[solved] After Gnome 3.8/Kernel update bumblebee is broken
After some troubles with Gnome 3.8 and GDM and getting back to work bumblebee is broken. I guess the troubles came with the new kernel.
$ optirun -vv glxgears
[ 184.945324] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 184.946196] [DEBUG]optirun version 3.1 starting...
[ 184.946228] [DEBUG]Active configuration:
[ 184.946239] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 184.946250] [DEBUG] X display: :8
[ 184.946260] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 184.946271] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 184.946281] [DEBUG] Accel/display bridge: auto
[ 184.946291] [DEBUG] VGL Compression: proxy
[ 184.946332] [DEBUG]Using auto-detected bridge virtualgl
[ 184.974394] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 184.974451] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 184.974471] [DEBUG]Socket closed.
[ 184.974531] [ERROR]Aborting because fallback start is disabled.
[ 184.974536] [DEBUG]Killing all remaining processes.
$ systemctl status bumblebeed
bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled)
Active: active (running) since Mi 2013-04-24 20:00:21 CEST; 4min 40s ago
Main PID: 264 (bumblebeed)
CGroup: name=systemd:/system/bumblebeed.service
└─264 /usr/sbin/bumblebeed
$ cat /proc/acpi/bbswitch
0000:01:00.0 ON
I made a fresh reinstallation of bumblebee but it does not help. All packages inkl. bbswitch are up to date (whole system is up to date). Thx for any hints.
Last edited by wwn (2013-04-24 18:20:33)
aaarrrrgh: that was the thing to get gdm and gnome 3.8 get back to work again.!
devil and the deep blue see
Similar Messages
-
[SOLVED] no timidity service + pulse, kernel update (3.16.3-1)
I had sound working before upon boot, but sound was failing after resume from suspend on HP dv7 laptop. I hadn't gotten around to figuring out how to store alsa state (what I believe to be the solution to sound failing after suspend). My install is about a week old. I ran pacman -Syu to get into the habit of doing so. Now I know why it is suggested to not do the updates when you don't have time to fix things that might need to be fixed.
alsamixer is not muted, but I only see master channel as user or root - selecting the Intel PCH sound card within alsamixer allowed me to see the other channels, but speaker-test remained silent. But I have been consistently seeing PCH Transcoder A errors on boot. Wasn't sure what they were, since everything had worked prior to kernel update. Investigating sound yields my hardware is Intel PCH, so these errors may be important, but I am also unsure how to access any log they might be recorded in.
EDIT: speaker-test and timidity work in single user console mode, but not in KDE.
[mark@arch-hpdv7t-laptop ~]$ uname -a
Linux arch-hpdv7t-laptop 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64 GNU/Linux
[mark@arch-hpdv7t-laptop ~]$ aplay -Ll
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, 92HD91BXX Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, 92HD91BXX Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD91BXX Analog [92HD91BXX Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[mark@arch-hpdv7t-laptop ~]$ lspci -vvnn | grep -A1 '040[1-3]'
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:1818]
[mark@arch-hpdv7t-laptop ~]$ cat /proc/asound/modules
0 snd_hda_intel
[mark@arch-hpdv7t-laptop ~]$ for i in $(awk '{print $2 | "sort"}' /proc/asound/modules | uniq); do echo "--- $i ---"; systool -vm $i; done
--- snd_hda_intel ---
Module = "snd_hda_intel"
Attributes:
coresize = "26327"
initsize = "0"
initstate = "live"
refcnt = "3"
taint = ""
uevent = <store method only>
Parameters:
align_buffer_size = "-1"
bdl_pos_adj = "1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
beep_mode = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
enable_msi = "-1"
enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
jackpoll_ms = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
model = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
patch = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
position_fix = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
power_save = "0"
power_save_controller= "Y"
probe_mask = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
probe_only = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
single_cmd = "N"
snoop = "Y"
Sections:
.bss = "0xffffffffa038fa80"
.data = "0xffffffffa038f000"
.data.unlikely = "0xffffffffa038f7d0"
.exit.text = "0xffffffffa038c930"
.gnu.linkonce.this_module= "0xffffffffa038f800"
.init.text = "0xffffffffa0392000"
.note.gnu.build-id = "0xffffffffa038d000"
.rodata = "0xffffffffa038d040"
.rodata.str1.1 = "0xffffffffa038df02"
.rodata.str1.8 = "0xffffffffa038e2e0"
.smp_locks = "0xffffffffa038e618"
.strtab = "0xffffffffa0395508"
.symtab = "0xffffffffa0393000"
.text = "0xffffffffa038a000"
__mcount_loc = "0xffffffffa038e848"
__param = "0xffffffffa038e628"
__verbose = "0xffffffffa038f640"
[mark@arch-hpdv7t-laptop ~]$ lsmod | grep ^snd
snd_seq_dummy 12503 0
snd_hrtimer 12604 1
snd_seq 61165 5 snd_seq_dummy
snd_seq_device 13132 2 snd_seq,snd_seq_dummy
snd_hda_codec_hdmi 45117 1
snd_hda_codec_idt 56908 1
snd_hda_codec_generic 63126 1 snd_hda_codec_idt
snd_hda_intel 26327 3
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 4 snd_hrtimer,snd_pcm,snd_seq
snd 69340 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
[mark@arch-hpdv7t-laptop ~]$ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/seq: mark 651 F.... rosegarden
I discovered sound did not work after rebooting to restart sound for Rosegarden. Rosegarden was still open when I started running these diagnostics. speaker-test does not work either. The above fuser command returned nothing after closing Rosegarden, but speaker-test remained silent.
[mark@arch-hpdv7t-laptop ~]$ for i in /proc/asound/card[0-9]*; do echo "--- $i ---";amixer -c $(cat $i/id); done
--- /proc/asound/card0 ---
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 127
Mono: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 1 [33%] [-12.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 28 [61%] [12.00dB] [on]
Front Right: Capture 28 [61%] [12.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 120 [100%] [30.00dB]
Front Right: Capture 120 [100%] [30.00dB]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Loopback Mixing',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Any ideas on what I should do? Also, why did my sound break, and what should I do to prevent sound from breaking in future kernel updates?
Last edited by mek42 (2014-10-03 23:38:31)Since it appears that my issue is a KDE issue, not ALSA, I'm working through the troubleshooting on the Pulse wiki page here.
automute mode is off and alsactl store was run.
[mark@arch-hpdv7t-laptop ~]$ pacmd list
Memory blocks currently allocated: 1, size: 63.9 KiB.
Memory blocks allocated during the whole lifetime: 427, size: 7.1 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: auto_null
Default source name: auto_null.monitor
Memory blocks of type POOL: 1 allocated/284 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/0 accumulated.
Memory blocks of type IMPORTED: 0 allocated/143 accumulated.
28 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "5.0"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "5.0"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "5.0"
index: 4
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: no
properties:
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "5.0"
index: 6
name: <module-jackdbus-detect>
argument: <channels=2>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is started"
module.version = "5.0"
index: 7
name: <module-bluetooth-policy>
argument: <>
used: -1
load once: yes
properties:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added, load module-loopback"
module.version = "5.0"
index: 8
name: <module-bluetooth-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "5.0"
index: 9
name: <module-bluez5-discover>
argument: <>
used: -1
load once: yes
properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "5.0"
index: 10
name: <module-esound-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ESOUND protocol (UNIX sockets)"
module.version = "5.0"
index: 11
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
index: 13
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "5.0"
index: 14
name: <module-rescue-streams>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
module.version = "5.0"
index: 15
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "5.0"
index: 16
name: <module-null-sink>
argument: <sink_name=auto_null sink_properties='device.description="Dummy Output"'>
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Clocked NULL sink"
module.version = "5.0"
index: 17
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "5.0"
index: 18
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "5.0"
index: 19
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "5.0"
index: 20
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "5.0"
index: 21
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "5.0"
index: 22
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "5.0"
index: 23
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
index: 24
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "5.0"
index: 25
name: <module-device-manager>
argument: <do_routing=1>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
module.version = "5.0"
index: 26
name: <module-x11-publish>
argument: <display=:0>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "5.0"
index: 27
name: <module-x11-xsmp>
argument: <display=:0 session_manager=local/arch-hpdv7t-laptop:@/tmp/.ICE-unix/505,unix/arch-hpdv7t-laptop:/tmp/.ICE-unix/505>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "5.0"
index: 28
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "5.0"
1 sink(s) available.
* index: 0
name: <auto_null>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 344 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
module: 16
properties:
device.description = "Dummy Output"
device.class = "abstract"
device.icon_name = "audio-card"
1 source(s) available.
* index: 0
name: <auto_null.monitor>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 344 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 0
module: 16
properties:
device.description = "Monitor of Dummy Output"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
7 client(s) logged in.
index: 0
driver: <module-systemd-login.c>
owner module: 20
properties:
application.name = "Login Session c1"
systemd-login.session = "c1"
index: 4
driver: <module-x11-xsmp.c>
owner module: 27
properties:
application.name = "XSMP Session on KDE as 101df1e21b716d000141143608300000005050006"
xsmp.vendor = "KDE"
xsmp.client.id = "101df1e21b716d000141143608300000005050006"
index: 9
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "libphonon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "29"
application.process.id = "439"
application.process.user = "mark"
application.process.host = "arch-hpdv7t-laptop"
application.process.binary = "kdeinit4"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5f1cda9817244627aba0e14b41d436b3"
application.process.session_id = "c1"
index: 15
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "KMix"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "29"
application.process.id = "998"
application.process.user = "mark"
application.process.host = "arch-hpdv7t-laptop"
application.process.binary = "kdeinit4"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5f1cda9817244627aba0e14b41d436b3"
application.process.session_id = "c1"
index: 17
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "KNotify"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "29"
application.icon_name = "knotify"
phonon.streamid = "{137cb52a-2afc-4ddd-882c-601c32129b54}"
media.role = "event"
application.process.id = "600"
application.process.user = "mark"
application.process.host = "arch-hpdv7t-laptop"
application.process.binary = "knotify4"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "5f1cda9817244627aba0e14b41d436b3"
application.process.session_id = "c1"
index: 18
driver: <protocol-native.c>
owner module: 11
properties:
application.name = "KNotify"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "29"
application.id = "org.VideoLAN.VLC"
application.version = "2.1.5"
application.icon_name = "knotify"
application.language = "en_US.UTF-8"
application.process.id = "600"
phonon.streamid = "{137cb52a-2afc-4ddd-882c-601c32129b54}"
media.role = "event"
application.process.user = "mark"
application.process.host = "arch-hpdv7t-laptop"
application.process.binary = "knotify4"
window.x11.display = ":0"
application.process.machine_id = "5f1cda9817244627aba0e14b41d436b3"
application.process.session_id = "c1"
index: 20
driver: <cli.c>
owner module: 28
properties:
application.name = "UNIX socket client"
0 card(s) available.
0 sink input(s) available.
0 source output(s) available.
0 cache entrie(s) available.
fluidsynth (needed for Rosegarden) has been told to use pulseaudio instead of alsa directly (as per https://bbs.archlinux.org/viewtopic.php?id=154002 )
What worked to get speaker-test running in Konsole: adding -D to:
ExecStart=/usr/bin/timidity -iA
to become
ExecStart=/usr/bin/timidity -iAD
in /usr/lib/systemd/system/timidity.service (as per: https://bbs.archlinux.org/viewtopic.php?id=149339&p=2 post 29)
Additionally, I was able to see a default audio device in KDE system settings...multimedia instead of just dummy device. However, even after preferring the default audio device for everything (and it tests fine), Rosegarden still has no volume. Timidity in Konsole plays audibly now too. I am now going to reboot and see what the status is.
Last edited by mek42 (2014-09-23 02:41:53) -
[Solved] After upgrading system/VIrtualbox kernels won't load
After running an update on my system and trying to use Virtualbox I recieve this:
============================================================
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.16.4-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed.
VBoxHeadless: Error -1908 in suplibOsInit!
VBoxHeadless: Kernel driver not installed
VBoxHeadless: Tip! Make sure the kernel module is loaded. It may also help to reinstall VirtualBox.
============================================================
I have tried to reinstall virtualbox and the kernels, I've manually reloaded my kernel modules, and I still have no luck.
Does anyone have any ideas?
Last edited by cynicalpsycho (2014-10-25 20:19:22)Solution: Reboot system.... *Facepalm*
-
Mounting issues after kernel update (2.6.25)
After installing the recent kernel update, mounting has gone haywire. When I put in a cd (in either of my 2 drives) it doesn't mount. In thunar, when I click on the cd drive, it displays this error:
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
I did dmesg | tail and I got this:
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1044216k swap on /dev/sda5. Priority:-1 extents:1 across:1044216k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
UDF-fs: No VRS found
Also, when booting a few minutes ago, it was stuck on the "checking filesystems" for a few minutes, when it usually does that step almost immediately. I also couldn't mount an iso, this is what happened:
[root@eric-arch eric]# mount -o loop -t iso9660 /path/to/iso.iso /mnt/iso2
mount: could not find any device /dev/loop#
Note: I am not certain that it was caused by the kernel update, but that is the only thing I did to my machine before this started happening.
Please help asap because I need to do schoolwork which is on a cd.jealma wrote:I know the solution to the /dev/loop-problem. The new 2.6.25 kernel has the loop device as a module. Please try a `modprobe loop`, that gives you a /dev/loop. I don't know whether that will be persistent after a reboot, so you may need to add "loop" to the modules-list in /etc/rc.conf.
That worked, but I still have other issues with cd mounting, so I downgraded my kernel for now. -
Kernel Update to 3.10.9-1 Causes HIDs to load slowly.
After preforming the latest kernel update (3.10.9), all of my USB keyboards and mice load after ~10 minutes. Here is the snipped dmesg output:
[ 99.570290] usb 5-1: device descriptor read/64, error -110
-- SNIP --
[ 114.769866] usb 5-1: device descriptor read/64, error -110
[ 114.979662] usb 5-1: new full-speed USB device number 3 using uhci_hcd
[ 130.075878] usb 5-1: device descriptor read/64, error -110
[ 145.275440] usb 5-1: device descriptor read/64, error -110
[ 145.485294] usb 5-1: new full-speed USB device number 4 using uhci_hcd
[ 150.499773] usb 5-1: device descriptor read/8, error -110
[ 155.613141] usb 5-1: device descriptor read/8, error -110
[ 155.821501] usb 5-1: new full-speed USB device number 5 using uhci_hcd
[ 160.836425] usb 5-1: device descriptor read/8, error -110
[ 165.949789] usb 5-1: device descriptor read/8, error -110
[ 166.051126] hub 5-0:1.0: unable to enumerate USB device on port 1
-- SNIP --
[ 166.720668] usb 4-3: USB disconnect, device number 2
[ 167.190333] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 167.593385] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 167.823830] hidraw: raw HID events driver (C) Jiri Kosina
[ 167.846684] usbcore: registered new interface driver usbhid
[ 167.846689] usbhid: USB HID core driver
[ 167.850429] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input12
[ 167.850976] hid-generic 0003:1532:010D.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1a.1-1/input0
[ 167.856697] input: Razer Razer BlackWidow Ultimate as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.1/input/input13
[ 167.857132] hid-generic 0003:1532:010D.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate] on usb-0000:00:1a.1-1/input1
[ 167.859559] input: Razer Razer
[ 167.860132] hid-generic 0003:1532:010D.0003: input,hidraw2: USB HI
[ 167.860331] input: Microsoft Microsoft Basic Optical Mous
[ 167.861462] hid-generic 0003:045E:00CB.0004: input,hidraw3: USB H
[ 300.211887] mce: [Hardware Error]: Machine checkMight have better luck posting to lkml. Perhaps related, perhaps not... your mce error at 300 sec is symptomatic of a bad overclock:
https://wiki.archlinux.org/index.php/Stress_Test
...but you did say this started to happen after the update to 3.10.9-1 so I'm not sure... can you downgrade and make it go away? Note that there is a trivial difference between .9 and .8.
Last edited by graysky (2013-08-25 07:29:03) -
[Solved] Nvidia after kernel update
The nvidia wiki clearly states that: "Every time the kernel26 package is updated, it is a requirement to reinstall the nvidia package and rebooting afterwards. "
But my question is, why? I mean, if the module was to be recompiled, that would make sense. But what does just reinstalling the driver accomplish? In my system, pacman -Ql nvidia shows:
$ pacman -Ql nvidia
nvidia /etc/
nvidia /etc/modprobe.d/
nvidia /etc/modprobe.d/nouveau_blacklist.conf
nvidia /lib/
nvidia /lib/modules/
nvidia /lib/modules/2.6.35-ARCH/
nvidia /lib/modules/2.6.35-ARCH/kernel/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/nvidia.ko
From what I've read, I think the kernel update process copies the compiled modules into the proper folder (inside /lib) named by the kernel version. Should this not be the case with nvidia? If it is not, then is this why the reinstall is needed?
Thanks in advance (and my apologies if I've glossed over something that's patently obvious --- while I've searched for the answer before posting, I am still quite the novice at tinkering with the kernel)
EDIT: just after posting I've realized that maybe this post belongs in "Kernel and Hardware Issues" subforum. But the truth is this isn't really an "issue"... it's more a question from, well, a newbie :-)
Last edited by gauthma (2010-09-28 21:53:04)gauthma wrote:
Thank you for the feedback.
ngoonee wrote:Of course, if you're using nvidia-beta or some other AUR nvidia driver, you need to reinstall it.
Running the risk of asking what might be obvious to some, why?
The driver speaks to the kernel. When the kernel updates, the language used might have changed in various ways. Since nvidia is closed-source, its not always obvious whether what has changed affects it. The same applies to xorg-server, when it updates you should recompile your nvidia driver. Its SOMETIMES not needed, but when it is, would you rather be solving it from the tty?
quathma wrote:
ngoonee wrote:That's what the wiki is referring to. Even if the kernel major version has not updated (for example 2.6.35.5 to 2.6.35.6 is only a minor version bump) the driver may need to be recompiled. Safer to just do it everytime and restart the machine.
Now I'm confused. Are you saying that the safest approach is to recompile and (re)install the nvidia module after each kernel update? And does this only apply to modules from beta & AUR, or [extra] as well? And shouldn't all this issue of recompiling modules also apply to every other module installed in the system?
Yes that's the safest approach. [extra] is taken care of by the devs, the simple way is to assume they'll bump it if needed (and you don't need to do anything).
The same thing applies to almost any kernel module (AFAIK). It applies to virtualbox's modules, for sure, as well as phc-intel (the only other 2 external modules I use). Most kernel modules are actually compiled in to the kernel26 package anyway, so its not very many. I just automatically recompile the ones I use whenever I notice a kernel/xorg update. -
[Solved] Can not build modules for VMware Player after kernel updates
I have a problem generating the modules for VMware Player after kernel updates. I am using VMware Player version 5.02 (without patches) and the softlink according to the Wiki.
When I start the installation of the modules from the GUI, the program just closes. Running vmware-modconfig in the CLI generates the following log file:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Log for VMware Workstation pid=7478 version=9.0.2 build=build-1031769 option=Release
2013-04-29T09:49:27.891+01:00| vthread-3| I120: The process is 64-bit.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host is Linux 3.8.10-1-ARCH 2012.11.29
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-7478.log
2013-04-29T09:49:27.892+01:00| vthread-3| W110: Icon name must be set.
Interestingly, after deinstallation and reinstallation the VMWare Player works fine.
Any hint, what's going wrong?
Last edited by Thomas_Do (2013-08-07 07:25:51)Today, (Kernel 3.10.5-1, VMware Player version 5.02 with kernel patches) the modules could successful be generated from the CLI:
vmware-modconfig --console --install-all
Solved (somehow). -
[Solved] Overheating/fan/sensors issues after kernel updates
Hi all,
I realise there has been a bit of correspondence on this already. I'm after some advice for my specific situation:
1. My laptop is an acer aspire 5315. I has well understood overheating issues that arrise due to BIOS problems
2. Fan control and temperature reporting worked perfectly with kernel 2.6.30, stopped working with 2.6.31 - I assume due to the well documented changes made in that release. The temperature only seems to be read once - at boot. sensors never reports a change after that; if the temperature is cold at boot the fan never get switched on. Unfortunately this happens most often.
3. I tried setting the recommended kernel option (can't relocate the post now). It didn't help :-?
4. I have tried upgrading the BIOS but the distribution from acer is a windows executable (won't run under freeDOS) and I do not have windows installed on this PC (not game to try under wine).
5. I re-installed the old kernel from my pacman cache only to find that my wireless no longer works (fan works just fine though).
I'm now totally stumped :-/
I'd like to update my bios and go with the latest kernel but can't see a way without installing windows.
This might be fixed in an ubuntu kernel release (https://bugs.launchpad.net/ubuntu/+sour … bug/453700) but I'd prefer not to do that switch... perhaps the same fix is coming to arch?
I'd accept having to pin the kernel to an earlier version but neet to get the wireless working.
help...
edit:
I've now managed to get the kernel backdated correctly (so that wireless works as well as the fan) by re-installing the kernel and firmware together.
Have configured pacman to igmore future kernel updates
If anyone has any suggestions on howto update my bios I'd be very greatful.
Last edited by drandre (2009-11-06 13:26:46)Hi,
Got exactly the same issue, after running for a while laptop justs goes off... going to try to regress kernel until issue is resolved
BIOS update does sound a bit extreme
MrG -
Automatic recompiling of kernel module after kernel update.
Hello everyone,
i tried to search for it but without success...
my question is - is it possible to set it up somehow that aur package would recompile after kernel update?
The package I would like to rebuild is rt3090 which is module for my wifi card. It is very annoying to rebuild it manually. I know that my fglrx module does it automaticaly but how to set it?
Thank all of you for any advise.Thank you :-) It looks ok, I will try DKMS as soon as I get some free time. If there was any problem, I would tell you.
BTW: I use catalyst mainly because of saving energy management, which is of course better for my netbook. My card is too new to be fully supported by the opensource driver.
EDIT:
I solved the situation by upgrading my system, I tried in-kernel module rt2800pci. In the previous kernels it didn't work well with my crappy ralink rt3090 wifi card, but that's been improved :-) so I do not need rebuild the package anymore even because this module isn't compatible with newest kernel.
I also learnt how to write my own hook from archwiki (https://wiki.archlinux.org/index.php/Mkinitcpio) so if the new module didn't work I would try it.
The final solution = replace module rt3090sta by rt2800pci.
Thanks! Arch has very powerful community :-)
Last edited by h@lf@rk (2012-06-02 18:34:17) -
Problems with key shortcuts after kernel update (can't shutdown wifi)
Hi! Sorry for my poor english!
I have 2 problems on my laptop that went out after a kernel update; the first one involves the wireless card (Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01), but I don't think it is important): when I press the key shortcut it switches off only partially, the led remains lighted and with "rfkill list all" i get that is actually only software blocked.
The second problem is about the key shortcut to switch off the screen: even with xev it isn't recognised anymore.
I am pretty sure the 2 problems are related; the latest kernel with they were working is 3.5.6-1, in fact if I downgrade to that version I haven't got any problem.
I have encountered this issue with 3 models of Asus EEEPC: 1015pd (mine), 1215b and 1015cx, (the first two with AR9285, the third with AR9485).
Thanks for the help ;-)Ok, so after removing catalyst-test and trying to install catalyst, I got the following error:
resolving dependencies...
warning: cannot resolve "catalyst-utils", a dependency of "catalyst"
:: The following package cannot be upgraded due to unresolvable dependencies:
catalyst
Proceeding to try installing catalyst-utils... -
No sound after (kernel)update 64bit
Hey I just rebooted my PC the first time after the new kernel update.
Now sound is not working anymore at all... But the soundcard (Audigy 2 ZS) is still recognized (e.g. via alsamixer), and kmix does not give any error message. Everything seems to work fine, except the fact that there is no sound. Of course I already checked if I muted anything by mistake. Sound is working on Vista (dualboot), so the hardware is alright.
Any hint what could be the problem?
PS: I stressed the kernel update in the first line, because I strongly suspect it for being the cause of the problem. The other updates were not that important (samba...).
But I would like to hear other opinions.
Greetings, yodo
Edit: Ok, I manually compiled and installed an older kernel (kernel26-2.6.27.8-1) and sound is working again. It was definitly the kernel's fault! The version(s) I had (have) problems with were kernel26-2.6.27.10-1 and also kernel26-2.6.27.9-1 which I tried before kernel26-2.6.27.8-1.
Any other users with the same problem?
Last edited by yodo (2008-12-24 11:58:14)Black Mage wrote:I filled a bug report:
http://bugs.archlinux.org/index.php?do= … k_id=12561
happened to me two..
Thanks! But actually rebuilding the kernel did not fix anything (for me) - at least not rebuilding kernel26-2.6.27.10-1 or kernel26-2.6.27.9-1. Sound only works after a downgrade to kernel26-2.6.27.8-1 (or below I suppose).
Last edited by yodo (2008-12-24 16:59:43) -
Wireless issues after kernel update
Hi,
after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
the output of iwconfig:
lo no wireless extensions.
eth0 IEEE 802.11bg ESSID:"" Nickname:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:off
Retry min limit:7 RTS thr:off Fragment thr:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth1 no wireless extensions.
but if I try to run 'iwlist eth0 scan' it states:
eth0 Failed to read scan data : Invalid argument
I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
thanks for any inputs,
tobilitemotiv: 'lspci | grep Network' :
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
.:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
at the bottom what's that "wl taints kernel"
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: PC Speaker as /devices/platform/pcspkr/input/input1
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
lib80211_crypt: registered algorithm 'TKIP'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
uhci_hcd: USB Universal Host Controller Interface driver
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: acpi_idle registered with cpuidle
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (off-line)
Monitor-Mwait will be used to enter C-1 state
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
wmi: Mapper loaded
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:0c:00.0: setting latency timer to 64
usb 1-5: new high speed USB device using ehci_hcd and address 2
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
thermal LNXTHERM:00: registered as thermal_zone0
and maybe
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
tobi -
Wireless very slow and/or unstable after Kernel update to 3.13
I have a "fresh" install from 2 weeks ago. It was installed with Kernel 3.12. I have a rtl8192cu, it was dreadful, so as recommended I installed dkms-8192cu and everything was perfect.
After the upgrade to Kernel 3.13, both with the standard driver and with dkms-8192cu my connection is very slow or unstable.
As an example, in theory I have 20m, with 3.12 I was around 14m. With 3.13 I am around 1m or less, I can barely update my system because:
error: failed retrieving file 's-nail-14.6.1-1-x86_64.pkg.tar.xz' from archlinux.polymorf.fr : Operation too slow. Less than 1 bytes/sec transferred the last 10 seconds
Wired everything goes fine.
I cannot downgrade to 3.12 because I need the new radeonsi improvements done with 3.13. I have this computer mostly to play Dota2.Rexilion wrote:
I misread that the in kernel driver of v3.12 was working properly. THat way you can figure out what exact change broke performance by testing different development kernels.
There is an in-kernel driver in staging called rtl8192u. It received a lot of changes in v3.12. Maybe try v3.11 and see if that works?
it didnt work in kernel 3.12, but with https://aur.archlinux.org/packages/dkms-8192cu/ it worked perfect
in kernel 3.13 it is horrible both witht he stock driver or with the AUR package. -
After last kernel update OpenGL not working (radeonsi)
uname -a
Linux arch 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:41:39 CEST 2014 x86_64 GNU/Linux
Just updated the Kernel and Steam and the games are not loading and giving me opengl errors. This didn't happen just before I updated the kernel.
When opening Steam I get this error:
OpenGL GLX context is not using direct rendering, which may cause performance problems.
For more information visit https://support.steampowered.com/kb_art … -EYZB-7457.
When launching a game (Dota2) I get this error:
Could not find the required OpenGL entry point 'glGetError'! Either your video card is unsupported, or your OpenGL driver needs to be updated.
As said, this happened just after the Kernel update. I just reinstalled it and there's no error or anything.I'm on Nvidia hardware but I'm also suddenly getting the same error after an update so it seems likely this is related. Per your suggestion I downgraded the kernel (and I know it worked with this version):
uname -a
Linux ShawkatArch 3.14.2-1-ARCH #1 SMP PREEMPT Sun Apr 27 11:28:44 CEST 2014 x86_64 GNU/Linux
but I'm getting the same error. However my glxinfo indicates direct rendering is OK:
glxinfo | grep direct
direct rendering: Yes
glxinfo32 | grep direct
direct rendering: Yes
Portion of Steam errors:
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/home/cookcd/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib32/xorg/modules/dri/nouveau_dri.so))
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
Last edited by cookcd (2014-05-16 07:44:53) -
[SOLVED] Arch - Kernel Update = problem
With the new kernel update when using winetricks to install for instance dotnet20, i always get:
libgcc_s.so.1 must be installed for pthread_cancel to work....
Was working......any ideas to solve this one....
Thanks
PS: STUPID ME, it was missing the multilib lib32-gcc-libs...yeah i know....
Last edited by Sniffer (2011-01-11 18:44:00)ishaanbahal wrote:
hjpbarcelos wrote:
Same laptop here, I get this error, but when I run:
DRI_PRIME=1 glxspheres64
Graphic card seems to be working fine, since it runs at 200+ fps.
With:
DRI_PRIME=0 glxspheres64
I get ~60 fps.
So the issue just disappears?? If so I will try this..
gundamfj wrote:found 2 bug reports
https://bugs.freedesktop.org/show_bug.cgi?id=77244
https://bugzilla.kernel.org/show_bug.cgi?id=71891
The bug report seems to be active, so we will have to wait for a while for the patch... Although there is a proposed patch that seems to remove the UVD error, have you tried it??
I quote a comment "Nopes. It makes the UVD errors go away, but the boot still gets stuck at the same point. Everything hangs up, requiring me to do a hard reboot."
The patch did not fix the bug. Honestly, the bug has been there since kernel 3.11.
Maybe you are looking for
-
When I view calendar in YEAR format, it doesn't highlight the days that have an appt. scheduled. Once I upgraded, this option disappeared. Is there a format change I can make? It was helpful to see whole Year With highlighted days.
-
Can I use my TV as a separate display using ATV
Would ATV let me simply use my TV as a separate monitor for my laptop? Thanks
-
How do I add an invite to share calendars from a family member iPhone 5c?
How do I add an invitation to share calendars to a family member 5c iPhone?
-
Packet shaper needed? recommendations?
Anyone running a packet shaper on Internet circuit? We have 250meg connection while we don't max connection out. Just curious what everyone is doing to control http traffic. We have content filter but it doesn't do much along bandwidth.... Any vendor
-
I forgot passcode on my iphone5 and tried to restore it through itunes on my PC. However it gave me an error message saying that that my phone could't be restored due to an unknown error. Now my phone does't turn off and it doesn't sync with itunes.