[SOLVED] Adjust volume without installing OSS or ALSA?

I decided to try out my first tiling window manager (via Ratpoison) and I installed chromium and flash.
I can listen to music on last.fm via the flashplugin and adjust the volume but the volume is really quiet.
I have not installed alsa or oss, but somehow can adjust my volume via flash.
Is there someway to adjust my volume without installing alsa or oss?
Just curious.
Last edited by action_owl (2011-10-30 17:52:44)

action_owl wrote:
Ah ok, I wasn't aware ALSA was included with Arch!
Thanks
It is included into Linux (i.e. kernel) rather into Arch

Similar Messages

[SOLVED]No sound after installing oss

I am installing oss on my x86_64 pc. But I get the following when I type in " soundon ":
Relinking OSS kernel modules for "3.14.2-1-ARCH SMP preempt mod_unload modversions "
This may take few moments - please stand by...
OSS build environment set up for REGPARM kernels
Building module osscore
Failed to compile OSS
make -C /usr/lib/modules/3.14.2-1-ARCH/build M=/usr/lib/oss/build modules
make[1]: Entering directory '/usr/lib/modules/3.14.2-1-ARCH/build'
Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
CC [M] /usr/lib/oss/build/osscore_wrapper.o
gcc: error：unrecognized command line option ‘-fstack-protector-strong’
scripts/Makefile.build:308: recipe for target '/usr/lib/oss/build/osscore_wrapper.o' failed
make[2]: *** [/usr/lib/oss/build/osscore_wrapper.o] Error 1
Makefile:1274: recipe for target '_module_/usr/lib/oss/build' failed
make[1]: *** [_module_/usr/lib/oss/build] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.14.2-1-ARCH/build'
Makefile:17: recipe for target 'default' failed
make: *** [default] Error 2
Relinking the OSS kernel modules failed.
And the output of "ossdetect -v" is:
#ossdetect -v
Detected AMD High Definition Audio (Hudson)
USB support available in the system, adding USB driver
Detected Generic USB audio/MIDI device (BETA)
Last edited by archwdj (2014-05-09 11:50:33)

Not an installation issue. Moving to NC...
Also, archwdj, welcome to the forums. Please read the forum rules to make yourself aware of them. Use code tags when posting snippets.

Adjusting volume without buttons?

My increasing volume button doesn't work and I need to increase the volume during a phone call urgently. Is there any way I can do this?

Yes it IS possible. Just wanted to correct.
Go to settings>general>accessibility>assistive touch ON
once this is turned on a circle will pop up on the top left.
While you are on a call touch this circle, hit device, then hit volume up.
After its up all the way you can go back to settings and turn the assistive touch off.
I know this post is from a long time ago, but I just had the same problem and there wasn't accurate info out there.

I duplicated a picture and now iPhoto (11) is cloning that picture replacing all the other photos and only when I click directly on them I can see the real picture! How can I solve the problem without losing any saved picture? Shall I re-install? Thanx

I duplicated a picture selecting CMD and D but, suddenly, iPhoto (latest version '11) started cloning that picture and replacing all the other photos with it.
Only when I click directly on one photo I can open it and see the real picture it is.
But the preview is always the duplicated one...
I tryed to duplicate another picture just to see if it turned out ok but the only changement was the duplicated picture!
I started repeating the second duplicated one instead of the previous one but my issue remained the same.
So, how can you help me to solve this problem without losing any saved picture?
Shall I re-install iPhoto completely?
Thank you very very much in advance!!

As Larry says, restoring the back up is the fastest and best solution. Otherwise:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

[solved] gtk3 themes for gtk3 apps, without installing gnome3

After executing "pacman -Syu", transmission was upgraded to a newer version, but it no longer has the "Clearlooks" gtk2 interface wich I installed witch pacman and selected it with "lxappearance" because I don't have gnome2 or 3 installed. Now, transmission has an ugly gtk3 interface that looks like windows 95. But how can I install ans select a gtk3 theme, without installing gnome3 ? (because I only want to keep openbox and xmonad installed, and no other WM or DE)
It says on wiki.archlinux that "gnome-tweak-tool" won't work if gnome3 is not installed...
It also tried to install the "librsvg" package, and the Newlooks theme, and I've edited "~/gtk-3.0/settings.ini" to add:
gtk-application-prefer-dark-theme = false
gtk-theme-name = Zukitwo
gtk-fallback-icon-theme = gnome
... and after reboot, Transmission doesn't have the "Newlooks" gtk theme... it still has the old looking theme
Last edited by Chrys349 (2011-11-26 16:36:53)

I am facing the same problem. I've created ~/.config/gtk-3.0/settings.ini file:
[Settings]
gtk-theme-name = elementary
gtk-fallback-icon-theme = elementary
gtk-toolbar-style=GTK_TOOLBAR_ICONS
Someone also wrote that copying gtk-3.0 folder should enable gtk3 theme, but this also failed.
cp -r /usr/share/themes/elementary/gtk-3.0/ ~/.config/gtk-3.0/

Beginners Guide sound installation -- OSS and ALSA objective features

Beginners Guide sound installation -- OSS and ALSA objective features needed
Hi,
In most wiki pages i just edit the things that i think need editing. Just look at the oss history
In all those cases i didn't really saw a need to ask for permission.. that would kinda destroy the wiki idea.
However i want to change the sound instructions in the beginners guide so i made a copy of the entire guide and the part that i changed there is: http://wiki.archlinux.org/index.php/Use … ling_Sound now i have a slight issue there. As you can see i'm in favor of OSS and because you can spot that it's not objective. Now i would ask 2 things.
1. Could you all post your features of OSS and ALSA
2. Once that's done can i have permission to place that section in the beginners guide? that will also include removing the sound installation from the beginners guide which i already did in my version
My personal reason to do this. i've read this and am since then pro OSS and against the ALSA/PulseAudio combo. i think that combo needs to get out of linux (most notably Fedora and Ubuntu) ASAP. and oss needs to go back into the linux kernel
Thank you for your time,
Mark

ngoonee wrote:
I'm an alsa/pulse user, so I'll give a bit of the 'other side'.
Alsa/pulse
Pros:-
network sound
advanced connection of sink/source (including merging sinks)
bluetooth support!
highly supported by existing apps, either through directly supporting Pulse or through its alsa plugin (you should not need to recompile properly-written apps which do not assume they should write audio data directly to hardware, I think I only needed to recompile mpd on my system)
Cons:-
Setup isn't the easiest. Can't comment vs OSS4 because I haven't tried it
OSS4
Pros:-
Everyone seems to say sound quality is better. I guess that's because they're comparing it with dmix alsa. Use pulse with alsa and you should not notice any difference in sound quality though.
Cons:-
Most apps nowadays default output to alsa. Meaning OSS plays them using an alsa plugin.
USB support is admittedly skimpy.
EDIT: Having read the sound article you referred to, my only comment is that the writer really has it in for Pulse... 3 seconds latency, where'd he get that from? I use pulse for audio recording (when I'm lazy to fire up JACK) and while there IS latency, its definitely in the ms range.
Thanx for the input
Gen2ly wrote:
Gen2ly wrote:...As a side note, do you need libflashsupport here???...
markg85, libflashsupport isn't needed. [1]
pacman -Ql oss | grep flash
If you don't know, please don't put in wiki, this could cause unnecessary problems. As for the mms section:
If your stream sounds ugly in totem like it did with me then you could try to play it with another codec like ffmpeg (mplayer). That "fixed" the issue for me. This will not fix the issue that somehow pops up in gstreamer when playing MMS streams but it will give you the option to play it with good sound quality. Playing it in mplayer is simple:
# mplayer mmsh://yourstreamurl
Could you fix this? ffmpeg is not a codec . Also define ugly, and what is somehow?
markg85 wrote:Thanx a lot for your feedback. i will certainly use it when i make more edits.
As for the things you didn't know. As soon as i fully understand how i can get a microphone working in OSS i will add that to the wiki as well. Unless you already know it.. in that case, feel free to add it.
For the mic, I did get mine going. Can't remember just how I did mine (sorry, think I had to disable one of the inputs), but do remember to prevent it from passing through the speakers had to disable "Misc Microphone".
# ossmix
Selected mixer 0/High Definition Audio ALC888
Known controls are:
jack.green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.green.mute ON|OFF (currently OFF)
jack.black.mode <front|rear|center/LFE|side|pcm4|input> (currently center/LFE)
jack.black [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.black.mute ON|OFF (currently OFF)
jack.orange.mode <front|rear|center/LFE|side|pcm4|input> (currently rear)
jack.orange [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.orange.mute ON|OFF (currently OFF)
jack.gray.mode <front|rear|center/LFE|side|pcm4|input> (currently pcm4)
jack.gray [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.gray.mute ON|OFF (currently OFF)
jack.pink.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.pink [<leftvol>:<rightvol>] (currently 19.9:19.9 dB)
jack.pink.mute ON|OFF (currently OFF)
jack.fp-pink.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-pink.mute ON|OFF (currently OFF)
jack.blue.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.blue [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.blue.mute ON|OFF (currently OFF)
jack.fp-green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-green.mute ON|OFF (currently OFF)
record.mix.mute.mic1 ON|OFF (currently OFF)
record.mix.mute.fp-mic1 ON|OFF (currently OFF)
record.mix.mute.linein1 ON|OFF (currently OFF)
record.mix.mute.fp-headphone1 ON|OFF (currently OFF)
record.mix.mute.green1 ON|OFF (currently OFF)
record.mix.mute.black1 ON|OFF (currently OFF)
record.mix.mute.orange1 ON|OFF (currently OFF)
record.mix.mute.gray1 ON|OFF (currently OFF)
record.mix.mute.input-mix1 ON|OFF (currently OFF)
record.mix1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
record.mix.mute.mic2 ON|OFF (currently OFF)
record.mix.mute.fp-mic2 ON|OFF (currently OFF)
record.mix.mute.linein2 ON|OFF (currently OFF)
record.mix.mute.fp-headphone2 ON|OFF (currently OFF)
record.mix.mute.green2 ON|OFF (currently OFF)
record.mix.mute.black2 ON|OFF (currently OFF)
record.mix.mute.orange2 ON|OFF (currently OFF)
record.mix.mute.gray2 ON|OFF (currently OFF)
record.mix.mute.input-mix2 ON|OFF (currently OFF)
record.mix2 [<leftvol>:<rightvol>] (currently 4.4:2.9 dB)
misc.mic [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
misc.fp-mic [<leftvol>:<rightvol>] (currently 46.4:37.4 dB)
misc.linein [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.fp-headphone [<leftvol>:<rightvol>] (currently 34.4:34.4 dB)
misc.green [<leftvol>:<rightvol>] (currently 34.4:38.9 dB)
misc.black [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.orange [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.gray [<leftvol>:<rightvol>] (currently 40.4:41.9 dB)
misc.input-mix <mic|fp-mic|linein> (currently mic)
misc.front-mute ON|OFF (currently OFF)
misc.input-mix-mute1 ON|OFF (currently OFF)
misc.front1 [<leftvol>:<rightvol>] (currently 43.4:43.4 dB)
misc.front2 <front|input-mix> (currently front)
misc.rear-mute ON|OFF (currently OFF)
misc.input-mix-mute2 ON|OFF (currently OFF)
misc.rear1 [<leftvol>:<rightvol>] (currently 4.4:4.4 dB)
misc.rear2 <rear|input-mix> (currently rear)
misc.center/lfe-mute ON|OFF (currently OFF)
misc.input-mix-mute3 ON|OFF (currently OFF)
misc.center/lfe1 [<leftvol>:<rightvol>] (currently 41.9:41.9 dB)
misc.center/lfe2 <center/LFE|input-mix> (currently center/LFE)
misc.side-mute ON|OFF (currently OFF)
misc.input-mix-mute4 ON|OFF (currently OFF)
misc.side1 [<leftvol>:<rightvol>] (currently 35.9:35.9 dB)
misc.side2 <side|input-mix> (currently side)
misc.pcm4-mute ON|OFF (currently OFF)
misc.input-mix-mute5 ON|OFF (currently OFF)
misc.pcm41 [<leftvol>:<rightvol>] (currently 25.4:25.4 dB)
misc.pcm42 <pcm4|input-mix> (currently pcm4)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
vmix0-channels <Stereo|Multich> (currently Stereo)
vmix0-src <Fast|Low|Medium|High|High+|Production|OFF> (currently Medium)
vmix0-outvol <monovol> (currently 25.0 dB)
vmix0-invol <monovol> (currently 25.0 dB)
vmix0.pcm8 [<leftvol>:<rightvol>] (currently 19.9:19.9 dB) ("knotify4")
vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm11 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
For libflashsupport on the same page you linked it clearly states:
# Flash V9 and V10 require libflashsupport to output sound via OSS. Typically a 32-bit version of the library is required.
# Flash V10 has a 64-bit version which requires a 64 bit libflashsupport.
Also i tested it with and without libflashsupport. On archlinux (x64 running here) there most certainly is a need for libflashsupport when you want to have sound in your flash. And yes i tested the archlinux OSS version and the mercurial version (running now) bith need it installed manually! On my pc sound in flash didn't work without it but did with it. So, no not removing from the wiki as it's needed. But i see you removed it for me! please do NOT do that if you didn't even verified it. I use flash 10 x64 and i need it!
As for the ffmpeg "codec" changed it to backend.
And i did get the microphone working near perfect: http://www.4front-tech.com/forum/viewtopic.php?p=13192
Now for some news you all might like.
On my school i need to do an investigation to whatever i want and i'm heavily thinking about investigating the pros/cons of alsa compared to oss (or oss compared to alsa). That investigation will take from monday next week till next mondey till friday 23 of oktober. In that investigation i'm going to do some in depth look of alsa and oss and that will include the usability as well.
Following up on that investigation i will spend another 8 weeks on my school making a volume control application that can be used with alsa and oss and easily expandable with other sound systems. The goal of this is to make one sound application that can manage (in the first place) alsa and oss. oss is going to be implemented and alsa is probably going to be dummy implemented because it's likely way to much for me to implement both.
Before you get to exited, both projects (investigating and making the application) are just made up today and i just don't know if both will get accepted by my school. I asked one teacher and he liked the idea a lot and could potentially have a value for the sound management under linux. Once i do get this started i will involve the community (YOU!) with this since this project can't be done without the community specially the investigation.
And once i start and have something to tell/ask i will blog about it on http://blog.mageprojects.com
edit::
And this idea already got dumped. read more a few posts down or click: http://bbs.archlinux.org/viewtopic.php? … 34#p612634
Last edited by markg85 (2009-09-03 17:51:45)

Volume showing a lock symbol when trying to adjust volume

Hi, I have a Z10 running 10.3.1.1565 and have the following issue that appeared out of nowhere. When I try to adjust volume it will not adjust the volume and there is a lock symbol next to the volume. Have tried restarting with and without battery pull... but nothing :-(. What is going on and how do I fix?

Have you tried adjusting in Settings >Main Volume?
Do you have Parental Controls enabled?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Audio Codec Error after adjusting volume V 7.02

I get an error reading audio file on playback after using
Adjust Volume tool, Presenter V7.02. I have to re-record the
audio.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56429.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load - it will automatically load an audio driver, but just let it complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to have icons with a WM (without installing a whole DE)

Hi!
I was wondering if it was possible to have desktop icons with TWM/FluxBox/IceWM alone, without installing a desktop environment. As far as I know, file managers do this in DEs but then simply installing a file manager while running a WM doesn't put icons on the screen...
Thank you in advance!

Thank you guys! I actually searched not only through the wiki but tried to google it too. Now I feel sorry to have opened a thread that can be solved with a link from the wiki. Maybe I should have looked better... Nevertheless, thank you for the information.
I was trying to make a lightweight system so looks like nautilus isn't for me (as Trilby said I will need to install gnome too, which is too heavy for my goals). I will however try to make it show the files that are in /user/Desktop/ for the sake of it... I don't like leaving things halfway done! Then I will maybe move on to rox and pcmanfm but one thing is for sure - I LOVE icons and it doesn't matter how lightweight a system is, for me, it is a must to have icons
And about Tdy's responce:
I haven't thought about these icons you said. I actually wanted that everything in /user/Desktop be showed on the desktop but I sure think that those you suggested would come in handy too. I will think about them after I have finished the main task, that is - the /user/Desktop/ thing
Thank you again!

Running a labview installer without installing drivers

Ouch. I have to install multiple LabView programs onto the same machine and they were all compiled with different versions. I don't have the luxury of rebuilding them. When I try installing some of them, the program won't let me install because newer drivers are already installed on the machine. Is there a way of running an installer to install the program without installing the drivers?
Solved!
Go to Solution.

The folder where the installer was placed into should have a bunch of folder in the "bin" folder all starting with "p". These contain the various installers that are run. The actual installer for your executable should be in there somewhere, so you could try running it directly.

Is there any method to use network printer without installing driver?

We have some embeded win7 devices which we cannot install drivers to.
Is there any method to use network printer without installing driver?

Hi,
Please read the following article:
http://en.wikipedia.org/wiki/Device_driver
You definitely need this middle man.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there any methods to use network printer without installing driver?

We have some embeded win7 devices which we cannot install drivers to.
Is there any methods to use network printer without installing driver?

Hi,
Please refer to your other post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/Printing/message-id/77319
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[SOLVED]gnome-volume-manager / hal 0.5.10 - can't deactivate automount

http://wiki.archlinux.org/index.php/HAL
I've created /etc/hal/policy/preferences.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
<device>
<match key="storage.hotpluggable" bool="false">
<match key="storage.removable" bool="false">
<merge key="storage.automount_enabled_hint" type="bool">false</merge>
</match>
</match>
</device>
</deviceinfo>
The article say "Policies" may be deprecated in hal 0.5.10. I doubt that, but i dont know what is deprecated though.
I did check the documentation out, and everything i did still seems to be valid.
http://people.freedesktop.org/~david/ha … ies-volume
Does gnome-volume-manager honor this setting in gnome 2.20?
Last edited by pelle.k (2008-02-04 20:12:51)

It would seem i solved it myself.
First of all, gnome-volume-manager need to be recompiled with a patch i found (ubuntu gutsy); http://patches.ubuntu.com/by-release/ex … hint.patch
Why this isn't included by default in gnome-volume-manager is beyond me!? You bad, bad, gnome devs!
Replace the PKGBUILD when building from ABS.
# Contributor: Link Dupont <[email protected]>
pkgname=gnome-volume-manager
pkgver=2.17.0
pkgrel=3
pkgdesc="GNOME daemon to auto-mount and manage media devices"
arch=(i686 x86_64)
license=('GPL')
url=http://www.gnome.org/
depends=('libgnomeui>=2.20.0' 'libnotify>=0.4.4' 'gnome-mount>=0.6')
makedepends=('nautilus>=2.20.0' 'perlxml' 'pkgconfig')
install=gnome-volume-manager.install
groups=('gnome-extra')
source=(http://ftp.gnome.org/pub/GNOME/sources/${pkgname}/2.17/${pkgname}-${pkgver}.tar.bz2
gvm-mount-async.patch
gvm-check-local.patch
http://patches.ubuntu.com/by-release/extracted/ubuntu/g/gnome-volume-manager/2.17.0-2ubuntu2/02_honour_automount_enabled_hint.patch)
md5sums=('104cec26e721e0bba69debd392367195'
'534b8b9633148bd975b2b9b518c41fb4'
'cb45810b2adb95d39e1272470f10a21a'
'7288a9dc57df321d6a379c9b6a7caaff')
build() {
cd ${startdir}/src/${pkgname}-${pkgver}
patch -Np0 -i ${startdir}/src/gvm-mount-async.patch || return 1
patch -Np0 -i ${startdir}/src/gvm-check-local.patch || return 1
patch -Np1 -i ${startdir}/src/02_honour_automount_enabled_hint.patch || return 1
./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var
make || return 1
make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 DESTDIR=${startdir}/pkg install
mkdir -p ${startdir}/pkg/usr/share/gconf/schemas
gconf-merge-schema ${startdir}/pkg/usr/share/gconf/schemas/${pkgname}.schemas ${startdir}/pkg/etc/gconf/schemas/*.schemas
rm -f ${startdir}/pkg/etc/gconf/schemas/*.schemas
Also, this is my /etc/hal/fdi/policy/preferences.fdi
<match key="storage.hotpluggable" bool="false">
<match key="storage.removable" bool="false">
<merge key="storage.automount_enabled_hint" type="bool">false</merge>
</match>
</match>
If you compare that to my first version, you'll note that it is *not* enclosed in <deviceinfo> and <device> tags, simply because that wouldn't work. Don't ask me why. i'm by no means a HAL expert...
Last edited by pelle.k (2008-02-04 20:12:00)

Can I run a soft without install sql server?

I just wrote a winform C# program and use SQL server 2012 for data.
Can I run this program on other machine without install sql server ?
If I can't. Are there other program simpler than sql server help me run it ?
THANK ALL !

Agree with Nicolas. You need to modify connection string to point to proper server name. This might help in getting proper name of instance.
http://sqlserver-help.com/2011/06/19/help-whats-my-sql-server-name/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Need to download without installing

Hi,
I need to download versions of adobe reader, flash player, shockwave player and air without installing them to the system I am downloading them to. I work for the government and have to copy the applications onto a disk to install them to a secure network not connected to the Internet. How do I obtain copies from your site for this purpose. Thank you
Angelique

Hi alouis,
Sounds like your distributing Flash Player within your org, as such, you'll need to license these products for distribution. Please see the following links for information on licensing the various products for distribution:
Adobe - Adobe Runtimes / Reader Distribution License Agreement
Volume distribution | Adobe Reader XI
Adobe Flash Player Distribution | Adobe
Adobe AIR Runtime Distribution | Adobe
Adobe Shockwave Player Licensing | Adobe
Maria

[SOLVED] Adjust volume without installing OSS or ALSA?

Similar Messages

Maybe you are looking for