Solutions for issues on iPhones with firmware 3.0

Don't know if these issues - flaws and fixes have been addressed in this forum, but here it is.
Issues:
Since updating to firmware 3.0 on my 2G and 3G iPhone, I have noticed the following problems on both iPhones:
1) slow response, faster battery drain, general erratic behavior
2) GPS is inaccurate, long time to connect to satellites for GPS tracking, was accurate when on firmware 2.2.1 using Map app (only on 3G or maybe 3GS iPhones too)
Fixes:
1) turns out that the cause of the first issue on both iPhones (at least for me) was when the iPhones updated to firmware 3.0 - PUSH email service was automatically enabled. Disabling PUSH email service to FETCH email service in preference did the trick. While your there, scroll to the bottom and chose Advance then choose each email address and change to Fetch as well for each email address listed. Yes this will disable Push email, but will temporarily fix this issue until the firmware fix comes out.
2) this issue is really addressed for 3G and 3GS iPhones with GPS capabilities only. To make the GPS accurate again and connect with tracking satellites, turn off 3G networking service. Probably another firmware issue which causes a GPS - 3G network conflict, but once the 3G network service is disabled, the GPS worked accurately again and connected to tracking satellites instantaneously. GPS accuracy worked flawlessly with Navigon app mapping when 3G network service is disabled. When you need the 3G service just activate again.
These simple fixes might not work for everyone, but try it out, it worked for me.

Quote from: microsoftenator on 24-May-05, 13:27:49
and by the way...
I found out that if you push Play, FM, Record and the 5-way-button-down; it resets the player.
You don't have to wait for the battery to run down.
OH MY GOD!!!!!
YOU'RE MY HERO!!!!!
I still have my own topic unanswered about the file sorting in the player, tho....:(

Similar Messages

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

HT4972 Can you update your iPhone with firmware V 4.2.1 to v5. If so, How. I just tried and it did nothing bu mess things up.

Can you update your iPhone with firmware V 4.2.1 to v5. If so, How. I just tried and it did nothing bu mess things up.

Greg434 wrote:
I'm screwed. Time for a new phone. Model # A1242 plain old 3G. Thank you for your assistance Michael.
Well, you're timing is perfect then Are you eligible for any upgrade pricing from your service provider?
I skipped over the iPhone 4s, and I am eligible for full upgrade pricing in almost exactly one month from yesterday, so I will be moving to an iPhone 5 next month.

Can I pay full price for a new iPhone with sprint instead of a contract?

Can I pay full price for a new iPhone with sprint instead of a contract?

Apparently not (in the U.S.). See the photo - it only shows T-Mobile as accepting contract-free (from the Apple Store).

Possible solution for white C2D iMacs with screen artifacts or lines

I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

Anyone having issues syncing iPhone with Microsoft Outlook 2007? iTunes says it is syncing but it will not update calendar or contacts. It just stopped working a few weeks ago.

Anyone having issues syncing iPhone 3GS with Microsoft Outlook 2007? iTunes says it is syncing but it will not update calendar or contacts. It just stopped working a few weeks ago.

I'm glad to hear that I'm not the only person struggling with exact issue. I've rebooted, upgraded, re-installed, pulled all my hair out as nothing works.
The biggest dissapointment with this thread is that nobody seems to have responded with a solution.
And yes I've managed to pull together enough intellegence to tick the box "sync to outlook" in iTunes - still nothing man.
Definately does not sync from phone to PC and is very hit and miss on PC to Phone. In other words now running 2 seperate calendars - Not helpful Jan.

DO Corp. owned iPhones brick when wiped (employee registered for "Find My iPhone" with their iTunes account)

We issue Corp. owned iPhones to employees. If the employee registers the phone for "Find My iPhone" using their personal iTunes account, if the employee leaves or is terminated and we have to wipe the phone, does the phone brick?

They do not brick, but it would be necessary to either turn off Find My iPhone prior to restoring the device or knowing the Apple ID/password that the Find My iPhone was setup with to turn it off afterwards.
Without this information, the device would be useless.

Suggestion for a possible iphone with slide out keyboard.

I dont really know if there is a suggestion forum but i thought it would be neat if apple designed a iphone with a physical keyboard for those people who love to text. Apple could even run a internet pole to see what there customers would think i mean the iphone is top notch but i think having one with a slide out keyboard could possibly increase apples sales. Any who just thought id throw that out there and keep up the great work Apple.

This is where you need to go with your suggestion: http://www.apple.com/feedback/iphone.html
I would not hold my breath.

Full mesh VPN solution for on MPLS network with PE and CPEs

Hi,
We are trying to evaluate some best solution for Hub-Spoke mesh vpn solution in a MPLS network. The VPN hub router will be in PE router and all the VPN spoke will be in CPE.
Can someone please let us know what will be the best vpn solution, we understands that there will be some technical limitations going with GETVPN but still we did counld find any documenation for possiblity of using DMVPN.
How about the recent flexvpn, can fex-vpn work on this requirement, where can i get a design/configuration document.?
thanks in advance.

Hello,
GetVPN is intended for (ANY-to-ANY) type of VPN communication, over an MPLS network with Hub and Spoke Topology, your best Option is to look for Cisco (DMVPN) implementation where this type of VPN is primarily designed for Hub & Spoke.
Regards,
Mohamed

Setting for issue subcontract material with ME2O

Hi,
In our system presently we are issueing all the material to subcontract with MB1B movement type 541, I wan tto knowthe settings and process of issue the material with ME2O, what settings are needed this is to control some that we can see the issue qunaity against that PO to the vendor.
regards,
zafar

Hi,
I have created a Subcontract PO now in ME2O I can see that POthen I select the PO number and click on Post goods issue, but system is giving error message
Please select header line(s) or reservation(s)
Message no. ME152
but which is the this header line or reservation i have not found reservation number in ME2O screen in our system.
regards,
zafar

Solution for no mms/sms with iPhone 4s?

Just got my iPhone 4s and realized I am only able to send iMessage. SMS looks like it goes thru but they never get it. MMS won't send at all.
I see others have this same issue, but I haven't seen one post saying they found a resolution other than a few who said it mysteriously started working a few hours later again.
Anyone have suggestions? I already restored the phone, checked all my settings, etc. Tomorrow I'll go into the Apple store, but I'd love to fix it before then. Thanks!

Mine is a 16GB white iPhone and I have the same issue. I'm able to send MMS but can not receive them.
Tried my sim in a black iPhone 4s and I can receive them.
The issue is with my iPhone and not with the sim/carrier.
All the settings were the same on the black version as it is on my white. I've even restored to a factory vanilla version of the software to rule out anything I may have installed/set/unset, but still no joy.

Solution for loss of DHCP with Win7 Home Group issues with FIOS Router

Apparently the FIOS Router (Westell 9100 in my case) doesn't like the IPv6 that Homegroup uses. I lost DHCP service on all three computers that have Win7 installed. I could manually set the IPv4 addresses in the Network Connector options on my computer and every thing worked fine. If I tried to use DHCP for IPv4 I wound up with a private network address (169.xxx.xxx.xxx).
DHCP for IPv4 worked fine adfter I disable IPv6 and the associated topology services. I also removed the HomeGroup option from our network setup.
If you want to use home group be prepared to manually set the IPv4 addresses in your network devices.
Good luck

Interesting, thanks for posting.
Are these Windows 7 PCs that you installed 7 onto yourself, or ones that came with it? I have an HP laptop that came with Windows 7 already installed, no issues at all about IPv6 that I know of. IPv6 is still activated, works just fine on my FiOS Actiontec router, but maybe the Westell is just enough different to be sensitive to that.
Strange.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

A temporary solution for issue of excel sheet for SO_NEW_DOCUMENT_ATT_SEND_

Hi,
we all sometime or the other have faced the problem with SO_NEW_DOCUMENT_ATT_SEND_API1, it passes all the data into a single excel sheet. the following is the code i have written using the same standard FM to resolve the issue.
Problem's Facing     : To send the output of a report as mail attachment (Excel sheet) from SAP, to the User's outlook or TCP/IP
What is happening     : All the data which is being passed to the excel is being put in a single cell of the excel sheet.
Cause               : the difficulty lies in getting the internal table from SAP report, passing it to email Function Module If the structure of the internal Table is unknown .
Solution:
if the user while sending data to the Function module ( created using the following code) puts a '#' between field values, all the fields gets separated into individual cells and the data gets printed as required.
<b>advantages</b> of the following code are:
1) User just need to type userid or multiple userid's separated by comma.
2) Performs multiple tasks with one function module.
3) It can be used to send file with subject only
4) It can be used to send file with subject and body
5) It can be used to send file with subject, body, and attachment
6) Attachment can be of 'TXT' format or 'XLS' format depending upon the choice of the user.
7) User specific parameters for EMAILID, subject, body and attachment type avoiding the dump error of "Type conflict"
8) If the user requires to send output of a report as an excel file, then a single internal table will store the total output separating the field values by ' # ' and the data gets printed evenly. the ' # ' symbol is used as Tab delimiter.
FUNCTION zemail_attachment.
""Local Interface:
*" IMPORTING
*"     REFERENCE(EMAILID)
*"     REFERENCE(SUBJECT)
*"     REFERENCE(ATYPE)
*" TABLES
*"      ATTACH_FILE STRUCTURE SOLISTI1
*"      BODY OPTIONAL
*" EXCEPTIONS
*"      INCORRECT_PARAMETERS
This table requires information about how the data in the
tables OBJECT_HEADER, CONTENTS_BIN and CONTENTS_TXT are
to be distributed to the documents and its attachments.
DATA it_objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
This table must contain the summarized data dependent on each object type.
SAPscript objects store information here about forms and styles,
for example. Excel list viewer objects store the number of rows and columns
amongst other things and PC objects store their original file name.
DATA it_objhead LIKE solisti1   OCCURS 1 WITH HEADER LINE.
This table must contain the summarized content of the objects identified as binary objects.
DATA   it_objbin TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                 WITH HEADER LINE.
This table must contain the summarized content of the objects identified as ASCII objects.
DATA it_objtxt LIKE solisti1   OCCURS 10 WITH HEADER LINE.
This table must contain the document recipients.
DATA it_reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE .
This structure must contain the attributes of the document to be sent.
DATA: doc_ching LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
Create the internal table for body , subject
DATA: it_body LIKE solisti1 OCCURS 10 WITH HEADER LINE.
*creation of internal table for Email-id.
DATA: BEGIN OF it_mailid OCCURS 0,
        email LIKE kna1-name1 ,
        END OF it_mailid.
*VARIABLES
DATA : v_hash(1) TYPE c VALUE '#'.
DATA: v_string1 LIKE kna1-name1,
        v_string2 LIKE kna1-name1,
        v_string3(12) TYPE c VALUE '@GMAIL.COM'.
*CONSATNTS
CONSTANTS: c_con_cret TYPE c VALUE cl_abap_char_utilities=>horizontal_tab,
             c_con_tab TYPE c VALUE cl_abap_char_utilities=>cr_lf,
             c_raw(3)   TYPE c VALUE 'RAW',
             c_comma(1) TYPE c VALUE ',',
             c_rec_type(1) TYPE c VALUE 'U',
             c_space(1)    TYPE c VALUE ''.
Move Body to Internal Table (body into it_body)
LOOP AT body .
    MOVE body TO it_body .
    APPEND it_body .
ENDLOOP.
doc_ching-obj_descr = subject.   "Subject of the Email
Move the Subject and Body to OBJTXT
it_objtxt[] = it_body[].
DESCRIBE TABLE it_objtxt LINES tab_lines.
READ TABLE it_objtxt INDEX tab_lines.
doc_ching-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_objtxt ).
CLEAR it_objpack-transf_bin.
it_objpack-head_start = 1.
it_objpack-head_num   = 0.
it_objpack-body_start = 1.
it_objpack-body_num   = tab_lines.
it_objpack-doc_type   = c_raw.
APPEND it_objpack.
Convert to Excel format
IF NOT attach_file[] IS INITIAL.
IF atype IS INITIAL.
RAISE INCORRECT_PARAMETERS.
ELSEIF atype = 'XLS' .
    LOOP AT attach_file .
      CONCATENATE attach_file v_hash INTO attach_file.
      REPLACE ALL OCCURRENCES OF v_hash IN attach_file WITH c_con_cret.
      IF sy-tabix = 1.
        MOVE attach_file TO it_objbin.
      ELSE.
        CONCATENATE c_con_tab attach_file INTO it_objbin.
      ENDIF.
      APPEND it_objbin.
    ENDLOOP.
ELSEIF atype = 'TXT' .
Convert to Text format
    LOOP AT attach_file .
      REPLACE ALL OCCURRENCES OF v_hash IN attach_file WITH c_con_cret.
      CONCATENATE attach_file c_con_tab INTO it_objbin .
      APPEND it_objbin .
    ENDLOOP.
ENDIF.
DESCRIBE TABLE it_objbin LINES tab_lines.
it_objhead = subject. APPEND it_objhead.
Creating the entry for the compressed attachment
it_objpack-transf_bin = 'X'.
it_objpack-head_start = 1.
it_objpack-head_num   = 1.
it_objpack-body_start = 1.
it_objpack-body_num   = tab_lines.
*check for XLS ,TXT files
IF atype = 'XLS'.
    it_objpack-doc_type   = atype.
ELSEIF atype = 'TXT'.
    it_objpack-doc_type   = c_raw.
ENDIF.
it_objpack-obj_name   = 'ATTACHMENT'.
it_objpack-obj_descr = 'ATTACHMENT'. "Attachment File Name
it_objpack-doc_size   = tab_lines * 255.
APPEND it_objpack..
ENDIF.
Entering names in the distribution list
Concatenating the email with '@GMAIL.COM if the user doesnot specify any mail extension
recipent type as U - for internet usage
SPLIT emailid AT c_comma INTO TABLE it_mailid.
APPEND it_mailid.
LOOP AT it_mailid.
    SHIFT it_mailid-email LEFT DELETING LEADING c_space.
    SPLIT it_mailid-email AT '@' INTO: v_string1 v_string2.
    IF v_string2 IS INITIAL AND NOT it_mailid-email IS INITIAL.
      CONCATENATE v_string1 v_string3 INTO it_reclist-receiver.
      it_reclist-rec_type = c_rec_type.
      APPEND it_reclist.
      CLEAR: v_string1,v_string2.
    ELSE.
      it_reclist-receiver = it_mailid-email.
      it_reclist-rec_type = c_rec_type.
      APPEND it_reclist.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_ching
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack
      object_header              = it_objhead
      contents_bin               = it_objbin
      contents_txt               = it_objtxt
      receivers                  = it_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
ENDFUNCTION.
If anyone, has a better solution, please share
Cheers
Ajay

issue resolved

Solution for backing up iphone itunes 10.5

in the thread
https://discussions.apple.com/thread/2528336?start=15&tstart=0
they have the probelem with seeing a backup option when syncing or right clicking on the name of the device. while the command line works for some people running itunes 9.2 , it doesnt work for running itunes 10 or for mac users. the easiest solution to this is to download a program called backoff for mac or windows. simply quit itunes, and click the toggle off, then back on again.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if the problem has been resolved.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Is there a solution for poor sound quality with ios7.03?

Hi all,
After waiting for a while and using 7.0.2 on my iPad I decided to upgrade my iPhone today. 7.0.3 was installed and while I am used to the general operation of the new iOS, I found that sound quality is terrible. The audio is extremely compressed. This was not an issue with 7.0.2. Unfortunately I also updated my 7.0.2 iPad to 7.0.3 and have confirmed that the latest iOS is at fault. Somebody really messed up.
Is it possible that I am missing a setting somewhere that was added with the latest update?

Never mind. After testing with my android tablet I found it was the headphones. They are Bose QC 15. The original battery was running down but work great yesterday. I suspected the battery and changed it but the problem persisted which led me to blame the upgrade. I should have known better. My apple devices have been flawless. Sorry for crying wolf...

Solutions for issues on iPhones with firmware 3.0

Similar Messages

Maybe you are looking for