[Solved] 64b Flash + Vimperator = Sigh

Flashplugin-prerelease (Square) recently stopped working for me in Vimperator. In Chromium, everything works just fine.
Are there any hidden parameters in about:config or anywhere else that could cause this behaviour?
Thank you.
Edit: Fixed it, I had swfdec and swfdec-mozilla installed. These seem to cause problems.
Last edited by Arthenik (2010-10-04 12:57:32)

Thank you for making it clearer!
Mathematicians do not deal with "guesses" So here is some of the information we got:
* Almost all official Arch packages seem to deal correctly with permissions, especially the packages that we need here
* we used root for everything, including installing packages
* no other users were created from the beginning
* so when we create user, permissions will not take care of themselves.
I'm glad you didn't face other problems with other packages so far.. yet there always will be such problems, especially with more packages being installed.
If we were to test this, by deleting the directory, and removing the packages, then installing them again as user, they would work fine.
And if ever installing a package as user, requires user to go and miss with permissions, then it deserves to be fixed in the PKGBUILD (and probably reported as a bug).
When I first started installing Arch, I too (like many others who told me so) have done basically everything as root to setup the OS before using it. Then I forced myself to do it the proper way, and had to learn few more things, and I say it is worth it..

Similar Messages

[SOLVED] Certain Flash sites not working in Firefox 4...

EDIT: Solved in post #15
Using Firefox 4 stable from extra repo, something is up with my Flash where certain sites aren't seeing it, while others are. When it works, it plays fine. Here's some screenshots to illustrate what I mean:
When I start a new session of a Firefox all Youtube videos are in the small window (even when I'm logged in) and the first video I watch, to get it to the bigger window I click the enlarge button as seen: http://i.imgur.com/vmmSF.png
It plays fine in this little window, but when I click that button and it enlarges, it looks like this http://i.imgur.com/4xzoy.png
Sometimes it will play and I can hear the audio while I only have that grey rectangle. Now, I can hit refresh and it will play back fine now on in this larger size, but this does not occur on my laptop with Arch and same packages.
Then Vimeo, nearly all videos are like this http://i.imgur.com/zYkIT.png
And on Break I don't even see anything: http://i.imgur.com/SIkT2.png
Many sites tell me to upgrade my flash. Here is package info I am using just in case:
Name : firefox
Version : 4.0-1
URL : http://www.mozilla.org/projects/firefox
Licenses : MPL GPL LGPL
Groups : None
Provides : None
Depends On : xulrunner=2.0 desktop-file-utils
Optional Deps : None
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 1952.00 K
Packager : Ionut Biru <[email protected]>
Architecture : i686
Build Date : Mon 21 Mar 2011 01:58:57 PM EDT
Install Date : Tue 22 Mar 2011 09:26:54 PM EDT
Install Reason : Explicitly installed
Install Script : Yes
Description : Standalone web browser from mozilla.org
Name : flashplugin
Version : 10.2.153.1-1
URL : http://get.adobe.com/flashplayer
Licenses : custom
Groups : None
Provides : flashplayer
Depends On : mozilla-common libxt gtk2 nss curl
Optional Deps : libvdpau: GPU acceleration on Nvidia card
Required By : None
Conflicts With : None
Replaces : flashplugin-beta
Installed Size : 14224.00 K
Packager : Ionut Biru <[email protected]>
Architecture : i686
Build Date : Tue 22 Mar 2011 06:46:42 AM EDT
Install Date : Tue 22 Mar 2011 09:26:58 PM EDT
Install Reason : Explicitly installed
Install Script : Yes
Description : Adobe Flash Player
I have even removed my profile folder recently and started fresh, but it's still doing this Appreciate any help, thanks folks!
Last edited by colbert (2011-04-17 02:17:44)

Okay, here is the path for my profile:
~/.mozilla/firefox/hov5jr0l.bobbynew
This is the entire pluginreg.dat file:
Generated File. Do not edit.
[HEADER]
Version:0.14:$
Arch:x86-gcc3:$
[PLUGINS]
libnpjp2.so:$
/opt/java/jre/lib/i386/libnpjp2.so:$
:$
1299108618000:1:5:$
The next generation <a href="http://java.sun.com">Java</a> plug-in for Mozilla browsers.:$
Java(TM) Plug-in 1.6.0_24:$
34
0:application/x-java-vm:Java&#153 Plug-in::$
1:application/x-java-applet:Java&#153 Plug-in Applet::$
2:application/x-java-applet;version=1.1:Java&#153 Plug-in::$
3:application/x-java-applet;version=1.1.1:Java&#153 Plug-in::$
4:application/x-java-applet;version=1.1.2:Java&#153 Plug-in::$
5:application/x-java-applet;version=1.1.3:Java&#153 Plug-in::$
6:application/x-java-applet;version=1.2:Java&#153 Plug-in::$
7:application/x-java-applet;version=1.2.1:Java&#153 Plug-in::$
8:application/x-java-applet;version=1.2.2:Java&#153 Plug-in::$
9:application/x-java-applet;version=1.3:Java&#153 Plug-in::$
10:application/x-java-applet;version=1.3.1:Java&#153 Plug-in::$
11:application/x-java-applet;version=1.4:Java&#153 Plug-in::$
12:application/x-java-applet;version=1.4.1:Java&#153 Plug-in::$
13:application/x-java-applet;version=1.4.2:Java&#153 Plug-in::$
14:application/x-java-applet;version=1.5:Java&#153 Plug-in::$
15:application/x-java-applet;version=1.6:Java&#153 Plug-in::$
16:application/x-java-applet;jpi-version=1.6.0_24:Java&#153 Plug-in::$
17:application/x-java-bean:Java&#153 Plug-in JavaBeans::$
18:application/x-java-bean;version=1.1:Java&#153 Plug-in::$
19:application/x-java-bean;version=1.1.1:Java&#153 Plug-in::$
20:application/x-java-bean;version=1.1.2:Java&#153 Plug-in::$
21:application/x-java-bean;version=1.1.3:Java&#153 Plug-in::$
22:application/x-java-bean;version=1.2:Java&#153 Plug-in::$
23:application/x-java-bean;version=1.2.1:Java&#153 Plug-in::$
24:application/x-java-bean;version=1.2.2:Java&#153 Plug-in::$
25:application/x-java-bean;version=1.3:Java&#153 Plug-in::$
26:application/x-java-bean;version=1.3.1:Java&#153 Plug-in::$
27:application/x-java-bean;version=1.4:Java&#153 Plug-in::$
28:application/x-java-bean;version=1.4.1:Java&#153 Plug-in::$
29:application/x-java-bean;version=1.4.2:Java&#153 Plug-in::$
30:application/x-java-bean;version=1.5:Java&#153 Plug-in::$
31:application/x-java-bean;version=1.6:Java&#153 Plug-in::$
32:application/x-java-bean;jpi-version=1.6.0_24:Java&#153 Plug-in::$
33:application/x-java-vm-npruntime:::$
libflashplayer.so:$
/usr/lib/mozilla/plugins/libflashplayer.so:$
:$
1300790802000:1:4:$
Shockwave Flash 9.0 r115:$
Shockwave Flash:$
2
0:application/x-shockwave-flash:Shockwave Flash:swf:$
1:application/futuresplash:FutureSplash Player:spl:$
[INVALID]

How to solve the flash Builder 4.6 scroll view and textinput display problem?

I have a dynamic form application which worked well on flash builder 4.5, having display problems in flash builder 4.6 now. What I did is adding
TextInput objects to a scroll view and set the texts for them dynamically. Everything is fine after the screen loaded. But if I scroll down, sometimes the texts will be placed in wrong positions. I attached the screen copy of the wrong display. Does anybody know how to solve this problem? Thanks.

Check out the two threads below (if you have not already). I have not tried it but aeonus describes an approach that made me think of something that might work ... It is a workaround but, what if you have a text field (txtA) with the skin that does not allow soft keyboard selection, but does scroll correctly, and on the onClick event of that text field, you dynamically cover it with another text field (txtB) that does allow soft keyboard selection, (but does not scroll properly) and trigger the keyboard. After you get the entry from the user, set the value of txtA and destroy txtB ... leaving you (theoretically) with properly scrolling text fields. If you have a lot of those in your app, you might want to write a component that implements that behavior.
"Create a dynamic textfield, and on click, invoke create a StageText instance at the same location as the textfield (by setting the StageText.viewPort property)
Finally, set StageText.softKeyboardType to "numeric" and call StageText.assignFocus();"
http://forums.adobe.com/thread/915019?tstart=0
http://forums.adobe.com/thread/911214?tstart=0

[Solved] mpd + flash(?) = CRASH

When i open some audio|video.flash (ex: youtube) in any browser i have to stopped mpd to get audio.
Ok, but when the video has finished and stopped i can't start again or 'unpause' a song in mpd, i have to close the whole browser and even sometimes restart the mpd daemon
How must i configure my mpd?
I'm using ALSA.
My conf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/ramon/Musica"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/home/ramon/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/home/ramon/.mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/home/ramon/.mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/home/ramon/.mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "ramon"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "localhost"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
# device "/dev/dsp" # optional
# format "44100:16:2" # optional
# mixer_device "/dev/mixer" # optional
# mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
# protocol "icecast2" # optional
# user "source" # optional
# description "My Stream Description" # optional
# genre "jazz" # optional
# public "no" # optional
# timeout "2" # optional
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
# server "remote_server" # optional
# sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Volume control mixer ########################################################
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#mixer_type "hardware"
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
mixer_type "software"
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#mixer_type "disabled"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
id3v1_encoding "ISO-8859-1"
Last edited by teh (2009-10-26 08:28:11)

# ALSA library configuration file
# pre-load the configuration files
@hooks [
func load
files [
"/etc/asound.conf"
"~/.asoundrc"
errors false
# load card-specific configuration files (on request)
cards.@hooks [
func load
files [
@func concat
strings [
{ @func datadir }
"/cards/aliases.conf"
func load_for_all_cards
files [
@func concat
strings [
{ @func datadir }
"/cards/"
{ @func private_string }
".conf"
errors false
# defaults
# show all name hints also for definitions without hint {} section
defaults.namehint.showall off
# show just basic name hints
defaults.namehint.basic on
# show extended name hints
defaults.namehint.extended off
defaults.ctl.card 0
defaults.pcm.card 0
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format "unchanged"
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
# truncate files via file or tee PCM
defaults.pcm.file_format "raw"
defaults.pcm.file_truncate true
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
# PCM interface
# redirect to load-on-demand extended pcm definitions
pcm.cards cards.pcm
pcm.default cards.pcm.default
pcm.front cards.pcm.front
pcm.rear cards.pcm.rear
pcm.center_lfe cards.pcm.center_lfe
pcm.side cards.pcm.side
pcm.surround40 cards.pcm.surround40
pcm.surround41 cards.pcm.surround41
pcm.surround50 cards.pcm.surround50
pcm.surround51 cards.pcm.surround51
pcm.surround71 cards.pcm.surround71
pcm.iec958 cards.pcm.iec958
pcm.spdif iec958
pcm.hdmi cards.pcm.hdmi
pcm.dmix cards.pcm.dmix
pcm.dsnoop cards.pcm.dsnoop
pcm.modem cards.pcm.modem
pcm.phoneline cards.pcm.phoneline
pcm.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
default {
@func refer
name defaults.pcm.card
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
default {
@func refer
name defaults.pcm.device
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
show {
@func refer
name defaults.namehint.extended
description "Direct hardware device without any conversions"
pcm.plughw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_PCM_CARD
ALSA_CARD
default {
@func refer
name defaults.pcm.card
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_PCM_DEVICE
default {
@func refer
name defaults.pcm.device
@args.SUBDEV {
type integer
default {
@func refer
name defaults.pcm.subdevice
type plug
slave.pcm {
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
show {
@func refer
name defaults.namehint.extended
description "Hardware device with all software conversions"
pcm.plug {
@args [ SLAVE ]
@args.SLAVE {
type string
type plug
slave.pcm $SLAVE
pcm.shm {
@args [ SOCKET PCM ]
@args.SOCKET {
type string
@args.PCM {
type string
type shm
server $SOCKET
pcm $PCM
pcm.tee {
@args [ SLAVE FILE FORMAT ]
@args.SLAVE {
type string
@args.FILE {
type string
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
type file
slave.pcm $SLAVE
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
pcm.file {
@args [ FILE FORMAT ]
@args.FILE {
type string
@args.FORMAT {
type string
default {
@func refer
name defaults.pcm.file_format
type file
slave.pcm null
file $FILE
format $FORMAT
truncate {
@func refer
name defaults.pcm.file_truncate
pcm.null {
type null
hint {
show {
@func refer
name defaults.namehint.basic
description "Discard all samples (playback) or generate zero samples (capture)"
# Control interface
ctl.default {
type hw
card {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
default {
@func refer
name defaults.ctl.card
ctl.hw {
@args [ CARD ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_CTL_CARD
ALSA_CARD
default {
@func refer
name defaults.ctl.card
type hw
card $CARD
ctl.shm {
@args [ SOCKET CTL ]
@args.SOCKET {
type string
@args.CTL {
type string
type shm
server $SOCKET
ctl $CTL
# RawMidi interface
rawmidi.default {
type hw
card {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
default {
@func refer
name defaults.rawmidi.card
device {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
default {
@func refer
name defaults.rawmidi.device
rawmidi.hw {
@args [ CARD DEV SUBDEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_RAWMIDI_CARD
ALSA_CARD
default {
@func refer
name defaults.rawmidi.card
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_RAWMIDI_DEVICE
default {
@func refer
name defaults.rawmidi.device
@args.SUBDEV {
type integer
default -1
type hw
card $CARD
device $DEV
subdevice $SUBDEV
hint {
description "Direct rawmidi driver device"
device $DEV
rawmidi.virtual {
@args [ MERGE ]
@args.MERGE {
type string
default 1
type virtual
merge $MERGE
# Sequencer interface
seq.default {
type hw
seq.hw {
type hw
# HwDep interface
hwdep.default {
type hw
card {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
default {
@func refer
name defaults.hwdep.card
device {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
default {
@func refer
name defaults.hwdep.device
hwdep.hw {
@args [ CARD DEV ]
@args.CARD {
type string
default {
@func getenv
vars [
ALSA_HWDEP_CARD
ALSA_CARD
default {
@func refer
name defaults.hwdep.card
@args.DEV {
type integer
default {
@func igetenv
vars [
ALSA_HWDEP_DEVICE
default {
@func refer
name defaults.hwdep.device
type hw
card $CARD
device $DEV
# Timer interface
timer_query.default {
type hw
timer_query.hw {
type hw
timer.default {
type hw
class {
@func refer
name defaults.timer.class
sclass {
@func refer
name defaults.timer.sclass
card {
@func refer
name defaults.timer.card
device {
@func refer
name defaults.timer.device
subdevice {
@func refer
name defaults.timer.subdevice
hint.description "Default direct hardware timer device"
timer.hw {
@args [ CLASS SCLASS CARD DEV SUBDEV ]
@args.CLASS {
type integer
default {
@func refer
name defaults.timer.class
@args.SCLASS {
type integer
default {
@func refer
name defaults.timer.sclass
@args.CARD {
type string
default {
@func refer
name defaults.timer.card
@args.DEV {
type integer
default {
@func refer
name defaults.timer.device
@args.SUBDEV {
type integer
default {
@func refer
name defaults.timer.subdevice
type hw
class $CLASS
sclass $SCLASS
card $CARD
device $DEV
subdevice $SUBDEV

[SOLVED] No Flash in Chromium

Hi,
I know there's another thread on this re: Firefox but I think this is a different problem.
After today's update, flash is no longer working in Chromium. A black box just pops up saying 'missing plug-in'. I'm running x86_64.
I think this is probably due to an update to nspluginwrapper, but I'm not really sure how to get it working again. Any advice?
Many thanks!
Last edited by russ0r (2011-05-03 21:39:25)

I have had the same problem.
I just re-install flashplugin and it solved the problem for me.

I need help solving Latest Flash Player upgrade crashing issues.

I recently upgraded my flash player at Adobe reccomendation. Now it crashes all the time. I need help solving this issue. I currently have Flash Version 11.5.502.135. My old version never crashed, not even once. I would be fine uninstalling the new version and going back to the older one but i cant find it.

Could you please create a crash report? The following page has more information: http://helpx.adobe.com/flash-player/kb/report-flash-player-crash.html
You can install Flash Player 11.4.402.287 version.
Thanks,
Sunil

[Solved]USB Flash Drive inaccessible.

Hi there.
I have installed Arch Linux on my Sony laptop and I have configured it so that most stuff works. The only problem I'm facing now, is that my USB Flash Drive won't show up when I plug it in. I have tried restarting ehci service, but it does not solve anything. I had this problem many years ago with another computer running Linux, but I can't remember how it got solved. Connecting a USB-mouse works perfectly but not a flash drive. The drive is a FAT32 formatted Kingston.
This is my dmesg log:
[ 109.300651] usb 2-1.3: new high-speed USB device number 4 using ehci_hcd
[ 109.613294] Initializing USB Mass Storage driver...
[ 109.613459] scsi7 : usb-storage 2-1.3:1.0
[ 109.613577] usbcore: registered new interface driver usb-storage
[ 109.613579] USB Mass Storage support registered.
[ 110.614456] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
[ 110.616674] sd 7:0:0:0: [sdc] 8237056 512-byte logical blocks: (4.21 GB/3.92 GiB)
[ 110.617821] sd 7:0:0:0: [sdc] Write Protect is off
[ 110.617835] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 110.618550] sd 7:0:0:0: [sdc] No Caching mode page present
[ 110.618561] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 110.621899] sd 7:0:0:0: [sdc] No Caching mode page present
[ 110.621908] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 110.787723] sdc: sdc1
[ 110.880634] sd 7:0:0:0: [sdc] No Caching mode page present
[ 110.880647] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 110.880655] sd 7:0:0:0: [sdc] Attached SCSI removable disk
Running openbox with PCManFM. Any clues how to solve this?
Last edited by light (2013-03-17 21:26:26)

s1ln7m4s7r wrote:
For what i can see from the log there is no problem.
Have you tried to manually mount it? To see if it is a PCManFM issue. Also, have you checked this:
https://wiki.archlinux.org/index.php/PC … ge_devices
Hi.
I tried installing gvfs, apparently I uninstalled it for some reason before. But it did not help mounting the flash drive. So I tried mounting it manually and it worked (Yaay!). But it complained that my flash drive was not mentioned in fstab. So I looked in fstab and the only ones listed is my root partion "/" and "/home". So how do I add USB mounting to fstab? I'm a little bit confused.
And one off-topic question: Shouldn't my "/var" partion also be mentioned in fstab?
Thanks for helping me
Edit: This is how fstab looks right now
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda2 LABEL=/
UUID=ed07bdb6-61c6-4cc7-b98d-122a869046f1 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda4 LABEL=/home
UUID=7448100b-682b-430f-9e59-327ce6f9f22c /home ext4 rw,relatime,data=ordered 0 2
Last edited by light (2013-03-17 20:54:38)

[SOLVED]USB flash drive no longer showing up in /dev

My USB flash drives are no longer showing up in /dev. I also don't see them in /dev/disks/... either. Dmesg outputs:
[731969.826862] usb 1-1: new high-speed USB device number 5 using ehci_hcd
Any ideas on where to start?
Last edited by nadman10 (2012-09-26 22:12:22)

ls -l outputs:
Bus 001 Device 005: ID 0781:5530 SanDisk Corp. Cruzer
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5530 Cruzer
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Bus 002 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x045e Microsoft Corp.
idProduct 0x0040 Wheel Mouse Optical
bcdDevice 3.00
iManufacturer 1
iProduct 3
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 72
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.05
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.05
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255

After 1 year, I finally solved the Flash Player 100% CPU issue!

I created this guide to help people with this problem.
http://sgsoft.bravehost.com/flashcpuproblem.html
My problem was after watching/doing Flash videos or anything Flash related, my CPU would go up to 100% and whole computer slows down to a point I had to close my browse through Task Manager.
Both in Firefox and Internet Explorer. Searched all over the web and still couldn't find a solution.
It was my CPU heating issue causing this slowdown and sluggish performance of Flash.
Hope, it helps you guys.

You may wish to note that at least some of the problems on any Windows system after Windows XP could relate to the use of FlashPlayers protected mode.
Some users may wish to employ the most recent version of Flash Player that will work on their sytem. in which case it could be worth trying an up-to-date version of FlashPlayer but with protected mode disabled.
The setting is changeable by editing a file ( adding the line ProtectedMode=0 to the Flash "mms.cfg" file) and instructions may be found in these articles
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows <br /> Probably an interesting reference article to scroll through regarding Flash Problems with Firefox
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround<br/>Again an article with more Flash Player troubleshooting tips included

[SOLVED] Opera + Flash = No Fullscreen on Youtube :/

Hi,
I've noticet that I can't force Opera to show Youtube content in fullscreen mode. I was talking to my mate who is using Ubuntu (with the same - latest - version of Opera 9.20 and the same Flash plugin 9.0r31) and he is using it just fine. Do you guys have the same problem? Or is it me ;P I was trying it on Beryl turned off and nothing changed. When I press fulscreen icon on youtube player the movie stops (keep loading thou) but nothing happens.
Any ideas?
SOLUTION: Ok for any one as dumb as I - the "Block unwanted pop-ups" option seem to block the Fullscreen videos, turn the option OFF or set the preferences for youtube page not to block the unwanted pop-ups. Strange that Opera is concidering the Fullscreen as "unwanted"
Sorry for making a 'big deal' about the whole problem
Peace.
Last edited by matchil (2007-04-11 20:55:35)

http://www.opera.com/docs/changelogs/linux/920/ wrote:Fullscreen movies on YouTube now start.

[solved] Pepper flash out of date?

Just reinstalled the system (64bit), downloaded the latest chrome and extracted pepper flash to chromium. It always worked flawlessly but this time it's saying that the plugin is outdated and can't be used. This is just an annoyance since we can set whatever version we want in /etc/chromium/default but I was just wondering why it is happening and if others have experienced such behavior.
Last edited by Matt3o (2013-01-24 10:12:22)

I've done exactly what the AUR package does, but manually.
- download latest 64bit chrome from google website
- extract pepper flash
- copy files to proper directory
- modify /etc/chromium/default
in fact AUR package gives me the same out of date error
Edit: my workaround is to add some units to the --ppapi-flash-version paramenter in the /etc/chromium/default
Last edited by Matt3o (2012-12-03 14:33:24)

[SOLVED] Getting Flash to Work in Steam on x86_x64

SOLVED - The latest Steam update fixes this problem.
This is Valve's solution for Ubuntu 12.04.
What is the Arch equivalent of the Ubuntu libxt6:i386 package? I have libxt, and lib32-libxt. A pacman query doesn't pull up an libxt6.
What do?
When a solution is found, I will also post it on Github.
Last edited by qKUqm3wtY4 (2013-02-04 07:22:02)

that's what i did:
installed lib32-flashplugin from aur and then did a symlink. i had to create the plugins directory in ubuntu12_32.
ln -s /usr/lib32/mozilla/plugins/libflashplayer.so ~/.local/share/Steam/ubuntu12_32/plugins/libflashplayer.so
Last edited by hcjl (2013-01-31 09:33:58)

[SOLVED] Have flash fullscreen not exit on separate x screen?

Is there a way I can have flash running fullscreen on my second monitor (running a separate x screen) and be able to click/use my other x screen?
edit: found this and it works http://www.ubunturoot.com/2011/07/fulls … -dual.html
Last edited by boast (2012-08-14 23:13:47)

work well but not with pepper flash

[SOLVED]Adode flash player error

Hi, since i the new version of flash player videos don't load they crash all the time and it turns to html5 which i hate a lot.
Last edited by pelasgos (2012-04-11 19:40:46)

Such is the nature of Flash on Linux. Unfortunately there is little anyone can do about this as Adobe have stopped supporting it. You could try downgrading, but in my experience Youtube doesn't work with non-current versions of Flash (and the old version has serious security holes in it.)
I find Chromium tends to work reasonably well, probably because it's the one platform Adobe *are* supporting on Linux. So if you're not averse to switching browsers (or at least using an alternative in some scenarios), you might try that
If you're using Firefox, FlashVideoReplacer, could be useful, though I've not used it for some time so I can't vouch for how well it works (or doesn't work).
Not sure where the "hate" of HTML5 comes from, though - it's a massive step forward for open standards on the web. Do you have some sort of technical problem with videos using it that we could help you with?
Hope this helps.
Last edited by mr.wizrd (2012-04-10 00:27:41)

[SOLVED] Updating/flashing BIOS in Linux?

I need to update BIOS for my computer. What can I use to do this on Linux?
The reason I need to do this is because there is a known problem with current BIOS that prevents me from using 8GB for memory.
From manufacturer's site, I downloaded AWDFLASH and bios .BIN file.
(I have SP35P2 from Shuttle)
Or.. How can I create DOS bootable image?
Last edited by kdar (2012-05-17 18:53:15)

https://wiki.archlinux.org/index.php/Fl … from_Linux
I found the easisest way is to make a bootable FreeDOS using Unetbootin as per the wiki above.
However, if that AWDFLASH is a Windows GUI only flasher (i.e. not DOS) then you may be out of luck. If so, check if flashrom will work with your machine. If not then you might be out of luck but sometimes some manufacturer's have a hot key setup that enables you to flash from a USB with a special hotkey during startup. You will need to google around to see of this is possible.

[Solved] 64b Flash + Vimperator = Sigh

Similar Messages

Maybe you are looking for