Solve This We have tried this for a month with no answer even from National Instruments Tech Support
We have the following devices
*9411
*9215
We
are trying to Trigger an acquisation on 9215 on every Rising and
Falling edge picked up by 9411.The 9411 Picks up pulses from an
encoder which works at 180PPR.So when we have rising and falling edges
per channel we will have 180*2 that is 360 count.Can this be achieved
if so How can this be done in VB6 or C.
All the best
Message Edited by Parikshit on 02-21-2008 11:01 PM
Hi,
Please do not cross-post the same question in different forums: a lot people consider that rude Internet etiquette. We'll continue in this thread:
Solve this it's a challenge
http://forums.ni.com/ni/board/message?board.id=70&message.id=8224
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)
Similar Messages
-
Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng -
Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268 -
I cannot open my Iphoto on my macbook pro. I have used it for three years with no problem. However, after trying to load some pictures from my camera it seems to have frozen up. I force quit it and have not been able to get past the opening blank window since ...cursor still blinking as if it is downloading or trying to open.
What version of iPhoto?
-
I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.
When Microsoft decided not to support Windows Media any more, they made Flip4Mac available for free. If you have not taken advantage of that free download, this might be a good time.
It may not completely solve the problem, but your Mac will play more with the free player. No need to pay for the Upgrades.
http://www.telestream.net/flip4mac/ -
the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.
Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook -
Hello, Why am I getting the following message after I start up my computer: "CAHeadless has encountered an error. [/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/CAHeadless/Make/Mac/../../Src/CAHeadle ss.cpp-683]." Anyone, please solve this for me? Thank you very much!
Hello, Why am I getting the following message after I start up my computer: "CAHeadless has encountered an error. [/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/CAHeadless/Make/Mac/../../Src/CAHeadle ss.cpp-683]." Anyone, please solve this for me? Thank you very much!
-
i have just subscribed for a monthly billing for my acrobat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's, how to i activate my new license?
Can you explain the problem in more detail - "not allowing me to access" isn't clear to me. If you get any errors, please give the full wording. If you just don't seem to have any useful functions under TOOLS, make sure you are NOT still running Adobe Reader.
-
Why am I suddenly getting this message from a page I have been using for 6 months(Error code: sec_error_unknown_issuer) how do I get my page back?
Did you reset Firefox recently?
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
If that is the case then you may have lost intermediate certificates that were stored in the cert8.db file in the Firefox profile folder.
Check out why the site is untrusted (see the Technical details) and if this is caused by a missing intermediate certificate then see if you can install this intermediate certificate from another source.
Some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer.
You can see more Details like intermediate certificates that are used in the Details pane. -
My iphone 4 will switch on and charge, but a lot of the time the screen is frozen (can't slide to switch on or answer calls) I have tried holding for 15secs to reboot but it doesn't clear the problem????
When you say "holding" is it both the sleep switch and the home button until the Apple Logo comes up? If it isn't then I would recomend doing that. If not, turn the phone off and then (while holding the home button) plug it in to iTunes, this will send the phone into recovery mode and will need to be restored from there. Note* this process does have the possibility of losing data if it is not backed up on the computer!!!
-
I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.
Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.
-
Aye need to update my old iphone 8gb its not a 3g phone its the older one to ios4.3 and it won't let me update so aye can't download any apps and aye have tried checking for updates and it says that my iphone is up to date can anyone help?
To identify your iPhone see:
http://support.apple.com/kb/HT3939 -
I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
I have also sent 3 emails to the company if Smart Office 2 with no response.
How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
Zena PartonI have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2. I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
I have also sent 3 emails to the company if Smart Office 2 with no response.
How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
Zena Parton -
Been watching HD TV shows over home WI-FI from remote desktop using Apple TV for a month with my 1080i TV. Tonight getting error on TV, even on recently watched shows, "This content requires HDCP for playback. Either your HDMI cable isn't properly connected, or your HDMI connection doesn't support HDCP. Please reconnect the HDMI cable from your Apple TV to your HDTV and try again". All other media from remote desktop working OK, including 720p movie. WI-FI network running normal at about 4.7 mB/sec. Any ideas? Thanks.
Been watching HD TV shows over home WI-FI from remote desktop using Apple TV for a month with my 1080i TV. Tonight getting error on TV, even on recently watched shows, "This content requires HDCP for playback. Either your HDMI cable isn't properly connected, or your HDMI connection doesn't support HDCP. Please reconnect the HDMI cable from your Apple TV to your HDTV and try again". All other media from remote desktop working OK, including 720p movie. WI-FI network running normal at about 4.7 mB/sec. Any ideas? Thanks.
-
Hi i have tryed looking for my high definition device driver for my acer
Hi i have tryed looking for my high definition device driver for my acer
I have looked on the acar web site and i cant find it at all i am on windows 7 and the updates didn't install it
can some 1 help me find it plz or give me a website to get itYou might want to repost your inquiry to the Acer experts in the
Acer Notebook Support Forum.
Carey Frisch
Maybe you are looking for
-
Hello everyone, after some time working with Lr it wanted to try the web module. But on my main computer it wont load, if I try to switch, a message box appears that an error occured. In the console I find this entry: 2007-08-06 23:55:28.468 Adobe Li
-
I run PrPro CS 4 on Windows XP (after the system crashed too often on VISTA), but admit that I have still to install the latest updates (which might have a fix for my problem). When opening an exisiting project, it happens at times that a window appe
-
User specific default variant in a selectio screen
Is it possible to provide an option to create user specific default variant in a selection screen? I have developed a custom report program. Now I want to allow users to choose one of their variants as default variant ? Please help.
-
hi experts, I have a requirement that my selection screen should have 'ALV LAYOUT' as one of my parameter. I am using PNPCE LDB , now my issue is I can get the layout option when f4 is press on the alv layout parameter but the respective layout is no
-
OIM-How can i set a password policy which does not contain any space?
How can i set a password policy which does not contain any space? I put space at Characters not allowed but it is not working. Can anyone help me out?