Solutions for processing images in LR, then printing as cards through ID?

Hello,
Might anyone have experience with processing photographs in LR CC, then printing from ID CC through an inkjet printer? I thought it wouldn't be such a big deal, but am finding my colors are not holding true. What I see in Lightroom is nice on screen and if I print a single card through LR it looks nice. Export the same image as a tif or jpg and print it on the same paper stock through InDesign and the image is not correct. I am selecting the same color profile for the paper stock in each program. Somewhere I am overlooking a detail or two that really matters. Might anyone have a short list of items I must coordinate or synchronize between the two applications?
John

7. Feb 16, 2012 6:05 PM (in response to b_gossweiler)
Re: Preference for Processing RAW in LR or PS Camera Raw
In any event even if you choose to edit the original in PS, as I believe you should be able to do you will still end up with a Tiff, PSD or jpeg file when you have finished your work in PS. Then why are you using Lightroom? This will have a bearing on the advice you will get.
Like I said above, LR and PS both serve specific functions, and yes they do overlap in some areas, and I yes do use both in my workflow. PS isn't a cataloging program. LR doens't have layers and sucks at complex editing tasks. There's 2 reasons i use both, amoung many many others.
The point of my question is that i don't want LR creating and saving PSD files on my hard drive when i don't need a PSD of that specific photo. You use to be able to make LR open a raw file in PS and use ACR to processs it. That meant you could close the raw file in Photoshop, and nowhere along the way was a PSD file, or any other file saved.

Similar Messages

New shuffle plays for about 15 seconds and then turns off even through it's charged

brand new shuffle plays for about 15 seconds and then turns off even through it's charged. 3rd one I've had that does this

Double check to make sure the headphones are plugged ALL the way in, meaning no silver can still be seen from the headphone's plug.
B-rock

MX711 - Prints fine for the first few jobs then prints with no ink

Pixma MX711
- Prints fine for the first few jobs
then after 10 minutes or so it prints but no ink is on the page.
I replaced the ink cartridges and did all the nozzle clean, priming, alignment etc.
Questions.
1. What is the process to do a factory reset?
2. Any other troubleshooting steps I can do myself?

Hi tda43,
Performing a factory reset of the printer will likely not resolve the issue of the inks not printing; however, you can perform the following steps to reset the settings of the printer:
1. Press the MENU button.
2. Select SETUP, then press the OK button.
3. Select DEVICE SETTINGS, then press the OK button.
4. Use the arrow buttons to select RESET SETTING, then press the OK button.
5. Use the arrow buttons to select SETTINGS ONLY, then press the OK button.
6. Press the HOME button to return to the main menu after the settings have been reset.
When inks do not print correctly, we recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to print. If you still experience difficulty, the printer will require servicing. Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Is there any solution for poor image quality and l...

Hi! friends.I have bouht new E51.Its image quality taken from camera is poor.Although image resolution is high but low quality of camera is main problem.Is there any solution to improve image quality or any software to improve?
Also ringing tone is so much low.Is there bany solution to increase its ringing sound or ny software?

Never mind. After testing with my android tablet I found it was the headphones. They are Bose QC 15. The original battery was running down but work great yesterday. I suspected the battery and changed it but the problem persisted which led me to blame the upgrade. I should have known better. My apple devices have been flawless. Sorry for crying wolf...

Looking for a Hi Res solution for viewing images and for capturing video

We are looking to complete some training videos that utilize a microscope, a Sony Firewire camera (1/3-inch Progressive Scan Color CCD 1024x768 Pixel Array). I want to capture the video on a macbook (imovie or FCE) and be able to make some training DVDs.
In addition, I need to purchase a monitor (cinema display??) that would allow people to view the manipulation from the microscope.
Whay type of setup am I looking at ? Will the Apple Cinema display work for this and give a hi res image on it?
I am not familar with the displays or the desired setup (the video out on the macbook be acceptable as the video comes in from the camera or does the camera go directly to the monitor?
ny insight would be appreciative. Thank you

Hi jforsberg,
What we need to know is that microscope have a video out or practically you use the Sony to capture the video thru microscope using custom tripod or camera holder?
If using you Sony is the case, then you can use iMovie for that, and you can view it "live" while you capture (import) it by selecting the input menu to your sony like shown here by EZJIM:
http://discussions.apple.com/thread.jspa?threadID=1091996&tstart=25
And you can mirror the screen from macbook to bigger external screen using mini DVI adapter. There are three option mini dvi to vga, mini dvi to dvi, and mini dvi to video, and if you want to use apple cinema display I believe you have to buy the mini dvi to dvi.
And apple said that macbook can drive up to 23" cinema display with 1440 x 900 resolution, but other user on macbook forum reportedly can use with other bigger screen and bigger resolution as well.
Best way is you visit apple store and buy that adapter and have it tested with both 23" and 30" (I believe apple guy won't mind considering you are a potential cinema display buyer).
Good Luck.

Anyone have a solution for the ubiquitous problem of the printer not recognizing a new HP cartridge?

I have seen other posts about the HP printers not recognizing that a new HP cartridge has been put in. At the price of the cartridges, this is a most irritating problem, and apparently a weak spot with the HP printers. Mine is not heavily used at all and this is the 2nd time it would not recognize. Thanks.

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Custom Sizes for processing images

I am used to using Dr.Brown's Image Processor,
You simply request a size of image you want
from your RAW files and voila there it is. It seems
there are only canned sizes that I can process an
image to from my RAW files. Is this true or am I
missing the obvious (like usual)?
Peter

That's really a bummer, Imagine a 20000 images per year you want processed from
RAW directly to a 1280x1280 jpeg (because your editor insists) for preview,
Has anyone tried using Dr. Brown's Image processor for CS2,
Chris Cox, will Dr. Brown have java script for this purpose soon?
Peter

Print driver solution for a panasonic workio DP-8035 printer/copier/fax

I need to print at my office from a networked DP-8035 panasonic printer, the print driver from panasonic's web site only supports 10.5, I am using 10.6.6, the driver won't even open! the installer crashes when I try to open it. Help Please.

Looking at the specs for the DP-8035 the PCL and Postscript print kits are options. If your copier is only using the default GDI printer kit, then you may not be able to print from the Mac directly to the copier.
If the copier does have the Postscript kit then you will be able to use the Generic Postscript driver included with OS X. If it has the PCL kit and not the Postscript then you can use the Generic PCL Laser driver included with OS X.

Did Oracle find any solution for caputuring images into form todate ?

Very strange oracle still dont have any java bean or some kind of thing to capture images through webcam and load it to form.
Any Suggestions
Thanks
asp

Hi there,
I have a form which has over 150 fields (from 4 tables). I have used a tab-canvas form to handle all the input - 2 screens for the fields from the first table and 1 screen each for the remaining 3 tables. I can navigate between the tabs without trouble. When everything is done, the contents of the screens are saved to the database via a menu item. Most of the fields are database items.
My point is that Oracle Form has no problems in handling
such processing and I am only using its normal default capabilities.
What type of canvas are you using? There should be no reason to use buttons to navigate betweeen screens if you are using a tab-canvas form. You should not have to use PL/SQL table to handle the data if the fields are normal database columns.
Regards,
John

White background of image created in Photoshop prints as grey through iPhoto postal ordering service.

I have created an image in Photoshop with a white background (I stuck with the default white background that the new image gave me). Over the top of this, I placed some images, saved it as a JPG, imported it into iPhoto and ordered it as a postcard-sized picture.
When I received it in the post, the whole image had printed with a grey overtone: the white background was in fact grey, and the pictures over the top were darker.
How can I resolve this to print my image with a truly white background through iPhoto's ordering service?
Many thanks,
Adam

If unchecking the scene-referred profiles box clears the display problem in Photoshop, you most likely have hit a known bug with defective monitor profiling packages building defective monitor profiles that affect Photoshop and After Effects — specifically, the defective profile is erroneously marked as "scene referred."
Version 4 ICC Profiles: If your are using v4 printing profiles, try Googling for more information...some symptoms of this bug are Photoshop prints a light cyan or blue in the page white areas. The Fix is to use Version 2 printer profiles.
there is another old known issue that has to do with trying to Hard Proof simulate press conditions (printing cyan in whites) but i am not sure what you are trying and i can't recall it right now
if those aren't it upload these screenshots of your workflow:
show full Photoshop window including zoom% and Docuent Profile in lower left corner

Error message: Insufficient data for an image

I'm using Adobe Reader 11.0.06 on my MacBook Pro, OS X 10.9.2.
I recieved 29 pdf files from my university, most of which printed without problem. But three of the files get five or six pages into the document then flash a "Insufficient data for an image" and the pages print, either blank or with three thumbnail pictures in a row.
I went into the preference file for page display and set the Zoom to fit page. I also tried reducing the zoom factor. but nothing works so far.
Any suggestions?
Thank you
Ric

See http://forums.adobe.com/thread/1408375

Disable link for a Image in Content editor web part

Hi
i want to disable hyperlink for a banner added using content editor web part. Instead of hiding using Target Audience, i want to disable the link.
Please help me how can i achieve this?
regards,
Vinay
Thanks and Regards, vinnu

Hi Vinay,
I recommend to disable the link for an image using Jquery in Content Editor web part.
First, you need to use F12 tool in Internet Explorer(IE) to get the html tag for the image, and you’d better find the class or id value for the tag of the image.
For example, if the class for the image is test, then the code should be:
<script type="text/javascript" src="http://code.jquery.com/jquery-1.8.2.js"></script>
<script type="text/javascript">
$('.test').click(function(e) {
e.preventDefault();
</script>
You can also paste the code of the image here for further research.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SOLUTION FOR 3110 RESTARTING!!

Finaly I hawe hawe found the solution for restarting problem!
1.Format your memory card
2.Make shortcut on your mobile so u can access very fast to your media player
2.1. In SETTINGS/DISPLAY/ACTIVE STANDBY/ACTIVE STANDBY MODE (TURN ON)/PERSONALIZE VIEW (MAKE IT THAT SHORTCUT BAR IS THE ONLY ONE THERE)
2.2. In SETTINGS/MY SHORTSUTS/NAVIGATION KEY make it so that standby key is 2nd
2.3. Get back to main screen and press DOWN key,options, select, select media player, and save, in organise shortcuts make it 1st and save your progress
3.Upload up to 5 songs
4. Update your media player, mobile will restart him self! BUT!!!...
5. In order to stop restarting u have 3 sec to start updating music library again
6. If u done all at step 2, u need to press fast one time down,central button,left blue line,down,central,up, and central (Need to be pressed in 3 seconds)
7. If u success in this 6th step u hawe solwed problem!
8. Next step is to upload next 5 songs and repeat steps 4-6
(9.) If you cant press so fast buttons to restart uploading I suggest to create a folder named "Amp3" so he can be first when u access to your memoru card so you could
erase him fast to stop restarting, instead formating whole card (In SETTINGS/MY SHORTSUTS/LEFT SELECTION KEY(Make it Gallery, so you can access fast to memory card to delete folder "Amp3"))
(10.)Buttons to erase "Amp3" folder - While in main screen press : Left blue line,center,left blue line,down,center,center (Need to be pressed in 3 seconds)
(11.)You hawe stopped restarting and kept pics, and images on memory card
If this work at your phone just tell me because I would like to know did i helped
[email protected]

You may want to try this:
1. Backup iPad
2. Setup iPad as new. Settings>General>Reset>Erase all content and settings
3. Test iPad thoroughly
4. If everything is fine, restore backup to iPad

Industry specific verticle for Process Industry

We have implemented MySAP ECC 6.00 in our company. Our company produces BOPP Film. We have implemented 6 modules FI,CO,PP,MM,SD and QM. In PP modules we stuck because of width. I want to ask whether there is any industry specific solution for Process Industry?
Sudhir

Hi Sandeep,
Thanks for your prompt reply.
I will explain you in detail.
Our Company was started in 1980 to manufacture Bi-axially Oriented Polypropylene Films (BOPP) for the first time in India. Since inception we have maintained market leadership in the Indian market and also Continues to be largest BOPP film exporter from the Country. .
In 1996 we have implemented AVALON erp. The implementor was TCS Hyderabad. Presently also it is running very fine but due to technical cnstraints, we decided to switch over to SAP.
We are in process of implemening MySAP ECC6.00. Implementor is WIPRO. As our company is a Continious process industry we expect to implent the PPPI module.
As far as our process is concerned first stage to produce a JUMBO roll. The width may be 1000 mm. Further these Jumbo rolls are slitted as per requirement from customer. Here the width part plays a major roll. The requirement from customer is in any width right from 64 mm to 500 MM. Let us say our product code is xyz with various width. Our main requirement is widthwise stock and widthwise costing. We do not want to incorporate the width in itemcode. How can this problem will be solved?
Waiting for a feseable solution.
Thanks Sudhir

I have tried to order a photo book. Both times it uploaded images etc and then after payment details a message pops up saying this album couldn't be processed. Please try again. Has anyone else experienced this? Can the photo books be printed in store?

I have tried to order a photo book. Both times it uploaded images etc and then after payment details a message pops up saying this album couldn't be processed. Please try again. Has anyone else experienced this? Can the photo books be printed in store?

Your screenshot is not visible.
Anyhow, try a different browser. What were you using?
Firefox is known to work well with the download manager when other browers fail.

Solutions for processing images in LR, then printing as cards through ID?

Similar Messages

Maybe you are looking for