[SOLV]PulseAudio - Simultaneous Output works until I close pavucontrol
Hello,
I'm having a odd issue....
I just installed PulseAudio on my machine (Avoided it for so long, still prefer just plain ALSA) and I'm using a ALSA backend. I installed it for the need to simultaneously output my system audio to my headphones and my speakers at the same time. Everything seems to be all right except for when I play Minecraft or WoW... Those are the two things I notice it with most. Haven't tried anything else. But, unless pavucontrol is running minimized in the background, or just open in general... Simultaneous output is VERY choppy on those apps. Switching back to a single output works just fine. But I'd very much rather use the simultaneous output...
I've been searching for the better part of yesterday to figure out why having pavucontrol open in the background would truly make a difference. I was hoping you guys over here that may have some PulseAudio experience to give me a helping hand.
I'm not exactly sure what configs to post... but here's my daemon.conf. I can post anything needed.
Any support would be appreciated.
Thanks,
Matt
EDIT: Marked at [SOLV]... [ED] Wouldn't fit.
Last edited by themattbeballin (2012-04-12 18:00:27)
Looking further into the issue this morning... It seems to be a problem with the timer based scheduler...
I disabled the scheduler using tsched=0 and now those apps work fine, except for the helicopter-like noise that it's producing now.
Any ideas how to fix that?
Similar Messages
-
Firefox is crashing when I attempt to download a file. Everything works until I close Firefox and then attempt to re-open the browser then it crashes. I tried deleting the download file in my profile folder but it didn't work.
Downgrade to an older nightly that works for a week or so, then test again to see if the bug's still there. In the mean time, report the bug on Bugzilla if it hasn't already been. There's really nothing you can do about bugs in nightlies.
(A similar sort of bug that triggered 60 seconds after opening, every time, was what got me out of using nightlies as my main browser.) -
[SOLVED] PulseAudio wrong output balance at startup
Hello,
I'm using GNOME 3.2 with PulseAudio. PulseAudio sets my audio output balance to 90% right channel each time. restarting it does not help.
Any ideas?
I'll be happy to supply any logs needed if you point me to them. I've made no changes to any of the files at /etc/pulse.
amixer -c0:
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 37 [58%] [9.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [0.40dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 13 [20%] [-51.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 1 [33%] [10.00dB]
Front Right: 1 [33%] [10.00dB]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 16 [35%] [0.00dB] [on]
Front Right: Capture 16 [35%] [0.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Rear Mic' 'Front Mic' 'Line'
Item0: 'Front Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Rear Mic' 'Front Mic' 'Line'
Item0: 'Rear Mic'
Simple mixer control 'Rear Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Rear Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Last edited by elik (2012-02-17 09:02:45)apparently just deleting the configuration directory ~/.pulse and restarting solves the issue.
-
Firefox 3.6.13
Sync 1.6.3
One PC is Win7, the other XPsp3.
Problem is happening on both.
Forced to setup sync each time I start the browser.Follow the instructions to uninstall then reinstall the Flash plugin then restart the Mac(s).
http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
Help for deleting Flash cookies. http://hints.macworld.com/article.php?story=20091114062050800 -
Please help me in this regards.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.
Which TV do you have.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it. -
Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.
It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again. -
I am running WIndows7. I boot up load itunes and it runs fine.. all aspects.
When I close it down and try to get back in later it just sits there. It won't work until I reboot the computer.
I have updated and reloaded several times. NothingLet's see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, make sure you do this below to prevent same problem after restarting windows:
Go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows. -
When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website.pop up blocker off & in safe mode. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work
O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons). -
I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
Thanks. -
OS X wifi not working until switch users
My OS X wifi does not work until I switch users. This occurs very intermittently and does not go away until I switch to another user account. I tried ping, nslookup, and dig with terminal. The ping returned "unknown host." The NSLookup does not give any output and neither does dig.
I have tried to flush the DNS cache also but that did not work either. The problem only occurs on that single user account, and does not move to any other account.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
[SOLVED] Mic does not work on Intel ICH8 (rev 3) sound card
Hi, folks.
I cannot get my sound card to record anything, using a built-in microphone. Audio output works just fine, though. I hope someone can help me, I have been banging my head against the wall for some time over this issue...
My laptop is Toshiba Satellite A200-1J0 (PSAE6E-04R036G3). alsamixer settings are fine, I tried supplementing additional options to /etc/modprobe.d/modprobe.conf, but no luck, tried some of the combinations (model=<> position_fix=<>).
When recording sound with gnome-sound-recorder, with Capture set as input, nothing is heard. Skype can't record anything, either. I can't even get the crackling or hissing sound like some users do.
Should I try to get the latest ALSA?
Debug details start from now on:
/etc/modprobe.d/modprobe.conf
options snd-hda-intel index=0 model=3stack position_fix=1
lsmod | grep snd
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_hda_codec_atihdmi 2051 1
snd_seq_midi_event 4452 1 snd_seq_oss
snd_hda_codec_realtek 179240 1
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_hda_intel 18697 1
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 56728 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 13 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_hda_intel,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
lspci (parts of interest)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
alsa-info.sh
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.58
!!Script ran on: Sat Jan 23 20:27:13 UTC 2010
!!Linux Distribution
Arch Linux \r (\n) (\l) DISTRIB_ID=arch
!!DMI Information
Manufacturer: TOSHIBA
Product Name: Satellite A200
!!Kernel Information
Kernel release: 2.6.32-ARCH
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.21
Library version: 1.0.22
Utilities version: 1.0.22
!!Loaded ALSA modules
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc400000 irq 22
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfc010000 irq 17
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
00:1b.0 0403: 8086:284b (rev 03)
Subsystem: 1179:ff00
01:00.1 0403: 1002:aa08
Subsystem: 1002:aa08
!!Modprobe options (Sound related)
snd-hda-intel: index=0 model=3stack position_fix=1
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC268
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0268
Subsystem Id: 0x1179ff02
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x35 0x35]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a11830: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a3093e: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x4016852d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Processing Coefficient: 0x03
Coefficient Index: 0x01
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1d 0x1d]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
Codec: ATI R6xx HDMI
Address: 0
Function Id: 0x1
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 9 Jan 23 19:11 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 12 Jan 23 19:11 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 8 Jan 23 19:11 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Jan 23 19:11 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116, 11 Jan 23 19:11 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 6 Jan 23 21:04 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Jan 23 21:04 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Jan 23 19:11 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 10 Jan 23 19:11 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 3 Jan 23 19:11 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Jan 23 19:11 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Jan 23 19:11 .
drwxr-xr-x 3 root root 280 Jan 23 19:11 ..
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:01:00.1 -> ../controlC1
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfc400000 irq 22'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,1179ff02,00100003 HDA:11c11040,11790001,00100200'
Controls : 21
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 53 [83%] [-11.00dB] [on]
Front Right: Playback 53 [83%] [-11.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'Line In Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 12
Mono:
Front Left: Playback 0 [0%] [-24.00dB] [on]
Front Right: Playback 0 [0%] [-24.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 29 [94%] [27.00dB] [on]
Front Right: Capture 29 [94%] [27.00dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
!!-------Mixer controls for card 1 [HDMI]
Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfc010000 irq 17'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100000'
Controls : 4
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Headphone Playback Volume'
value.0 53
value.1 53
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mic Boost'
value.0 2
value.1 2
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Front Mic Boost'
value.0 2
value.1 2
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Line In Boost'
value.0 0
value.1 0
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -1650
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
value.0 29
value.1 29
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
control.10 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
control.11 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 12'
comment.dbmin -2400
comment.dbmax 0
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.14 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.15 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 64
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
control.20 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
control.21 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 120'
comment.tlv '0000000100000008fffff44800000032'
comment.dbmin -3000
comment.dbmax 3000
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
state.HDMI {
control.1 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.2 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.3 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
--endcollapse--
!!All Loaded Modules
Module
usbhid
hidp
hid
fuse
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
rfcomm
sco
bridge
stp
llc
bnep
l2cap
crc16
coretemp
ipv6
snd_seq_dummy
snd_seq_oss
btusb
joydev
snd_hda_codec_atihdmi
fan
snd_seq_midi_event
bluetooth
snd_hda_codec_realtek
arc4
ecb
snd_seq
snd_hda_intel
iwlagn
snd_seq_device
snd_hda_codec
sdhci_pci
iwlcore
snd_pcm_oss
uvcvideo
omnibook
videodev
snd_mixer_oss
snd_hwdep
pcmcia
tifm_sd
sdhci
snd_pcm
v4l1_compat
snd_timer
psmouse
mac80211
mmc_core
yenta_socket
vboxdrv
snd
cpufreq_powersave
i2c_i801
uhci_hcd
r8169
ehci_hcd
iTCO_wdt
intel_agp
tifm_7xx1
video
rsrc_nonstatic
soundcore
firewire_ohci
agpgart
mii
i2c_core
pcspkr
snd_page_alloc
pcmcia_core
iTCO_vendor_support
led_class
output
usbcore
tifm_core
serio_raw
cfg80211
evdev
cpufreq_conservative
battery
ac
firewire_core
rfkill
crc_itu_t
thermal
button
cpufreq_ondemand
sg
acpi_cpufreq
freq_table
processor
rtc_cmos
rtc_core
rtc_lib
ext3
jbd
mbcache
sr_mod
cdrom
ata_generic
sd_mod
ata_piix
pata_acpi
ahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x13 0x411111f0
0x14 0x99130110
0x15 0x0221101f
0x16 0x411111f0
0x18 0x02a11830
0x19 0x99a3093e
0x1a 0x411111f0
0x1c 0x411111f0
0x1d 0x4016852d
0x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D1/init_pin_configs:
/sys/class/sound/hwC0D1/driver_pin_configs:
/sys/class/sound/hwC0D1/user_pin_configs:
/sys/class/sound/hwC0D1/init_verbs:
/sys/class/sound/hwC1D0/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
!!ALSA/HDA dmesg
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
Bluetooth: L2CAP socket layer initialized
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018b0000
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Bridge firewalling registered
Last edited by teMplaryum (2010-01-26 10:15:18)Hi there!
I had the very same problem with the same soundcard and found this thread.
The problem got solved for me by adding the same line as you have to /etc/modprobe.d/modprobe.conf.
However, I also had to create /etc/modprobe.d/sound.conf and add:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=toshiba power_save=0
Notice the difference on the "model=toshiba" part.
However, my laptop is not a Toshiba, but a Compal IFL90.
I remember that in Ubuntu I needed(a long time ago) to add a line to /etc/alsa.conf with model=toshiba. I figured it might be worth a try, and well, it did.
I hope this can help someone else.
As for the OP: "You have my thanks!" -
I am working on some books that I have had no problem creating in Indesign and this week, I was doing something and got an error message and had the program crash while I was working on something and lose my unsaved work. It happens all of a sudden and has been frustrating. Thought it was an installation issue, but this also happens on the newest version of CS6.
The original files (“books”) were created in CS4.
What I’m doing is copying a template for the appendix that was established in the first book into all subsequent books.
Here is the process that I used on CS4 for the first 10 books –
1. open a file that already has the completed new appendix.
2. Open a file that needs the new appendix
3. Select the appendix pages from the pages menu in the completed file and “move” them to the new file.
4. Voila!
When I started using CS5 this worked for one book. Now the last book is giving me an error message during step 3. So, I select the pages I want to move and click “move” and then I get a message that says “the program has unexpectedly stopped working and will close”. This is the same message I got with CS6.Same problem here. Firefox keeps freezing, sometimes for 5 minutes, then either starts working again really slowly or I get the plug-in error crash. This last time I copied what windows said about the error. This is the info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 1.9.2.3814
Application Timestamp: 4c12b3be
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c0000005
Exception Offset: 00048b02
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: ca4b
Additional Information 2: 0db6cc4f646c2246ddf8a462e3add7af
Additional Information 3: 5b21
Additional Information 4: e5b7e758762c24b02e09abea0b4585f4
Don't know what it means or if it will help solve the issue, but thought I would share it.
All I know is that I am about to do something I never thought I would, switch to Chrome. -
External Speakers Randomly Stop Working until I "Test" or Disable/Enable
I'm using a HP Pavillion DV6 Notebook PC Running Windows 7 Professional 64-bit SP1.
External speakers randomly stop working until I "test" or disable/enable them. Headphone/HDMI Audio Works.
Background
-Recently had to do a clean install of windows.
-Went to the HP Drivers Website and downloaded all of the latest drivers.
-I installed several other programs as well (Flash, Steam, Media Player, Browser)
-The problem started
Current Settings
-My deafult device is "Speakers and Headphones: IDT High Definition Audio CODEC"
-Enhancements are disabled
-Bass and Treble are set to 4
-Format is set to 16 bit, 48000 Hz (DVD Quality)
-Allowing applications to take exclusive control of the device or not doesn't make a difference (but it's currently off)
Troubleshooting
-The audio works by plugging in headphones or using an HDMI device
-The audio comes back if I go to my sound settings and hit "Test", or if I disable and re-enable the device
Error Messages
-Youtube starts the video for 3 seconds, restarts and sputters a bit, and then says that there was an error
-My media player (MusicBee) gives me this message: "Unable to start playback (Error = BASS_ERROR_BUFLOST)"
That's everything I can think of. Any ideas?Hi TheBigBoy,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a frustrating time with the sound to your external speakers. Have you tried connecting the speakers to another computer to see if is a hardware issue with the speakers? Do the regular speakers work? What is your product number as there are several models in the dv6 series?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
[SOLVED] PulseAudio doesn't detect HDA Intel, only HDA NVidia
Hi,
I get sound only through my monitor (DP - HDA Nvidia), my external speakers or headphones (HDA Intel) are not recognized by PulseAudio. Both worked in the past, I don't know what broke it.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
but in pacmd "list-cards" shows only NVidia...
I do not have ~/.asound.conf, but I do have /etc/asound.conf (I never changed this):
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
Also, when I do "pulseaudio --kill" it seems to restart automatically and journalctl -f shows "[pulseaudio] pid.c: Daemon already running."...
If you need any more info on this, I'll provide it as soon as possible...
Thanks!
Last edited by predmijat (2015-04-27 18:17:53)Here, I dug up an old file I have kicking around.
Put it in /etc/modprobe.d/alsa.conf
Name it anything you want instead of "alsa.conf" as long as the file name ends in ".conf"
options snd_hda_intel enable=1,0 vid=8086,10de pid=3b56,0bea
options snd_hda_intel index=0 vid=8086 pid=3b56
The VID and PID numbers are from my hardware. You will have to replace them from your hardware. Do:
lspci -nn | grep -i audio
And you will see both your on-board and nVidia audio devices. Look for [xxxx:xxxx] in the listing. The first xxxx is your VID - vendor, and the second xxxx is your PID - product/part.
In the "enable=1,0" line put the two VID's first with you on-board being the first VID and then put your two PID's with your on-board being the first PID. Then in the "index=0" line put your on-board VID and PID.
This will disable the nVidia audio and just enable your on-board audio. It will explicitly set your on-board audio to be the first audio device on your system. This will fix a race condition.
Remember, you must put in the appropriate VID and PID's for your specific hardware.
PulseAudio builds on top of ALSA so you are configuring your ALSA devices at a lower level before Pulse starts and when Pulse starts it adds its layer on top of that.
Another assumption is that both audio devices are using snd_hda_intel which is a pretty safe assumption. Use "lsmod" to confirm this.
Maybe you are looking for
-
Itunes U Files No Longer Appearing in the Device in Itunes
I've been using Itunes U files with no problem for a while now but just yesterday something changed. Before I'd drag them into my device like any other file and they would appear in the "music" subfolder of my device. Fair enough. I could listen to t
-
Uploading CSV File into Web Dynpro Java Table and Write back to a Database
Hi Gurus! I would like to upload a csv file and read the content into an UI table element. Then, I need to write the uploaded file back to a database. I'm using NetWeaver 2004s. could you please provide advice for both, uploading and wirting to datab
-
I am tried to do a simple interco elimination in NW 7.5, I have done the following requirment from online help: ■The application must include a dimension of type I, Intercompany. ■The Intercompany dimension must include the property ENTITY, whose val
-
Psexec - problem run regedit.exe under windows 8.1
i just made some stupid things with a registry key under CLSID (win 8.1 32bit): - remove all permission for that key - set owner to "system" .=>result when open that key: "an error preventing this key being opened. Details: Access is denied." and th
-
Help inserting js into dreamweaver cs3
I have been using MS Publisher (yeah I know) to design my web pages but now I am slowly learning Dreamweaver CS3. I am redoing a site within which I have used some forms created with Coffeecup Webform Bilder. It took me a bit to figure out how to ins