[solved] 6 Switched to high resolution mode on CPU 0 ... freezes

This is happening while using Archlinux-i686-2007.08-2.core.iso. Every time I boot the CD, I get this message and it locks up big time (numlock doesn't change LED). It's on a Sempron 2800+ CPU. Not sure what to do from here! What should I try?
Last edited by synthead (2008-01-13 21:59:23)

On a fluke, it decided to work. It's kinda funny ... a couple of days ago, I turned it on out of hope and it booted fine. But for one reason or another I decided to reboot and it never booted for the rest of the night. Then yesterday, I booted it cold again, and it worked again. So I installed it while I had the chance, and now I have a completely functional Arch Linux system.
I built this PC for them a couple years ago when making a cheap computer was the goal ... guess that's what you get for using s--t hardware!

Similar Messages

FaceTime freezes when same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

FaceTime freezes when I call my son's iPad. Calling his iPhone in the same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

Thanks Mario, but I tried everything there before posting my question. I may not have been clear in my question since I accidently recorded the whole question as the title and tried to edit. In brief: I have no trouble connecting with my daughter's iPad or my son's iPhone. However, his iPad is sending much higher resolution pictures and we disconnect after about a minute. Oddly, he can hear and see me while my screen first freezes, then goes black and gives me a message of "reconnecting" until it quits trying and shows the buttons to end or redial. The picture quality difference is what is leading me to believe it is bandwidth related. However, I get anywhere from 5 to 10 MB download speeds; usually closer to 10. Last summer, I had 4 granddaughters on their iPads, a grandson on his gaming device and me on cell phone or pc, all using the bandwidth at once with no complaints. If there is a way to lower his outgoing resolution, I think that would help.

High Resolution Mode no longer works with new vers...

For years I used Skype in high res mode (1280X720) with auto answer to look at the veiw from may vacation house window. This worked great. The picture quality was terrific and the connection was always stable. However, after I upgraded the Skype version on my home windows 8 PC in May, I could only connect at 640X480. I thought the issue was that the mac mini in my vacation house ran a very old version of Skype (on the tiger OS), so I put in a new 2.5GHz core duo processor and upgraded to snow leopard and the latest version of Skype. But this did not help. The only way I could get Hi-Res back was to install old versions of Skype on all my computers. It seems dumb that I have to run old versions of the software, I would really like to run current the versions. Couldn't you add a feature that allows users to overide the system choices and pick the resolution?

Hold Menu + Play/Pause to reboot the box from the main menu.

Macbook pro 17 turns off when switching to high performance mode

Hi guys!
My 2009 Macbook pro 17 turns off and goes dead when switching to "high performance" graphics in the energy saver controll panel.
This happens also when the battery is 100% charged. i must reconnect powersupply to reboot.
The battery is new, from june this year.

Aardal87 wrote:
I have just re installed the system. and the problem continues.
I guess ur solution isnt worth trying on a fresh system install?
It will not do any harm trying it but you are probably correct in these circumstances.
If the symptoms are consistent, then a savvy technician at an Apple store genius bar should be able to define the problem.
Ciao.

[SOLVED]HD Screen very high resolution dimension - small [BUG]

I got a new laptop and of course the first thing I must put on it it's Arch Linux.
It's an Asus N551 and EXTREAMLY WEIRD but everything went fine, I mean everything worked without me doing anything to fix up stuff (yes I had to install bumblebee) but everything, sound, touchpad, graphics, networking, etc just required installing the driver and that's it.
Now the problem is with the display,
xdpyinfo | grep -B2 resolution
screen #0:
dimensions: 1920x1080 pixels (508x285 millimeters)
resolution: 96x96 dots per inch
The resolution is as you see but everything else it's really small and I think I will become blind if I don't fix this.
I'm currently using the intel graphic card.
I read 2-3 topics similar to mine but without any understandble resolution and beeing very old I thought it's better to open a new one.
Thanks.
SOLUTION:
1) Find out your Screen ID (It should show "connected" and "allot of available displays")
]$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 345mm x 194mm
1920x1080 60.02*+
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
So Mine is eDP1
2) Find your screen size in mm
In my case intel and xdpyinfo reported the wrong value, so the right one for me was 345x194 mm
3) Find out your right DPI settings
http://dpi.lv will do this for you.
4) Apply what you found:
cat /etc/X11/xorg.conf.d/90-monitor.conf
Section "Monitor"
Identifier "eDP1"
DisplaySize 345 194
Option "DPI" "141 x 141"
EndSection
stop your DE and startx again
Confirm the settings were applied:
$ xdpyinfo | grep -B1 dot
dimensions: 1920x1080 pixels (345x194 millimeters)
resolution: 141x141 dots per inch
5) Use a DE which will not overwrite your DPI settings (So far , Gnome, Cinnamon, does it).
LXDE won't
xfce4 gives you an option to set your desired DPI so it's also OK.
6) Configure the browsers / or heavy applications NOT to ignore the system DPI settings.
(this is also a looong trail to deal with)....
BUG: https://bugs.freedesktop.org/show_bug.cgi?id=89820
Last edited by r0b0t (2015-03-30 11:25:42)

1- Done
$ cat /etc/X11/xorg.conf.d/90-monitor.conf
Section "Monitor"
Identifier "eDP1"
DisplaySize 345 194
Option "DPI" "141 x 141"
EndSection
And confirmed by xdpyinfo
2)LXDE it is
xfce4 also work if I manually set the dpi to 141 (it supports it).
It's working now.
Will try configure "dpi-resistent" applications.
I will mark the thread as solved but should I open a bug for intel setting
1) Wrong dimension
2) Wrong DPI
This is what's happening: (vanilla configuration , no xorg.conf stuff, no xinitrc)
[ 818.088] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20141121
[ 818.089] (WW) Falling back to old probe method for modesetting
[ 818.089] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 818.089] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
------------------------ SETTING DPI WRONGLY---------------------------------------------
[ 818.089] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 818.089] (==) intel(0): TearFree disabled
[ 818.089] (==) intel(0): DPI set to (96, 96)
[ 818.090] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 818.090] (==) intel(0): Backing store enabled
[ 818.090] (==) intel(0): Silken mouse enabled
[ 818.090] (II) intel(0): HW Cursor enabled
[ 818.090] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. >>>>>>>>>> WHY SHOULD I IGNORE??<<<<<<<<
[ 818.090] (==) intel(0): DPMS enabled
[ 818.090] (==) intel(0): display hotplug detection enabled
[ 818.090] (II) intel(0): [DRI2] Setup complete
[ 818.090] (II) intel(0): [DRI2] DRI driver: i965
[ 818.090] (II) intel(0): [DRI2] VDPAU driver: i965
[ 818.090] (II) intel(0): direct rendering: DRI2 enabled
[ 818.090] (II) intel(0): hardware support for Present enabled
[ 818.090] (--) RandR disabled
[ 818.107] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 818.107] (II) AIGLX: enabled GLX_ARB_create_context
[ 818.107] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 818.107] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 818.107] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 818.107] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 818.107] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 818.107] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 818.107] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 818.107] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 818.107] (II) AIGLX: Loaded and initialized i965
[ 818.107] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 818.109] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 818.122] (II) intel(0): Setting screen physical size to 508 x 285 >>>>>>>>>>>>>>>>> WRONG IT'S 345x194mm<<<<<<<<<<<<<<<<<<<<

How to configure cisco 3650-24ts-s switch in high availability mode

Hi, I bought 2 nos 3650-24ts-s switch with accessories. i have created 10 vlans & given internal access in one switch. Now I need to configure another switch as standby or HA mode so if any thing goes wrong in first switch, second one will take automatic. Pl help to provide me step by step guide for doing the same.thnaks

Depending on license you could have access to setup HSRP between them. Since they aren't stacked switches I would also do a port channel.

Retina 15'' interface lagging in higher resolution

Hello, I have a macbook pro retina 15'' I bought it a month ago, I have a problem when I switch to higher resolution (i.e. 1920px) the interface lags a bit... for example when switching from a virtual desktop to another using the magic mouse. Do you have any solution?

Reset the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

K9N6PGM2 Higher Resolution Display Modes not Available

Hello,
I've updated a computer with a K9N6PGM2, NVIDIA GeFORCE MCP61P + Nforce 430 chipset, motherboard and am having problems with video modes.
Via the control panel window:
Dell 1701FP (analog) on nVidia GeForce 6150SE nForce430
BIOS 5.61.32.25.15
Modes supported 640 X 480, 16 COL Default refresh
Modes supported 800 X 699, 16 COL Default refresh
Driver 5.1.2001.0
The board is not overclocked.
First problem: On the display setting tab only 800 X 600 and 4 bit color are listed as options. This doesn't match the modes supported info.
Second problem: Where are the higher resolution and deeper color modes?
I've read articles about the chipset and they say "VGA" is supported. Does this mean only resolution above the old VGA specification, 640X480 and 800X600? I've used older MSI boards, nForce2 for example, and the higher modes are supported.
On a similar MSI nFORCE board where high resolution is supported the shared VGA memory value was 64k. As an experiment I increased the share on this new board first to 128 then 256k. While resolution and color depth settings are now available selecting them results in an error message indicating the mode selected is invalid.
I'd appreciate any suggestions of where to go from here.
Thanks
Ed

Thanks for the quick reply.
Updated drivers have been installed but no change is apparent. I can change the resolution and color depth settings under "settings" in the monitor tab of display. Same error message, invalid settings. Afterward the expanded rage of settings is replaced by 800X600 only with a color depth of 4 bits.
Additional suggestions appreciated.
Ed

How to fix lost connections to original high-resolution pictures in iPhoto and how to import an iPhoto Book from one iPhoto library to another

Hi there,
I am using a MBP Pro with 8 GB cache and 1 TB HDD from beginning of 2011 with OS X Yosemite and iPhoto version 9.6 (910.29).
I created an iPhoto Book to print which contains my best pictures of 2013 and 2014. Then I got an error message when I wanted to print the book, saying (translated from German):
Book could not be created.
With photo p233432343.jpg there was an error. The original version of that photo with full resolution could not be found or is damaged. Please replace the photo or delete it from your book.
When I enquired further, I found out, that many, many pictures in my iPhoto library have that problem - only the thumbnail picture is found by iPhoto, but not the one with the high resolution. When looking at the photos in detail one sees that they are not sharp because obviously the photo book only refers to the thumbnail. When I went into the iPhoto Library using Finder, I saw that the original high res photos are still there. As there are an estimated 3000 photos with a lost connection (some still have, it but about 1/2 of my photos don´t), it does not make sense to import those photos manually. This photo book is just the tip of the iceberg, so to say.
Then I looked for solutions in some forums. I had two lPhoto libraries, one on my HDD (120GB) and one on an external HDD (175GB). Assuming there might be problems, I have deleted (moved) the one on my HDD, because the "right one" is the one on my external HDD and started iPHoto again using the alt key. But that did not work either.
I then tried to repair my iPhoto library using iPhoto Library Manager, and merged and rebuilt libraries. The library that came out was crap - all folders that had lost connections to the high resolution pictures now have zero photos in it. Also it is lacking the projects, including the photo book I created.
Then I went to find out if there is a way to import the iphoto book project from the old, corrupt library into the new, repaired library but could not find anything. It can only be exported as a file structure or website. As the file structure is missing the high res pictures, that does not even solve the "little" problem of the photobook.
I would REALLY appreciate your help on the two questions:
1- Can you advise what I need to to do to to get the connection to the high resolution photos established again ? As it is more than 3000 photos, I use an automated way of reestablishing that connection. Probably an answer to this question would make question 2 irrelevant.
2- Do you know if there is a way to export and import a book project created in iPhoto from one library to another ?

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

I use high contrast mode (am visually impaired); just upgraded to 8.0. When I open a new tab, the background does not high contrast, showing white until the page loads. Is there a setting that can be adjusted to fix this, or is this permanent?

I use Windows Vista, and I use the default Alt+Shift+PrtScn high contrast mode for white text on a black background. I only notice when I click a link that opens a new tab or open a tab via the mouse wheel that becomes the main tab. I can't switch tabs fast enough if I click a link that doesn't open as the main tab to tell if the problem persists. The duration of the non-high contrast background is only as long as the page takes to load. There does not seem to be much lag, but the lack of high contrast is painful enough that I have to close my eyes, so I'm not sure. On a related note, the new status information does not high contrast either, making it impossible for me to read.

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

Photoshop CC and Audition CC is not compatible with the high resolution and small screen that my computer have.

Hello everyone. Recently I bought the New Razer Blade (2014). It has a high resolution of 3200 x 1800 and a screen size of 14 inch. It is that I downloaded the Photoshop CC that I realize that the words are so small it is actually causing a problem for the users. I searched online for helps and learned that the only way to change this is to wait for the developers of the Photoshop CC to make and update to make it compatible. The source of this idea is from a guy have the same computer and the same problem. He updated his Lightroom and the interface ungraded into one that he can use with ease and he hopes that the Adobe company will update Photoshop CC also and fix the resolution problem too. I thought that after another update, Photoshop CC will have it visual update too. However, the last update from a few days ago didn't solve this problem. I wonder if The Adobe company knows about this problem and that's the main reason I'm starting a discussion on this topic. The same goes to the Audition CC and the Premiere Pro CC. These 3 are the most important tools for my and this computer is the only good one that I can have right now. I have tried lowering my resolution but everything else became difficult to use. If I'm using the Photoshop CC, I of course wouldn't want to use a resolution that is too low to edit my pictures.
This is my problem and I wish someone can do something about the visual updates of Photoshop, Audition, and Premiere Pro so that they are compatible with the New Razer Blade (2014) 14 inch screen. Just like Lightroom.

Hi,
The video features for Windows 32 bit systems are no longer supported starting with Photoshop CC (14.0).
Sorry,
steve

Satellite P200D: How to get higher resolution with HDMI on external monitor

Hi,
i have problem with my notebook P200D. I want to use my book with extern LCD in resolution 1680x1050.
In analog connection i have reached this resolution, but the quality of the output is bad.
I see some waves on the screen of LCD. And colors are little bit different.
Notebook has hdmi output too, so I have bought hdmi/dvi cabel, which is working, but i have reached only the resolution of 1200x1020.
Cabel is signgle link, it exists dual link cabel, but i am not sure if this sloves my problem. I have read that the hdmi output in the Toshiba notebooks is only single link.
So i cant reached higher resolution than 1200x1020... Is it true?

Vlada I do not know what you mean with bad picture but if you can use the right resolution the picture must be simply brilliant. I am afraid you can not set the right resolution (1680 x 1050) and because of that you are not happy with analog connection.
About HDMI usage I can just say that I have tried to connect Qosmio G30 to my HD Ready LCD TV. I have just switched to the TV using FN+F5 key combination, checked graphic card settings and set it to the center. The picture was perfect and I didnt change resolution.
It is very interesting theme and I hope someone else will post own experiences.
Bye and good luck!

Connecting external monitor to G4 at higher resolution than 1024x768

Is this possible? I believe someone told me that there is a way since the graphics card can support higher resolution, just not at the LCD.
I am doing web design and that resolution is becoming cumbersome to work with and my external monitor can go up to 1600x1200.
Thanks.

Yes it is possible, but "at your own risk". Look for "Screen spanning doctor".
If you test it, please report here the maximum resolution you can use in clamshell mode. I am going to buy a monitor and I wasn't able to find such value.
I know I can use 1600x1200, I already did it, but I tried the external monitor as secondary monitor. Could you please test the clamshell mode? can it go over 1600x1200 when the main display is off?

Very high resolution after update

I just finished update after 2-weeks holiday, and... X start it very high resolution: 2048x1536. I have 1024x768 in the /etc/X11/xorg.conf, log shows that this file is used. How it is possible that higher mode is initialized? I use Linux for about 10 years but it's first time I see something like this.
PS. this is probably related to xf86-video-ati update, I use Radeon 9800 Pro.

does it happen in the login page? cuz i have the same problem (my monitor doesnt even show image because of the ress being so high)
but i have a x1650pro so shouldnt be a card problem..

The font size in the menu bar is too small (unreadable). How can I increase font size. I have a new Samsung PC with high resolution screen.

Hi the fnt size in the menu bar is too small (unreadable). How can I increase the font size. I have a new Samsung PC with high resolution screen.

You must mean Photoshop Elements 11, not Photoshop.
There is no ability to change the size of the menu font in PSE 11.
note to mod:
Please move to the Photoshop Elements forum.

[solved] 6 Switched to high resolution mode on CPU 0 ... freezes

Similar Messages

Maybe you are looking for