SOLVED-after reboot i got "Loading initial ramdisk" and then it stuck.
before it happened i did pacman -Syu and it did installed couple of things but i didn't see what.
i remember that it installed new "sudo".
it installed couple more but again, i didn't look so i can't say what .
also, before it happened i tried to see files on my phone using obexfs(didn't succeed).
from here:
https://wiki.archlinux.org/index.php/bluetooth#ObexFS
i made folder moto-g(this is my phone) in /mnt
so now i had /mnt/moto-g
then i ran this command:
obexfs -b devices_MAC_address /mountpoint
of course i changed the MAC and mountpoint to the right ones
it worked(didn't get error) but i could not see my files in my phone using nautilus.
then i rebooted to windows(i have dual boot arch and windows), connect my moto g to the computer using usb cable, got the picture i want from the phone, disconnect the phone from the usb cable, but the cable was still connected to the computer, and then reboot again to archlinux.
and now i can't get into arch anymore.
when i boot to arch it says:
booting arch linux
loading linux linux
loading initial ramdisk
and then it stuck and stay there.
i tried to insert live cd of arch and boot from it, but i can't.
when i try to boot from live cd, i get into this lines:
decompressing linux... parsing ELF... done
booting the kernel
and then it stuck.
it stays there and nothing happen.
what can i do to solve this?
thanks!
Last edited by andav (2014-09-28 10:42:31)
i did pacman -Syu couple of days ago, before this last system update.
this is what i installed in the latest update.
from pacman.log (i'm using ubuntu live cd to see this, because arch live cd doesn't work now)
after this update i could not get into arch again:
[2014-09-28 00:01] [PACMAN] Running 'pacman -Syu --ignore curl'
[2014-09-28 00:01] [PACMAN] synchronizing package lists
[2014-09-28 00:01] [PACMAN] starting full system upgrade
[2014-09-28 00:03] [PACMAN] upgraded accountsservice (0.6.37-1 -> 0.6.38-1)
[2014-09-28 00:03] [PACMAN] upgraded apr-util (1.5.3-4 -> 1.5.4-1)
[2014-09-28 00:03] [PACMAN] upgraded bash (4.3.024-1 -> 4.3.026-1)
[2014-09-28 00:03] [PACMAN] upgraded ca-certificates-mozilla (3.17-3 -> 3.17.1-1)
[2014-09-28 00:03] [PACMAN] upgraded colord (1.2.2-1 -> 1.2.3-1)
[2014-09-28 00:03] [PACMAN] upgraded cups-filters (1.0.58-1 -> 1.0.59-1)
[2014-09-28 00:03] [PACMAN] upgraded e2fsprogs (1.42.11-1 -> 1.42.12-1)
[2014-09-28 00:03] [PACMAN] upgraded p11-kit (0.20.2-1 -> 0.20.7-3)
[2014-09-28 00:03] [PACMAN] upgraded nss (3.17-3 -> 3.17.1-1)
[2014-09-28 00:03] [PACMAN] upgraded firefox (32.0.2-1 -> 32.0.3-1)
[2014-09-28 00:03] [PACMAN] upgraded flac (1.3.0-3 -> 1.3.0-4)
[2014-09-28 00:03] [PACMAN] upgraded gnutls (3.3.8-1 -> 3.3.8-2)
[2014-09-28 00:03] [PACMAN] upgraded gstreamer (1.4.2-1 -> 1.4.3-1)
[2014-09-28 00:03] [PACMAN] upgraded gst-plugins-base-libs (1.4.2-1 -> 1.4.3-1)
[2014-09-28 00:03] [PACMAN] upgraded gst-plugins-bad (1.4.2-1 -> 1.4.3-1)
[2014-09-28 00:03] [PACMAN] upgraded gst-plugins-base (1.4.2-1 -> 1.4.3-1)
[2014-09-28 00:03] [PACMAN] upgraded gst-plugins-good (1.4.2-1 -> 1.4.3-1)
[2014-09-28 00:03] [PACMAN] upgraded less (458-1 -> 468-1)
[2014-09-28 00:03] [PACMAN] upgraded lib32-e2fsprogs (1.42.11-1 -> 1.42.12-1)
[2014-09-28 00:03] [PACMAN] upgraded libcacard (2.1.1-1 -> 2.1.2-1)
[2014-09-28 00:03] [PACMAN] upgraded libreoffice-fresh (4.3.1-1 -> 4.3.2-1)
[2014-09-28 00:03] [PACMAN] upgraded libreoffice-fresh-he (4.3.1-1 -> 4.3.2-1)
[2014-09-28 00:03] [PACMAN] upgraded qtwebkit (2.3.3-2 -> 2.3.4-1)
[2014-09-28 00:03] [ALPM] warning: /etc/sudoers installed as /etc/sudoers.pacnew
[2014-09-28 00:03] [PACMAN] upgraded sudo (1.8.10.p3-1 -> 1.8.11-1)
[2014-09-28 00:06] [PACMAN] Running 'pacman -S obexfs'
[2014-09-28 00:06] [PACMAN] installed obexftp (0.24-3)
[2014-09-28 00:06] [PACMAN] installed obexfs (0.12-4)
[2014-09-28 00:19] [PACMAN] Running 'pacman -S fuse openobexobexftp'
[2014-09-28 00:19] [PACMAN] Running 'pacman -S fuse openobex obexftp'
[2014-09-28 00:19] [PACMAN] reinstalled fuse (2.9.3-2)
[2014-09-28 00:19] [PACMAN] reinstalled openobex (1.7.1-1)
[2014-09-28 00:19] [PACMAN] reinstalled obexftp (0.24-3)
Last edited by andav (2014-09-28 08:37:06)
Similar Messages
-
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
Lenovo W530 - Stuck at "Loading initial ramdisk" GRUB Discrete graphic
As in the thread https://bbs.archlinux.org/viewtopic.php?id=146006 (only that I do not have any encryption on my drive) I cannot get my ThinkPad W530 booting (I have installed via EFI) with Discrete graphics mode (set in BIOS). NVIDIA Optimus works with optirun and Integrated graphics works fine but I cannot start with Discrete graphics.
I want to do this since I cannot connect an external monitor to my computer at all right now (the Mini DisplayPort and VGA adapter are only physically connected to the NVIDIA card). I have tried following several more or less incomplete guides on how to start a second X server with bumblebee but I cannot get those working and do not see two X servers a a good solution. I want a virtual display that spans over two monitors. I tried booting the computer with an Ubuntu Live USB stick and it automatically connected and used both monitors (when I set Discrete graphics in the BIOS) even in the installation process, and I can run games like StarCraft II just fine on my Arch install with optirun (when I set NVIDIA Optimus in the BIOS) so the hardware seems to work just fine.
When I boot the regular Arch linux kernel (3.17.1-1-ARCH) with Discrete graphics I get to the message "Loading initial ramdisk...", then the screen turns black. My system is using GDM for login and Gnome as window manager.
I managed to login blindly (not sure if it was through GDM or Ctrl + Alt + F2 since I tried both) during the black screen and execute a command that I later found in my .zsh_history file and I also can see that the drive access led is blinking a while after the black screen so it seems that the system has not hanged entirely. If I disable GDM the screen does not turn black but freezes at the "Loading initial ramdisk..." output.
My /boot/grub/grub.cfg file is (I am not trying to boot with the linux-ck or linux-rt kernel that I also have installed):
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="4"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt3 --hint-efi=hd0,gpt3 --hint-baremetal=ahci0,gpt3 25086a9b-a542-4018-9f71-4f492f09be91
else
search --no-floppy --fs-uuid --set=root 25086a9b-a542-4018-9f71-4f492f09be91
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=sv_SE
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux-rt ...'
linux /vmlinuz-linux-rt root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux-rt.img
submenu 'Avancerade flaggor för Arch Linux' $menuentry_id_option 'gnulinux-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
menuentry 'Arch Linux, med Linux linux-rt' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-rt-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux-rt ...'
linux /vmlinuz-linux-rt root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux-rt.img
menuentry 'Arch Linux, with Linux linux-rt (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-rt-fallback-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux-rt ...'
linux /vmlinuz-linux-rt root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux-rt-fallback.img
menuentry 'Arch Linux, med Linux linux-ck' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-ck-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux-ck ...'
linux /vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux-ck.img
menuentry 'Arch Linux, with Linux linux-ck (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-ck-fallback-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux-ck ...'
linux /vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux-ck-fallback.img
menuentry 'Arch Linux, med Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux ...'
linux /vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-25086a9b-a542-4018-9f71-4f492f09be91' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod fat
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 B1C0-6D51
else
search --no-floppy --fs-uuid --set=root B1C0-6D51
fi
echo 'Läser in Linux linux ...'
linux /vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
echo 'Läser in initial ramdisk ...'
initrd /intel-ucode.img /initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
Is the error with GRUB, with the kernel, with the NVIDIA drivers or with Xorg? How can I debug and fix this once and for all?
UPDATE:
I have managed to login to the computer when it has reached the black screen via SSH with my phone and got the dmesg output:
[ 0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbc6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc70000-0x00000000cbe71fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbe72000-0x00000000db14efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db14f000-0x00000000db34efff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000db34f000-0x00000000df69efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df69f000-0x00000000df79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df79f000-0x00000000df7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Lenovo
[ 0.000000] efi: ACPI 2.0=0xdf7fe014 ACPI=0xdf7fe000 SMBIOS=0xdf69e000
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000087000) (0MB)
[ 0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000087000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000088000-0x000000000009d000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009d000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001053000) (15MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001053000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f53000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002f53000-0x0000000037834000) (840MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037834000-0x0000000037c12000) (3MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037c12000-0x0000000093e96000) (1474MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000093e96000-0x00000000c9841000) (857MB)
[ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000c9841000-0x00000000c9861000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000c9861000-0x00000000cbc5a000) (35MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000cbc5a000-0x00000000cbc70000) (0MB)
[ 0.000000] efi: mem14: type=0, attr=0xf, range=[0x00000000cbc70000-0x00000000cbe72000) (2MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000cbe72000-0x00000000cc831000) (9MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000cc831000-0x00000000ccce0000) (4MB)
[ 0.000000] efi: mem17: type=1, attr=0xf, range=[0x00000000ccce0000-0x00000000cccfd000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000cccfd000-0x00000000cec6f000) (31MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000cec6f000-0x00000000cec70000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000cec70000-0x00000000cec81000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000cec81000-0x00000000d0974000) (28MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000d0974000-0x00000000d0986000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000d0986000-0x00000000d254f000) (27MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000d254f000-0x00000000dac78000) (135MB)
[ 0.000000] efi: mem25: type=2, attr=0xf, range=[0x00000000dac78000-0x00000000dac82000) (0MB)
[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x00000000dac82000-0x00000000db14f000) (4MB)
[ 0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x00000000db14f000-0x00000000db228000) (0MB)
[ 0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000db228000-0x00000000db34f000) (1MB)
[ 0.000000] efi: mem29: type=6, attr=0x800000000000000f, range=[0x00000000db34f000-0x00000000dbef8000) (11MB)
[ 0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000dbef8000-0x00000000ded9f000) (46MB)
[ 0.000000] efi: mem31: type=0, attr=0xf, range=[0x00000000ded9f000-0x00000000df3f0000) (6MB)
[ 0.000000] efi: mem32: type=0, attr=0xf, range=[0x00000000df3f0000-0x00000000df69b000) (2MB)
[ 0.000000] efi: mem33: type=0, attr=0xf, range=[0x00000000df69b000-0x00000000df69d000) (0MB)
[ 0.000000] efi: mem34: type=0, attr=0xf, range=[0x00000000df69d000-0x00000000df69f000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000df69f000-0x00000000df6f0000) (0MB)
[ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000df6f0000-0x00000000df79f000) (0MB)
[ 0.000000] efi: mem37: type=9, attr=0xf, range=[0x00000000df79f000-0x00000000df7d7000) (0MB)
[ 0.000000] efi: mem38: type=9, attr=0xf, range=[0x00000000df7d7000-0x00000000df7ff000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000df7ff000-0x00000000df800000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e000000) (4576MB)
[ 0.000000] efi: mem41: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem42: type=0, attr=0x0, range=[0x00000000df800000-0x00000000e0000000) (8MB)
[ 0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
[ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 244759G/244759G, BIOS G5ET92WW (2.52 ) 02/27/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FE0000000 write-back
[ 0.000000] 7 base 21E000000 mask FFE000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21de00000-0x21dffffff]
[ 0.000000] [mem 0x21de00000-0x21dffffff] page 2M
[ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ddfffff]
[ 0.000000] [mem 0x21c000000-0x21ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcbc6ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcbbfffff] page 2M
[ 0.000000] [mem 0xcbc00000-0xcbc6ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcbe72000-0xdb14efff]
[ 0.000000] [mem 0xcbe72000-0xcbffffff] page 4k
[ 0.000000] [mem 0xcc000000-0xdaffffff] page 2M
[ 0.000000] [mem 0xdb000000-0xdb14efff] page 4k
[ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
[ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdf7ff000-0xdf7fffff]
[ 0.000000] [mem 0xdf7ff000-0xdf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x37834000-0x37c11fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DF7FE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DF7FE170 0000CC (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000DF7E6000 00010C (v05 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DF7E8000 010A68 (v01 LENOVO TP-G5 00002520 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000DF754000 000040
[ 0.000000] ACPI: SLIC 0x00000000DF7FD000 000176 (v01 LENOVO TP-G5 00002520 PTL 00000001)
[ 0.000000] ACPI: TCPA 0x00000000DF7FC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DF7FB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DF7FA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DF7F9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 0x00000000DF7E4000 000038 (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000DF7E3000 000098 (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DF7E2000 00003C (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: ECDT 0x00000000DF7E1000 000052 (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DF7E0000 000064 (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: ASF! 0x00000000DF7E7000 0000A5 (v32 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DF7DF000 00003E (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DF7DE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: MSDM 0x00000000DF7DD000 000055 (v03 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DF7DC000 000D23 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DF7DB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 0x00000000DF7DA000 000080 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000DF7D9000 0002A6 (v01 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: DBG2 0x00000000DF7D8000 0000E9 (v00 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: BGRT 0x00000000DF7D7000 000038 (v00 LENOVO TP-G5 00002520 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21dffffff]
[ 0.000000] NODE_DATA [mem 0x21dff3000-0x21dff6fff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215600000-ffff88021d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xcbc6ffff]
[ 0.000000] node 0: [mem 0xcbe72000-0xdb14efff]
[ 0.000000] node 0: [mem 0xdf7ff000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x21dffffff]
[ 0.000000] On node 0 totalpages: 2068202
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13950 pages used for memmap
[ 0.000000] DMA32 zone: 892750 pages, LIFO batch:31
[ 0.000000] Normal zone: 18304 pages used for memmap
[ 0.000000] Normal zone: 1171456 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc70000-0xcbe71fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb14f000-0xdb34efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb34f000-0xdf69efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf69f000-0xdf79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf79f000-0xdf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf80f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf80f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021dc00000 s86848 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2035861
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7985704K/8272808K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 287104K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.799 MHz processor
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.41 BogoMIPS (lpj=9312663)
[ 0.000033] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20140724
[ 0.009889] ACPI: All ACPI Tables successfully acquired
[ 0.041073] Security Framework initialized
[ 0.041080] Yama: becoming mindful.
[ 0.041501] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.043224] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.044022] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.044030] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.044222] Initializing cgroup subsys memory
[ 0.044227] Initializing cgroup subsys devices
[ 0.044229] Initializing cgroup subsys freezer
[ 0.044231] Initializing cgroup subsys net_cls
[ 0.044232] Initializing cgroup subsys blkio
[ 0.044251] CPU: Physical Processor ID: 0
[ 0.044251] CPU: Processor Core ID: 0
[ 0.044256] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.044576] mce: CPU supports 9 MCE banks
[ 0.044587] CPU0: Thermal monitoring enabled (TM1)
[ 0.044597] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.044696] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.047190] ftrace: allocating 20674 entries in 81 pages
[ 0.055722] dmar: Host address width 36
[ 0.055724] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.055728] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.055729] dmar: RMRR base: 0x000000debba000 end: 0x000000debd0fff
[ 0.055802] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.055803] HPET id 0 under DRHD base 0xfed90000
[ 0.055804] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.055890] Enabled IRQ remapping in x2apic mode
[ 0.055891] Enabling x2apic
[ 0.055892] Enabled x2apic
[ 0.055900] Switched APIC routing to cluster x2apic.
[ 0.056343] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089389] smpboot: CPU0: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[ 0.089397] TSC deadline timer enabled
[ 0.089416] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.089433] ... version: 3
[ 0.089434] ... bit width: 48
[ 0.089435] ... generic registers: 4
[ 0.089436] ... value mask: 0000ffffffffffff
[ 0.089436] ... max period: 0000ffffffffffff
[ 0.089437] ... fixed-purpose events: 3
[ 0.089438] ... event mask: 000000070000000f
[ 0.109521] x86: Booting SMP configuration:
[ 0.109522] .... node #0, CPUs: #1
[ 0.123229] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.129911] #2
[ 0.140575] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.150115] #3
[ 0.166977] #4
[ 0.177626] CPU4 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.187180] #5
[ 0.207384] #6
[ 0.218032] CPU6 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.227588] #7
[ 0.241051] x86: Booted up 1 node, 8 CPUs
[ 0.241055] smpboot: Total of 8 processors activated (44718.31 BogoMIPS)
[ 0.248684] devtmpfs: initialized
[ 0.250902] PM: Registering ACPI NVS region [mem 0xdf69f000-0xdf79efff] (1048576 bytes)
[ 0.251609] pinctrl core: initialized pinctrl subsystem
[ 0.251647] RTC time: 16:26:11, date: 10/27/14
[ 0.251717] NET: Registered protocol family 16
[ 0.251810] cpuidle: using governor ladder
[ 0.251813] cpuidle: using governor menu
[ 0.251841] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.251843] ACPI: bus type PCI registered
[ 0.251844] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.252033] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.252035] PCI: not using MMCONFIG
[ 0.252036] PCI: Using configuration type 1 for base access
[ 0.265514] ACPI: Added _OSI(Module Device)
[ 0.265515] ACPI: Added _OSI(Processor Device)
[ 0.265516] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.265517] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.266718] ACPI : EC: EC description table is found, configuring boot EC
[ 0.270105] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.309157] ACPI: Dynamic OEM Table Load:
[ 0.309168] ACPI: SSDT 0xFFFF880211C58000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.325525] ACPI: Dynamic OEM Table Load:
[ 0.325534] ACPI: SSDT 0xFFFF880211D29000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.338781] ACPI: Dynamic OEM Table Load:
[ 0.338789] ACPI: SSDT 0xFFFF880211FBC000 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.352988] ACPI: Interpreter enabled
[ 0.352993] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.352997] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.353007] ACPI: (supports S0 S3 S4 S5)
[ 0.353008] ACPI: Using IOAPIC for interrupt routing
[ 0.353019] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.362314] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.362393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.364496] ACPI: Power Resource [PUBS] (on)
[ 0.365000] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.365725] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.367751] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.367805] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.367859] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.367910] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.367961] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.368011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.368064] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.368114] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.368182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.368186] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.368265] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.368301] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.368303] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.368305] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.368306] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.368436] PCI host bridge to bus 0000:00
[ 0.368438] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.368440] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.368441] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.368443] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.368444] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.368445] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.368446] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.368448] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.368449] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.368450] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.368451] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.368452] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.368454] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.368455] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.368456] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.368457] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.368459] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.368460] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.368466] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.368530] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.368561] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.368637] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.368661] pci 0000:00:14.0: reg 0x10: [mem 0xf4220000-0xf422ffff 64bit]
[ 0.368730] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.368759] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.368797] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.368821] pci 0000:00:16.0: reg 0x10: [mem 0xf4235000-0xf423500f 64bit]
[ 0.368896] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.368954] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.368972] pci 0000:00:16.3: reg 0x10: [io 0x5070-0x5077]
[ 0.368981] pci 0000:00:16.3: reg 0x14: [mem 0xf423c000-0xf423cfff]
[ 0.369103] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.369120] pci 0000:00:19.0: reg 0x10: [mem 0xf4200000-0xf421ffff]
[ 0.369127] pci 0000:00:19.0: reg 0x14: [mem 0xf423b000-0xf423bfff]
[ 0.369135] pci 0000:00:19.0: reg 0x18: [io 0x5040-0x505f]
[ 0.369194] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.369219] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.369256] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.369276] pci 0000:00:1a.0: reg 0x10: [mem 0xf423a000-0xf423a3ff]
[ 0.369363] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.369389] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.369426] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.369442] pci 0000:00:1b.0: reg 0x10: [mem 0xf4230000-0xf4233fff 64bit]
[ 0.369514] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.369544] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.369581] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.369718] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.369792] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.369927] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.370005] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.370025] pci 0000:00:1d.0: reg 0x10: [mem 0xf4239000-0xf42393ff]
[ 0.370111] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.370137] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.370171] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.370322] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.370339] pci 0000:00:1f.2: reg 0x10: [io 0x5068-0x506f]
[ 0.370346] pci 0000:00:1f.2: reg 0x14: [io 0x507c-0x507f]
[ 0.370354] pci 0000:00:1f.2: reg 0x18: [io 0x5060-0x5067]
[ 0.370361] pci 0000:00:1f.2: reg 0x1c: [io 0x5078-0x507b]
[ 0.370368] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 0.370376] pci 0000:00:1f.2: reg 0x24: [mem 0xf4238000-0xf42387ff]
[ 0.370419] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.370472] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.370487] pci 0000:00:1f.3: reg 0x10: [mem 0xf4234000-0xf42340ff 64bit]
[ 0.370507] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.370616] pci 0000:01:00.0: [10de:0ffb] type 00 class 0x030000
[ 0.370627] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[ 0.370637] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.370646] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.370653] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.370660] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.370746] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.370756] pci 0000:01:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff]
[ 1.377401] pci 0000:00:01.0: ASPM: Could not configure common clock
[ 1.377430] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.377435] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.377440] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
[ 1.377454] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.377615] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
[ 1.377638] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 1.377665] pci 0000:02:00.0: reg 0x10: [mem 0xf3a00000-0xf3a000ff]
[ 1.377889] pci 0000:02:00.0: supports D1 D2
[ 1.377890] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.384191] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.384195] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.384198] pci 0000:00:1c.0: bridge window [mem 0xf3a00000-0xf41fffff]
[ 1.384207] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff 64bit pref]
[ 1.384435] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
[ 1.384618] pci 0000:03:00.0: reg 0x10: [mem 0xf3900000-0xf3901fff 64bit]
[ 1.385377] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.390878] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.390887] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff]
[ 1.391702] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 1.391749] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 1.391838] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 1.391840] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.391841] vgaarb: loaded
[ 1.391842] vgaarb: bridge control possible 0000:01:00.0
[ 1.391888] PCI: Using ACPI for IRQ routing
[ 1.393360] PCI: pci_cache_line_size set to 64 bytes
[ 1.393563] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.393565] e820: reserve RAM buffer [mem 0xcbc70000-0xcbffffff]
[ 1.393566] e820: reserve RAM buffer [mem 0xdb14f000-0xdbffffff]
[ 1.393567] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 1.393568] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
[ 1.393651] NetLabel: Initializing
[ 1.393652] NetLabel: domain hash size = 128
[ 1.393653] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.393662] NetLabel: unlabeled traffic allowed by default
[ 1.393685] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.393689] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.396725] Switched to clocksource hpet
[ 1.400615] pnp: PnP ACPI init
[ 1.400875] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.400878] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 1.400879] system 00:00: [mem 0x00100000-0xdfffffff] could not be reserved
[ 1.400881] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 1.400883] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 1.400885] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.400948] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 1.400954] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 1.400969] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 1.400971] system 00:01: [io 0x0500-0x057f] has been reserved
[ 1.400972] system 00:01: [io 0x0800-0x080f] has been reserved
[ 1.400974] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 1.400975] system 00:01: [io 0x1600-0x167f] has been reserved
[ 1.400977] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 1.400979] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.400980] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.400982] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.400983] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.400985] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 1.400987] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.401030] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.401057] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 1.401080] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 1.401117] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 1.401508] pnp: PnP ACPI: found 6 devices
[ 1.408246] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.408283] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref]
[ 1.408285] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.408288] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.408290] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
[ 1.408292] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.408295] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.408301] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.408308] pci 0000:00:1c.0: bridge window [mem 0xf3a00000-0xf41fffff]
[ 1.408313] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf38fffff 64bit pref]
[ 1.408320] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 1.408327] pci 0000:00:1c.1: bridge window [mem 0xf3900000-0xf39fffff]
[ 1.408339] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.408340] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.408342] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.408343] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.408344] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.408346] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.408347] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 1.408348] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 1.408349] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 1.408351] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 1.408352] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 1.408353] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 1.408355] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 1.408356] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 1.408357] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 1.408358] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xfebfffff]
[ 1.408360] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff]
[ 1.408361] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.408362] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
[ 1.408364] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.408365] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.408366] pci_bus 0000:02: resource 1 [mem 0xf3a00000-0xf41fffff]
[ 1.408368] pci_bus 0000:02: resource 2 [mem 0xf3100000-0xf38fffff 64bit pref]
[ 1.408369] pci_bus 0000:03: resource 1 [mem 0xf3900000-0xf39fffff]
[ 1.408391] NET: Registered protocol family 2
[ 1.408550] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.408683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.408851] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.408867] TCP: reno registered
[ 1.408875] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.408903] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.408956] NET: Registered protocol family 1
[ 1.409307] pci 0000:01:00.0: Video device with shadowed ROM
[ 1.409390] PCI: CLS 64 bytes, default 64
[ 1.409431] Unpacking initramfs...
[ 1.456654] Freeing initrd memory: 3960K (ffff880037834000 - ffff880037c12000)
[ 1.456675] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.456678] software IO TLB [mem 0xd6c82000-0xdac82000] (64MB) mapped at [ffff8800d6c82000-ffff8800dac81fff]
[ 1.457012] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.457059] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457066] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457072] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457077] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457085] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457092] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457098] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457105] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x1b
[ 1.457147] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.457167] Scanning for low memory corruption every 60 seconds
[ 1.457402] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.457428] Initialise system trusted keyring
[ 1.457761] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.458800] zpool: loaded
[ 1.458802] zbud: loaded
[ 1.458947] VFS: Disk quotas dquot_6.5.2
[ 1.458972] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.459072] msgmni has been set to 15747
[ 1.459118] Key type big_key registered
[ 1.459270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.459324] io scheduler noop registered
[ 1.459326] io scheduler deadline registered
[ 1.459347] io scheduler cfq registered (default)
[ 1.459465] pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
[ 1.459740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.459753] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.459780] efifb: invalid framebuffer address
[ 1.459787] intel_idle: MWAIT substates: 0x21120
[ 1.459788] intel_idle: v0.4 model 0x3A
[ 1.459789] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.460069] GHES: HEST is not enabled!
[ 1.460132] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.480906] 0000:00:16.3: ttyS0 at I/O 0x5070 (irq = 19, base_baud = 115200) is a 16550A
[ 1.481036] Linux agpgart interface v0.103
[ 1.481100] rtc_cmos 00:02: RTC can wake from S4
[ 1.481222] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.481253] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.481261] Intel P-state driver initializing.
[ 1.481419] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.481599] TCP: cubic registered
[ 1.481764] NET: Registered protocol family 10
[ 1.482132] NET: Registered protocol family 17
[ 1.482732] Loading compiled-in X.509 certificates
[ 1.482753] registered taskstats version 1
[ 1.483687] Magic number: 2:127:440
[ 1.483695] clockevents broadcast: hash matches
[ 1.483710] pcieport 0000:00:1c.1: hash matches
[ 1.483810] rtc_cmos 00:02: setting system clock to 2014-10-27 16:26:12 UTC (1414427172)
[ 1.483917] PM: Hibernation image not present or could not be loaded.
[ 1.485343] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 1.485346] Write protecting the kernel read-only data: 8192k
[ 1.488857] Freeing unused kernel memory: 752K (ffff880002544000 - ffff880002600000)
[ 1.490323] Freeing unused kernel memory: 336K (ffff8800027ac000 - ffff880002800000)
[ 1.500877] random: systemd-tmpfile urandom read with 7 bits of entropy available
[ 1.502894] systemd-udevd[79]: starting version 216
[ 1.511492] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.513508] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.513799] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.516752] ACPI: bus type USB registered
[ 1.516776] usbcore: registered new interface driver usbfs
[ 1.516791] usbcore: registered new interface driver hub
[ 1.516980] usbcore: registered new device driver usb
[ 1.517579] sdhci: Secure Digital Host Controller Interface driver
[ 1.517580] sdhci: Copyright(c) Pierre Ossman
[ 1.517794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.517896] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.517906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.518010] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 1.518069] SCSI subsystem initialized
[ 1.518079] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.518158] xhci_hcd 0000:00:14.0: irq 26 for MSI/MSI-X
[ 1.518215] sdhci-pci 0000:02:00.0: No vmmc regulator found
[ 1.518217] sdhci-pci 0000:02:00.0: No vqmmc regulator found
[ 1.518225] ehci-pci: EHCI PCI platform driver
[ 1.518342] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.518499] hub 1-0:1.0: USB hub found
[ 1.518510] hub 1-0:1.0: 4 ports detected
[ 1.518776] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.518778] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.518958] hub 2-0:1.0: USB hub found
[ 1.518969] hub 2-0:1.0: 4 ports detected
[ 1.519036] libata version 3.00 loaded.
[ 1.519376] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.519383] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.519397] ehci-pci 0000:00:1a.0: debug port 2
[ 1.523293] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.523300] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf423a000
[ 1.528153] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.530239] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.530357] hub 3-0:1.0: USB hub found
[ 1.530361] hub 3-0:1.0: 3 ports detected
[ 1.530512] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.530515] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.530528] ehci-pci 0000:00:1d.0: debug port 2
[ 1.534415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.534428] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4239000
[ 1.543624] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.543867] hub 4-0:1.0: USB hub found
[ 1.543871] hub 4-0:1.0: 3 ports detected
[ 1.544002] ahci 0000:00:1f.2: version 3.0
[ 1.544111] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.544153] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.544155] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led clo pio slum part ems apst
[ 1.550818] scsi host0: ahci
[ 1.551275] scsi host1: ahci
[ 1.551751] scsi host2: ahci
[ 1.552085] scsi host3: ahci
[ 1.552361] scsi host4: ahci
[ 1.552561] scsi host5: ahci
[ 1.552602] ata1: SATA max UDMA/133 abar m2048@0xf4238000 port 0xf4238100 irq 27
[ 1.552605] ata2: SATA max UDMA/133 abar m2048@0xf4238000 port 0xf4238180 irq 27
[ 1.552606] ata3: DUMMY
[ 1.552606] ata4: DUMMY
[ 1.552607] ata5: DUMMY
[ 1.552608] ata6: DUMMY
[ 1.837361] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.870771] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.882191] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.882199] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.892187] ata1.00: ATA-9: INTEL SSDSC2BW240A3L, LF1i, max UDMA/133
[ 1.892194] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.902211] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.902220] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.912240] ata1.00: configured for UDMA/133
[ 1.912585] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 LF1i PQ: 0 ANSI: 5
[ 1.924185] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.926015] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.926024] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.927460] ata2.00: ATA-8: WDC WD10JPVT-08A1YT2, 01.01A01, max UDMA/133
[ 1.927467] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.929353] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.929362] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.930787] ata2.00: configured for UDMA/133
[ 1.931112] scsi 1:0:0:0: Direct-Access ATA WDC WD10JPVT-08A 1A01 PQ: 0 ANSI: 5
[ 1.936614] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 1.936637] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.936640] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.936653] sd 0:0:0:0: [sda] Write Protect is off
[ 1.936655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.936664] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.936666] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.936667] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.936684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.937479] sda: sda1 sda2 sda3 sda4
[ 1.937778] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.962137] hub 3-1:1.0: USB hub found
[ 1.962324] hub 3-1:1.0: 6 ports detected
[ 2.065022] sdb: sdb1 sdb2
[ 2.065588] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.067665] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.192302] hub 4-1:1.0: USB hub found
[ 2.192454] hub 4-1:1.0: 8 ports detected
[ 2.261319] usb 3-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.344660] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.458157] tsc: Refined TSC clocksource calibration: 2793.661 MHz
[ 2.461737] usb 4-1.7: new low-speed USB device number 3 using ehci-pci
[ 2.741966] systemd[1]: Cannot add dependency job for unit httpd.service, ignoring: Unit httpd.service failed to load: No such file or directory.
[ 2.741977] systemd[1]: Cannot add dependency job for unit [email protected], ignoring: Unit [email protected] failed to load: No such file or directory.
[ 2.766662] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 2.797195] systemd-udevd[209]: starting version 216
[ 2.994729] pps_core: LinuxPPS API ver. 1 registered
[ 2.994732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.994980] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\_SB_.PCI0.LPC_.PMIO) (20140724/utaddress-258)
[ 2.994985] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.994991] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
[ 2.994994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.994995] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
[ 2.994997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.994998] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
[ 2.995000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.995001] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.995905] PTP clock support registered
[ 2.996690] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.997968] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[ 3.000008] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.000009] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.004652] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.004707] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 3.011387] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 3.011549] ACPI: Lid Switch [LID]
[ 3.011606] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 3.011610] ACPI: Sleep Button [SLPB]
[ 3.011685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.011688] ACPI: Power Button [PWRF]
[ 3.011823] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 3.033484] acpi device:0a: registered as cooling_device8
[ 3.033554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5
[ 3.037383] Non-volatile memory driver v1.3
[ 3.042174] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 3.042375] wmi: Mapper loaded
[ 3.042586] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 3.042588] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.042590] thinkpad_acpi: ThinkPad BIOS G5ET92WW (2.52 ), EC unknown
[ 3.042591] thinkpad_acpi: Lenovo ThinkPad W530, model 244759G
[ 3.043058] cfg80211: Calling CRDA to update world regulatory domain
[ 3.043279] thinkpad_acpi: Unsupported brightness interface, please contact [email protected]
[ 3.044385] thinkpad_acpi: radio switch found; radios are enabled
[ 3.044398] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.044399] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.045054] ACPI: Battery Slot [BAT0] (battery present)
[ 3.046083] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.046085] ACPI: Thermal Zone [THM0] (48 C)
[ 3.046124] ACPI: AC Adapter [AC] (on-line)
[ 3.046223] random: nonblocking pool is initialized
[ 3.047273] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.050109] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 3.056235] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
[ 3.056771] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 3.056772] Copyright(c) 2003- 2014 Intel Corporation
[ 3.056924] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.057166] iwlwifi 0000:03:00.0: irq 30 for MSI/MSI-X
[ 3.058976] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 3.058992] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 3.059556] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 3.062216] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 3.065041] AVX version of gcm_enc/dec engaged.
[ 3.073560] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k SSFS
[ 3.102267] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
[ 3.105383] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 3.105387] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 3.105388] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 3.105390] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 3.105491] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 3.116970] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 3.119500] media: Linux media interface: v0.10
[ 3.123002] Linux video capture interface: v2.00
[ 3.126296] iTCO_vendor_support: vendor-support=0
[ 3.127001] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.127038] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.127120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.152895] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.157388] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2eb)
[ 3.161446] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input9
[ 3.161525] usbcore: registered new interface driver uvcvideo
[ 3.161527] USB Video Class driver (1.1.1)
[ 3.163015] intel_rapl: Found RAPL domain package
[ 3.163018] intel_rapl: Found RAPL domain core
[ 3.174342] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 3.180951] systemd-journald[183]: Received request to flush runtime journal from PID 1
[ 3.195849] systemd-udevd[212]: renamed network interface wlan0 to wlp3s0
[ 3.196309] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.207108] usbcore: registered new interface driver usbhid
[ 3.207115] usbhid: USB HID core driver
[ 3.234434] hid-generic 0003:0765:5010.0001: hiddev0,hidraw0: USB HID v1.11 Device [HID 0765:5010] on usb-0000:00:1d.0-1.7/input0
[ 3.279807] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 3.279810] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:96:b3:ae
[ 3.279811According to the wiki adding rcutree.rcu_idle_gp_delay=1 as a kernel parameter should mitigate this: "NVRM: GPU at 0000:01:00.0 has fallen off the bus."
https://wiki.archlinux.org/index.php/NV … iled.21.29
Adding nolapic stops my monitors from going black, but then I only have one cpu core, and probably other problems... -
Loading Initial ramdisk freeze?
Ok so i have arch installed and am loving it. just got kde up and running however just started noticing when rebooting will sometimes hang on loading initial ramdisk ? i tried maaking a new ramdisk still expieriencing the issue. any one else ? i have no idea where to start here. sometime it takes 5 or 6 restarts before it will boot.
Thanks
PaulOk so i have arch installed and am loving it. just got kde up and running however just started noticing when rebooting will sometimes hang on loading initial ramdisk ? i tried maaking a new ramdisk still expieriencing the issue. any one else ? i have no idea where to start here. sometime it takes 5 or 6 restarts before it will boot.
Thanks
Paul -
"loading initial ramdisk" hang....
FYI, an Arch installation that's been working well for 2 year is now freezing on "loading initial ramdisk" on boot.
Still looking into it. Not seeing any other recent reports. If anyone has any quick ideas, it would be appreciated. Need to get the computer running ASAP....
It's an Ivy Bridge i7 with UEFI booting. Nothing is particularly special about it. No added video card or storage or anything.well that is weird. When I boot with an Arch ISO on a USB stick - but not even boot the USB, just boot as normal, it works. Take the USB stick out, reboot, and the problem returns.
Well disaster averted for now, so I can continue working on my presentation, but hopefully more clues will come about.... -
Stuck on "Loading initial ramdisk"
From time to time I was encountering problem with my laptop/installation - occasionally Arch stopped booting just after printing "Loading initial ramdisk". Recently after installing new disk drive (SSD one) the problem appears often. I have totally no idea how to handle it. My old disk was Westen Digital WD3200BEVT and new one is Samsung 850 PRO. And like I said I have impression that with new drive I can't boot my machine more often than before.
cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck keymap consolefont"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
I used mkinitcpio -p linux as far as I remember....
I think that connectors should be just fine. Otherwise grub wouldn't load at all, right? -
System freeze when loading initial ramdisk ...
I have this os installed about 2 years and this problem occurs sometimes in last 5 months, the problem is when power on and step into "Loading Initial Ramdisk ..." it will stuck there, no keytap works, have to push the Power button, when power is off, push the Power button again, the system will launch smoothly. The system is up-to-date.
I googled and searched, some people talk about the Video Card like ATI or Nvidia, but what I have is an embeded Intel video card, it's a Thinkpad Sl510 laptop, nothing new.
Also some people refers to the GRUB.
Please let me know what information you need in order to help.
Thanks.Head_on_a_Stick wrote:Have you modified your /etc/mkinitcpio.conf?
No, never.
It could be your drive failing, try a `smartctl` test on it.
Hereby the results: Overall Health Self-Assessment Test: PASSED
So no problem with my drive. -
Adobe After Effects CS6 not loading ExporterQuickTimeHost.pr and ImporterQuickTimeHost.pr
Hi,
Adobe After Effects CS6 not loading ExporterQuickTimeHost.pr and ImporterQuickTimeHost.pr.
We have tried disabling the windows firewall and turning off our Antivirus but it makes no difference.
The program launches with the quicktime plug-inns perfectly when ran as local administrator but will not work as any other user.
Other users do not have local admin rights, only write access to their profile path and the C:/temp folder.
Any help and assitance would be appreciated.
Is there a directory that the users need access to on the C drive?
Many Thanks
BotchHi,
I have updated to 11.0.4 and the issue still persists.
Could someone please advise.
Much appreciated
Botch -
After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.
I see that you ave changed some network.http prefs.<br />
Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page.<br />
network.http.max-connections 48<br />
network.http.max-connections-per-server 16<br />
network.http.max-persistent-connections-per-proxy 16<br />
network.http.max-persistent-connections-per-server 8<br />
network.http.pipelining true<br />
network.http.pipelining.firstrequest true<br />
network.http.pipelining.maxrequests 8<br />
network.http.proxy.pipelining true<br />
network.http.request.max-start-delay 0<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.
it seems to work when you reset the port
try this only after you've made sure that any antiviral/firewall software isnt blocking iTunes and the internet connection settings are fine
1. go to windows, accessories and right click on command prompt and run as administrator
2. type in netsh winsock reset (i know sounds ridiculous but it works type WITH SPACES) and press enter
3. Message saying "winsock reset successful now reboot your computer"
4. restart your computer, and open iTunes..backup should run much smoother and faster
5.Click on iTunes store might be working now -
After upgrade to iphone OS 4.0 (and then 4.1) correct sync stop working
After upgrade to iphone OS 4.0 (and then 4.1) synchronization of calendar, contacts, bookmarks of safari STOP working. For example I check checkbox "synchronize calendar" and press "apply". Then iTunes DELETE check in the checkbox ("synchronize calendar") and start synchronization of all other info but not calendar. The same situation with contacts, bookmarks, Mail.
How is this problem resolved? Thanks in advance.It's OK--no worries! Mail accounts sync differently (I'm a MobileMe user) so knowing the mail account type is important.
First, repair your permissions. You can do this by opening the Disk Utility (Applications to Utilities to Disk Utility), selecting your hard drive and then clicking "Repair Permissions."
Than, rest the iPhone by holding down the "Home" and "Power" buttons through the home screen until the apple appears. Then let it come back to your home screen.
OK, second, I looked up the iOS 4 Manual. Double check your phone settings. Under the "Setting" button, select "Mail, Contacts and Calendars." Select the accounts on your phone and make sure the syncing for the items you want to sync is turned on.
I know you've done this, but try it step by step in case something was left out:
From the manual . . .
Set up iTunes syncing:
1 Connect iPhone to your computer, and open iTunes.
2 In iTunes, select iPhone in the sidebar.
3 Configure the sync settings in each of the settings panes.
See the following section for descriptions of the panes.
4 Click Apply in the lower-right corner of the screen.
By default, “Open iTunes when this iPhone is connected” is selected.
iPhone Settings Panes in iTunes
The following sections provide an overview of each of the iPhone settings panes.
For more information, open iTunes and choose Help > iTunes Help.
Summary Pane
Select “Open iTunes when this iPhone is connected” to have iTunes open and sync iPhone automatically whenever you connect it to your computer. Deselect this option if you want to sync only by clicking the Sync button in iTunes. For more information, see “Automatic iTunes Syncing” on page 58.
Select “Sync only checked songs and videos” if you want iTunes to skip unchecked items in your iTunes library when syncing.
Select “Prefer standard definition videos” if you want iTunes to sync standard definition instead of high definition videos (iPhone 4 only).
Info Pane
The Info pane lets you configure the sync settings for your contacts, calendars, email accounts, and web browser.
Contacts
Sync contacts with applications such as Mac OS X Address Book, Yahoo! Address Book, and Google Contacts on a Mac, or with Yahoo! Address Book, Google Contacts, Windows Address Book (Outlook Express), Windows Contacts (Vista and Windows 7), or Microsoft Outlook 2003, 2007, or 2010 on a PC. (On a Mac, you can sync contacts with multiple applications. On a PC, you can sync contacts with one application at a time.)
If you sync with Yahoo! Address Book, you only need to click Configure to enter your new login information when you change your Yahoo! ID or password after you’ve set up syncing.
Calendars
Sync calendars from applications such as iCal on a Mac, or from Microsoft Outlook 2003, 2007, or 2010 on a PC. (On a Mac, you can sync calendars with multiple applications. On a PC, you can sync calendars with only one application at a time.)
Mail Accounts
Sync email account settings from Mail on a Mac, and from Microsoft Outlook 2003, 2007, or 2010 or Outlook Express on a PC. Account settings are transferred only from your computer to iPhone. Changes you make to an email account on iPhone don’t affect the account on your computer.
Note: The password for your Yahoo! email account isn’t saved on your computer, so it can’t be synced and must be entered on iPhone. In Settings, choose “Mail, Contacts, Calendars,” tap your Yahoo! account, and enter the password.
Web Browser
You can sync bookmarks on iPhone with Safari on a Mac, or with Safari or Microsoft Internet Explorer on a PC.
Notes
Sync notes in the Notes application on iPhone with notes in Mail on a Mac or with Microsoft Outlook 2003, 2007, or 2010 on a PC.
Advanced
These options let you replace the information on iPhone with the information on your computer during the next sync.
When you plugged the iPhone into the new macbook (figuring you had the iPhone first and then got the macbook), you should have received a message saying that your iPhone was currently syncing to another itunes library and do you want to sync it to this one. Did you get that message and did you click "yes?"
Hang in there, you'll get it. My two gmail accounts are syncing OK. I don't use google calendar or sync contacts to those accounts.
Sharon -
Help
When im logged in on my phone and try to purchase any app, it does the loading spinning circle and then stops. And i can't download anything. Why is this?Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, check restrictions. Settings > General > Restrictions -
I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.
we have a same problem
-
after backup, TM cannot eject itself automatically, and then both my mac and TM get high temperature. why is that, I had the same problem twice. I re-start my mac, it doesn't work at tall, still the same problem.
Are you saying, right now that the TM refuses to work even after a re-boot?
Is the light solid green at least? -
hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)
How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB? USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad.
Maybe you are looking for
-
Determining service level offer for delivery date based on customer/materi
Hi, we operate R/3 4.7 enterprise and are looking at a new requirement to present a service level offer at time of sales order input va01, drvin by customer number or group and the material number... For example customer 123456 orders two materials,
-
How to delete unused audio files in a project?
Hi guys, The question is fairly simple: How to delete unused audio files in a project? I can't manage to find the answer in the manual,... all I could find is how to delete audio outside used regions! But in the projects I use, I have loads of outtak
-
Udf in Banks - validate accountnumber
Hello, In the Netherlands almost every accountnumber can be validate with a check digit formula. Some banks use this check digit formula and some banks don't. I would like add an udf in banks with a checkbox. When someone add a new accountnumber on t
-
MX7 SQL Server 2005 datasoucre error
Webserver is Windows 2003 RC2, MX7.02 SQL Server is Windows 2003 RC2, SQL Server 2005 (9.0.1399) CF and SQL are on seperate machines [edit: the fix] OK, gotta love those netops guys. So we were narrowing it down to server -> server communication issu
-
What version of LiveCycle ES4 SP1 is correct?
Hello, I have a little question / doubt about what correct LiveCycle ES4 version I'm using. I have installed LiveCycle ES4 and then Service Pack 1 a while ago with no problem. I recently came this doubt. In the Service Pack "Installation Instruction"