[solved] ACPI Info failed
Hi I'm having issues with my Arch installation on my laptop
I'm using i3wm with i3bar & i3status and have everything working fine except for one thing:
The i3status "gets stuck" meaning it doesn't update battery/clock stats. When I reset i3status it doesn't appear anymore either. When i run ACPI in the terminal, nothing shows up (just a blank screen). Same thing with htop. Top seems to work fine but viewing the date and time through the terminal command works fine.. It's just the battery stats screwing up. Htop reads battery life also so I figure that's why it hangs..
Here's a portion (most recent portion) of the dmesg output if it helps (there's some ACPI Error message I don't understand). This problem occurs randomly and is always fixed with a reboot.. but I'd rather not have to reboot.
[18610.212991] PM: Syncing filesystems ...
[18610.656035] done.
[18610.656042] PM: Preparing system for mem sleep
[18610.656551] Freezing user space processes ... (elapsed 0.001 seconds) done.
[18610.657874] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18610.658951] PM: Entering mem sleep
[18610.659004] Suspending console(s) (use no_console_suspend to debug)
[18610.659488] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18610.780306] sd 0:0:0:0: [sda] Stopping disk
[18611.846165] PM: suspend of devices complete after 1185.545 msecs
[18611.846376] PM: late suspend of devices complete after 0.208 msecs
[18611.849155] r8169 0000:0a:00.0: System wakeup enabled by ACPI
[18611.872922] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18611.886402] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[18611.912844] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[18611.926214] PM: noirq suspend of devices complete after 79.745 msecs
[18611.926398] ACPI: Preparing to enter system sleep state S3
[18611.926548] PM: Saving platform NVS memory
[18611.927156] Disabling non-boot CPUs ...
[18611.928387] kvm: disabling virtualization on CPU1
[18612.029634] smpboot: CPU 1 is now offline
[18612.031067] kvm: disabling virtualization on CPU2
[18612.133067] smpboot: CPU 2 is now offline
[18612.134429] kvm: disabling virtualization on CPU3
[18612.236515] smpboot: CPU 3 is now offline
[18612.237630] ACPI: Low-level resume complete
[18612.237668] PM: Restoring platform NVS memory
[18612.238096] Enabling non-boot CPUs ...
[18612.238130] x86: Booting SMP configuration:
[18612.238131] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18612.249751] kvm: enabling virtualization on CPU1
[18612.252084] Intel pstate controlling: cpu 1
[18612.252152] CPU1 is up
[18612.252168] smpboot: Booting Node 0 Processor 2 APIC 0x2
[18612.263702] kvm: enabling virtualization on CPU2
[18612.265943] Intel pstate controlling: cpu 2
[18612.265981] CPU2 is up
[18612.265997] smpboot: Booting Node 0 Processor 3 APIC 0x3
[18612.277526] kvm: enabling virtualization on CPU3
[18612.279786] Intel pstate controlling: cpu 3
[18612.279824] CPU3 is up
[18612.282987] ACPI: Waking up from system sleep state S3
[18612.348033] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[18612.374737] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[18612.401442] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18612.441648] PM: noirq resume of devices complete after 117.195 msecs
[18612.441850] PM: early resume of devices complete after 0.176 msecs
[18612.441976] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[18612.442200] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[18612.484192] r8169 0000:0a:00.0: System wakeup disabled by ACPI
[18612.645265] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
[18612.699308] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[18612.699311] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[18612.781882] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18612.791860] ata5.00: configured for UDMA/100
[18612.897396] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[18612.897399] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[18613.097651] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[18613.097654] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[18613.298206] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[18613.298209] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[18613.498078] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[18613.498081] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[18613.629818] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[18613.698271] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[18613.698274] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[18615.341478] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18615.354081] ata1.00: configured for UDMA/133
[18615.365017] sd 0:0:0:0: [sda] Starting disk
[18616.047534] PM: resume of devices complete after 3601.561 msecs
[18616.048455] PM: Finishing wakeup.
[18616.048457] Restarting tasks ... done.
[18616.052792] usb 3-3: USB disconnect, device number 3
[18616.062188] video LNXVIDEO:00: Restoring backlight state
[18616.062194] video LNXVIDEO:01: Restoring backlight state
[18616.112293] systemd[1]: Service tlp-sleep.service is not needed anymore. Stopping.
[18616.179245] iwlwifi 0000:08:00.0: no hotplug settings from platform
[18616.179280] r8169 0000:0a:00.0: no hotplug settings from platform
[18616.333431] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[18616.341035] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[18616.410512] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[18616.511451] r8169 0000:0a:00.0 eno1: link down
[18616.511491] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[18617.467805] wlo1: authenticate with 58:6d:8f:5a:72:e7
[18617.471308] wlo1: send auth to 58:6d:8f:5a:72:e7 (try 1/3)
[18617.474106] wlo1: authenticated
[18617.477162] wlo1: associate with 58:6d:8f:5a:72:e7 (try 1/3)
[18617.479695] wlo1: RX AssocResp from 58:6d:8f:5a:72:e7 (capab=0x401 status=0 aid=3)
[18617.482591] wlo1: associated
[18617.482643] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[18617.482956] wlo1: deauthenticating from 58:6d:8f:5a:72:e7 by local choice (reason=2)
[18617.488654] wlo1: authenticate with 58:6d:8f:5a:72:e7
[18617.492128] wlo1: send auth to 58:6d:8f:5a:72:e7 (try 1/3)
[18617.492506] cfg80211: Calling CRDA to update world regulatory domain
[18617.497135] wlo1: authenticated
[18617.500529] wlo1: associate with 58:6d:8f:5a:72:e7 (try 1/3)
[18617.503124] wlo1: RX AssocResp from 58:6d:8f:5a:72:e7 (capab=0x401 status=0 aid=3)
[18617.506527] wlo1: associated
[18627.519113] wlo1: deauthenticating from 58:6d:8f:5a:72:e7 by local choice (reason=3)
[18627.527313] cfg80211: Calling CRDA to update world regulatory domain
[18628.104060] wlo1: authenticate with 58:6d:8f:5a:72:e7
[18628.107098] wlo1: send auth to 58:6d:8f:5a:72:e7 (try 1/3)
[18628.109889] wlo1: authenticated
[18628.112658] wlo1: associate with 58:6d:8f:5a:72:e7 (try 1/3)
[18628.115386] wlo1: RX AssocResp from 58:6d:8f:5a:72:e7 (capab=0x401 status=0 aid=3)
[18628.117992] wlo1: associated
[18711.915093] usb 3-3: new low-speed USB device number 4 using xhci_hcd
[18711.948946] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[18711.948955] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[18711.958851] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input29
[18711.959137] hid-generic 0003:04F2:0402.0007: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-3/input0
[18711.980686] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input30
[18711.981173] hid-generic 0003:04F2:0402.0008: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-3/input1
[18725.987812] usb 3-2: new full-speed USB device number 5 using xhci_hcd
[18726.009897] logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[18769.731156] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.MMRD] (Node ffff8802538d1f50), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[18769.731169] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMB] (Node ffff8802538d2938), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[18769.731175] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMW] (Node ffff8802538d2960), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[18769.731180] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node ffff8802538d24d8), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[18769.731189] ACPI Exception: AE_AML_INFINITE_LOOP, Evaluating _BST (20131115/battery-473)
[18978.554233] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.000B/input/input31
[18978.554869] logitech-djdevice 0003:046D:C52B.000C: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-2:1
[19207.166990] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.MMRD] (Node ffff8802538d1f50), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19207.167004] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMB] (Node ffff8802538d2938), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19207.167010] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMW] (Node ffff8802538d2960), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19207.167015] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node ffff8802538d24d8), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19207.167026] ACPI Exception: AE_AML_INFINITE_LOOP, Evaluating _BST (20131115/battery-473)
[19644.603035] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.MMRD] (Node ffff8802538d1f50), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19644.603055] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMB] (Node ffff8802538d2938), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19644.603062] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMW] (Node ffff8802538d2960), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19644.603070] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node ffff8802538d24d8), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[19644.603083] ACPI Exception: AE_AML_INFINITE_LOOP, Evaluating _BST (20131115/battery-473)
[20082.062360] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.MMRD] (Node ffff8802538d1f50), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20082.062398] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMB] (Node ffff8802538d2938), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20082.062405] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMW] (Node ffff8802538d2960), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20082.062410] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node ffff8802538d24d8), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20082.062421] ACPI Exception: AE_AML_INFINITE_LOOP, Evaluating _BST (20131115/battery-473)
[20519.518413] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.MMRD] (Node ffff8802538d1f50), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20519.518430] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMB] (Node ffff8802538d2938), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20519.518436] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.RDMW] (Node ffff8802538d2960), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20519.518443] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node ffff8802538d24d8), AE_AML_INFINITE_LOOP (20131115/psparse-536)
[20519.518455] ACPI Exception: AE_AML_INFINITE_LOOP, Evaluating _BST (20131115/battery-473)
Can anyone help me figure this out? This kind of problem happened on Ubuntu 13.10 also. Thanks in advance guys.
Edit:
I also have my kernel parameters set as this if it helps
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor acpi_osi='!Windows 2012'"
Edit: Fixed
So this error seems independent of i3status or anything else. It's dependent on ACPI info stuff and only fails while running on battery mode. I'm not too sure exactly what goes wrong except for that it goes in an Infinite Loop (from looking at dmesg)
The fix that seemed to work for me is adding
acpi_osi=Linux
to my kernel boot paramters.
My boot parameters in grub now looks like this
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor acpi_osi=Linux acpi_osi='!Windows 2012'"
Ran on battery mode for at least 5-6 hours total, suspending and resuming, etc and so far there has been no problems. Seems like this fixed it.
Last edited by xifuvo (2014-04-26 20:00:28)
Please edit your post.
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
Similar Messages
-
[SOLVED] acpi-cpufreq fail to load
I had been using cpufreq to use the ondemand governor for a long time and it worked al right. Last update changed cpufreq to cpupower and I can no longer use cpu freq. scaling. And insmod won't load the acpi-cpufreq mod. I remeber well I used this module to get scaling to work. I have an amd athlon X2. And acpi support is enabled from BIOS.
Last edited by debdj (2013-03-29 08:09:55)mich41 wrote:
Please clean up this post. There's lot of duplicates and irrelevant stuff.
If acpi-cpufreq suddenly stopped working after update it must be a kernel bug (unless you updated BIOS at the same time).
Start with pacman -Syu since 3.7 branch is dead.
Okay, but where do you see duplicates? -
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue... the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
I notice some live tiles are active I prefer mine off so I shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
I wonder how many others have had this same issue and don't even know its happening....
1.
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
2.
taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
3.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
4.
Driver detected an internal error in its data structures for
5.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: e14
Start Time: 01cf3eb70280ca6e
Termination Time: 4294967295
Application Path: C:\WINDOWS\syswow64\wwahost.exe
Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
Faulting package-relative application ID: App
6.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 15bc
Start Time: 01cf3eb66f89a193
Termination Time: 15
Application Path: C:\WINDOWS\system32\wwahost.exe
Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.WindowsLive.MailI have the something similar happening as reported in event viewer in the warning section:
System
- Provider
[ Name] Microsoft-Windows-Security-SPP
[ Guid] {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
[ EventSourceName] Software Protection Platform Service
- EventID 1058
[ Qualifiers] 32768
Version 0
Level 3
Task 0
Opcode 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-08-13T04:35:49.000000000Z
EventRecordID 80761
Correlation
- Execution
[ ProcessID] 0
[ ThreadID] 0
Channel Application
Computer Monzworks
Security
- EventData
0xC004F059
installation of the proof of purchase from the acpi table failed 0xc004f059
My System Properties page says "Windows is activated" and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.
Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
Before this I had used apps.diagcab and it said my IE 11's temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
location: . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
engine could not be completed. I had to use a system restore. I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
- System
- Provider
[ Name] Microsoft-Windows-Security-Auditing
[ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
EventID 5061
Version 0
Level 0
Task 12290
Opcode 0
Keywords 0x8010000000000000
- TimeCreated
[ SystemTime] 2014-08-13T03:48:26.671362500Z
EventRecordID 290021
Correlation
- Execution
[ ProcessID] 676
[ ThreadID] 728
Channel Security
Computer Monzworks
Security
- EventData
SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
SubjectUserName Monz Prez
SubjectDomainName MONZWORKS
SubjectLogonId 0x239d9
ProviderName Microsoft Software Key Storage Provider
AlgorithmName UNKNOWN
KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
KeyType %%2500
Operation %%2480
ReturnCode 0x80090016
I am tired so talk among yourselves.
Sincerely Tired -
We have an Oracle SQL query which runs in seconds directly on the database but when we put it in InfoView it runs for several minutes.
We ran a trace on the query in InfoView and received thousands of lines of this:
**WARNING:CCDZMgr:Update memory info failed [cecdzmgr.cpp;1161]
Has anyone seen this before? Is it something we can repair or do we have to live with it?
Thanks
JoshHI Josh,
I have seen this in almost every 3.X log. We've looked into this and found that it's nothing to worry about. If things are running slow, you'll need to look in another direction.
Hope this helps.
Bill
Edited by: Bill Walker on Feb 7, 2009 3:17 AM -
[SOLVED] Bumblebee problems (Failed to assign any connected ...)
Hello everybody.
I'm having this exact issue: https://wiki.archlinux.org/index.php/Bu … X_screen_0.
Unfortunately, the provided solution does not help in my case.
I'm pretty much out of ideas now, so I'll post the configs and output of what I've got so far and hope for the best.
lspci: (seems strange that installing the nvidia drivers did not cause my gfx card - GeForce 880M GTX to be recognized as such)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Micro-Star International Co., Ltd. Device 1105
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1198 (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 1105
Kernel driver in use: nvidia
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:1:0:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "Device0"
# Option "ConnectedMonitor" "CRT"
EndSection
/etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="i915"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
the error I'm getting while trying to run optirun glxgears -info:
[ 626.525385] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
[ 626.525442] [ERROR]Aborting because fallback start is disabled.
and my /etc/X11/xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.19 (buildmeister@swio-display-x64-rhel04-03) Tue Apr 29 20:34:50 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "2880x1620"
EndSubSection
EndSection
I'm new to installing Arch so please take into consideration the possibility of outrageously stupid things I might have done to cause this mayhem.
Last edited by elkorn (2014-05-23 07:34:50)I have actually had a success message among one of the error messages, which was:
Can't open display(null)
And meant that everything is in order but I just did not have X started.
I interpreted that incorrectly and tried to further fiddle with display configuration.
Marking as Solved. -
How to solve the build fail error when the file below mention cant be found
Hi,
i got this build fail but i cant find where the error came from and how to solve it. im stucked at this problem for quite a long time.
BUILD FAILED
C:\Infrastructure\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
C:\Infrastructure\Infrastructure\DBSchema\build.xml:262: C:\Infrastructure\Infrastructure\Ant\OracleMiddlewarejdeveloper\modules\oracle.adf.share_11.1.1 not found
Is there any solutions to it??
Rgds,
lxBelow are my codes for the build.properties.
# Base Directory for library lookup
jdeveloper.home=C:\Oracle\Middleware\jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=fypj
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=fusion
db.demoUser.password=oracle
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP -
[SOLVED] Netbeans - Run fails - most of the time
Hello everybody,
I have just today installed Netbeans Verion 7.0 and all plugins are up to date.
I have a strage error with a simple "Hello World" program:
The program builds always fine, but it runs just in about 1 of 5 tries.
Here are some screenshots:
Build Info
Success
Fail
I also realized, that when I choose "Debug / Debug Main Project" this works all the time.
Any suggestions?
matse
Last edited by matse (2011-06-11 20:51:09)just found a workaround here:
http://forums.netbeans.org/ptopic28915.html
disabling the built-in profiler: in project properties ->
Profile, uncheck "Show profiling indicators during run".
solved the problem. -
[Solved] Pacman preparation failed
I'm trying a new installation from a USB key and it fails on the Package Selection phase. The error message I get on tty7 is:
Execute(): worker_package_list exit state was 1
More info:
- arch is x86_64
- I'm installing from a USB stick on a laptop that has been running x32 arch for at least a year (it's a core2 cpu)
- I've checked and double-checked the md5sum of the iso and the image on the stick
- I'm using a core iso - no network access
- I select the local core repo when running aif
- I can see all the packages in /repo/core/x86_64/{core,any}
- I've read the aif bash scripts but so far I've been unable to see what the problem might be
I've read all I've found about the subject (there are many threads on this problem), but nothing that describes my exact situation; nothing has helped me. If somebody has any pointers, I'll be grateful!
-- buo
P.S: I've solved this problem; here's the solution in case anyone else encounters something similar. My drive was already partitioned and formatted, so I was telling aif to leave it alone. After I allowed it to reformat the root partition, the problem went away.
Last edited by buo (2012-05-25 15:50:26)I get an error, "pacman preparation failed. check /dev/tty7 for errors"
did you? -
Wine install fails due to
[cii@cii1 ~]$ sudo pacman -S wine
resolving dependencies...
looking for inter-conflicts...
Targets (18): lib32-acl-2.2.51-2 lib32-attr-2.4.46-2 lib32-bzip2-1.0.6-1
lib32-fontconfig-2.8.0-4 lib32-freetype2-2.4.10-1
lib32-gcc-libs-4.7.1-4.1 lib32-gettext-0.18.1.1-2
lib32-libice-1.0.8-1 lib32-libsm-1.2.1-1
lib32-libxcursor-1.1.13-1 lib32-libxi-1.6.1-1
lib32-libxrandr-1.3.2-2 lib32-libxrender-0.9.7-1
lib32-libxt-1.1.3-1 lib32-mesa-8.0.3-3.2
lib32-util-linux-2.21.2-1 lib32-zlib-1.2.7-1 wine-1.5.8-1
Total Download Size: 0.13 MiB
Total Installed Size: 247.69 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from multilib...
lib32-mesa-8.0.3-3.... 4.2 KiB 38.7K/s 00:00 [######################] 100%
(18/18) checking package integrity [######################] 100%
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
[cii@cii1 ~]$ sudo pacman -S wine --debug
debug: parseconfig: options pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: arch: x86_64
debug: config: finish section 'options'
debug: config: new section 'catalyst'
debug: config: finish section 'catalyst'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 80: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 84: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 92: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 103: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: config: finished parsing /etc/pacman.conf
debug: setup_libalpm called
debug: option 'logfile' = /var/log/pacman.log
debug: option 'gpgdir' = /etc/pacman.d/gnupg/
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: parseconfig: repo pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: finish section 'options'
debug: config: new section 'catalyst'
debug: config: SigLevel: Never
debug: config: finish section 'catalyst'
debug: registering sync database 'catalyst'
debug: database path for tree catalyst set to /var/lib/pacman/sync/catalyst.db
debug: adding new server URL to database 'catalyst': http://catalyst.apocalypsus.net/repo/catalyst/x86_64
debug: config: new section 'core'
debug: config: SigLevel: PackageRequired
debug: config file /etc/pacman.conf, line 80: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: registering sync database 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core.db
debug: "/var/lib/pacman/sync/core.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/core.db.sig could not be opened
debug: missing optional signature
debug: adding new server URL to database 'core': http://archlinux.supsec.org/core/os/x86_64
debug: adding new server URL to database 'core': http://archlinux.surlyjake.com/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://cake.lib.fit.edu/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://cosmos.cites.illinois.edu/pub/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://ftp.osuosl.org/pub/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://hive.ist.unomaha.edu/archlinux/core/os/x86_64
debug: config: new section 'extra'
debug: config: SigLevel: PackageRequired
debug: config file /etc/pacman.conf, line 84: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: registering sync database 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra.db
debug: "/var/lib/pacman/sync/extra.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/extra.db.sig could not be opened
debug: missing optional signature
debug: adding new server URL to database 'extra': http://archlinux.supsec.org/extra/os/x86_64
debug: adding new server URL to database 'extra': http://archlinux.surlyjake.com/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://cake.lib.fit.edu/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://cosmos.cites.illinois.edu/pub/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://ftp.osuosl.org/pub/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://hive.ist.unomaha.edu/archlinux/extra/os/x86_64
debug: config: new section 'community'
debug: config: SigLevel: PackageRequired
debug: config file /etc/pacman.conf, line 92: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: registering sync database 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community.db
debug: "/var/lib/pacman/sync/community.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/community.db.sig could not be opened
debug: missing optional signature
debug: adding new server URL to database 'community': http://archlinux.supsec.org/community/os/x86_64
debug: adding new server URL to database 'community': http://archlinux.surlyjake.com/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://cake.lib.fit.edu/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://cosmos.cites.illinois.edu/pub/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://ftp.osuosl.org/pub/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://hive.ist.unomaha.edu/archlinux/community/os/x86_64
debug: config: new section 'multilib'
debug: config: SigLevel: PackageRequired
debug: config file /etc/pacman.conf, line 103: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: registering sync database 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib.db
debug: "/var/lib/pacman/sync/multilib.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/multilib.db.sig could not be opened
debug: missing optional signature
debug: adding new server URL to database 'multilib': http://archlinux.supsec.org/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://archlinux.surlyjake.com/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://cake.lib.fit.edu/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://cosmos.cites.illinois.edu/pub/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://ftp.osuosl.org/pub/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://hive.ist.unomaha.edu/archlinux/multilib/os/x86_64
debug: config: finished parsing /etc/pacman.conf
debug: loading package cache for repository 'local'
debug: added 419 packages to package cache for db 'local'
debug: loading package cache for repository 'catalyst'
debug: opening database archive /var/lib/pacman/sync/catalyst.db
debug: added 8 packages to package cache for db 'catalyst'
debug: loading package cache for repository 'core'
debug: opening database archive /var/lib/pacman/sync/core.db
debug: added 195 packages to package cache for db 'core'
debug: loading package cache for repository 'extra'
debug: opening database archive /var/lib/pacman/sync/extra.db
debug: added 2785 packages to package cache for db 'extra'
debug: loading package cache for repository 'community'
debug: opening database archive /var/lib/pacman/sync/community.db
debug: added 2570 packages to package cache for db 'community'
debug: loading package cache for repository 'multilib'
debug: opening database archive /var/lib/pacman/sync/multilib.db
debug: added 144 packages to package cache for db 'multilib'
debug: adding package 'wine'
debug: adding package wine-1.5.8-1 to the transaction add list
resolving dependencies...
debug: resolving target's dependencies
debug: started resolving dependencies
debug: checkdeps: package wine-1.5.8-1
debug: checkdeps: missing dependency 'lib32-fontconfig' for package 'wine'
debug: checkdeps: missing dependency 'lib32-mesa' for package 'wine'
debug: checkdeps: missing dependency 'lib32-libxcursor' for package 'wine'
debug: checkdeps: missing dependency 'lib32-libxrandr' for package 'wine'
debug: checkdeps: missing dependency 'lib32-libxi' for package 'wine'
debug: checkdeps: missing dependency 'lib32-gettext' for package 'wine'
debug: pulling dependency lib32-fontconfig (needed by wine)
debug: pulling dependency lib32-mesa (needed by wine)
debug: pulling dependency lib32-libxcursor (needed by wine)
debug: pulling dependency lib32-libxrandr (needed by wine)
debug: pulling dependency lib32-libxi (needed by wine)
debug: pulling dependency lib32-gettext (needed by wine)
debug: checkdeps: package lib32-fontconfig-2.8.0-4
debug: checkdeps: missing dependency 'lib32-freetype2>=2.3.11' for package 'lib32-fontconfig'
debug: pulling dependency lib32-freetype2 (needed by lib32-fontconfig)
debug: checkdeps: package lib32-mesa-8.0.3-3.2
debug: checkdeps: missing dependency 'lib32-libxt>=1.1.1' for package 'lib32-mesa'
debug: checkdeps: missing dependency 'lib32-gcc-libs>=4.6.1' for package 'lib32-mesa'
debug: pulling dependency lib32-libxt (needed by lib32-mesa)
debug: pulling dependency lib32-gcc-libs (needed by lib32-mesa)
debug: checkdeps: package lib32-libxcursor-1.1.13-1
debug: checkdeps: missing dependency 'lib32-libxrender' for package 'lib32-libxcursor'
debug: pulling dependency lib32-libxrender (needed by lib32-libxcursor)
debug: checkdeps: package lib32-libxrandr-1.3.2-2
debug: checkdeps: missing dependency 'lib32-libxrender' for package 'lib32-libxrandr'
debug: checkdeps: package lib32-libxi-1.6.1-1
debug: checkdeps: package lib32-gettext-0.18.1.1-2
debug: checkdeps: missing dependency 'lib32-acl' for package 'lib32-gettext'
debug: pulling dependency lib32-acl (needed by lib32-gettext)
debug: checkdeps: package lib32-freetype2-2.4.10-1
debug: checkdeps: missing dependency 'lib32-zlib' for package 'lib32-freetype2'
debug: checkdeps: missing dependency 'lib32-bzip2' for package 'lib32-freetype2'
debug: pulling dependency lib32-zlib (needed by lib32-freetype2)
debug: pulling dependency lib32-bzip2 (needed by lib32-freetype2)
debug: checkdeps: package lib32-libxt-1.1.3-1
debug: checkdeps: missing dependency 'lib32-libsm' for package 'lib32-libxt'
debug: pulling dependency lib32-libsm (needed by lib32-libxt)
debug: checkdeps: package lib32-gcc-libs-4.7.1-4.1
debug: checkdeps: package lib32-libxrender-0.9.7-1
debug: checkdeps: package lib32-acl-2.2.51-2
debug: checkdeps: missing dependency 'lib32-attr>=2.4.46' for package 'lib32-acl'
debug: pulling dependency lib32-attr (needed by lib32-acl)
debug: checkdeps: package lib32-zlib-1.2.7-1
debug: checkdeps: package lib32-bzip2-1.0.6-1
debug: checkdeps: package lib32-libsm-1.2.1-1
debug: checkdeps: missing dependency 'lib32-libice' for package 'lib32-libsm'
debug: checkdeps: missing dependency 'lib32-util-linux-ng' for package 'lib32-libsm'
debug: pulling dependency lib32-libice (needed by lib32-libsm)
debug: provider found (lib32-util-linux provides lib32-util-linux-ng)
debug: pulling dependency lib32-util-linux (needed by lib32-libsm)
debug: checkdeps: package lib32-attr-2.4.46-2
debug: checkdeps: package lib32-libice-1.0.8-1
debug: checkdeps: package lib32-util-linux-2.21.2-1
debug: finished resolving dependencies
debug: started sorting dependencies
debug: sorting dependencies finished
looking for inter-conflicts...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package lib32-zlib-1.2.7-1
debug: checkdeps: package lib32-bzip2-1.0.6-1
debug: checkdeps: package lib32-freetype2-2.4.10-1
debug: checkdeps: package lib32-fontconfig-2.8.0-4
debug: checkdeps: package lib32-libice-1.0.8-1
debug: checkdeps: package lib32-util-linux-2.21.2-1
debug: checkdeps: package lib32-libsm-1.2.1-1
debug: checkdeps: package lib32-libxt-1.1.3-1
debug: checkdeps: package lib32-gcc-libs-4.7.1-4.1
debug: checkdeps: package lib32-mesa-8.0.3-3.2
debug: checkdeps: package lib32-libxrender-0.9.7-1
debug: checkdeps: package lib32-libxcursor-1.1.13-1
debug: checkdeps: package lib32-libxrandr-1.3.2-2
debug: checkdeps: package lib32-libxi-1.6.1-1
debug: checkdeps: package lib32-attr-2.4.46-2
debug: checkdeps: package lib32-acl-2.2.51-2
debug: checkdeps: package lib32-gettext-0.18.1.1-2
debug: checkdeps: package wine-1.5.8-1
debug: found cached pkg: /var/cache/pacman/pkg/lib32-zlib-1.2.7-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-zlib
debug: found cached pkg: /var/cache/pacman/pkg/lib32-bzip2-1.0.6-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-bzip2
debug: found cached pkg: /var/cache/pacman/pkg/lib32-freetype2-2.4.10-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-freetype2
debug: found cached pkg: /var/cache/pacman/pkg/lib32-fontconfig-2.8.0-4-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-fontconfig
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libice-1.0.8-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libice
debug: found cached pkg: /var/cache/pacman/pkg/lib32-util-linux-2.21.2-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-util-linux
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libsm-1.2.1-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libsm
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxt-1.1.3-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libxt
debug: found cached pkg: /var/cache/pacman/pkg/lib32-gcc-libs-4.7.1-4.1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-gcc-libs
debug: setting download size 138244 for pkg lib32-mesa
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrender-0.9.7-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libxrender
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxcursor-1.1.13-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libxcursor
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrandr-1.3.2-2-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libxrandr
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxi-1.6.1-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-libxi
debug: found cached pkg: /var/cache/pacman/pkg/lib32-attr-2.4.46-2-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-attr
debug: found cached pkg: /var/cache/pacman/pkg/lib32-acl-2.2.51-2-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-acl
debug: found cached pkg: /var/cache/pacman/pkg/lib32-gettext-0.18.1.1-2-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg lib32-gettext
debug: found cached pkg: /var/cache/pacman/pkg/wine-1.5.8-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg wine
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
debug: returning error 31 from alpm_db_get_pkg : could not find or read package
Targets (18): lib32-acl-2.2.51-2 lib32-attr-2.4.46-2 lib32-bzip2-1.0.6-1
lib32-fontconfig-2.8.0-4 lib32-freetype2-2.4.10-1
lib32-gcc-libs-4.7.1-4.1 lib32-gettext-0.18.1.1-2
lib32-libice-1.0.8-1 lib32-libsm-1.2.1-1
lib32-libxcursor-1.1.13-1 lib32-libxi-1.6.1-1
lib32-libxrandr-1.3.2-2 lib32-libxrender-0.9.7-1
lib32-libxt-1.1.3-1 lib32-mesa-8.0.3-3.2
lib32-util-linux-2.21.2-1 lib32-zlib-1.2.7-1 wine-1.5.8-1
Total Download Size: 0.13 MiB
Total Installed Size: 247.69 MiB
Proceed with installation? [Y/n] y
debug: using cachedir: /var/cache/pacman/pkg/
:: Retrieving packages from multilib...
debug: url: http://archlinux.supsec.org/multilib/os/x86_64/lib32-mesa-8.0.3-3.2-x86_64.pkg.tar.xz
debug: maxsize: 138244
debug: opened tempfile for download: /var/cache/pacman/pkg/lib32-mesa-8.0.3-3.2-x86_64.pkg.tar.xz.part (wb)
downloading lib32-mesa-8.0.3-3.2-x86_64.pkg.tar.xz...
debug: curl returned error 0 from transfer
debug: response code: 200
debug: using cachedir: /var/cache/pacman/pkg/
checking package integrity...
debug: found cached pkg: /var/cache/pacman/pkg/lib32-zlib-1.2.7-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPokRtAAoJEH8tQ0uXQeisMKoIAKwa7/myZVxPxiIoP/atCYekMxcl2/LDKzaoCKNVdrUdUfLnaSLPnNDFOb0LcYAZjbFxruRvF1Ojtc1drwjxGjbRKnWD9RNC5fRd0ZN6V/+2agKg0nooQd2TMH7M2cVYZefQTFslULb1fJco/14YIarGrVsGjTO4T8B3QycVcKk4LFTuTt8i9ALbzEDxDim3sJeYySsH7FBwcD9vuLSONGeMQFKnKEYl9O2y93Bapcqk6oIsNY8vPxcbU3T/l3HsSssgS6ZG9oAeQbafiBRkeQKTZPfX98q9bySrLYHAtjkEsciGhf4kuGUriwfKIlm36xz89nn2Rrc08DAwxDAodmM=
debug: GPGME version: 1.3.1
debug: GPGME engine info: file=/usr/bin/gpg, home=/etc/pacman.d/gnupg/
debug: checking signature for /var/cache/pacman/pkg/lib32-zlib-1.2.7-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1336034413
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-bzip2-1.0.6-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJOOV5HAAoJEOjxi6FhUTe8tKAIAOA82aijL1mPu0UlK3NSXQ7IqltDEZVI1V3RAB22+FBNngj19Bu5KRw2XOel9ObDif1+gXA0kYJLG0K/MIVO3zue9ueTruDGvaOPPwFcMX2b9wbKwcfbJL5rxWdE6OX97scD3e61XMTn0UbeinJG8HOS4INhVdTuctgpczcMTMkmkq7+Ov14PC1v4HFEHhMslpjtt8/+/q+CtXOLQVFQO1CL8oFF+2EqttA01lth3v+XIMUssOJfakxsB5coY2RstGfk49US6YZN8TqOfDDoM9wVoeVDRDQtts7cOnmGb3eJRk3AWRmjxRXsSqOs/nOAYHh34QA9LR5QqzmytjiM9Ko=
debug: checking signature for /var/cache/pacman/pkg/lib32-bzip2-1.0.6-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: F4DDD6DDCEC320B665F502AAE8F18BA1615137BC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1312382535
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: F4DDD6DDCEC320B665F502AAE8F18BA1615137BC, Ionut Biru <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-freetype2-2.4.10-1-x86_64.pkg.tar.xz
debug: sig data: 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
debug: checking signature for /var/cache/pacman/pkg/lib32-freetype2-2.4.10-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1339841227
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E, Florian Pritz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-fontconfig-2.8.0-4-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPMsOJAAoJEH8tQ0uXQeisrKUIAJYqx847RjgkMSvGYZBRooJtdvTPpvLilwG/VngfgQXEWSUhzIhKecmPkmCIaSBd3Fdh6ScLdX/TREUpqxhpX3BTddJk0TCRDKZE1AR3nP2IMNssB9hos8cKzmiOvkEUxRB1TUuzszwnp3nePyJLdeb/8PEeacxO6qHtOuSsvJrcjktwBgthM8GqzMjuvNwB8GnB9NYb3DRfAgcJy4UoY4y6+J58qzw9lElMc1v4WbAp0TR9PqrFXjNlb96j9oy/jXTTy63wGURPcLkY3xqrjnR5wrtD0zKbNy7D8P6Lg+xHZ/lEjahb1AmuW8H+BTA6Gdo1KjaNjTW7uAim9xSJ+1A=
debug: checking signature for /var/cache/pacman/pkg/lib32-fontconfig-2.8.0-4-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1328726921
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libice-1.0.8-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPZe3GAAoJEAYJamrRzt2sQb4IALRdVJ8k6HvFXOLJGA5yPWGRVyn1dkaGXxfe9HEb9wMuzD+WvRfZhTGDL65yIemyRt9beR4jQJGmpm8WGxvikaM9bQ23Gjnh9rAd1uMymI2LX28A71YEijkazz00NVg5wRm6jIfb6NROMKsR9zit+JpYZrIZS1RUhmj9kP5c+MnNogDyrePT/OcWkAJng81/RlWZ/NVTVEedRiale6wdpLSZefKcro/F23hvCknUOaTFAUn7R6NwZqi7iD+S5SZAaxIuU2P9c0Pvw6U5ReEuvX3ABMbUO+bYVGFA+gRZtEzzhJimRrmTpZllRvYQHE/PAn21/YjuxhkOv5CBWCb6faI=
debug: checking signature for /var/cache/pacman/pkg/lib32-libice-1.0.8-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1332080070
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-util-linux-2.21.2-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJP2w6FAAoJEB6yY4/1bAxTdAsH/3f62YRlJIlSngw9cSE7M/9Zw286SLlZe4Oxs7HQOvqxrG502XdSjGksdxhLLOu4bQo/EtgxmSBZGacj7KTTnH3sCPnD2s+pjLwsQuQ9CMyAk9kZ0rv93uRPiKusKjMWCdMMgHswJbkB13Je9I/u/X9E2eGpQVPREzhyiCZglJtP70/gXtT9s53wkIIHQGPemEsTSNRkinpJAmT3Ck4P5PECWU3G7KUBRO0k5faJEWM7oso7u3ZAFNS43nm3wVXjeHRpWQ0Kyl4Cd7DC9AukOs2AGT0mwoBqhpoU11B6YAYkKHZvnTK+Fcxcz78o5pOaK2aOngwhv2PRjegHTe2aQM8=
debug: checking signature for /var/cache/pacman/pkg/lib32-util-linux-2.21.2-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 487EACC08557AD082088DABA1EB2638FF56C0C53
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1339756165
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 487EACC08557AD082088DABA1EB2638FF56C0C53, Dave Reisner <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libsm-1.2.1-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPcD6IAAoJEH8tQ0uXQeis+sMH/jRQaC5dy9MGPDj8VnwIvONSi6/IWnFnuYQf2EMqkgA0ch3J/V7DUFZqh+o0IorgILCOC4laBuGpunccUptsUVG/0et9lbhAbF9nh08OhTsP18VWrcFfQfY7SQBvOj8ZJIgqj6Q/GLfUOkFo4icM8/S1/WPYgL2NWT1KYzVvWMrmmNifcN4iDulqBKtuFvsSH7d8QNaC8uLj0l7hO/lkFmDlabd8tPhn2en31cxwuALgTT3EniAhN0HuD4ds/smggkC+ysa9v5yr68Qexn9UcyMUxojYnTci0DVKe6LAG8cW6jNh9eN4/38hKsn+FopwRyFCAl2Z/79Bv3mHhU5cUco=
debug: checking signature for /var/cache/pacman/pkg/lib32-libsm-1.2.1-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1332756104
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxt-1.1.3-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPcD6hAAoJEH8tQ0uXQeispi4H/jsr+PJlIk4PufVsswlSRR5Cn176n41tv9RsdjKpBjZrnROXk9XcOki0Nbw/3m8Gjh7ARyF5MN6M6RrWv+10EiQ0UGLYA9tnPhNBthkSUARyIh7abipRuCJT3twEEYaLdYiYE99Ep8ZYuvEYnAitGoVj7KU9eK9KSCRlmylzDbAPU4mWOQbjPrOe0j/AH1SJcKwMH/DTl6NMTmh4bLYR9jhvSdL70zjHex2DpKndndYB/gboN8nV0783Xb1zMwzn3icV7Nd3dCSo3eiEukIRTL2q7Bddl93rLp+86vxBbFXxBtJF73H4vSoPEBViEUNIZnFU8yk5kPgucPMTfG3jGqs=
debug: checking signature for /var/cache/pacman/pkg/lib32-libxt-1.1.3-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1332756129
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-gcc-libs-4.7.1-4.1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJP+AxCAAoJEKXpKIxPpBX6E9wIAIFT9s8cRudfr1fYOp2VRGhNtERbrF+XW0L0xMTGDTeKYgp7DA+LOcHkhqBoyzJz/fgLbfUM0udNxg6qCwdHDe7sfoZOXLKjPZUXgxWtbqic5XcLgP0Z/COFJszhrnoLTV99jzy3lwHLDEk7NV5If8s7YVUHla5/LSsR5D4sti23EhWT0B/PSFHYsxijklrShWqnbELAoC7pQvdWnx8op1rZhDc8+nkd2FaMBleWVlRxhym2E1CNhPY2pbMXBsAuoX+6MH+fiK7b7v0lCVwUT7BTH7frJC3EQmKzuXCzD/nRjhcK45xYN6WZepPAflQKE1z+Liz/XOqXcr5Q8TNndQI=
debug: checking signature for /var/cache/pacman/pkg/lib32-gcc-libs-4.7.1-4.1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 8218F88849AAC522E94CF470A5E9288C4FA415FA
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1341656130
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 8218F88849AAC522E94CF470A5E9288C4FA415FA, Jan Alexander Steffens (heftig) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: returning error 6 from _alpm_pkg_validate_internal : wrong or NULL argument passed
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrender-0.9.7-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPcD33AAoJEH8tQ0uXQeisxWcIAKe3nQBGwv7E0Bj1Yg7w8NR6Qn0VWHCa6eGCzivBZC6N/FfNUz/QBB2xtsRdpHK15PjIVEu7TBSFznksSpNLxZgto/ZGto7iHWmMATgyedDlFispIeR8DcPHd/EuAddS/SoXaQq3vxEbYUkhclu9AnQJIKS+6OGcNufKLDBcNJ636JGH99w1yeIic97Xfxhvj7wQo5io0yRXi+PhT2KWSqw1nafPyXxRBLGRQZLWSLHITcSA3bXwSPxLo3c3v3MGgcUK4q8czenwGlOqSPCeXRGyiN3yyU0r474KGj5qEz1UDHsrvTXH0ZIjiYVzbmuKfqsCx6Pugjp73QM4JjyDZJs=
debug: checking signature for /var/cache/pacman/pkg/lib32-libxrender-0.9.7-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1332755959
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxcursor-1.1.13-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPcDgmAAoJEH8tQ0uXQeis7SgIAKYEyL/JifHsVuS136Ehgs/rvGHTww/DFmUdqpD4xiuepqyD+G+eRlOlwPA4DYRQiaRkifF1yFr8p6Tsu07LeTnJuLtayjzwLDpBMSO+nRETQdwijMzkXz35b4shLsvMJJc+m121INOva56LTbca8PeW49d3JqecNDE2KQ2cSzfMmvFbHADl/DSb+Hl/zt6L5a/aELLBvT8FAHf7fb8FyYdeFOAsq+0WbXy/Uee9OZc6vlQaUxjtgesRS/XBlHbMiX9NRPbeHQbtQERQCwOCN4UfLLhpNvMzBNf6UhxfNOoh62VXaDLhfaYRnWbN6l4+hRJbGSZ2fUR2FwKt4sSPpCo=
debug: checking signature for /var/cache/pacman/pkg/lib32-libxcursor-1.1.13-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1332754470
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrandr-1.3.2-2-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJPZfPuAAoJEAYJamrRzt2suJ4H/RQfZMuETuDRlK2QG+jrfJGc6VkH9A8pj9UZWyM94/n8SsX+IFzP0J7Rym8ErdzxWC+TRpcYMkPFwip8qqANmLsfm/erkzzbj+47ynkY/iLY1aRRfUIGNVmgOztbtOl6GmA/8HImUdLnsy9z4lOUEQcjQCHkQ6r2kt9FDeC8SMZPV5+0i52AWQHzGXOB61g8CNtgXNYPoPLx0VqhEeHdlk24WCX4WY0DIuE3LTxrQIqXDF9ivbx93bJ/oU6woiPQoIPvCo/z5O6vJtZ8Z1/RUZEeYDYf+T+7sqCYYMoMhv2nx/7zbxY1pfJudF5/p22mqT6J9tmIa+xubQpX8adalaw=
debug: checking signature for /var/cache/pacman/pkg/lib32-libxrandr-1.3.2-2-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1332081646
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxi-1.6.1-1-x86_64.pkg.tar.xz
debug: sig data: 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
debug: checking signature for /var/cache/pacman/pkg/lib32-libxi-1.6.1-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1337011752
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E, Florian Pritz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-attr-2.4.46-2-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJO85p/AAoJEAYJamrRzt2sDKgIAKhpVKclFgrplruauivX5GnNjFiZI7hW+n8glKwI2ODLfk+pDBhp//8bcFMXaNPThpo9hmjfhBFYIjxlPeE8GXkVZO8RG57sPNdBcRYjjA2mJm1cZKVVGq+qDHStmMneg7xOQpkAOHDYlTRb8LTIVkAaIJLXHBG3xUq1hy6Ub+x738SZtXa9P4dZRGAHcu0+OkXjzADoTWX4UoOvFmHRNtmmVwqDEmOJFU48py5GTJEeDOAUlciC7X618MJuURNK3zMQt/bgbl4drlxTR1aj88M4B92le26TedyIGhpHiQDj4ypgH9jo9E+XK1YYH4SCEH6wCp0wRP1YUsfzseGWSDc=
debug: checking signature for /var/cache/pacman/pkg/lib32-attr-2.4.46-2-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1324587647
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-acl-2.2.51-2-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABAgAGBQJOtGQ7AAoJEAYJamrRzt2szZwH/jh6JYpBPx9KINShjXlzlTvmpuBIKEUKFlS1Wwe3D6pJ5hDMaMh7LjQma5bxVCpxdh/dI87u4838wHJNWUAv1Qj57f0VRo/N65Mc5X43s7gdJH+yJ5sQP54uiGhKvYcW2iJ0tmd/Iq+p7Yjb9Qe43CN3a5NPNPd5KUPWTSHlVML5ui4uxJEUAgESrhZ/3eMB7qyDZM9EN8JvkAIrNAFTq5dNHaD8+9WZG+Zfo9EyMrtM2E768YyR2a9So5ilyjFBYgVl7b7MEpQ+As5LmwY+bihiLxun6AZ9Xl8suGGstaULUW0ngdfPBbDe0JNR9HUIzzWQUOuLnYqXkBpNfKYfqBE=
debug: checking signature for /var/cache/pacman/pkg/lib32-acl-2.2.51-2-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1320444987
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/lib32-gettext-0.18.1.1-2-x86_64.pkg.tar.xz
debug: sig data: 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
debug: checking signature for /var/cache/pacman/pkg/lib32-gettext-0.18.1.1-2-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1322864785
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E, Florian Pritz <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: found cached pkg: /var/cache/pacman/pkg/wine-1.5.8-1-x86_64.pkg.tar.xz
debug: sig data: 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
debug: checking signature for /var/cache/pacman/pkg/wine-1.5.8-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 8FC15A064950A99DD1BD14DD39E4B877E62EB915
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1341354649
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 8FC15A064950A99DD1BD14DD39E4B877E62EB915, Sven-Hendrik Haase <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: returning error 33 from check_validity : invalid or corrupted package
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
debug: unregistering database 'local'
debug: freeing package cache for repository 'local'
debug: unregistering database 'catalyst'
debug: freeing package cache for repository 'catalyst'
debug: unregistering database 'core'
debug: freeing package cache for repository 'core'
debug: unregistering database 'extra'
debug: freeing package cache for repository 'extra'
debug: unregistering database 'community'
debug: freeing package cache for repository 'community'
debug: unregistering database 'multilib'
debug: freeing package cache for 'multilib'
Anyone have any hints for solving this?
EDIT: running pacman update seems to have fixed this issue
Last edited by duke11235 (2012-07-13 19:04:50)Ah, my mistake was an incorrect partition table back when I partitioned the disk. I did not make a partition table for GPT partitions.
-
[SOLVED]dual boot-Failed to mount real root device
Hello,
Here is my drives partition info:
/dev/sda1 2,949,122,048 3,907,028,991 957,906,944 7 NTFS / exFAT / HPFS
/dev/sda2 2,048 901,117,951 901,115,904 83 Linux
/dev/sda3 * 901,117,952 1,925,115,903 1,023,997,952 f W95 Extended (LBA)
/dev/sda5 901,120,000 901,439,487 319,488 83 Linux
/dev/sda6 901,441,536 905,648,127 4,206,592 82 Linux swap / Solaris
/dev/sda7 905,650,176 1,925,115,903 1,019,465,728 83 Linux
/dev/sda4 1,925,115,904 2,949,122,047 1,024,006,144 7 NTFS / exFAT / HPFS
/dev/sdb1 2,048 2,099,199 2,097,152 83 Linux
/dev/sdb2 2,099,200 53,299,199 51,200,000 83 Linux
/dev/sdb3 53,299,200 73,779,199 20,480,000 83 Linux
/dev/sdb4 73,779,200 224,673,791 150,894,592 7 NTFS / exFAT / HPFS
I installed Opensuse 12.1 on /dev/sda5. It is booting with Grub, working with no problems. The computer boots directly to Grub menu.
THEN, I installed Arch linux (last release) on both sda and sdb following these mounting points:
/dev/sdb1 mounted as /boot Ext2
/dev/sdb2 mounted as / BTRFS
/dev/sdb3 mounted as /usr BTRFS
/dev/sda2 mounted as /home BTRFS
Intstallation went smooth until the end. Installed the bootloader.
Now, I am trying to configure GRUB to boot Arch.
Here is what I added on /boot/grub/menu.lst, in sda5 under Opensuse:
title Arch Linux [/boot/vmlinuz-linux]
root (hd1,0)
kernel /vmlinuz-linux root=/dev/sdb1 ro
initrd /initramfs-linux.img
In Opensuse, i can check that vmlinux and grub/menu.lst are indeed in /dev/sdb1
My /etc/fstab is on /dev/sdb2
=============================== sdb2/etc/fstab: ==========
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda2 /home btrfs defaults 0 1
/dev/sdb1 /boot ext2 defaults 0 1
/dev/sdb2 / btrfs defaults 0 1
/dev/sdb3 /usr btrfs defaults 0 1
With this parameters, i got an message error when booting Arch:
Mounting /dev/sdb1 on /new_root failed: no such device.
Error : failed to mount the real root device.
So, at busybox prompt, I tried this command line :
ramfs # mount -t ext2 /dev/sdb1
Got an error : Can't read /etc/fstab
I tried too to give a uuid adress to sdb1 in my menu.lst file, but it didn't change anything, so I am sure partition number is correct.
It seems to me in fact that GRUB can't find fstab.
Two questions :
-Would it be better in fact to use only 1 GRUB file for both systems? If yes, shall I keep only the grub config from Opensuse?
-What do I wrong with Arch booting? Why can't I boot Arch?
EDIT :1- just realised there is no BOOT flag in my partiton table on /dev/sdb.
2- root is on /dev/sdb2, not sdb1.
1-I toggled my first partition bootable using fdisk
2-changed root to point to /dev/sdb2
Now booting into Arch login
Last edited by gabx (2011-11-22 22:33:09)It was a very simple problem. I used the wrong uuid for my /
Correct entry in 40_custom is:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Arch Linux uuid" {
insmod part_msdos
insmod ext2
search --fs-uuid --no-floppy --set=root 8516fa60-0d45-4f33-b269-817c5290f6cc
linux /vmlinuz26 root=/dev/disk/by-uuid/9f32e668-2548-4ed4-a10b-3fbea66a6d95 ro vga=775
initrd /kernel26.img
Now the boot is working great. Next thing was that my /home and swap was not detected.
That was simply because /etc/fstab was still using /dev/sda etc naming. changing that to uuid solved that part as well.
To use uuid all the way and of cause the correct one solved everything
/Christer
Last edited by agkbill (2011-07-15 16:00:30) -
[SOLVED]sensord.service fails to start
Hi there!
I made a clean Arch install a couple of days ago and I've had problems trying to get sensord to work apropriately. I've went through the troubleshooting of this particular service and googled a lot the last couple of days about this topic but I found nothing really useful (or nothing that I could really understand. Maybe my search terms are not so effective ).
# systemctl status sensord -l
[sudo] password for daniel:
● sensord.service - Log hardware monitoring data
Loaded: loaded (/usr/lib/systemd/system/sensord.service; enabled)
Active: failed (Result: exit-code) since mié 2014-09-03 09:14:04 CLT; 7min ago
Process: 4231 ExecStart=/usr/sbin/sensord -i $INTERVAL -l $LOG_INTERVAL -f daemon (code=exited, status=127)
sep 03 09:14:04 Ophiel sensord[4231]: /usr/sbin/sensord: error while loading shared libraries: librrd.so.4: cannot open shared object file: No such file or directory
sep 03 09:14:04 Ophiel systemd[1]: sensord.service: control process exited, code=exited status=127
sep 03 09:14:04 Ophiel systemd[1]: Failed to start Log hardware monitoring data.
sep 03 09:14:04 Ophiel systemd[1]: Unit sensord.service entered failed state.
This is just a minor annoyance. My system performs great and I have no issues with it. It just annoys the heck out of me to see a service failing in my start up screen.
I don't know if hardware specs or other logs are useful. But if you need more info, just let me know
Thanks in advance.
Last edited by Silex89 (2014-09-03 14:16:15)Silex89 wrote:My system performs great and I have no issues with it
Hmmm ...
Silex89 wrote:This thread is SOLVED.
Really ? Maybe there are services working but unrequested, have a look here:
https://bbs.archlinux.org/viewtopic.php?id=186244
I thought, that you explicitly installed sensord. Do you need a round robin database to visualize graphically your measured values in Nagios e.g. ?
Last edited by midixinga (2014-09-03 18:06:06) -
[solved] acroread suddenly fails silently
I think I must be missing something obvious but I can't think what and searching the wiki and forums hasn't helped. (Probably I'm searching for the wrong things.)
acroread was working fine a couple of days ago. I am using the AUR PKGBUILD file, updated for 9.4.7 according to the instructions in the AUR comments. (9.4.7 is a security update but the package hasn't been updated in a long time.)
The most recent things I've done which might have affected things involve font configuration. I've been working my way through the font config wiki. In particular, I've replaced the default freetype2, fontconfig, libxft with infinality/lcd versions. I've done the same for the lib32- versions of these packages, where applicable.
I have tried rebuilding and reinstalling acroread and the system-wide installation of acroread fonts (just in case). I've also updated the font cache list and the fonts.dir and fonts.scale files.
I first noticed that acroread wasn't working in firefox. Usually, the kpartsplugin opens pdf in acroread in the browser. Now I just get an empty space. (Not a blank page but the grey background behind the page which you don't usually see, I think.) But no sign of acroread. I then tried opening some pdf files on disk from the cli with acroread. I get a general error about not being able to find oxygen-gtk:
(acroread:14245): Gtk-WARNING **: Unable to locate theme engine in module_path: "oxygen-gtk",
However, I always get this and acroread works fine. (I've tried to solve this following hints found on the forums by installing lib32-libxslt and lib32-xcb-util but this didn't make any difference.) oxygen-gtk2 is installed just fine.
Apart from this, the OS switches to the appropriate virtual desktop as though acroread was starting but acroread never starts. I don't get an error message. I just get left at the empty desktop.
No errors are logged in ~/.xsession-errors and I can't find anything in the system log files either (errors.log, everything.log, dmesg, Xorg.0.log etc.).
I tried acroread -info so I could check paths etc. but this also fails silently.
What have I missed? Or how can I obtain more useful error messages from acroread? (i.e. any error messages at all!)
In the meantime, I've also been unable to find out how kpartsplugin decides which applications to use. I wondered if I might persuade it to use okular (the system default for pdfs) instead...
Last edited by cfr (2012-03-06 18:30:30)Thanks for the quick reply. Do you mean installing the older versions of the packages?
lib32-freetype2-2.4.8-1-x86_64.pkg.tar.xz
lib32-gtk2-2.24.8-1-x86_64.pkg.tar.xz
freetype2-2.4.8-1-x86_64.pkg.tar.xz
gtk2-2.24.8-2-x86_64.pkg.tar.xz
I'm the person who asked if that kludge was compatible with having the standard versions installed on the system. No, I haven't tried that.
I think this is a different issue because acroread isn't even starting. I get the crashes usually but not before it even starts.
I'll definitely try this, though, if somebody can tell me what (if anything) I'd need to uninstall to use this...
OK. So this does seem to have worked. Thanks very much for suggesting it. I just hadn't made the connection with the sporadic crashes or remembered that suggestion.
What I did was find these files:
lib32-freetype2-2.4.8-1-x86_64.pkg.tar.xz
lib32-gtk2-2.24.8-1-x86_64.pkg.tar.xz
freetype2-2.4.8-1-x86_64.pkg.tar.xz
gtk2-2.24.8-1-x86_64.pkg.tar.xz
(I used 2.24.8-1 for all of them - don't know if that is bad?) and the corresponding signatures. Downloaded them, checked the signatures and unpacked them. I then ran the post install instructions for the gtk packages. This didn't work for lib32 and I don't think it was necessary for either of them. I copied the corresponding file from the system for lib32 just in case.
I stuck all this in a directory under my home directory. I then adjusted the KDE launcher with an appropriately modified form of the command from the comments, thus creating ~/.local/share/applications/acroread.desktop. (I tried doing this manually but couldn't get KDE to use it.) I then created a sh function along similar lines which will get sourced in all my sh/bash shells. Won't get propagated to tcsh without intervention but I hardly ever use tcsh anyhow....
So I hope most stuff should use the kludge automatically.
Sure would be nice to see this package getting a little attention from somebody who knows what they're doing!
Thanks very much. Unfortunately I rely heavily on acroread as I can't find a replacement so fixing acroread tends to have a depressingly high priority when it (frequently) breaks.
I don't understand what made it so much worse. Presumably infinality versions of freetype are even less to its liking than the current official versions!
Last edited by cfr (2012-03-06 02:21:04) -
Satellite A505-S6025: Win 7 64bit - driver ACPI\TOS1901 fails
I have that problem and my laptop freeze.
If anyone knows what it is and how i can fix it.
thanks!!!
the driver\driver\fwlnk failed to load for the device ACPI\TOS1901\2&daba3ff&2Hi
Install the Toshiba Value Added Package for Win 7 64bit and check if it will solve your problem.
The driver for ACPI\TOS1901 seems to belongs to Value Added Package
As Im not mistaken the Satellite A505-S6025 was released in USA. Therefore you should use the Toshiba US driver page to get the package. -
[SOLVED] ACPI problem - shutdown and battery error
Hi All,
I've installed Arch and it looks cool, but not everything work.
I can't get acpi related infos (like battery state), or turn off my laptop. I tried hard, but i couldn't solve it.
here are some info, if you could help me:
-actually I can reboot flawlessly
-i removed autodetect from the hooks list because its building lasted forever
-lshw : http://pastebin.com/Q6Cy9Ppy
-dmesg : http://pastebin.com/LdFTrmaC
systemctl status systemd-udevd :
● systemd-udevd.service - udev Kernel Device Manager
Loaded: loaded (/usr/lib/systemd/system/systemd-udevd.service; static)
Active: active (running) since cs 2014-11-27 15:49:17 CET; 57min ago
Docs: man:systemd-udevd.service(8)
man:udev(7)
Main PID: 136 (systemd-udevd)
CGroup: /system.slice/systemd-udevd.service
├─136 /usr/lib/systemd/systemd-udevd
├─137 /usr/lib/systemd/systemd-udevd
├─138 /usr/lib/systemd/systemd-udevd
├─139 /usr/lib/systemd/systemd-udevd
├─141 /usr/lib/systemd/systemd-udevd
├─142 /usr/lib/systemd/systemd-udevd
├─143 /usr/lib/systemd/systemd-udevd
├─144 /usr/lib/systemd/systemd-udevd
├─145 /usr/lib/systemd/systemd-udevd
└─146 /usr/lib/systemd/systemd-udevd
nov 27 15:49:17 Arch-AcerTM4500 systemd-udevd[136]: starting version 217
nov 27 15:50:19 Arch-AcerTM4500 systemd-udevd[136]: worker [140] /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/ACPI0001:00/ACPI0002:00 is taking a long time
nov 27 15:50:19 Arch-AcerTM4500 systemd-udevd[136]: worker [145] /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:09/PNP0C09:00/ACPI0001:00/ACPI0002:00 is taking a long time
nov 27 15:52:19 Arch-AcerTM4500 systemd-udevd[136]: worker [140] /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/ACPI0001:00/ACPI0002:00 timeout; kill it
nov 27 15:52:19 Arch-AcerTM4500 systemd-udevd[136]: seq 1138 '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/ACPI0001:00/ACPI0002:00' killed
nov 27 15:52:19 Arch-AcerTM4500 systemd-udevd[136]: worker [145] /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:09/PNP0C09:00/ACPI0001:00/ACPI0002:00 timeout; kill it
nov 27 15:52:19 Arch-AcerTM4500 systemd-udevd[136]: seq 1060 '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:09/PNP0C09:00/ACPI0001:00/ACPI0002:00' killed
Sorry for my strange sentences, i didn't speak or write English a long time ago.
Last edited by vs22 (2015-02-13 09:13:17)I don't know why, but now it works.
Possible reasons:
previously I installed my system from bootstrap and now from the iso
Arch updates
Now I use journaling in ext4 previously not (I've installed both time to usb flash) -
[SOLVED] apache daemon fails to start on boot, but rc.d restart works?
I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web pages, but running "rc.d restart httpd" works just fine. Since I'd rather not start it manually every time I boot, is there a way to fix this? Also, httpd is the last daemon in my DAEMONS array.
/etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#php
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#PHP
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
/etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost laptop
::1 localhost.localdomain localhost
# End of file
Per the wiki, I also tried commenting out the line that reads
LoadModule unique_id_module modules/mod_unique_id.so
Either way, it still fails on boot.
Last edited by pythonscript (2012-06-10 21:14:44)The SIGTERM are from reboots, yes. I'm not absolutely sure that the process isn't running; I just know that I can't access http://localhost immediately upon reboot. I have to restart the httpd daemon, which works fine. How would I be able to tell if it's just hung?
I checked everything.log, and I don't see anything that leaps off the page to me.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1930 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 2 threads of 1 processes of 1 users.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1931 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 3 threads of 1 processes of 1 users.
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: RegisterClient 106d33cade29b1ba713392593689729000000018320001
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689729000000018320001 to session
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): uid = 120
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): pid = 1842
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): App gnome-settings-daemon.desktop registered
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase INITIALIZATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=106d33cade29b1ba713392593689681600000018320000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: started pid:1936
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase RUNNING
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmPresence: adding idle watch
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost kernel: [ 29.003352] wlan0: no IPv6 routers present
Jun 9 17:29:31 localhost NetworkManager[765]: <warn> could not commit DNS changes: (0) Could not replace /etc/resolv.conf: Operation not permitted
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) successful, device activated.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Setting up new connection
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: New client '0x7f9ff0004e60 []'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Initializing client 0x7f9ff0004e60 []
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 []' received RegisterClient(106d33cade29b1ba713392593689681600000018320000)
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689681600000018320000 to session
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Set properties from client '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: ProcessID = '1936'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: sending IPv6 Router Solicitation
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: no IPv6 Routers available
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: sending IPv6 Router Solicitation
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: no IPv6 Routers available
Jun 9 17:29:33 localhost NetworkManager[765]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:40 localhost NetworkManager[765]: <info> (eth0): IP6 addrconf timed out or failed.
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> (wlan0): IP6 addrconf timed out or failed.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: handling signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Got callback for signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Logout called
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: requesting logout
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase RUNNING
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Caught signal 15, shutting down normally.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Done handling signals
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, 9, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: query end session complete
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, c, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: unable to find application for client - not restarting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428a40
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Using ConsoleKit for session tracking
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]')
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received CloseConnection
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x7f9ff0004e60
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000])
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428ac0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: last client disconnected - exiting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Unreffing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disposing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473070
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473150
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gdm-simple-slave[1728]: WARNING: Child process 1832 was already dead.
Jun 9 17:29:43 localhost gnome-session[1970]: EggSMClient-WARNING: Desktop file '/home/ak5791/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2022 of process 2022 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 4 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2023 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 5 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2024 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 6 threads of 2 processes of 2 users.
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jun 9 17:29:44 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
Jun 9 17:29:45 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Successfully made thread 2079 of process 2079 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Supervising 7 threads of 3 processes of 2 users.
Jun 9 17:29:46 localhost pulseaudio[2079]: [pulseaudio] pid.c: Daemon already running.
Jun 9 17:29:48 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jun 9 17:29:48 localhost udisksd[2110]: udisks daemon version 1.94.0 starting
Jun 9 17:29:48 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 9 17:29:48 localhost udisksd[2110]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 9 17:29:48 localhost kernel: [ 46.319778] gnome-shell-cal[2103] trap int3 ip:7ff3f55b85e1 sp:7fff94941890 error:0
Jun 9 17:30:19 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:40:53 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:47:15 localhost kernel: [ 1092.983585] usb 8-1.4.1: new high-speed USB device number 8 using ehci_hcd
Jun 9 22:47:15 localhost mtp-probe: checking bus 8, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4.1"
Jun 9 22:47:15 localhost mtp-probe: bus: 8, device: 8 was not an MTP device
Jun 9 22:47:15 localhost kernel: [ 1093.132002] usbcore: registered new interface driver uas
Jun 9 22:47:15 localhost kernel: [ 1093.135601] Initializing USB Mass Storage driver...
Jun 9 22:47:15 localhost kernel: [ 1093.135785] scsi6 : usb-storage 8-1.4.1:1.0
Jun 9 22:47:15 localhost kernel: [ 1093.135905] usbcore: registered new interface driver usb-storage
Jun 9 22:47:15 localhost kernel: [ 1093.135913] USB Mass Storage support registered.
Jun 9 22:47:16 localhost kernel: [ 1094.137579] scsi 6:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
Jun 9 22:47:16 localhost kernel: [ 1094.140133] sd 6:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB)
Jun 9 22:47:16 localhost kernel: [ 1094.140631] sd 6:0:0:0: [sdb] Write Protect is off
Jun 9 22:47:16 localhost kernel: [ 1094.140634] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 9 22:47:16 localhost kernel: [ 1094.141128] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.141132] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.144916] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.144921] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.146680] sdb: sdb1
Jun 9 22:47:16 localhost kernel: [ 1094.151407] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.151411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.151414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 9 22:47:17 localhost ntfs-3g[2636]: Version 2012.1.15 external FUSE 29
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mounted /dev/sdb1 (Read-Write, label "kingstonGB", NTFS 3.1)
Jun 9 22:47:17 localhost ntfs-3g[2636]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=100,dmask=0077,fmask=0177,uhelper=udisks2
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mount options: rw,nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
Jun 9 22:47:17 localhost ntfs-3g[2636]: Global ownership and permissions enforced, configuration type 7
Jun 9 22:47:17 localhost udisksd[2110]: Mounted /dev/sdb1 at /run/media/ak5791/kingstonGB on behalf of uid 1000
Jun 9 22:47:28 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jun 9 22:47:28 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun 9 22:47:46 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:57:59 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 23:01:02 localhost /USR/SBIN/CROND[5529]: (root) CMD (run-parts /etc/cron.hourly)
Jun 9 23:21:02 localhost -- MARK --
All I notice is that my system's time is having a few problems, since you'll notice that events occur at 22:00 and change, then 17:00 and change, then back to 22:00 and change afterwards. Could this be the problem? I've had the CMOS batteries peg out on me suddenly in the last few weeks. I would hope this sytem is not also suffering a similar fate. Nothing else was happening on my system except for the standard processes from /etc/rc.conf and other standard ones, since I've just been rebooting, checking the logs, then posting here.
Maybe you are looking for
-
ERROR WHILE UPDATING TABLE 'COBK'
DEAR ALL! I am facing the following error while posting goods issue through VL01N and stock posting through MB1C ( m.type 521 without production order ). Table COBK is not updated wile doing those trasactions, this cause the runtime error.how to solv
-
i just want to be able to sync my ipod to my itunes so can have my music but my ipod isnt even conecting to the itunes because of this stupid (AMD) please help, i have the new 11.5 itunes just that will not install
-
How to delete copies in two projects with one master
Hello, I drug images from one project to another, thinking they would be moved. I see that it instead made a copy and now both projects have the same image, but they apparently share the same master. When I choose "delete version" with one of them, t
-
Com.sun.istack.SAXException2: unable to marshal ....
Using JAXB 2.0, I am getting the following Exception while marshalling. The problem is unexpected as I am working with the JAXB generated classes. The classes themselves were generated from XML schemas and the schema compilation was successful. Any h
-
Cleaned up Outlook Contacts override iPhone and iPad
I have a Windows operating system on my computer and use Outlook for Contacts. I own an iPhone and an iPad. I spent hours deleting old contacts from my iPad...didn't quite get through the whole alphabet. Later on I was amazed to find all the old co