[SOLVED] After Systemd update...2 problems!

Yesterday I update my system and switch to the pure systemd as of arch linux wiki.
Everything is working well, boot time is lightning fast, every programs are working except for Amarok and Vlc.
When I click on the start menu (I'm using KDE) -> then multimedia and Amarok or Vlc, the icon bounce without opening the program's window.
I must kill the Amarok and/or Vlc process in the monitor.
Running in console show absolutely nothing for Vlc.
Running Amarok in sudo in console output:
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
unnamed app(774): KUniqueApplication: Cannot find the D-Bus session server: "/usr/bin/dbus-launch terminated abnormally with the following error: No protocol specified
Autolaunch error: X11 initialization failed
All my daemon of before systemd are active and systemd setting are ok too.
Does anyone have the same behavior or can point me to a possible solution?
Thanks,
Last edited by Chuck Arch Linux (2014-12-08 00:43:33)

jasonwryan wrote:
ngoonee wrote:I'm deleting your other thread, no cross-posting allowed (please read the rest of the Forum Etiquette as well).
And less than half an hour after being warned for it: https://bbs.archlinux.org/viewtopic.php … 4#p1163234
Do it again and you will be banned.
Sorry, by the way, can you help me?
Thanks
edit
Time solved this issue....
Last edited by Chuck Arch Linux (2014-12-08 00:44:38)

Similar Messages

[SOLVED] Problems with systemd-update-utmp after systemd update

Hi all,
I noticed that systemd-update-utmp-runlevel.service has been failing since the last systemd update. My systemd is:
Repository : core
Name : systemd
Version : 184-2
$ systemctl status systemd-update-utmp-runlevel.service
systemd-update-utmp-runlevel.service - Update UTMP about System Runlevel Changes
Loaded: loaded (/usr/lib/systemd/system/systemd-update-utmp-runlevel.service; static)
Active: failed (Result: exit-code) since Sat, 02 Jun 2012 13:55:40 +0200; 56min ago
Docs: man:utmp(5)
Main PID: 395 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-update-utmp-runlevel.service
The exact cause of error is:
Jun 02 13:55:40 arch systemd-update-utmp[395]: Failed to write utmp record: No such file or directory
Jun 02 13:55:40 arch systemd[1]: systemd-update-utmp-runlevel.service: main process exited, code=exited, status=1
What's more, after this update I am not able to mount vmware hgfs shares. I've got following entry in my /etc/fstab (from arch's wiki)
#enable shared folders
.host:/ /mnt/hgfs vmhgfs defaults,ttl=5 0 0
It worked just fine. After the update system boots into maintenance mode with the following message found in sysemd-journal:
arch mount[143]: Directory in share name must not be empty
arch mount[143]: Error: share name is invalid, aborting mount
After commenting hgfs mount entry out the system boots normally.
Thanks in advance.
EDIT:
Mounting hgfs shares manually works as expected
$: sudo mount /mnt/hgfs
Could not add entry to mtab, continuing
mtab:
.host:/ /mnt/hgfs vmhgfs rw,relatime 0 0
so this issue must be systemd related
Last edited by mrzeznicki (2012-06-07 15:18:05)

falconindy wrote:Still can't reproduce this. libmount's parser does just fine with ".host" as a dummy entry in my /etc/hosts file mapped for an NFS share.
Yep, libmount is probably not a problem, I guess this error comes from vmware's hgfsmounter
static Bool
ParseShareName(const char *shareName, // IN: Share name to validate
const char **shareNameHost, // OUT: Share name, host component
const char **shareNameDir) // OUT: Share name, dir component
const char *colon, *dir;
/* 1) Must be colon separated into host and dir. */
colon = strchr(shareName, ':');
if (colon == NULL) {
printf("Share name must be in host:dir format\n");
return FALSE;
/* 2) Dir must not be empty. */
dir = colon + 1;
if (*dir == '\0') {
printf("Directory in share name must not be empty\n");
return FALSE;
/* 3) Dir must start with forward slash. */
if (*dir != '/') {
printf("Directory in share name must be an absolute path\n");
return FALSE;
/* 4) Host must be ".host". */
if (strncmp(shareName, ".host:", 6) != 0) {
printf("Host in share name must be \".host\"\n");
return FALSE;
*shareNameHost = ".host";
LOG("Host component of share name is \"%s\"\n", *shareNameHost);
*shareNameDir = dir;
LOG("Directory component of share name is \"%s\"\n", *shareNameDir);
return TRUE;
I am just wondering why it worked before (and why manual mount works). Is there anything in systemd mount layer that consumes '/'?

Apple TV after recent update has problems with Hulu Fall 2014 shows

In specific, ONCE Season 4 from ABC. The shows play about 15-17 minutes, up to the 2nd commercial - which fails almost immediately, the screen goes black and nothing. (I did find that the SUBTITLES come through - of all things.) If you try and re-start the episode with RESUME PLAYING, you'll just stare at a blank screen for ever.
I have notified HULU of this issue with their content - other shows (like Agents of Shield) play fine, just not ONCE Season 4.
Obviously, something is broken and needs to be fixed.
**** Update **** The problem seems to be caused by the subtitles. Turning the sub-Titles off seems to work-around the problem.

i dont have an ipad but ive had problems also, streaming music from my itunes off my macbook to my appleTV so i after seeing all these itunes 11 problems, im starting to think its the new itunes cuz my airplay was working fine until i updated also.

After 18181 update - wireless problems

After I applied the 18181 update today, airport will connect to my router but will stop responding after about 10 minutes....reselect another router (there are several in my neighborhood) then it will again work for about 10 minutes until it stops. It will remain connected and appear to have no problem when running diagnostics, it just stops working on either Safari, Firefox, or Mail. It appears to be related to this update since the problems began immediately after the update was applied.

Hi,
I really like the changes done in the forum.
I also appreciate the efforts take by the SDN team to keep it up and reduce the downtimes.
But there are problems with this one as goes with any other thing.
As mention above,
I can stay with first one...
But the response time is really something to look forward. I can make a cup of coffeee after clicking on an event...
Kindly, do something for the same.
Regards,
Amit
Today response time is good...
Edited by: Amit Khare on Dec 18, 2007 10:07 AM

[PROBLEM SOLVED] After last update, Can't use keyboard in Xorg

Apparently the last system upgrade installed "xf86-input-keyboard-1.3.2-1-i686" but I reverted back to "xf86-input-keyboard-1.3.1-1-i686" and everything is working again.
Lesson learned: put all xorg related packages to hold because my geforce2 mx440 won't need updates.
This is just frustrating. After doing a system upgrade (which upgraded xorg to version 1.5) I can't use the keyboard anymore. In fact, my screen would freeze also, as long as I was using the latest Xorg version. This machine's card is a geforce2 mx440.
So I downgraded xorg-server with pacman -Rd xorg-server and pacman -U /var/cache/pacman/pkg/xorg-server-yadayada1.4yadayada; Fine, I can use the mouse and open X just as normal as before. BUT the keyboard seems helpless.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Jan 22 19:53:46 PST 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Tue Mar 4 20:24:34 UTC 200 8
#150708
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768_85 +0+0; 1280x1024 +0+0; 1152x 864_75 +0+0; 800x600_100 +0+0; 640x480_100 +0+0"
Option "DisableGLXRootClipping" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
#Virtual 1280 1024
Virtual 1024 768
Depth 24
Modes "1024x768@85" "1152x864@75" "1280x1024@60" " 800x600@100" "640x480@100"
EndSubSection
Defaultdepth 24
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "1024x768@85"
#Modes "640x480@60"
EndSubSection
Option "AddARGBGLXVisuals" "True"
#Option "AllowGLXWithComposite" "True"
Defaultdepth 24
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Vendorname "NVIDIA Corporation"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Vendorname "NVIDIA"
Boardname "NVIDIA GeForce2 Integrated (generic)"
Busid "PCI:1:0:0"
Screen 0
Option "RenderAccel" "true"
EndSection
Section "Device"
Identifier "device1"
Driver "nvidia"
Vendorname "NVIDIA"
Boardname "NVIDIA GeForce2 Integrated (generic)"
Busid "PCI:1:0:0"
Screen 1
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd" #"keyboard"
Option "XkbLayout" "br"
Option "XkbModel" "abnt2"
EndSection
Section "ServerLayout"
Identifier "Layout0"
screen 0 "Screen0" 0 0
Inputdevice "Keyboard0" "CoreKeyboard"
Inputdevice "Mouse0" "CorePointer"
EndSection
Section "Module"
Load "extmod"
# Load "type1"
Load "freetype"
Load "GLX"
# Load "v4l"
EndSection
Section "Monitor"
Identifier "Monitor0"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 753DF(X)/703DF(X)/783DF(X)/CD173A(T) "
Horizsync 30.0 - 71.0
Vertrefresh 50.0 - 160.0
Gamma 1
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsyn c
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsyn c
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
EndSection
Section "Monitor"
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
Gamma 1
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
#modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "NoPM" "True"
EndSection
#Section "Files"
# Rgbpath "/usr/X11R6/lib/X11/rgb"
# EndSection
pacman -Q |grep -ir "xorg"
xorg-apps 1.0.3-3
xorg-font-utils 1.0.3-3
xorg-fonts-100dpi 1.0.1-1
xorg-fonts-75dpi 1.0.1-2
xorg-fonts-alias 1.0.1-1
xorg-fonts-encodings 1.0.2-2
xorg-fonts-misc 1.0.0-3
xorg-res-utils 1.0.3-2
xorg-server 1.4.2-1
xorg-server-utils 7.3-1
xorg-twm 1.0.4-2
xorg-utils 7.3-1
xorg-xauth 1.0.3-1
xorg-xinit 1.1.1-1
xorg-xkb-utils 7.3-1
Xorg.0.log:
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1024x768_85+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(EE) No Input driver matching `kbd'
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
What in hell means the (EE) No Input driver matching `kbd'? I have no idea what happened because no configs were changed whatsoever.
Last edited by joqueza (2009-02-26 01:39:27)

joqueza wrote:This is just frustrating. After doing a system upgrade (which upgraded xorg to version 1.5) I can't use the keyboard anymore. In fact, my screen would freeze also, as long as I was using the latest Xorg version. This machine's card is a geforce2 mx440..
Perhaps you can find some help here http://wiki.archlinux.org/index.php/Xor … otplugging (or in one of the many threads about xorg 1.5 breaking input devices)
No Idea about your problem after downgrading (expect just as a guess, there is some problem with xbinkeys when it is autostarted with the window manager -- http://bbs.archlinux.org/viewtopic.php?id=65468).

[SOLVED] Network bridge fails to start after systemd update

Hello,
After rebooting with the upgraded systemd (208-11 -> 210-2) by bridge could not start.
journal
Mar 06 00:08:45 myhost systemd[1]: Job sys-subsystem-net-devices-enp2s0.device/start timed out.
Mar 06 00:08:45 myhost systemd[1]: Timed out waiting for device sys-subsystem-net-devices-enp2s0.device.
Mar 06 00:08:45 myhost systemd[1]: Dependency failed for My network bridge with DHCP.
Mar 06 00:08:45 myhost systemd[1]: Starting Network.
Mar 06 00:08:45 myhost systemd[1]: Reached target Network.
# cat /etc/systemd/system/[email protected]
.include /usr/lib/systemd/system/[email protected]
[Unit]
Description=My network bridge with DHCP
BindsTo=sys-subsystem-net-devices-enp2s0.device
After=sys-subsystem-net-devices-enp2s0.device
# cat /etc/netctl/br0
Description="My network bridge with DHCP"
Interface=br0
Connection=bridge
BindsToInterfaces=(enp2s0)
IP=dhcp
Commenting out BindsTo and After in the unit file allows to start the service, but it would still throw an error
Mar 06 00:14:05 myhost systemd[1]: Starting My network bridge with DHCP...
Mar 06 00:14:05 myhost network[732]: Starting network profile 'br0'...
Mar 06 00:14:05 myhost kernel: Bridge firewalling registered
Mar 06 00:14:05 myhost systemd-udevd[739]: Could not apply link config to br0
I never renamed interfaces, it was always the system-assigned enp2s0.
What could have become wrong?
Last edited by aya (2014-03-11 14:31:31)

aya wrote:I do use a custom kernel and I did not have CONFIG_FHANDLE enabled. I wish it was posted as an announcement or something.
From the 210 release announcement:
systemd 210 announcement wrote:
Heya,
And here's the next release 210:
http://www.freedesktop.org/software/sys … 210.tar.xz
<snip>
Oh, and one reminder that kinda got lost when we announced 209: you have
to enable CONFIG_FHANDLE in your kernel to use systemd >= 209
successfully, otherwise udev won't find any devices.
<snip>

[SOLVED] After pacman update, system no longer boots

Updated pacman packages, and half-way through the upgrade proces fails (it mentions not being able to find package-control). Upon investigating, I notice no programs are working. I ls /usr/bin and it is empty! In a panic, I restart the machine, and it no longer boots up.
My boot is on sda3 and /root is sda5.
When bash starts up, it loads the kernel fine, and then after a second it panics and exclaims: "No init found. Try passing init=bootarg".
I load up my trusty Arch livecd and fsck the partitions. Fsck claims both partitions are clean. I am able to mount them and examine the file structure: all files look like they are there. I then try to chroot the mounted partition (sda5, my /root), and get the error that "/bin/bash" is not found, even though it is there in the correct directory. Not sure what to do now.
My grub entry, which has always worked fine prior to this:
legacy_kernel '/linux344-ck' 'acpi_osi=Linux' 'root=/dev/sda5' 'rootfstype=ext4' 'init=/sbin/init' 'pcie_aspm=force' 'acpi_backlight=vendor' 'i915.i915_enable_rc6=1' 'i915.i915_enable_fbc=1' 'i915.lvds_downclock=1' 'ipv6.disable=1' 'i915.semaphores=1' 'modprobe.blacklist=bluetooth,uvcvideo' 'ro'
legacy_initrd '/initramfs-linux-fallback.img' '/initramfs-linux-fallback.img'
UPDATE: solved issue. I didn't read the news. Upgrading via pacman broke my system because of this. Now I know! System is running smooth again.
Last edited by corruptz0r (2012-07-15 20:26:53)

Huh. I guess the problem was a couple of stale and crusty {,f}getty .service files, and an obsolete slim.service file I created a while back.
Removing them fixed my problem, although tty1 still shows boot messages (not a problem, and may not even be "new" behaviour)
Cheers Tomegun.

[SOLVED] After latest update: Gnome icons broken

Hi,
I just did a full system update
[2013-03-29 10:29] Running 'pacman -Syu'
[2013-03-29 10:29] synchronizing package lists
[2013-03-29 10:29] starting full system upgrade
[2013-03-29 10:40] upgraded libdrm (2.4.42-1 -> 2.4.43-1)
[2013-03-29 10:40] upgraded libffi (3.0.12-1 -> 3.0.13-1)
[2013-03-29 10:40] upgraded wayland (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] upgraded libgcrypt (1.5.0-3 -> 1.5.1-1)
[2013-03-29 10:40] upgraded systemd (198-1 -> 198-2)
[2013-03-29 10:40] upgraded mesa (9.1-3 -> 9.1.1-1)
[2013-03-29 10:40] upgraded mesa-libgl (9.1-3 -> 9.1.1-1)
[2013-03-29 10:40] upgraded ati-dri (9.1-3 -> 9.1.1-1)
[2013-03-29 10:40] upgraded icu (50.1.2-1 -> 51.1-1)
[2013-03-29 10:40] upgraded boost-libs (1.52.0-1 -> 1.52.0-3)
[2013-03-29 10:40] upgraded gstreamer (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] upgraded gst-plugins-base-libs (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
[2013-03-29 10:40] upgraded gdk-pixbuf2 (2.26.5-1 -> 2.26.5-2)
[2013-03-29 10:40] upgraded gst-plugins-good (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] upgraded sqlite (3.7.15.2-1 -> 3.7.16-1)
[2013-03-29 10:40] upgraded libtracker-sparql (0.14.4-3 -> 0.14.5-1)
[2013-03-29 10:40] upgraded brasero (3.6.1-1 -> 3.6.1-2)
[2013-03-29 10:40] installed libwebp (0.2.1-1)
[2013-03-29 10:40] installed python (3.3.0-3)
[2013-03-29 10:40] installed python-xdg (0.25-1)
[2013-03-29 10:40] installed dotconf (1.3-3)
[2013-03-29 10:40] installed speech-dispatcher (0.8-1)
[2013-03-29 10:40] upgraded chromium (25.0.1364.172-1 -> 26.0.1410.43-2)
[2013-03-29 10:40] upgraded polkit (0.109-1 -> 0.110-1)
[2013-03-29 10:40] warning: /etc/colord.conf installed as /etc/colord.conf.pacnew
[2013-03-29 10:40] upgraded colord (0.1.30-1 -> 0.1.31-1)
[2013-03-29 10:40] upgraded colord-gtk (0.1.24-1 -> 0.1.25-1)
[2013-03-29 10:40] upgraded dhclient (4.2.4.2-1 -> 4.2.5-1)
[2013-03-29 10:40] upgraded diffutils (3.2-1 -> 3.3-1)
[2013-03-29 10:40] upgraded dnssec-anchors (20120422-1 -> 20130320-1)
[2013-03-29 10:40] upgraded file (5.13-1 -> 5.14-1)
[2013-03-29 10:40] upgraded gegl (0.2.0-5 -> 0.2.0-6)
[2013-03-29 10:40] upgraded geoclue (0.12.0-5 -> 0.12.99-1)
[2013-03-29 10:40] upgraded gnome-common (3.6.0-1 -> 3.7.4-1)
[2013-03-29 10:40] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2013-03-29 10:40] Updating TeX tree...
[2013-03-29 10:40] mktexlsr: Updating /etc/texmf/ls-R...
[2013-03-29 10:40] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-03-29 10:40] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-03-29 10:40] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-03-29 10:40] mktexlsr: Done.
[2013-03-29 10:40] upgraded gnuplot (4.6.1-2 -> 4.6.2-2)
[2013-03-29 10:40] upgraded gnutls (3.1.9-1 -> 3.1.10-1)
[2013-03-29 10:40] Warning: Could not load "/usr/lib/graphviz/libgvplugin_rsvg.so.6" - file not found
[2013-03-29 10:40] Warning: Could not load "/usr/lib/graphviz/libgvplugin_pango.so.6" - file not found
[2013-03-29 10:40] Warning: Could not load "/usr/lib/graphviz/libgvplugin_gs.so.6" - file not found
[2013-03-29 10:40] /tmp/alpm_SSGROj/.INSTALL: line 1: 2567 Segmentation fault (core dumped) usr/bin/dot -c
[2013-03-29 10:40] upgraded graphviz (2.30.1-1 -> 2.30.1-2)
[2013-03-29 10:40] upgraded gst-libav (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] upgraded gst-plugins-bad (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] upgraded gst-plugins-base (1.0.5-1 -> 1.0.6-1)
[2013-03-29 10:40] upgraded gst-plugins-ugly (1.0.5-2 -> 1.0.6-1)
[2013-03-29 10:40] upgraded harfbuzz (0.9.9-3 -> 0.9.14-1)
[2013-03-29 10:40] upgraded hwloc (1.6.1-1 -> 1.6.2-1)
[2013-03-29 10:40] upgraded imagemagick (6.8.2.3-1 -> 6.8.4.0-1)
[2013-03-29 10:40] upgraded lib32-libdrm (2.4.42-1 -> 2.4.43-1)
[2013-03-29 10:40] upgraded lib32-mesa (9.1-2 -> 9.1.1-1)
[2013-03-29 10:40] upgraded lib32-mesa-libgl (9.1-2 -> 9.1.1-1)
[2013-03-29 10:40] upgraded lib32-ati-dri (9.1-2 -> 9.1.1-1)
[2013-03-29 10:40] upgraded lib32-libffi (3.0.11-1 -> 3.0.13-1)
[2013-03-29 10:40] upgraded lib32-libgcrypt (1.5.0-1 -> 1.5.1-1)
[2013-03-29 10:40] upgraded libxi (1.6.2-1 -> 1.7-1)
[2013-03-29 10:40] upgraded lib32-libxi (1.6.2-1 -> 1.7-1)
[2013-03-29 10:40] upgraded lib32-sqlite (3.7.15.2-1 -> 3.7.16-1)
[2013-03-29 10:40] upgraded libcups (1.6.1-6 -> 1.6.2-1)
[2013-03-29 10:40] upgraded libgexiv2 (0.5.0-2 -> 0.6.1-1)
[2013-03-29 10:40] upgraded libsasl (2.1.23-9 -> 2.1.23-10)
[2013-03-29 10:40] upgraded libwacom (0.6-1 -> 0.7-1)
[2013-03-29 10:40] >>> Updating module dependencies. Please wait ...
[2013-03-29 10:40] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-03-29 10:40] ==> Building image from preset: 'default'
[2013-03-29 10:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-03-29 10:40] ==> Starting build: 3.8.4-1-ARCH
[2013-03-29 10:40] -> Running build hook: [base]
[2013-03-29 10:40] -> Running build hook: [udev]
[2013-03-29 10:40] -> Running build hook: [autodetect]
[2013-03-29 10:40] -> Running build hook: [modconf]
[2013-03-29 10:40] -> Running build hook: [block]
[2013-03-29 10:41] -> Running build hook: [filesystems]
[2013-03-29 10:41] -> Running build hook: [keyboard]
[2013-03-29 10:41] -> Running build hook: [fsck]
[2013-03-29 10:41] ==> Generating module dependencies
[2013-03-29 10:41] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-03-29 10:41] ==> Image generation successful
[2013-03-29 10:41] ==> Building image from preset: 'fallback'
[2013-03-29 10:41] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-03-29 10:41] ==> Starting build: 3.8.4-1-ARCH
[2013-03-29 10:41] -> Running build hook: [base]
[2013-03-29 10:41] -> Running build hook: [udev]
[2013-03-29 10:41] -> Running build hook: [modconf]
[2013-03-29 10:41] -> Running build hook: [block]
[2013-03-29 10:41] -> Running build hook: [filesystems]
[2013-03-29 10:41] -> Running build hook: [keyboard]
[2013-03-29 10:41] -> Running build hook: [fsck]
[2013-03-29 10:41] ==> Generating module dependencies
[2013-03-29 10:41] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-03-29 10:41] ==> Image generation successful
[2013-03-29 10:41] upgraded linux (3.7.10-1 -> 3.8.4-1)
[2013-03-29 10:41] upgraded linux-headers (3.7.10-1 -> 3.8.4-1)
[2013-03-29 10:41] upgraded ncurses (5.9-4 -> 5.9-5)
[2013-03-29 10:41] upgraded obex-data-server (0.4.6-4 -> 0.4.6-5)
[2013-03-29 10:41] upgraded openssh (6.1p1-6 -> 6.2p1-1)
[2013-03-29 10:41] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2013-03-29 10:41] upgraded pacman-mirrorlist (20130203-1 -> 20130323-1)
[2013-03-29 10:41] upgraded poppler (0.22.1-3 -> 0.22.2-1)
[2013-03-29 10:41] upgraded poppler-glib (0.22.1-3 -> 0.22.2-1)
[2013-03-29 10:41] upgraded procps-ng (3.3.5-1 -> 3.3.7-1)
[2013-03-29 10:41] upgraded qt4 (4.8.4-13 -> 4.8.4-16)
[2013-03-29 10:41] upgraded raptor (2.0.9-1 -> 2.0.9-2)
[2013-03-29 10:41] refind-efi applications have been installed at /usr/lib/refind/*.efi
[2013-03-29 10:41]
[2013-03-29 10:41] UEFI FS drivers have deen installed at /usr/lib/refind/drivers_*/
[2013-03-29 10:41]
[2013-03-29 10:41] Copy the efi application (according to your UEFI ARCH)
[2013-03-29 10:41] and /usr/lib/refind/config/refind.conf to a sub-directory of <EFISYS>/EFI/
[2013-03-29 10:41] and add an entry to firmware boot menu using efibootmgr or mactel-boot (for Macs)
[2013-03-29 10:41]
[2013-03-29 10:41] rEFInd icons have been installed at /usr/share/refind/icons/
[2013-03-29 10:41]
[2013-03-29 10:41] HTML Documentation is available at /usr/share/refind/docs/html/
[2013-03-29 10:41]
[2013-03-29 10:41] More info at [url]https://wiki.archlinux.org/index.php/UEFI_Bootloaders#Using_rEFInd[/url]
[2013-03-29 10:41]
[2013-03-29 10:41] upgraded refind-efi (0.6.7-1 -> 0.6.8-1)
[2013-03-29 10:41] upgraded shadow (4.1.5.1-4 -> 4.1.5.1-5)
[2013-03-29 10:41] upgraded webkitgtk3 (1.10.2-2 -> 1.10.2-3)
[2013-03-29 10:41] upgraded shotwell (0.13.1-6 -> 0.14.0-1)
[2013-03-29 10:41] upgraded skype (4.1.0.20-5 -> 4.1.0.20-6)
[2013-03-29 10:41] upgraded systemd-sysvcompat (198-1 -> 198-2)
[2013-03-29 10:41] >>> texlive: updating the filename database...
[2013-03-29 10:41] mktexlsr: Updating /etc/texmf/ls-R...
[2013-03-29 10:41] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-03-29 10:41] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-03-29 10:41] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-03-29 10:41] mktexlsr: Done.
[2013-03-29 10:41] recreating all formats... done.
[2013-03-29 10:41] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-03-29 10:41] upgraded texlive-bin (2012.0-7 -> 2012.0-8)
[2013-03-29 10:41] upgraded upower (0.9.19-1 -> 0.9.20-1)
[2013-03-29 10:41] upgraded tracker (0.14.4-3 -> 0.14.5-1)
[2013-03-29 10:41] upgraded webkitgtk2 (1.10.2-2 -> 1.10.2-3)
[2013-03-29 10:41] upgraded xdg-user-dirs-gtk (0.9-1 -> 0.10-1)
[2013-03-29 10:41] upgraded xf86-input-evdev (2.7.3-2 -> 2.8.0-1)
[2013-03-29 10:41] upgraded xf86-input-synaptics (1.6.3-1 -> 1.6.3-2)
[2013-03-29 10:41] installed glamor-egl (0.5.0-4)
[2013-03-29 10:41] upgraded xf86-video-ati (1:7.1.0-1 -> 1:7.1.0-3)
[2013-03-29 10:41] upgraded xf86-video-vesa (2.3.2-2 -> 2.3.2-3)
[2013-03-29 10:41] upgraded xorg-server-common (1.13.3-1 -> 1.14.0-2)
[2013-03-29 10:41] upgraded xorg-server (1.13.3-1 -> 1.14.0-2)
Due to another bug here in rEFInd, I had to downgrade the kernel afterwards
[2013-03-29 10:47] Running 'pacman -U linux-3.7.9-2-x86_64.pkg.tar.xz linux-headers-3.7.9-2-x86_64.pkg.tar.xz'
[2013-03-29 10:48] >>> Updating module dependencies. Please wait ...
[2013-03-29 10:48] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-03-29 10:48] ==> Building image from preset: 'default'
[2013-03-29 10:48] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-03-29 10:48] ==> Starting build: 3.7.9-2-ARCH
[2013-03-29 10:48] -> Running build hook: [base]
[2013-03-29 10:48] -> Running build hook: [udev]
[2013-03-29 10:48] -> Running build hook: [autodetect]
[2013-03-29 10:48] -> Running build hook: [modconf]
[2013-03-29 10:48] -> Running build hook: [block]
[2013-03-29 10:48] -> Running build hook: [filesystems]
[2013-03-29 10:48] -> Running build hook: [keyboard]
[2013-03-29 10:48] -> Running build hook: [fsck]
[2013-03-29 10:48] ==> Generating module dependencies
[2013-03-29 10:48] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-03-29 10:48] ==> Image generation successful
[2013-03-29 10:48] ==> Building image from preset: 'fallback'
[2013-03-29 10:48] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-03-29 10:48] ==> Starting build: 3.7.9-2-ARCH
[2013-03-29 10:48] -> Running build hook: [base]
[2013-03-29 10:48] -> Running build hook: [udev]
[2013-03-29 10:48] -> Running build hook: [modconf]
[2013-03-29 10:48] -> Running build hook: [block]
[2013-03-29 10:48] -> Running build hook: [filesystems]
[2013-03-29 10:48] -> Running build hook: [keyboard]
[2013-03-29 10:48] -> Running build hook: [fsck]
[2013-03-29 10:48] ==> Generating module dependencies
[2013-03-29 10:48] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-03-29 10:48] ==> Image generation successful
[2013-03-29 10:48] upgraded linux (3.8.4-1 -> 3.7.9-2)
[2013-03-29 10:48] upgraded linux-headers (3.8.4-1 -> 3.7.9-2)
Now my icons in GDM and GNOME are missing. The icons in the top panel are not monochrome anymore and the Shell Overview and Web are missing all their icons. Plus they are crashing repeadedly.
Is it possible that this has something to do with the old kernel? Or is this another problem? What does the line
[2013-03-29 10:40] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
mean?
Last edited by mjb (2013-03-30 16:13:45)

mjb wrote:
Is it possible that this has something to do with the old kernel? Or is this another problem? What does the line
[2013-03-29 10:40] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
mean?
Icu was upgraded from 0.50 to 0.51.1 , you probably have packages (could be from AUR) that are build against the old icu version and need to be rebuild.
Check https://bbs.archlinux.org/viewtopic.php?id=160363

[SOLVED] After qemu update: Qtemu broken

After today's qemu update, the GUI frontend qtemu no longer works for me. (As in, you click on the Start button and nothing happens.)
I've added myself to the kvm group, and I've tried changing the qemu binary name from "qemu" to "qemu-x86_64" in the qtemu prefs, but it still refuses to run.
Last edited by Morn (2013-03-09 16:17:53)

skanky wrote:
Morn wrote:
Excellent, it works!
Having to do this for every virtual machine separately is a bit annoying though. Hopefully QtEmu will introduce a global setting for this in a future version.
I don't use Qtemu, but have a script that does the standard qemu launch and call that with each vm's specifics. Anyhow, could you not wrap the binary with a script that does -enable-kvm (etc.) and just specify that in the qtemu settings?
I tried that:
#!/usr/bin/sh
qemu-system-x86_64 -enable-kvm "$@"
Looking at that script now, I notice I messed up the shell path. Should have been /usr/bin/bash or /bin/sh. Oops. There was no error message from QtEmu about the missing shell, so I did not catch that mistake until now. Oh well…
QtEmu is actually rather nice when you frequently create new VMs. I don't want to write a script for every throwaway VM test setup that only exists for a few hours. So I'm glad QtEmu works again.

[solved] After sytem update ALSA only plays sound for root

Hello. Yesterday I performed a system update as usual, and after rebooting I found that my user account does not have any sound anymore. Root has sound just fine. I checked and my user is still in the audio group. I even removed him from the group, added him again, and rebooted but it did not help.
I get these error messages in a terminal:
mplayer:
alsa-lib: pcm_dmix.c:989:(snd_pcm_dmix_open) unable to create IPC semaphore
speaker-test:
ALSA lib pcm_dmix.c:989:(snd_pcm_dmix_open) unable to create IPC semaphore
Playback open error: -13,Permission denied
Running these with a sudo works 100% fine. Alsamixer levels for my user are normal too.
WORKAROUND: Restart timidity service.
SOLUTION: Do not run timidity as a service in the first place.
Last edited by mir91 (2013-11-25 13:37:12)

Thanks for replying.
My root user actually doesn't play sound, I just tried to play some for testing purpose after my normal user suddenly just had silence.
Unfortunately those IPC-changes did not help. However, I removed my /etc/asound.conf file completely for testing purpose and voila, sound suddenly works again. So it seems the last update changed something that does not accept my asound configuration anymore. I will try to experiment a bit with its contents to further narrow it down.
Ok, this is strange
I commented out an entry
period_time 0
and after that my user had sound again. Then I restored that entry and...sound still works.
I will pretend I didn't see anything and just move along I guess.
Last edited by mir91 (2013-11-17 09:28:59)

Unable to restore after E61 update without problem

Hi there,
First post here but I read a lot...
As I was unable to connect on my home WLAN (a USR9106 DSL/modem/router) I decided to update my E61 to the latest firmware.
I had no problem with the backup nor the update... but now, when I try to restore, I get a "memory full: close some application and try again"
But as you can imagine, I have no open application ! (I also didn't forget to allow installation of non trusted application).
Thanks for your help... I'll be in big trouble if I cannot restore...
Tom
PS I backed up on a large SD cardMessage Edited by tompic on 26-Dec-2006
08:38 PM

I have the same problem now, did you find any solution?
Thanks

[SOLVED] After qemu update: KVM does not work anymore

Hi,
I used to use qemu-kvm, as in
qemu-kvm \
-net nic,vlan=1 -net user,vlan=1 \
-drive file=/home/flash-vm/hdd0,if=virtio,cache=writethrough \
-vga std -vnc localhost:2 -usbdevice tablet \
-m 1024
However, now qemu-kvm has been removed. If I replace "qemu-kvm" with "qemu-system-x86_64" and try to run it with an extra argument "-machine accel=kvm" or "-enable-kvm", what I get is
Could not access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied
The kernel modules are there:
# lsmod | grep kvm
kvm_intel 124064 0
kvm 384721 1 kvm_intel
and the processor is
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 37
Stepping: 5
CPU MHz: 1197.000
BogoMIPS: 5321.24
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 3072K
NUMA node0 CPU(s): 0-3
I have added my user to the group kvm as well, as instructed by pacman. Any help would be much appreciated!
Last edited by ffcitatos (2013-03-07 06:47:06)

Interestingly, mine worked without being in the new group. However, I think that's because I hadn't logged out since the update, so the session didn't know that I had been removed from the group. Though I could be missing something.

How to downgrade to ios 7.1.2. bcoz my high speed wifi acts like gprs on my 5S after ios8 update and problem remains same on ios8.0.2.

ios 8 wifi problem

aman_22 wrote:
reset setting = nothing happen
reset network setting = nothing happen
reset all = nothing happen.
now i think android is a gud option
Blur mode asked; did you reset the phone? None of those are a phone reset.
Turn your iOS device off and on (restart) and reset

Touch sensitivity problem after latest update iOS 6.1

Hi guys,
does anyone else have the same problem? After updating my iPhone 5 to latest version iOS 6.1, touch screen stared to work wierd. I have to slide a few times just to unlock my screen. Can not poroperly open any application and when I want to scrool, that's pain in the ***.
Can anyone help me about this? Is that problem with the update iOS 6.1 or my iPhone5, 3 motnhs old become broken?
Thanks in advance.

Hi. I have a 3 years old 3GS which i have updated whenever a new iOS was avaialble. This has been working with improvements besides the fact that the phone gradually is becomming slower with increased functions and especially from iOS 6.0 and up. It has however worked ok keeping in mind that it is a 3 years old phone. With the latest update to iOS 6.1, however, the use af the iphone has severely been affected, much like you other guys are experiencing. The below described behavior of the iphone has never happened before, until the faithfull morning of the 4th of februar, 2013 when i accepted to update the iOS to 6.1. Immediately after the update the problems started:
When sliding to unlock the phone it takes several attemps (sometimes 10 or more) before the slider actally follows my finger to the end and the iphone unlocks.
When typing (eg. a text msg. or email message), it is now allmost impossible to type a meaningfull message because some of the keys do not respond and other only respond to a very hard press. Only when typing very slowly, making sure the touchscreen is actually responding, a usefull message can be made. It seems like the sesitivity of the touchscreen has been altered making it less sensitive.
The same behaviour is observed for other functions and Apps like games which are now impossible to use due to the poor response of the touch screen.
Now i only wish i could roll back the iOS to an earlier version (like 5.1.1) where the iphone was really working well.
I really hope that a new and improved iOS will be out soon to correct for this problem

Still getting GPU Crashes after Graphics Update 1.0 MBP 2010

Hi all,
I am very disappointed after updating my computer to the latest Graphics Update. I have been recieving the problem less frequently before the update but now it's happening often.
27/10/11 1:55:32.000 PM          kernel          NVDANV50HAL loaded and registered.
27/10/11 5:18:36.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:18:36.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:18:36.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
This is a error relating to the GPU retrieved from console. I recieved the black screen bug after waking my computer up from sleep (closing it after the bug wont sleep), then hard powered-off the computer. After a while, I turned the computer back on only to realise that the computer froze at the login screen (the mouse moves and sound will change, brightness controls show, but does not physically change), with the exact same error code from console but a different time.
27/10/11 5:20:41.000 PM          kernel          NVDANV50HAL loaded and registered.
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
27/10/11 5:21:18.000 PM          kernel          NVDA(OpenGL): Channel exception! exception type = 0x6 = Fifo: Parse Error
I have a MacBook Pro 10.7.2, ALL updates except for Aperture and iPhoto (cbf).
What do I have to do now, other than returning computer to Apple Store (that will be my option if no solutions can be made)?

My computer freezes totally randomly, didn't find a solution till now, but I did discover ...
(1) When using an external monitor, can't wake up from sleep, I have to force shutdown . While after the update this problem has Gone. So dealing with external displays is no more the problem, sleep - wake up ,,, all ok.
(2) Before the MacBook Pro video update 1.0, I had no problems at all while using the internal display, Except the Log In screen Freez, and it was randomly, it could happen 3-4 times a month.
(3) After the Update, external display is perfect, but log in screen freez issue increased dramatically.
My Operation system was OS X lion 10.7.2 upgraded from 10.6.8., So I decided to do a Lion clean install.
* I wiped the drive, even made it a new one Partioin, installed 10.7, then 10.7.2 combo update. started to crash even without an external display, and I still didn't even install any applications, so I made the video update, and the computer started to act more crazy.
* Now I installed a new hard drive, with a clean 10.6.8 runnning, I'll test the hardware again, then upgrade to Lion, as I found that the upgrade from 10.6.8 to lion was less troubles, than the Lion clean install.
I hope its not a hardware issue concerning the Macbook Pro, I suspect the Harddrive, as I got a folder named :
( Lost+Found ), though the Lion Clean install on the new drive didn't solve the problem.
( HELP ) !!!
Sorry for the Long post, but I am stuck now, cause I was a mobileMe user, and I upgraded to iCloud, and I am back to 10.6.8 cause I can't deal with the unstability of 10.7.2 and iCloud !!!
MacBookPro 6,2; 15", Mid 2010 ; 2,4 GHz Intel Core i5; 8 GB 1067 MHz DDR3; NVIDIA GeForce GT 330M 256 MB - Mac OS X Lion 10.7.2
Any Suggestions please ...

[SOLVED] After Systemd update...2 problems!

Similar Messages

Maybe you are looking for