;
color: #FFFFFF !important;
text-shadow: rgba(0, 0, 0, 0.6) 0px -1px 0 !important;
text-overflow: ellipsis !important;
text-decoration: none !important;
white-space: nowrap !important;
background: none !important;
-webkit-border-image: url(/images/toolButton.png) 0 5 0 5 !important;
padding: 0 !important;
border-width: 0 8px 0 14px !important;
-webkit-border-image: url(/images/backButton.png) 0 8 0 14 !important;
I have tried also relative URLs by moving images directory into skins directory, but without success. What am I doing wrong?
Thanks for support,
DF
Edited by: 907283 on 11.01.2012 01:31
Edited tree

Sorry, I forgot to paste it:
<tr:messages/><h:form>
<tr:panelHeader text="Display Items" styleClass="toolbar">
<tr:commandButton text="Back" action="start"
styleClass="backButton"/>
<tr:commandButton text="Show Details" action="detail"
styleClass="button"/>
</tr:panelHeader>
toolbar definition in css:
.toolbar {
box-sizing: border-box !important;
-webkit-box-sizing: border-box !important;
-moz-box-sizing: border-box !important;
border-bottom: 1px solid #2d3642 !important;
border-top: 1px solid #000000 !important;
padding: 10px !important;
height: 45px !important;
background: url(/images/toolbar.png) #6d84a2 repeat-x !important;
display: block !important;
.toolbar > h1 {
position: absolute !important;
overflow: hidden !important;
left: 50% !important;
margin: 1px 0 0 -75px !important;
height: 45px !important;
font-size: 20px !important;
width: 150px !important;
font-weight: bold !important;
text-shadow: rgba(0, 0, 0, 0.4) 0px -1px 0 !important;
text-align: center !important;
text-overflow: ellipsis !important;
white-space: nowrap !important;
color: #FFFFFF !important;
border-bottom: none !important;
Thanks!

"iTuneUp.dll" for tuneup add-on for 64-bit will not load

When I load up itunes with tuneup, I get the error "iTuneup.dll" could not load in 64-bit mode.
It goes on to say "Try contacting the plug-in vendor(s) to see if a 64-bit version is available.
Is there a 64-bit version out there or is there something else going on?

This is iTunes version 12.1.0.71 and resolved the issue for me per TuneUpMedia:
This is their response :
TuneUp Support (TuneUp | Support)
Hello,
Thank you for contacting us.
We apologize for any inconvenience that this may have caused you.
If you are experiencing errors related to the new iTunes version for Windows machines 64bit, please install the fix from the iTunes support page below:
http://support.apple.com/kb/DL1784
If the issue still persists, do not hesitate to contact us.
Thank you,
TuneUp Support

Metadata for podcast content files not loading when using Public Site Mgr.

Metadata entered via QickTime for video files does not stay with thge file when it is uploaded for our iTunes U site via the Public Site Manager.

Please note that Java and Javascript are not related. iWeb uses a lot
of Javascript, not Java. There may be some issues with the Javascript
generated by iWeb -- I don't know. If it seems to work for someone
and not for someone else then it is an issue at the browser end, not
the website end. Each browser may not be handling the Javascript in
exactly the same way. (You gotta love standards.)
Dave

Need Solution/Workaround for Note 947081: SG dates in MMDDYYYY

We are implementing ESS for Singapore. Dates are being shown in MMDDYYYY format - we need DD.MM.YYYY, which is the Singapore standard.
Our large user base all have language EN, country SG.
With reference to Note 947081, dated 07.09.2006, I'd like to enquire if there is a solution or workaround to the limitation given in the Note:
"Known Limitations
10. Calendar date formatting for Singapore
The calendar date formatting for the locale "en_SG" Singapore is MM/DD/YYYY similar to the US American date format.
This is a feature of the SUN Java JVM. It is not possible, by means of
SAP NetWeaver, to change this behaviour."
SAP informs us there is no update from them overcoming this problem.
Changing the user master for the entire user base is not feasible.
System details: We are running on Unix Server, Java from IBM.
Inconsistencies: Any MESSAGES containing dates from R/3 come in DD.MM.YYYY
From the ESS portal some links point to ITS sub-screens - which are in DD.MM.YYYY

Hi Chopper,
How to change the standard behavior internally...?
Thanks in advance.

Seeking past downloaded section in progressive vid for latest OSMF does not snap back or throw err

I have an OSMF player that has always snapped back to its starting point if the area scrubbed to is after the amount downloaded (does that make sense?) for progressive video streams. I updated to the latest OSMF (1.6) player and now the scrubber will stop scrubbing wherever you want and the player stops dispatching current time updates and does not throw errors if it is after the downloaded amount. it just sits there and the loading indicator pops up and doesnt go away , the stream dispatches a 'buffering' trait as well (no pause or anything like that)
I am checking if the mediaPlayer can seek:
if( _mediaPlayerCore.canSeekTo( time ) )
before seeking, and i even encapsulated in a try catch to see if there were any errors (there weren't)
i am perplexed. is this a bug in the new version?

Hi Csmaller,
please try http://osmf.org/dev/1.6gm/ to play your asset. If it plays correctly, the issue might be in your code.
If not, please check your video encoding or post it ot the forum for others to investigate.
S.

Setups for new operating units not loading to target

If there is a new operating unit in the source, setups for that operating unit do not seem to load into the target if that new operating unit does not exist in the target.
Is there a script to address this issue?
Any additional advice will be appreciated.
Edited by: user11071661 on Apr 16, 2009 1:34 PM

Hi,
There are lot of dependencies between setup data that you are trying to load. Operating Unit depends on Accounting Setup which in turn depends on setups like Calendar, Currencies and Chart of Accounts. So, you have to make sure that you have loaded all prerequisite data before loading operating unit.
Thanks
Mugunthan.

Solution - Workaround for latest NIC's not loading

Similar Messages

Maybe you are looking for