[SOLVED] Apache Error code: ssl_error_rx_record_too_long
Hello,
I have been fighting with this error for the past week, with lots of googling, but no dice.
I get the above error when trying to access a web page through apache using ssl.
Any pointers?
I am assuming this is a configuration problem...
Thanks!
Last edited by awayand (2010-07-29 15:09:32)
you obviously have the ssl mod enabled? i'v seen this problem occur when the module is not enabled but the admin thinks that it is. can you verify?
justin
Similar Messages
-
Error code: ssl_error_rx_record_too_long
I can't seem to get any new email from TB. I'm on the latest version 31.4.0. I am able to get my Charter email on my phone and direct off the web. I have double checked the imap.charter.net:143 and smtp.charter.net:25. I did change my password yesterday online with Charter. Now, TB just sits and does nothing.
I get the following errors:
Timestamp: 1/27/2015 6:25:50 PM
Error: An error occurred during a connection to imap.charter.net:143.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)That's an issue with your mail server. Try using another port (you can confer with your mail server's responsibles) or investigate link below:
https://www.digicert.com/ssl-support/apache-fix-common-ssl-errors.htm -
Today, all laptops in the house (latest ver of FF) began throwing the error:
(Error code: ssl_error_rx_record_too_long)
When trying to access any Google products: gmail, Google+, analytics, Google website, etcAha! I'm in South Surrey, BC. I've got a call into a Shaw tech.
-
Who can solve the error code 403 on hp5522 ? help please
who can solve the error code 403 on hp5522 ? help please
Hello fredovolley,
Welcome to the HP Support Forums!
I see that you are experiencing an error 403 with the Photosmart 5520 series. I would like to offer the steps I have given before, check them out here: Re: Trouble scanning using Photosmart 6520
Even though it states it is for a 6520, the steps are all the same. I hope this help, cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
SSL received a record that exceeded the maximum permissible length.
Error code: ssl_error_rx_record_too_long
I get the above message often (but not always) when trying to access my Gmail account, Google docs, calendar, etc. There's really no rhyme or reason for when it works vs. when it doesn't, but I've found that typing in something like "www.gmail.com" never works. When I use the history (or the search bar) it occasionally works.Just cleared out the cache and removed all cookies, but I'm getting the same error when I try to open my Google Calendar.
(Gmail opened just fine a second ago)
I'm a teacher and using my school-provided laptop from home. Could it be something with the school's network filter? (even though I'm not actually on their network)? How can I check? -
How to solve itunes error code 0xE8000012?
how to solve itunes error code 0xE8000012?
These error make mine itunes cannot detect mine iphone 4
my iOS version is 5.1.1
Please i really need some solution to solve this problem
Urgent Thanks!!howdy tej prakash,
you may want to look at this thread ...
- Error -9812 and -1202: Apple Support Communities
https://discussions.apple.com/thread/2153674?start=0&tstart=0
i got that from a search for "itunes error 1202". [*grin*]
take care,
lee -
How to solve the Error code (12/4186)
224733.pgapp01!BRIDGE.2864.1.0: GP_CAT:1069: WARN: Could not index FML32 buffer in postrecv
224733.pgapp01!BRIDGE.2864.1.0: LIBTUX_CAT:6031: ERROR: Unable to pre-process buffer before tranmission. Error code(12/4186)
how to solve it?
Thanks.
:)You should contact BEA customer support about this problem. It is possible
for FML32 buffer indexing to fail if the buffer is not actually an FML32
buffer, if the buffer is not aligned on a 4-byte boundary, or if there is
not enough space in the buffer to store an index. However, none of these
cases should apply to a buffer received in the BRIDGE process.
<YuanSheng Jiang> wrote in message news:[email protected]..
224733.pgapp01!BRIDGE.2864.1.0: GP_CAT:1069: WARN: Could not index FML32buffer in postrecv
224733.pgapp01!BRIDGE.2864.1.0: LIBTUX_CAT:6031: ERROR: Unable topre-process buffer before tranmission. Error code(12/4186)
>
how to solve it?
Thanks. -
Has anyone solved the "Error Code 0x80020022"
"The disc can’t be burned because communication between the computer and the disc drive failed (error code 0x80020022)."
I have researched this at length as I have just been getting this message, but I don't see how to resolve it.
Has it ever been resolved and if so, I would really like to know how.
CheersMichael,
An update on the ongoing superdrive error:
At the time I responded to your post, I was burning DVD+Rs because my superdrive didn't like -Rs very much and would error out on them. Yesterday, to test my theory on Disk Warrior, I bought some DVD-Rs and burned about 3 in a row successfully before I got the 0x80020022 error again. I ran Disk Warrior again and have been burning the -Rs consistenty (I have a lot of junk to archive off my HD.) But I thought that the type of media might be important to the conversation because the superdrive appears to like one type of DVD blank over another.
Some key points:
1) You said you're using a Mac Mini as your bootup disk. I am using a MacBookPro. This may be significant.
2) Because the error reappears routinely, this is by no means a complete fix. It needs to be repeated when the error reappears. However, in lieu of a more permanent solution, I'll take one that appears to work, even temporarily, until Apple or somebody out there can tell us how to fix this more permanently.
3) Because it appears to be fixed after running Disk Warrior, I am going to conclude that it is a software error, one of the operating system not communicating with the superdrive, and has little or nothing to do with the drive or the media, as I've read on other forums regarding this error. Of course, if your drive really has gone bad, who's to say that it won't prompt the same error, if it is an all-purpose error. I had my superdrive replaced last year, so I'm pretty sure it's not the drive.
Jim -
This is the error I get when I go to Facebook - Error code: ssl_error_rx_record_too_long
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled -
How do I solve the error code -19946, Microsoft Outlook for Mac 2011
I'm getting an error: error code -19946
Error
Could not synchronize record: <Message Name> to Exchange server: <Exchange Server Name>
Details
ChangeKey is required for this operation.
Error code
-19946
when using Microsoft Outlook for Mac 2011. When looking up the error, Microsoft has a solution for windows users, but not for mac users. http://support.microsoft.com/kb/2556352
Any ideas? Solutions? Help!As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful. -
The website can be accessed ok from another computer in the office. It happened about 3 days ago (I think after an auto update) and I hoped it would clear. I use win8.1. I tried one of the solutions and deleted Cert8db in the profile, but that did not help. I also re-set Nightly and it did not solve the problem.
Any help would be appreciated.Check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
Which security software (firewall, anti-virus) do you have?
Some firewalls monitor (secure) connections and may be causing problems with secure connections. -
Is this a problem with my pc or the website? Does it make a difference if the site is password protected?
Hi,
There was a LONG discussion on the forum 4 months ago about this exact issue and it was affect Shaw customers. You can see it at [/questions/976504]. However, cor-el mentioned a fix that worked for users and it said:
Make sure to reset the security.tls.version.max pref to 1 if you have previously changed this pref to 0 to disable TLS 1.0
Can you see if that helps?
This is most likely not what's happening but it's safe to go over previously solved questions. -
How to solve problem error code 0x610000f6 7500A All in one
I have cleared paper jam turned off and on power. Restarted printer tried removing cartrages and I still have this error any ideas on how to get it to stop and work right
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
function fontcheck (){
fonts=null;
//var fonts=document.fonts.everyItem().getElements();
var _docFonts = app.activeDocument.fonts.everyItem().getElements();
var myDoc=app.activeDocument
var fontlist = []
for (var i = 0; i < _docFonts.length; i++) {
var fontName = _docFonts[i].fullName;
var fontpath= _docFonts[i].location;
var mm=String(fontpath);
var s=String.fromCharCode(92)
var ms=String("C:"+(s)+"Windows"+(s)+"Fonts"+(s));
mm=mm.substring(0,17);
if (mm==ms)
alert ("The Document contain System font Please fix the font using find font option");
exit()
mm=null;
fonts=null;
else
if (mm=="System Font")
alert ("The Document contain System font Please fix the font using find font option");
exit()
mm=null;
fonts=null;works for me. Perhaps you can tell more about what happens?
-
How to solve error code 150:30?
Restarting my computer does not solve the error code 150:30, licensing problem. Any suggestions?
The simple answer, if it's a Mac is to reinstall from the discs.
Error "Licensing has stopped working" | Mac OS
If it's Windows, there is a License Repair Tool.
Gene
Maybe you are looking for
-
How do i view and print pdf file in mac osx with ff4.0?
How do i view and print pdf files in ff 4.0 on a mac with osx. for some reason the updated ff version does not support it. Makes no sense that something that worked in an earlier version now does not... Thanks, Ron
-
Is it normal that i hear my fan on my macbook pro?
wow i was uploading a video to youtube via screenflow and i could hear my fan really load i have never heard my fan like that is that normal? Message was edited by: go lakers
-
Oracle jdbc driver with debug capability
I have been using MagicDraw UML to reverse engineer DDL and UML classes from Oracle databases. I recently loaded some public domain hydrology data using FEM, a geophysical data translation tool. After doing this, I get: Parsing failed (Oracle - sampl
-
Can we add iview directly to role
plz let me know if any steps not the links
-
Java.lang.Error: IP Helper Library GetIfTable function failed
Some of our users are sometimes getting the following exception: java.lang.Error: IP Helper Library GetIfTable function failed java.net.NetworkInterface.getAll(Native Method) java.net.NetworkInterface.getNetworkInterfaces(Unknown Source) Does anyone