[Solved] Arch and virtual networking, not working as planned.

Running pfSense trough virtualbox, running virtual machines behind it.
What setup do I need, to get wireless LAN solely to pfSense. Currently I use the bridged setup in virtualbox as the WAN side. LAN is a host only adapter vboxnet0, all other VM's connect through that virtual adapter.
I would like to use a second host only adapter on a different subnet, but, once I create the adapter vboxnet1 and add it as second LAN card OPT1 to pfSense, internet stops working on the first LAN, though I can still ping google from the pfSense box.
How do I get Arch to not use the wireless connection but only the second host only adapter.
At the moment I use NetworkManager for the network.
Current setup (working):
Router – 192.168.1.1
Arch bare hardware, main OS – 192.168.1.9 (wireless)
pfSense WAN - 192.168.1.12 ( through wireless)
pfSense LAN - 10.10.2.1
host only adapter vboxnet0 - 10.10.2.3
I would like to add (not working):
pfSense OPT1 - 10.10.10.1
host only adapter vboxnet1 - 10.10.10.3
But this fails for unknown reasons.
What do I miss, or should I do different, thanks in advance, Mark
Last edited by qinohe (2015-01-30 12:39:32)

All is working well. I extended to four virtual adapters, one for the Arch host, and a wireless AP connected to eth0, bridged to pfSense. All applications on the host are finding the pfSense squid proxy, I have libproxy installed. Set the default gateway on the host to be the proxy of pfSense.
Now I can use my laptop to connect to insecure networks while not belonging to it, and host for friends at the same time, very nice

Similar Messages

Virtual pc and virtual network not starting!

Hi
Just installed Virtual pc and WIndows xp
When I reboot my mac mini, and start up Virtual PC it says that it cannot start Virtual Network. So then I cant connect to the internett.
Is there a workaround to make it work?
The message says that I should go to Microsoft site and the code is A1004. It also say that I should restart mac and then start up Virtual PC... then it will work. But it does not!

Here is the message I first got when I tried to start up Virtual PC.
http://homepage.mac.com/baiaz/virtualpc.jpg
In a Norwegian Forum for mac, somebody said that I should upgrade Virtual PC 7 to Version 7.0.2.
I just did and now I dont get this message but still I cant get into internett. any solutions?

[SOLVED]ping and incoming connections not working

Problem: eg.
$ ping google.com
PING google.com (209.85.148.99) 56(84) bytes of data.
no answer so i press ctrl+c, i get:
^C
--- google.com ping statistics ---
56 packets transmitted, 0 received, 100% packet loss, time 54999ms
i can't use any torrent client because it accepts connections only then i start client(tested with deluge and transmission). eg. i start deluge->torrent start upload->later it won't start upload, but it sends to server info, server get that info(i tested in situation there i'm the only seeder and there is only one leecher which is under my control)
thoughts about that: i searched for solution for a long time, i very doubt that is a software issue, i think it's hardware problem(and about hardware i know nothing). why i think so:
possible cause of problem:
1. kernel upgrade to 3.0=with ubuntu live cd same problems, so it can't be it
2. i deleted windows xp, windows writes something to network card or bios?
3. hardware problem
before problems started i not did something big, so problem could cause only these 3 items.
i don't have firewall, there was one but for testing purposes i deleted it.
network card Realtek RTL-8169 Gigabit Ethernet, driver is latest(but tested and older version)
i tested with 2 different ISP's. one connected over lan and another just my phone connected as modem over usb cable. in both cases ping not work and all other network services works ok, i can browse, ftp works, i can download torrent(if torrent download starts with program start, not later), skype works, internet radio works, etc.
question: what to do, to make torrents work as they worked earlier? i have this problem about few weaks, in past 3 years i don't have such problems.
Last edited by gymka (2011-08-29 14:04:29)

I(i mean browser) can reach everything and everythere, but "ping" can't reach sites. Tried ping sites in my country, same result. i get answer from ping only then i ping these sites:
127.0.0.1
and
84.55.46.19(my ISP site for clients)
i can't even ping 192.168.0.1(it's router, so how can i browse if i can't reach router?)
and i can't ping 84.55.46.27(it's my ISP site for public)
# tcptraceroute archlinux.org
Selected device eth0, address 192.168.15.10, port 42318 for outgoing packets
Tracing the path to archlinux.org (66.211.214.131) on TCP port 80 (http), 30 hops max
1 192.168.15.1 0.940 ms 0.596 ms 0.553 ms
2 84.55.40.129.ip.greitas.lt (84.55.40.129) 3.047 ms 2.047 ms 2.649 ms
3 10.10.20.20 5.741 ms 5.935 ms 5.010 ms
4 * * *
^C
Same problems with different ISP so it's not my ISP problem.
Another thing:
# netstat -lnp|grep deluge
unix 2 [ ACC ] STREAM LISTENING 344527 1560/python2 /home/gymka/.config/deluge/ipc/deluge-gtk
as i understand 344527 is port on which app listens, but in application shows that it listens on 51128, then i configured to use only 51128 and restarted deluge
# netstat -lnp|grep deluge
unix 2 [ ACC ] STREAM LISTENING 522255 1641/python2 /home/gymka/.config/deluge/ipc/deluge-gtk[/deluge]
transmission atleast shows that port 57781(don't know if it listen it)
# netstat -lnp|grep transmission
tcp 0 0 0.0.0.0:57781 0.0.0.0:* LISTEN 1833/transmission-g
tcp 0 0 :::57781 :::* LISTEN 1833/transmission-g
udp 0 0 239.192.152.143:6771 0.0.0.0:* 1833/transmission-g
udp 0 0 0.0.0.0:57781 0.0.0.0:* 1833/transmission-g
unix 2 [ ACC ] STREAM LISTENING 709406 1833/transmission-g /tmp/at-spi2/socket-1833-1804289383
Last edited by gymka (2011-08-28 06:20:12)

Bluetooth and wireless network not working

About a week ago my iphone 4s stopped discovering my bluetooth devices. Today, it will not let me log onto my wireless network as well. I have reset both my phone and router, but nothing seems to be working. Any suggestions?

While trying to log onto my wireless network I get an error message stating that I have used an incorrect password, but the password is correct and works with my other devices.

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

[SOLVED] Cannot start Virtual Network: "out of memory"

I am attempting to use KVM, Qemu and libvirt to run Windows VM's to test websites in IE. I have gotten everything to work fine except guest to host communication, which obviously is crucial for testing the websites.
Currently i am using macvtap to setup networking, which works beautifully for everything except host to guest networking. The easiest way seems to be to use isolated virtual networks. However, i cannot start any virtual networks. I have tried from inside virtual manager and inside virsh command prompt. I always get "out of memory". I have googled the error and nobody seems to have this problem.
One note, I do NOT have a swap drive. Is this needed for virtual networks?
EDIT:
I have now tried exactly the same on another, identical computer but with swap drive (16gb) and it did not work there either. Both computers have 8gb ram. Seems to be loads free in tops.
Last edited by sup3rman (2015-01-23 12:29:50)

sup3rman wrote:
I am attempting to use KVM, Qemu and libvirt to run Windows VM's to test websites in IE. I have gotten everything to work fine except guest to host communication, which obviously is crucial for testing the websites.
Currently i am using macvtap to setup networking, which works beautifully for everything except host to guest networking. The easiest way seems to be to use isolated virtual networks. However, i cannot start any virtual networks. I have tried from inside virtual manager and inside virsh command prompt. I always get "out of memory". I have googled the error and nobody seems to have this problem.
One note, I do NOT have a swap drive. Is this needed for virtual networks?
EDIT:
I have now tried exactly the same on another, identical computer but with swap drive (16gb) and it did not work there either. Both computers have 8gb ram. Seems to be loads free in tops.
I have the same issue on my install. I got so desperate that I actually wiped my laptop and reinstalled everything, same problem. Out of memory error when trying to create the default network. 16GB of RAM, with 96% of it free when I attempted.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?

In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations. What I can do? Help ………

IT NOT WORK IN MEXICO. THANKS A LOT. BEST REGARDS. MANUEL LOPEZ
El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
You received a reply
SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?
Correct Answer Helpful Answer
Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to SGIII, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?, I have installed windows 7 on my mac book, but sound card and cam is not working in windows wht to do?

I am using Mac book with windows 7. But my sound card and cam is not working when booted through windows. How can I solve this?
Thanks

Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

Extraction and Reporting is not working in BI SYSTEM

Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

I am using laptop hitting and slow system not working

i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Note: If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
Can you also post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT4623 My iPhone4s updated to 7.1.1 and now my internet and email is not working. I need help?

Sorry, I'm new to this, I installed IOS 7.1.1 on my iPhone 4s and now my internet and email is not working.
I have googled this on my computer and can't find any reference to this sort of problem.
I need help.
Thanks in advance.

Try this:
Go to Settings > General > Reset > Reset Network Settings
See if you are able to connect now.

I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

[Solved] Arch and virtual networking, not working as planned.

Similar Messages

Maybe you are looking for