[SOLVED] Arch freezes after scanning LVM VGs at boot

Hi there,
recently ArchLinux started printing some udev errors at boot. After an update the system freezes at startup after detecting the LVM volume groups (3 lvm volumes found in volume group "Laptop" or something similar).
This is my hard disk configuration:
0 - 200MB, ext2, /boot
1 - 100MB, NTFS, $something that belongs to Windows
2 - 50GB, NTFS, Windows 7
3 - Extended
4 - 100GB, NTFS, data
5 - 150GB, lvm
5.1 - swap
5.2 - root, jfs
5.3 - home, jfs
If you need more informations just ask me for them.
Thanks in advance.
Last edited by turlando (2012-05-01 12:35:41)

Exactly same problem here. today's update has freezed my Arch linux and it gets stuck after detecting the LVM groups (5 lvm volumes found in volume group data in my case).
Just run a "pacman -Syu" and restarted system today 30/04/2012.
thanks in advance
(posting message from my windows 7 installation)

Similar Messages

  • [SOLVED] Arch freezes after mounting drives, cannot boot

    Installed Arch maybe a week ago, and everything worked flawlessly until i rebooted today.
    I havent done any major changes during that session that i recall, and after a reboot, my arch "froze" mid boot, after (what i think is) mounting drives (sda3 is OS, sda5 is Data):
    /dev/sda3: clean, 168249/2298240 files, 1485743/9175040 blocks
    [      4.203801] microcode: failed to load file amd-ucode/microcode_amd.bin
    [      4.204249] microcode: failed to load file amd-ucode/microcode_amd.bin
    [      4.204628] microcode: failed to load file amd-ucode/microcode_amd.bin
    [      4.204940] microcode: failed to load file amd-ucode/microcode_amd.bin
    systemd-fsck[248]: /dev/sda5: clean, 5230/3932656 files, 475548/15729635 blocks
    This is all the info that i get.
    If i remember right, this was shown when arch was booting up normally too, but it ussualy just hanged for a second or two at it. I've tried leaving it for almost half an hour now, and it didnt budge.
    And it doesnt actually freeze, since there is a blinking " | " after the last line (no input is being accepted though)
    This might be something stupidly simple, but im completely new to Arch (and linux in general)
    I do have a live cd though, so if there's any conf that you think would help, i can get it.
    Last edited by TolSatha (2012-12-28 01:09:24)

    cfr wrote:
    Welcome to Arch.
    Please search before posting:
    https://encrypted.google.com/search?hl= … lla-search
    https://wiki.archlinux.org/index.php/Microcode
    https://bbs.archlinux.org/viewtopic.php?id=144699
    etc.
    Will try resolving that, but ive had that before, and arch booted just fine. I doubt thats the problem.

  • Arch freezes after about 10 minutes with new kernel [SOLVED]

    As the title says: Arch freezes after about 10 minutes with new kernel (2.6.27). I can only move a mouse, but everything else is frozen. Even restarting X doesn't do a trick. It doesn't work at all. Frozen.
    I don't get any kind of error message (oh really?), so what's the problem..?
    Last edited by Exitium (2008-10-22 15:29:27)

    juan_sck wrote:
    Exitium wrote:
    test1000 wrote:I had an issue with only being able to move the mouse after logging in from gdm and nothing happening but i don't know if thats the same error Sooo, are you using the right nvidia drivers? their driverpolicy just changed, and we now have 4 different official nvidia drivers in repo :S
    Yeah... I'm using nvidia... So the problem is nvidia drivers, not the Linux kernel?
    Edit: My card is nVidia GeForce 8800 Ultra. I can't get driver information now, because I'm using WinXP right now. I'll check it later.
    Did you make a new install or just updated?
    You can try to reinstall old kernel with:
    pacman -U /var/cache/pacman/pkg/kernel(version you want).pkg.tar.gz
    if you made a new install you may have to install the xorg keyboard driver and so.
    By the way, there are a few diferent packages for nvidia drivers. Check wich is yours.
    Also check /var/log/ folder for errors.
    Updated kernel.
    And as I said, I'll check the driver later.

  • [SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

    After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
    So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
    But the same thing happens in comand line only mode.
    Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
    Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
    Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

    Me wrote:
    It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
    H/W path Device Class Description
    ===============================================
    system GA-970A-UD3
    /0 bus GA-970A-UD3
    /0/0 memory 128KiB BIOS
    /0/4 processor Athlon
    /0/4/a memory 128KiB L1 cache
    /0/4/c memory 2MiB L3 cache
    /0/b memory 128KiB L1 cache
    /0/29 memory 8GiB System Memory
    /0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
    /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
    /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
    /0/100/2/0 display GF106 [GeForce GTS 450]
    /0/100/2/0.1 multimedia GF106 High Definition Audio Controller
    /0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
    /0/100/4/0 bus EJ168 USB 3.0 Host Controller
    /0/100/4/0/0 usb3 bus xHCI Host Controller
    /0/100/4/0/0/2 storage ADATA USB Flash Drive
    /0/100/4/0/1 usb2 bus xHCI Host Controller
    /0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
    /0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    /0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
    /0/100/a/0 bus EJ168 USB 3.0 Host Controller
    /0/100/a/0/0 usb8 bus xHCI Host Controller
    /0/100/a/0/1 usb7 bus xHCI Host Controller
    /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/12/1 usb6 bus OHCI Host Controller
    /0/100/12/1/5 input M Dongle
    /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/12.2/1 usb1 bus EHCI Host Controller
    /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/13/1 usb9 bus OHCI Host Controller
    /0/100/13/1/1 input USB Receiver
    /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/13.2/1 usb4 bus EHCI Host Controller
    /0/100/14 bus SBx00 SMBus Controller
    /0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
    /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
    /0/100/14.4 bridge SBx00 PCI to PCI Bridge
    /0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
    /0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
    /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    /0/100/14.5/1 usb10 bus OHCI Host Controller
    /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
    /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/16/1 usb11 bus OHCI Host Controller
    /0/100/16/1/3 multimedia USB Web Camera
    /0/100/16/1/4 multimedia USB Sound Device
    /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/16.2/1 usb5 bus EHCI Host Controller
    /0/101 bridge Family 15h Processor Function 0
    /0/102 bridge Family 15h Processor Function 1
    /0/103 bridge Family 15h Processor Function 2
    /0/104 bridge Family 15h Processor Function 3
    /0/105 bridge Family 15h Processor Function 4
    /0/106 bridge Family 15h Processor Function 5
    /1 scsi6 storage
    Working again. I think problem was the partition was full.
    Last edited by gyurman (2014-04-13 07:51:22)

  • Arch freezing after install

    Hi! I have installed Arch and after restart it freezes when loading modules. Sometimes it loads them and fails in some configuring part, don't remember exactly what configuration. If i get it booted it freezes few minutes later. I have installed it many times now with different partition formats and same happens everytime

    Sorry for replying late. I have few years old laptop which had ran Arch well earlier.  There's some 8mb corrupted part or something like that in hdd, but that part is not in use. http://eu.computers.toshiba-europe.com/ … _ID=120941
    I installed Debian yesterday and it worked well until I broke it, so is that freezing about my arch install or what?
    Last edited by rixutin (2009-11-11 14:22:49)

  • [SOLVED]pc freezes after resuming from suspend.

    When I upgraded kernel from linux-3.3.8-1 to linux-3.4.2-2 or later  , PC freezes after resuming.
    Monitor comes back and kde requires passward , but after few seconds , everything freezes.
    keyboard and mouse won't respond.
    There is no log after resuming.
    Is there anybody who have same trouble?
    CPU intel core i7 2600k
    MB asrock H67M-GE
    /var/log/pm-suspend.log
    Initial commandline parameters:
    Thu Jun 21 16:52:33 JST 2012: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux myhost 3.4.3-1-ARCH #1 SMP PREEMPT Mon Jun 18 08:28:29 CEST 2012 x86_64 GNU/Linux
    Module Size Used by
    w83627ehf 31388 0
    hwmon_vid 3196 1 w83627ehf
    xt_hl 1369 6
    ip6t_rt 2112 3
    nf_conntrack_ipv6 6650 7
    nf_defrag_ipv6 6401 1 nf_conntrack_ipv6
    ipt_REJECT 2281 1
    xt_LOG 11975 9
    xt_limit 2041 12
    xt_tcpudp 2503 18
    xt_addrtype 2853 4
    xt_state 1295 14
    ip6table_filter 1396 1
    ip6_tables 18198 2 ip6table_filter,ip6t_rt
    nf_conntrack_netbios_ns 1077 0
    nf_conntrack_broadcast 1285 1 nf_conntrack_netbios_ns
    nf_nat_ftp 1668 0
    nf_nat 15100 1 nf_nat_ftp
    nf_conntrack_ipv4 6871 9 nf_nat
    nf_defrag_ipv4 1339 1 nf_conntrack_ipv4
    nf_conntrack_ftp 6261 1 nf_nat_ftp
    nf_conntrack 61584 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_state,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6
    iptable_filter 1456 1
    ip_tables 16946 1 iptable_filter
    x_tables 16954 12 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_state,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype
    snd_hda_codec_hdmi 23672 1
    snd_hda_codec_realtek 60377 1
    vboxdrv 1792262 0
    acpi_cpufreq 5933 1
    aesni_intel 43154 0
    mperf 1267 1 acpi_cpufreq
    snd_hda_intel 24053 4
    aes_x86_64 7508 1 aesni_intel
    ppdev 5902 0
    aes_generic 26138 2 aesni_intel,aes_x86_64
    ghash_clmulni_intel 4237 0
    r8169 49354 0
    i915 438164 3
    video 11307 1 i915
    i2c_i801 8180 0
    i2c_algo_bit 5391 1 i915
    drm_kms_helper 33051 1 i915
    drm 208958 4 i915,drm_kms_helper
    parport_pc 30765 0
    intel_agp 10936 1 i915
    mei 32152 0
    psmouse 70792 0
    pcspkr 1899 0
    processor 26567 1 acpi_cpufreq
    evdev 9754 6
    button 4502 1 i915
    intel_gtt 14047 3 i915,intel_agp
    parport 31395 2 ppdev,parport_pc
    i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
    serio_raw 4653 0
    cryptd 8741 2 ghash_clmulni_intel,aesni_intel
    coretemp 5654 0
    iTCO_wdt 12813 0
    mii 4123 1 r8169
    iTCO_vendor_support 1929 1 iTCO_wdt
    snd_hda_codec 94273 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    crc32c_intel 1987 0
    snd_hwdep 6300 1 snd_hda_codec
    snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18966 2 snd_pcm
    snd 58997 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5410 1 snd
    microcode 12185 0
    ext4 424175 2
    crc16 1359 1 ext4
    jbd2 73919 1 ext4
    mbcache 5977 1 ext4
    usbhid 36430 0
    hid 85285 1 usbhid
    ehci_hcd 41154 0
    usbcore 147533 3 ehci_hcd,usbhid
    usb_common 954 1 usbcore
    floppy 58615 0
    sr_mod 14823 0
    cdrom 35648 1 sr_mod
    sd_mod 29239 4
    ahci 20549 4
    libahci 20023 1 ahci
    libata 167611 2 ahci,libahci
    scsi_mod 132942 3 libata,sd_mod,sr_mod
    total used free shared buffers cached
    Mem: 7900332 743308 7157024 0 34932 257560
    -/+ buffers/cache: 450816 7449516
    Swap: 15359996 0 15359996
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /etc/pm/sleep.d/90alsa suspend suspend:
    /etc/pm/sleep.d/90alsa suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Jun 21 16:52:33 JST 2012: performing suspend
    Last edited by remingtontonpon (2012-07-25 01:58:04)

    In my case, monitor freezes too.
    And I have only one PC, so i can't try ssh.
    I logged into runlevel3 and try
    sudo pm-suspend
    and it works fine. So it seems this trouble caused only in runlevel5.
    I also tried following command in runlevel5
    # echo freezer > /sys/power/pm_test
    # echo mem > /sys/power/state
    # echo devices > /sys/power/pm_test
    # echo mem > /sys/power/state
    # echo platform > /sys/power/pm_test
    # echo mem > /sys/power/state
    # echo processors > /sys/power/pm_test
    # echo mem > /sys/power/state
    # echo core > /sys/power/pm_test
    # echo mem > /sys/power/state
    Everything works fine but sudo pm-suspend failed.
    Last edited by remingtontonpon (2012-06-25 08:18:26)

  • [solved] makepkg freeze after installing dependencies

    If I try to create a package from the AUR
    makepkg -sfi package-name
    seems to freeze after installing the dependencies. It just stops after installing the last dependency and freezes with 65% CPU-Usage.
    If I quit makepkg after freeze and run it again, building the package works so the dependencies get correctly installed.
    Note to AUR-Helpers:
    Yaourt -> works
    Packer -> works
    pacaur -> doesn't work
    Any Idea what could cause this Problem and how to fix it?
    Last edited by mak42 (2014-09-05 20:45:42)

    Soooo I've found the guilty after digging through the source of "makepkg"
    source /etc/profile &>/dev/null
    causes the problem, if I run this command it freezes, Ctrl+C will kill the whole terminal.
    So now I know the source of the Problem, still trying to figure out why this happens...
    EDIT: Found it I'm using tdm as login-manager, to start it I've put a script into /etc/profile.d/ and this Script gave back an Error "Invalid TTY".
    If you source /etc/profile it can't complete due to this Error.
    So it was completely my fault
    Thank's for your help, now I have to find another way of starting TDM
    EDIT2:
    just put /usr/bin/tdm into ~/.bash_profile and tdm works fine.
    Actually this is already in the wiki, don't know why I didn't do that in the first place
    Last edited by mak42 (2014-09-05 21:00:19)

  • Installing Arch Linux after Windows 7 64bit dual boot

    Total noob here ^^
    Im trying to install Arch Linux after my installation of Windows 7, without fucking up that one...
    I freed up 50GB and removed it from my Windows boot partition, so Arch can be installed there, I have almost absolutely no experience with this kind of stuff since I've only used Ubuntu and Kali Linux before.
    I've got a working arch image on my usb stick and i somehow can't figure out, how to install it without touching the existing partitions.
    Is it possible to create a working dual boot, without changing my windows configuration?

    yes its possible. What research have you done in order to install Arch. We do not hand hold here in this community. Go read up the appropriate wiki pages and ask specific questions with details in case you get stuck.
    Start with the Beginners Guide.

  • [solved] Arch freezes before login

    Hello there,
    today I restarted my computer after about 4 days uptime to clean the dust and reconnect my DVD derive. For this I removed my radeon graphics card and a usb device I didn't need.
    After cleaning and reconnecting everything I tried to start my computer. My BIOS didn't let me and told me that my hard disk drive was failing and I should back it up and insert a 'proper' boot medium. I didn't really believe it because not so a long time ago I checked this device and it was completly fine. I disconnected the DVD drive and indeed my BIOS let me pass without any trouble.
    But now Arch boots to the login shell and just freezes. I only get enough time to enter the first few letters of my username. Before the boot screen clears for the login screen I always get a glance on a error about my graphics card (a radeon hd 6850, I use the radeon driver) and another device and that they are initialized in a generic mode or something. Couldn't find anything in the logs about that.
    Here are they and I hope someone is able to help:
    errors.log;
    Apr 10 11:00:32 localhost kernel: [13239.127128] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 11:00:32 localhost kernel: [13239.230302] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 11:00:32 localhost kernel: [13239.333550] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 11:29:11 localhost /usr/sbin/crond[757]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
    Apr 10 11:29:12 localhost kernel: [ 5.247408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    Apr 10 11:29:13 localhost dhcpcd[661]: eth0: sendmsg: Cannot assign requested address
    Apr 10 11:39:02 localhost kernel: [ 600.497461] sd 6:0:0:0: [sdb] No Caching mode page present
    Apr 10 11:39:02 localhost kernel: [ 600.497466] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Apr 10 11:39:02 localhost kernel: [ 600.500091] sd 6:0:0:0: [sdb] No Caching mode page present
    Apr 10 11:39:02 localhost kernel: [ 600.500095] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Apr 10 11:39:02 localhost kernel: [ 600.656186] sd 6:0:0:0: [sdb] No Caching mode page present
    Apr 10 11:39:02 localhost kernel: [ 600.656190] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Apr 10 15:41:56 localhost kernel: [ 5876.442283] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 15:41:56 localhost kernel: [ 5876.544457] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 15:41:56 localhost kernel: [ 5876.647780] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 23:27:41 localhost kernel: [16940.661233] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 23:27:41 localhost kernel: [16940.766765] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 23:27:41 localhost kernel: [16940.869935] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 17:21:00 localhost kernel: [20588.434135] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 17:21:00 localhost kernel: [20588.435869] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 17:21:00 localhost kernel: [20588.539596] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:02:41 localhost kernel: [25592.893677] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:02:41 localhost kernel: [25592.995809] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:02:41 localhost kernel: [25593.099094] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:05:39 localhost ata_id[12267]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 11 19:07:59 localhost kernel: [25917.827291] sd 8:0:0:0: [sdc] No Caching mode page present
    Apr 11 19:07:59 localhost kernel: [25917.827295] sd 8:0:0:0: [sdc] Assuming drive cache: write through
    Apr 11 19:07:59 localhost kernel: [25917.830813] sd 8:0:0:0: [sdc] No Caching mode page present
    Apr 11 19:07:59 localhost kernel: [25917.830817] sd 8:0:0:0: [sdc] Assuming drive cache: write through
    Apr 11 19:07:59 localhost kernel: [25917.906660] sd 8:0:0:0: [sdc] No Caching mode page present
    Apr 11 19:07:59 localhost kernel: [25917.906664] sd 8:0:0:0: [sdc] Assuming drive cache: write through
    Apr 11 19:31:46 localhost ata_id[23321]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 11 19:31:48 localhost ata_id[23349]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 11 19:31:49 localhost ata_id[23358]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 12 10:31:46 localhost kernel: [41074.655485] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 10:31:46 localhost kernel: [41074.757712] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 10:31:46 localhost kernel: [41074.860847] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 17:27:02 localhost kernel: [43038.005295] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 17:27:02 localhost kernel: [43038.107420] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 17:27:02 localhost kernel: [43038.210662] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 18:03:40 localhost kernel: [45244.094026] hub 6-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
    Apr 12 22:57:48 localhost kernel: [46996.101540] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 22:57:48 localhost kernel: [46996.203669] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 22:57:48 localhost kernel: [46996.306895] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 06:48:04 localhost kernel: [49544.131279] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 06:48:04 localhost kernel: [49544.233392] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 06:48:04 localhost kernel: [49544.234948] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:22:52 localhost kernel: [50732.517856] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:22:52 localhost kernel: [50732.620028] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:22:52 localhost kernel: [50732.723191] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:24:40 localhost kernel: [50848.424796] sd 9:0:0:0: [sdb] No Caching mode page present
    Apr 13 10:24:40 localhost kernel: [50848.424800] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    Apr 13 10:24:40 localhost kernel: [50848.427413] sd 9:0:0:0: [sdb] No Caching mode page present
    Apr 13 10:24:40 localhost kernel: [50848.427417] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    Apr 13 10:24:40 localhost kernel: [50848.515912] sd 9:0:0:0: [sdb] No Caching mode page present
    Apr 13 10:24:40 localhost kernel: [50848.515916] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    Apr 13 19:52:08 localhost kernel: [81867.864800] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 19:52:08 localhost kernel: [81867.966901] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 19:52:08 localhost kernel: [81868.070164] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 03:47:04 localhost kernel: [88628.314034] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 03:47:04 localhost kernel: [88628.416250] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 03:47:04 localhost kernel: [88628.522848] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 16:52:01 localhost kernel: [88690.920669] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 16:52:01 localhost kernel: [88690.922415] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 16:52:01 localhost kernel: [88690.924031] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    pacman.log
    [2012-04-10 11:46] Running 'pacman-color -Syu'
    [2012-04-10 11:46] synchronizing package lists
    [2012-04-10 11:46] starting full system upgrade
    [2012-04-10 11:46] upgraded akonadi (1.7.1-1 -> 1.7.2-1)
    [2012-04-10 11:46] upgraded arch-wiki-docs (20111219-1 -> 20120410-1)
    [2012-04-10 11:46] upgraded girara-common (0.1.1-1 -> 0.1.2-1)
    [2012-04-10 11:46] upgraded girara-gtk2 (0.1.1-1 -> 0.1.2-1)
    [2012-04-10 11:47] upgraded gparted (0.12.0-2 -> 0.12.1-1)
    [2012-04-10 11:47] unregistering X11-1.5.0.1 would break the following packages: xmonad-0.10 (ignoring)
    [2012-04-10 11:47] Reading package info from stdin ... done.
    [2012-04-10 11:47] --read-interface=array-0.4.0.0,array-0.4.0.0/array.haddock --read-interface=base-4.5.0.0,base-4.5.0.0/base.haddock --read-interface=binary-0.5.1.0,binary-0.5.1.0/binary.haddock --read-interface=bin-package-db-0.0.0.0,bin-package-db-0.0.0.0/bin-package-db.haddock --read-interface=bytestring-0.9.2.1,bytestring-0.9.2.1/bytestring.haddock --read-interface=Cabal-1.14.0,Cabal-1.14.0/Cabal.haddock --read-interface=containers-0.4.2.1,containers-0.4.2.1/containers.haddock --read-interface=deepseq-1.3.0.0,deepseq-1.3.0.0/deepseq.haddock --read-interface=directory-1.1.0.2,directory-1.1.0.2/directory.haddock --read-interface=extensible-exceptions-0.1.1.4,extensible-exceptions-0.1.1.4/extensible-exceptions.haddock --read-interface=filepath-1.3.0.0,filepath-1.3.0.0/filepath.haddock --read-interface=ghc-prim-0.2.0.0,ghc-prim-0.2.0.0/ghc-prim.haddock --read-interface=haskell2010-1.1.0.1,haskell2010-1.1.0.1/haskell2010.haddock --read-interface=haskell98-2.0.0.1,haskell98-2.0.0.1/haskell98.haddock --read-interface=hoopl-3.8.7.3,hoopl-3.8.7.3/hoopl.haddock --read-interface=hpc-0.5.1.1,hpc-0.5.1.1/hpc.haddock --read-interface=integer-gmp-0.4.0.0,integer-gmp-0.4.0.0/integer-gmp.haddock --read-interface=mtl,mtl/mtl.haddock --read-interface=old-locale-1.0.0.4,old-locale-1.0.0.4/old-locale.haddock --read-interface=old-time-1.1.0.0,old-time-1.1.0.0/old-time.haddock --read-interface=pretty-1.1.1.0,pretty-1.1.1.0/pretty.haddock --read-interface=process-1.1.0.1,process-1.1.0.1/process.haddock --read-interface=syb,syb/syb.haddock --read-interface=template-haskell-2.7.0.0,template-haskell-2.7.0.0/template-haskell.haddock --read-interface=time-1.4,time-1.4/time.haddock --read-interface=transformers,transformers/transformers.haddock --read-interface=unix-2.5.1.0,unix-2.5.1.0/unix.haddock --read-interface=utf8-string,utf8-string/utf8-string.haddock --read-interface=X11,X11/X11.haddock
    [2012-04-10 11:47] upgraded haskell-x11 (1.5.0.1-2 -> 1.5.0.1-3)
    [2012-04-10 11:47] upgraded mpd (0.16.7-3 -> 0.16.8-2)
    [2012-04-10 11:47] upgraded zathura (0.1.1-4 -> 0.1.2-1)
    [2012-04-10 15:58] Running 'pacman-color -Syu'
    [2012-04-10 15:58] synchronizing package lists
    [2012-04-10 15:59] starting full system upgrade
    [2012-04-10 15:59] upgraded vim-runtime (7.3.475-1 -> 7.3.495-1)
    [2012-04-10 15:59] upgraded gvim (7.3.475-1 -> 7.3.495-1)
    [2012-04-10 16:22] Running 'pacman-color -Syu'
    [2012-04-10 16:22] synchronizing package lists
    [2012-04-10 16:22] starting full system upgrade
    [2012-04-11 00:27] Running 'pacman-color -Syu'
    [2012-04-11 00:27] synchronizing package lists
    [2012-04-11 00:27] starting full system upgrade
    [2012-04-11 00:28] upgraded libpciaccess (0.13-1 -> 0.13.1-1)
    [2012-04-11 00:28] upgraded lib32-libpciaccess (0.13-1 -> 0.13.1-1)
    [2012-04-11 00:28] upgraded xorg-server-common (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 00:28] upgraded xorg-server (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 17:24] Running 'pacman-color -Syu'
    [2012-04-11 17:24] synchronizing package lists
    [2012-04-11 17:25] Running 'pacman-color -Syu'
    [2012-04-11 17:25] synchronizing package lists
    [2012-04-11 17:25] Running 'pacman-color -Rns gcc-libs-multilib'
    [2012-04-11 17:25] Running 'pacman-color -Syu gcc-libs'
    [2012-04-11 17:25] synchronizing package lists
    [2012-04-11 17:26] Running 'pacman-color -S pacman'
    [2012-04-11 17:26] upgraded pacman (4.0.2-1 -> 4.0.3-1)
    [2012-04-11 17:26] Running 'pacman-color -Syu'
    [2012-04-11 17:26] synchronizing package lists
    [2012-04-11 17:26] starting full system upgrade
    [2012-04-11 17:26] Users no longer need to be in the 'camera' group to use camera devices
    [2012-04-11 17:26] upgraded libgphoto2 (2.4.13-1 -> 2.4.13-2)
    [2012-04-11 17:26] upgraded ntfs-3g (2012.1.15-1 -> 2012.1.15-2)
    [2012-04-11 17:26] upgraded perl-list-moreutils (0.33-1 -> 0.33-2)
    [2012-04-11 17:26] Updating vim help tags...done.
    [2012-04-11 17:26] upgraded vim-bufexplorer (7.2.8-4 -> 7.2.8-5)
    [2012-04-11 17:26] upgraded vim-colorsamplerpack (8.03-2 -> 8.03-3)
    [2012-04-11 17:26] upgraded vim-doxygentoolkit (0.2.13-1 -> 0.2.13-2)
    [2012-04-11 17:40] Running 'pacman-color -Syu'
    [2012-04-11 17:40] synchronizing package lists
    [2012-04-11 17:40] starting full system upgrade
    [2012-04-11 17:41] Running 'pacman -U /home/jonas/opera-next/opera-next-12.00_1362-1-x86_64.pkg.tar.xz'
    [2012-04-11 17:41] upgraded opera-next (12.00_1359-1 -> 12.00_1362-1)
    [2012-04-11 20:56] Running 'pacman-color -Syu'
    [2012-04-11 20:56] synchronizing package lists
    [2012-04-11 20:56] starting full system upgrade
    [2012-04-11 20:58] upgraded lib32-gcc-libs (4.7.0-3 -> 4.7.0-4)
    [2012-04-11 20:58] upgraded gcc-libs-multilib (4.7.0-3 -> 4.7.0-4)
    [2012-04-11 20:58] upgraded gcc-multilib (4.7.0-3 -> 4.7.0-4)
    [2012-04-11 20:58] upgraded vimpager (1.6.7-1 -> 1.6.8-1)
    [2012-04-11 21:09] Running 'pacman-color -Syu'
    [2012-04-11 21:09] synchronizing package lists
    [2012-04-11 21:09] starting full system upgrade
    [2012-04-11 21:11] Running 'pacman -U /home/jonas/pacman-color-testing/pacman-color-testing-4.0.3-1-x86_64.pkg.tar.xz'
    [2012-04-11 21:11] upgraded pacman-color-testing (4.0.2-1 -> 4.0.3-1)
    [2012-04-12 17:46] Running 'pacman -S --asdeps libqtgtl libpqxx freetds fftw libspnav automoc4 boost cmake eigen pstoedit libwpg create-svn libgsf'
    [2012-04-12 17:46] Running 'pacman -S --asdeps llvm opengtl'
    [2012-04-12 17:47] installed llvm (3.0-2)
    [2012-04-12 17:47] installed opengtl (0.9.16-1)
    [2012-04-12 17:47] Running 'pacman -S --asdeps cmake'
    [2012-04-12 17:48] installed cmake (2.8.7-2)
    [2012-04-12 17:48] Running 'pacman -U /home/jonas/calligra-filters-git/libqtgtl/libqtgtl-0.9.2-1-x86_64.pkg.tar.xz'
    [2012-04-12 18:07] installed libqtgtl (0.9.2-1)
    [2012-04-12 18:07] Running 'pacman -S --asdeps libpqxx freetds fftw libspnav automoc4 boost eigen pstoedit libwpg create-svn libgsf'
    [2012-04-12 18:08] Running 'pacman -U /home/jonas/calligra-filters-git/libspnav/libspnav-0.2.2-2-x86_64.pkg.tar.xz'
    [2012-04-12 18:12] installed libspnav (0.2.2-2)
    [2012-04-12 18:26] Running 'pacman -S --asdeps libpqxx freetds fftw automoc4 boost eigen pstoedit libwpg create-svn libgsf'
    [2012-04-12 18:26] Running 'pacman-color -Syu'
    [2012-04-12 18:26] synchronizing package lists
    [2012-04-12 18:26] starting full system upgrade
    [2012-04-12 18:31] upgraded consolekit (0.4.5-2 -> 0.4.6-1)
    [2012-04-12 18:31] upgraded libwbclient (3.6.3-4 -> 3.6.4-1)
    [2012-04-12 18:31] upgraded mkinitcpio (0.8.6-2 -> 0.8.7-1)
    [2012-04-12 18:31] upgraded smbclient (3.6.3-4 -> 3.6.4-1)
    [2012-04-12 18:31] upgraded transmission-cli (2.50-1 -> 2.51-1)
    [2012-04-12 18:31] upgraded udev (181-9 -> 182-1)
    [2012-04-13 11:31] Running 'pacman-color -D --asdeps libqtgtl libspnav'
    [2012-04-13 11:35] Running 'pacman -S --asdeps sdl_image'
    [2012-04-13 11:35] installed sdl_image (1.2.12-2)
    [2012-04-13 11:38] Running 'pacman -U /home/jonas/flare-rpg/flare-rpg-0.15.1-2-x86_64.pkg.tar.xz'
    [2012-04-13 11:40] installed flare-rpg (0.15.1-2)
    [2012-04-13 13:49] Running 'pacman-color -Syu rtorrent'
    [2012-04-13 13:49] synchronizing package lists
    [2012-04-13 13:49] starting full system upgrade
    [2012-04-13 13:49] installed libtorrent (0.12.9-1)
    [2012-04-13 13:49] installed xmlrpc-c (1:1.29.2-1)
    [2012-04-13 13:49] installed rtorrent (0.8.9-2)
    [2012-04-13 13:49] upgraded consolekit (0.4.6-1 -> 0.4.6-2)
    [2012-04-13 13:49] upgraded flashplugin (11.2.202.228-1 -> 11.2.202.233-1)
    [2012-04-13 13:49] upgraded libmysqlclient (5.5.22-1 -> 5.5.23-1)
    [2012-04-13 13:49] upgraded mysql-clients (5.5.22-1 -> 5.5.23-1)
    [2012-04-13 13:49] upgraded mysql (5.5.22-1 -> 5.5.23-1)
    [2012-04-13 13:51] Running 'pacman-color -Rns rtorrent'
    [2012-04-13 13:51] removed rtorrent (0.8.9-2)
    [2012-04-13 13:51] removed xmlrpc-c (1:1.29.2-1)
    [2012-04-13 13:51] removed libtorrent (0.12.9-1)
    [2012-04-13 13:55] Running 'pacman -U /home/jonas/transmission-gtk2/transmission-gtk2-2.51-1-x86_64.pkg.tar.xz'
    [2012-04-13 13:55] installed transmission-gtk2 (2.51-1)
    [2012-04-13 13:56] Running 'pacman-color -Rns transmission-cli'
    [2012-04-13 13:56] removed transmission-cli (2.51-1)
    [2012-04-13 16:32] Running 'pacman-color -Syu'
    [2012-04-13 16:32] synchronizing package lists
    [2012-04-13 16:32] starting full system upgrade
    [2012-04-13 18:27] Running 'pacman-color -Scc'
    [2012-04-13 18:27] Running 'pacman-color -Sc'
    [2012-04-13 18:32] Running 'pacman-color -Rns 0ad'
    [2012-04-13 18:32] removed 0ad (a9-1)
    [2012-04-13 18:32] removed gamin (0.1.10-6)
    [2012-04-13 18:32] removed enet (1.3.3-2)
    [2012-04-13 18:32] removed 0ad-data (a9-1)
    [2012-04-13 18:32] Running 'pacman-color -Sc'
    [2012-04-14 18:14] Running 'pacman-color -Syu'
    [2012-04-14 18:14] synchronizing package lists
    [2012-04-14 18:14] starting full system upgrade
    [2012-04-14 18:14] upgraded dbus-core (1.4.16-1 -> 1.4.20-2)
    [2012-04-14 18:14] upgraded dbus (1.4.16-1 -> 1.4.20-1)
    [2012-04-14 18:14] upgraded dbus-python (0.84.0-1 -> 1.0.0-1)
    [2012-04-14 18:14] upgraded garcon (0.1.11-1 -> 0.1.12-1)
    [2012-04-14 18:14] upgraded mkinitcpio (0.8.7-1 -> 0.8.7-2)
    [2012-04-14 18:14] upgraded qt (4.8.1-1 -> 4.8.1-2)
    [2012-04-14 18:15] upgraded wine (1.5.1-1 -> 1.5.2-1)
    [2012-04-14 18:15] upgraded xorg-server-common (1.12.0.902-1 -> 1.12.1-1)
    [2012-04-14 18:15] upgraded xorg-server (1.12.0.902-1 -> 1.12.1-1)
    dmesg;
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.3 (GCC) ) #1 SMP PREEMPT Tue Apr 3 06:46:17 UTC 2012
    [ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
    [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 3205 06/07/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000430000000 aka 17152M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
    [ 0.000000] 0000000000 - 00c0000000 page 1G
    [ 0.000000] 00c0000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cfe90000 page 4k
    [ 0.000000] kernel direct mapping tables up to cfe90000 @ 1fffd000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000
    [ 0.000000] 0100000000 - 0400000000 page 1G
    [ 0.000000] 0400000000 - 0430000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 430000000 @ cfe8e000-cfe90000
    [ 0.000000] RAMDISK: 37d2b000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 00000000cfe90000 0003C (v01 060710 RSDT1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 060710 FACP1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120111/tbfadt-579)
    [ 0.000000] ACPI: DSDT 00000000cfe90450 0E856 (v01 A1160 A1160000 00000000 INTL 20060113)
    [ 0.000000] ACPI: FACS 00000000cfea8000 00040
    [ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 060710 APIC1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 060710 OEMMCFG 20100607 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 060710 OEMB1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI: SRAT 00000000cfe9f450 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
    [ 0.000000] ACPI: HPET 00000000cfe9f540 00038 (v01 060710 OEMHPET 20100607 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
    [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
    [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
    [ 0.000000] SRAT: Node 0 PXM 0 100000000-430000000
    [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
    [ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,430000000) -> [0,430000000)
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000430000000
    [ 0.000000] NODE_DATA [000000042fffb000 - 000000042fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00430000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000cfe90
    [ 0.000000] 0: 0x00100000 -> 0x00430000
    [ 0.000000] On node 0 totalpages: 4193823
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831184 pages, LIFO batch:31
    [ 0.000000] Normal zone: 52224 pages used for memmap
    [ 0.000000] Normal zone: 3290112 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
    [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
    [ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
    [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042fc00000 s82176 r8192 d24320 u262144
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125210
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-label/archroot ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 16366888k/17563648k available (4507k kernel code, 788356k absent, 408404k reserved, 4315k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:728 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3210.762 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6424.08 BogoMIPS (lpj=10702540)
    [ 0.003340] pid_max: default: 32768 minimum: 301
    [ 0.003356] Security Framework initialized
    [ 0.003360] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004359] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.009978] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.011818] Mount-cache hash table entries: 256
    [ 0.011918] Initializing cgroup subsys cpuacct
    [ 0.011920] Initializing cgroup subsys memory
    [ 0.011926] Initializing cgroup subsys devices
    [ 0.011928] Initializing cgroup subsys freezer
    [ 0.011929] Initializing cgroup subsys net_cls
    [ 0.011931] Initializing cgroup subsys blkio
    [ 0.011952] tseg: 0000000000
    [ 0.011963] CPU: Physical Processor ID: 0
    [ 0.011964] CPU: Processor Core ID: 0
    [ 0.011966] mce: CPU supports 6 MCE banks
    [ 0.012513] ACPI: Core revision 20120111
    [ 0.016673] ftrace: allocating 17413 entries in 69 pages
    [ 0.023719] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058830] CPU0: AMD Phenom(tm) II X4 840 Processor stepping 03
    [ 0.059996] Performance Events: AMD PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 48
    [ 0.059996] ... generic registers: 4
    [ 0.059996] ... value mask: 0000ffffffffffff
    [ 0.059996] ... max period: 00007fffffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000000000f
    [ 0.076711] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.103360] Booting Node 0, Processors #1
    [ 0.103363] smpboot cpu 1: start_ip = 9a000
    [ 0.116684] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.136704] #2
    [ 0.136706] smpboot cpu 2: start_ip = 9a000
    [ 0.150015] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.170030] #3
    [ 0.170032] smpboot cpu 3: start_ip = 9a000
    [ 0.183357] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.190007] Brought up 4 CPUs
    [ 0.190010] Total of 4 processors activated (25696.35 BogoMIPS).
    [ 0.190521] devtmpfs: initialized
    [ 0.191849] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
    [ 0.191849] NET: Registered protocol family 16
    [ 0.191849] node 0 link 0: io port [1000, ffffff]
    [ 0.191849] TOM: 00000000d0000000 aka 3328M
    [ 0.191849] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    [ 0.191849] node 0 link 0: mmio [e0000000, efffffff] ==> none
    [ 0.191849] node 0 link 0: mmio [f0000000, ffffffff]
    [ 0.191849] node 0 link 0: mmio [a0000, bffff]
    [ 0.191849] node 0 link 0: mmio [d0000000, dfffffff]
    [ 0.191849] TOM2: 0000000430000000 aka 17152M
    [ 0.191849] bus: [00, 07] on node 0 link 0
    [ 0.191849] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.191849] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
    [ 0.191849] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
    [ 0.191849] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
    [ 0.191849] bus: 00 index 4 [mem 0x430000000-0xfcffffffff]
    [ 0.191849] ACPI: bus type pci registered
    [ 0.191849] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.191849] PCI: not using MMCONFIG
    [ 0.191849] PCI: Using configuration type 1 for base access
    [ 0.191849] PCI: Using configuration type 1 for extended access
    [ 0.191849] mtrr: your CPUs had inconsistent fixed MTRR settings
    [ 0.191849] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.191849] mtrr: corrected configuration.
    [ 0.193356] bio: create slab <bio-0> at 0
    [ 0.193359] ACPI: Added _OSI(Module Device)
    [ 0.193359] ACPI: Added _OSI(Processor Device)
    [ 0.193359] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.193359] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.194088] ACPI: EC: Look up EC in DSDT
    [ 0.195267] ACPI: Executed 3 blocks of module-level executable AML code
    [ 0.263709] ACPI: Interpreter enabled
    [ 0.263714] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.263732] ACPI: Using IOAPIC for interrupt routing
    [ 0.263752] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.264484] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.284239] ACPI: No dock devices found.
    [ 0.284239] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.284239] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.284239] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.284239] PCI host bridge to bus 0000:00
    [ 0.284239] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.284239] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.284246] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
    [ 0.284258] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.284295] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.284329] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.284346] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
    [ 0.284380] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.284393] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
    [ 0.284426] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.284455] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [ 0.284474] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
    [ 0.284484] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
    [ 0.284493] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
    [ 0.284502] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
    [ 0.284512] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
    [ 0.284521] pci 0000:00:11.0: reg 24: [mem 0xfbcfe400-0xfbcfe7ff]
    [ 0.284541] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.284589] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [ 0.284602] pci 0000:00:12.0: reg 10: [mem 0xfbcf6000-0xfbcf6fff]
    [ 0.284667] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
    [ 0.284680] pci 0000:00:12.1: reg 10: [mem 0xfbcf7000-0xfbcf7fff]
    [ 0.284750] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [ 0.284769] pci 0000:00:12.2: reg 10: [mem 0xfbcfe800-0xfbcfe8ff]
    [ 0.284853] pci 0000:00:12.2: supports D1 D2
    [ 0.284854] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.284878] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [ 0.284891] pci 0000:00:13.0: reg 10: [mem 0xfbcfc000-0xfbcfcfff]
    [ 0.284956] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
    [ 0.284969] pci 0000:00:13.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
    [ 0.285039] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [ 0.285058] pci 0000:00:13.2: reg 10: [mem 0xfbcfec00-0xfbcfecff]
    [ 0.285142] pci 0000:00:13.2: supports D1 D2
    [ 0.285143] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.285169] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.286657] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [ 0.286673] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.286682] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.286691] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.286701] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.286710] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
    [ 0.286768] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.286789] pci 0000:00:14.2: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit]
    [ 0.286856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.286871] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [ 0.286948] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.286990] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [ 0.287003] pci 0000:00:14.5: reg 10: [mem 0xfbcff000-0xfbcfffff]
    [ 0.287071] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [ 0.287088] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [ 0.287101] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [ 0.287115] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [ 0.287132] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [ 0.287184] pci 0000:04:00.0: [1002:6739] type 0 class 0x000300
    [ 0.287198] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.287209] pci 0000:04:00.0: reg 18: [mem 0xfbfc0000-0xfbfdffff 64bit]
    [ 0.287216] pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
    [ 0.287230] pci 0000:04:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref]
    [ 0.287263] pci 0000:04:00.0: supports D1 D2
    [ 0.287285] pci 0000:04:00.1: [1002:aa88] type 0 class 0x000403
    [ 0.287299] pci 0000:04:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
    [ 0.287363] pci 0000:04:00.1: supports D1 D2
    [ 0.293342] pci 0000:00:02.0: PCI bridge to [bus 04-04]
    [ 0.293347] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.293350] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.293353] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.293404] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.293419] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
    [ 0.293443] pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
    [ 0.293470] pci 0000:03:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
    [ 0.293533] pci 0000:03:00.0: supports D1 D2
    [ 0.293535] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.293557] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.293564] pci 0000:00:06.0: PCI bridge to [bus 03-03]
    [ 0.293567] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
    [ 0.293569] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.293618] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [ 0.293647] pci 0000:02:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit]
    [ 0.293662] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
    [ 0.293790] pci 0000:02:00.0: supports D2
    [ 0.293792] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [ 0.300012] pci 0000:00:07.0: PCI bridge to [bus 02-02]
    [ 0.300017] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
    [ 0.300019] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.300085] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
    [ 0.300095] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.300096] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.300098] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.300100] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.300101] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
    [ 0.300103] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.300119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.300256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.300277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    [ 0.300294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
    [ 0.300325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 0.300363] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.300365] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.300366] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.303051] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
    [ 0.303079] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
    [ 0.303104] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
    [ 0.303127] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
    [ 0.303151] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [ 0.303175] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [ 0.303200] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
    [ 0.303224] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [ 0.303334] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.303336] vgaarb: loaded
    [ 0.303337] vgaarb: bridge control possible 0000:04:00.0
    [ 0.303372] PCI: Using ACPI for IRQ routing
    [ 0.312318] PCI: pci_cache_line_size set to 64 bytes
    [ 0.312324] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.312393] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.312395] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
    [ 0.312472] NetLabel: Initializing
    [ 0.312473] NetLabel: domain hash size = 128
    [ 0.312474] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.312483] NetLabel: unlabeled traffic allowed by default
    [ 0.312491] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.312493] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.314334] Switching to clocksource hpet
    [ 0.317535] pnp: PnP ACPI init
    [ 0.317549] ACPI: bus type pnp registered
    [ 0.317637] pnp 00:00: [bus 00-ff]
    [ 0.317639] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.317640] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.317641] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.317643] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.317644] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.317646] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
    [ 0.317649] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.317689] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.317713] pnp 00:01: [dma 4]
    [ 0.317714] pnp 00:01: [io 0x0000-0x000f]
    [ 0.317716] pnp 00:01: [io 0x0081-0x0083]
    [ 0.317717] pnp 00:01: [io 0x0087]
    [ 0.317718] pnp 00:01: [io 0x0089-0x008b]
    [ 0.317719] pnp 00:01: [io 0x008f]
    [ 0.317720] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.317739] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.317745] pnp 00:02: [io 0x0070-0x0071]
    [ 0.317753] pnp 00:02: [irq 8]
    [ 0.317770] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.317774] pnp 00:03: [io 0x0061]
    [ 0.317791] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.317797] pnp 00:04: [io 0x00f0-0x00ff]
    [ 0.317800] pnp 00:04: [irq 13]
    [ 0.317818] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.317846] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 0.317864] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.317910] pnp 00:06: [io 0x0060]
    [ 0.317911] pnp 00:06: [io 0x0064]
    [ 0.317913] pnp 00:06: [mem 0xfec00000-0xfec00fff]
    [ 0.317914] pnp 00:06: [mem 0xfee00000-0xfee00fff]
    [ 0.317955] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.317957] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.317959] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.318069] pnp 00:07: [io 0x0010-0x001f]
    [ 0.318071] pnp 00:07: [io 0x0022-0x003f]
    [ 0.318072] pnp 00:07: [io 0x0062-0x0063]
    [ 0.318073] pnp 00:07: [io 0x0065-0x006f]
    [ 0.318074] pnp 00:07: [io 0x0072-0x007f]
    [ 0.318075] pnp 00:07: [io 0x0080]
    [ 0.318077] pnp 00:07: [io 0x0084-0x0086]
    [ 0.318078] pnp 00:07: [io 0x0088]
    [ 0.318079] pnp 00:07: [io 0x008c-0x008e]
    [ 0.318080] pnp 00:07: [io 0x0090-0x009f]
    [ 0.318081] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.318082] pnp 00:07: [io 0x00b1]
    [ 0.318084] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.318085] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.318086] pnp 00:07: [io 0x040b]
    [ 0.318087] pnp 00:07: [io 0x04d6]
    [ 0.318088] pnp 00:07: [io 0x0c00-0x0c01]
    [ 0.318089] pnp 00:07: [io 0x0c14]
    [ 0.318090] pnp 00:07: [io 0x0c50-0x0c51]
    [ 0.318092] pnp 00:07: [io 0x0c52]
    [ 0.318093] pnp 00:07: [io 0x0c6c]
    [ 0.318094] pnp 00:07: [io 0x0c6f]
    [ 0.318095] pnp 00:07: [io 0x0cd0-0x0cd1]
    [ 0.318096] pnp 00:07: [io 0x0cd2-0x0cd3]
    [ 0.318099] pnp 00:07: [io 0x0cd4-0x0cd5]
    [ 0.318100] pnp 00:07: [io 0x0cd6-0x0cd7]
    [ 0.318101] pnp 00:07: [io 0x0cd8-0x0cdf]
    [ 0.318102] pnp 00:07: [io 0x0b00-0x0b3f]
    [ 0.318103] pnp 00:07: [io 0x0800-0x089f]
    [ 0.318105] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.318106] pnp 00:07: [io 0x0b00-0x0b0f]
    [ 0.318107] pnp 00:07: [io 0x0b20-0x0b3f]
    [ 0.318108] pnp 00:07: [io 0x0900-0x090f]
    [ 0.318110] pnp 00:07: [io 0x0910-0x091f]
    [ 0.318111] pnp 00:07: [io 0xfe00-0xfefe]
    [ 0.318112] pnp 00:07: [io 0x0060]
    [ 0.318113] pnp 00:07: [io 0x0064]
    [ 0.318114] pnp 00:07: [mem 0xcff00000-0xcfffffff]
    [ 0.318116] pnp 00:07: [mem 0xffb80000-0xffbfffff]
    [ 0.318117] pnp 00:07: [mem 0xfec10000-0xfec1001f]
    [ 0.318176] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.318178] system 00:07: [io 0x040b] has been reserved
    [ 0.318179] system 00:07: [io 0x04d6] has been reserved
    [ 0.318181] system 00:07: [io 0x0c00-0x0c01] has been reserved
    [ 0.318183] system 00:07: [io 0x0c14] has been reserved
    [ 0.318184] system 00:07: [io 0x0c50-0x0c51] has been reserved
    [ 0.318186] system 00:07: [io 0x0c52] has been reserved
    [ 0.318187] system 00:07: [io 0x0c6c] has been reserved
    [ 0.318189] system 00:07: [io 0x0c6f] has been reserved
    [ 0.318190] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.318192] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.318194] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.318195] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.318197] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.318199] system 00:07: [io 0x0b00-0x0b3f] has been reserved
    [ 0.318200] system 00:07: [io 0x0800-0x089f] has been reserved
    [ 0.318202] system 00:07: [io 0x0b00-0x0b0f] has been reserved
    [ 0.318204] system 00:07: [io 0x0b20-0x0b3f] has been reserved
    [ 0.318205] system 00:07: [io 0x0900-0x090f] has been reserved
    [ 0.318207] system 00:07: [io 0x0910-0x091f] has been reserved
    [ 0.318209] system 00:07: [io 0xfe00-0xfefe] has been reserved
    [ 0.318211] system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved
    [ 0.318213] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
    [ 0.318214] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.318217] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.318531] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.318535] pnp 00:08: [irq 4]
    [ 0.318536] pnp 00:08: [dma 0 disabled]
    [ 0.318598] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.318929] pnp 00:09: [io 0x03f0-0x03f5]
    [ 0.318930] pnp 00:09: [io 0x03f7]
    [ 0.318933] pnp 00:09: [irq 6]
    [ 0.318934] pnp 00:09: [dma 2]
    [ 0.318969] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.319088] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.319090] pnp 00:0a: [io 0x0230-0x023f]
    [ 0.319091] pnp 00:0a: [io 0x0290-0x029f]
    [ 0.319092] pnp 00:0a: [io 0x0f40-0x0f4f]
    [ 0.319093] pnp 00:0a: [io 0x0a30-0x0a3f]
    [ 0.319126] system 00:0a: [io 0x0230-0x023f] has been reserved
    [ 0.319127] system 00:0a: [io 0x0290-0x029f] has been reserved
    [ 0.319129] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
    [ 0.319131] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
    [ 0.319133] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.319154] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.319183] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.319185] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.319881] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.319883] pnp 00:0c: [mem 0x000c0000-0x000cffff]
    [ 0.319885] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    [ 0.319886] pnp 00:0c: [mem 0x00100000-0xcfefffff]
    [ 0.319887] pnp 00:0c: [mem 0xfec00000-0xffffffff]
    [ 0.319893] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319896] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319899] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319901] pnp 00:0c: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319973] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
    [ 0.319976] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.320068] pnp: PnP ACPI: found 13 devices
    [ 0.320069] ACPI: ACPI bus type pnp unregistered
    [ 0.326686] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.326706] pci 0000:00:02.0: PCI bridge to [bus 04-04]
    [ 0.326709] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.326711] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.326714] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.326717] pci 0000:00:06.0: PCI bridge to [bus 03-03]
    [ 0.326719] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
    [ 0.326722] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.326725] pci 0000:00:07.0: PCI bridge to [bus 02-02]
    [ 0.326727] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
    [ 0.326730] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.326733] pci 0000:00:14.4: PCI bridge to [bus 01-01]
    [ 0.326770] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.326772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.326773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.326775] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.326776] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
    [ 0.326778] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.326779] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.326781] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
    [ 0.326783] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.326784] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.326786] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
    [ 0.326788] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.326789] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
    [ 0.326791] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    [ 0.326792] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    [ 0.326794] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.326795] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.326797] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
    [ 0.326799] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.326829] NET: Registered protocol family 2
    [ 0.327110] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.328540] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.330488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.330723] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.330725] TCP reno registered
    [ 0.330745] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.330836] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.330971] NET: Registered protocol family 1
    [ 0.756738] pci 0000:04:00.0: Boot video device
    [ 0.756749] PCI: CLS 64 bytes, default 64
    [ 0.756788] Unpacking initramfs...
    [ 0.798057] Freeing initrd memory: 2836k freed
    [ 0.800187] PCI-DMA: Disabling AGP.
    [ 0.800278] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.800280] PCI-DMA: using GART IOMMU.
    [ 0.800282] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.802774] IBS: LVT offset 1 assigned
    [ 0.802804] perf: AMD IBS detected (0x0000001f)
    [ 0.802963] audit: initializing netlink socket (disabled)
    [ 0.802978] type=2000 audit(1334050141.799:1): initialized
    [ 0.803936] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.806526] VFS: Disk quotas dquot_6.5.2
    [ 0.806569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.806635] msgmni has been set to 32100
    [ 0.806971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.807061] io scheduler noop registered
    [ 0.807064] io scheduler deadline registered
    [ 0.807124] io scheduler cfq registered (default)
    [ 0.807339] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.807533] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
    [ 0.807750] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
    [ 0.807957] GHES: HEST is not enabled!
    [ 0.808045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.828667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.849559] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.849760] Linux agpgart interface v0.103
    [ 0.849805] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.850193] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.850234] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.850352] mousedev: PS/2 mouse device common for all mice
    [ 0.850406] rtc_cmos 00:02: RTC can wake from S4
    [ 0.850557] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.850580] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.850589] cpuidle: using governor ladder
    [ 0.850590] cpuidle: using governor menu
    [ 0.850724] TCP cubic registered
    [ 0.850812] NET: Registered protocol family 10
    [ 0.851112] NET: Registered protocol family 17
    [ 0.851114] Registering the dns_resolver key type
    [ 0.851253] PM: Hibernation image not present or could not be loaded.
    [ 0.851260] registered taskstats version 1
    [ 0.852170] rtc_cmos 00:02: setting system clock to 2012-04-10 09:29:02 UTC (1334050142)
    [ 0.852195] Initializing network drop monitor service
    [ 0.853114] Freeing unused kernel memory: 732k freed
    [ 0.853269] Write protecting the kernel read-only data: 8192k
    [ 0.857266] Freeing unused kernel memory: 1620k freed
    [ 0.859285] Freeing unused kernel memory: 660k freed
    [ 0.867016] udevd[74]: starting version 181
    [ 0.889751] SCSI subsystem initialized
    [ 0.890757] usbcore: registered new interface driver usbfs
    [ 0.890779] usbcore: registered new interface driver hub
    [ 0.891269] usbcore: registered new device driver usb
    [ 0.892313] libata version 3.00 loaded.
    [ 0.892491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.892633] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.892672] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.892682] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.892712] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.892736] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcfe800
    [ 0.894588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.900033] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.900335] hub 1-0:1.0: USB hub found
    [ 0.900340] hub 1-0:1.0: 6 ports detected
    [ 0.900579] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.900591] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.900599] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.900621] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.900645] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfec00
    [ 0.910028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.910295] hub 2-0:1.0: USB hub found
    [ 0.910299] hub 2-0:1.0: 6 ports detected
    [ 0.910565] ahci 0000:00:11.0: version 3.0
    [ 0.910649] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
    [ 0.910748] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.910751] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
    [ 0.913392] scsi0 : ahci
    [ 0.913744] scsi1 : ahci
    [ 0.913950] scsi2 : ahci
    [ 0.914322] scsi3 : ahci
    [ 0.914729] ata1: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe500 irq 43
    [ 0.914733] ata2: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe580 irq 43
    [ 0.914736] ata3: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe600 irq 43
    [ 0.914739] ata4: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe680 irq 43
    [ 0.915322] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.915334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.915365] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcf6000
    [ 0.970892] hub 3-0:1.0: USB hub found
    [ 0.970899] hub 3-0:1.0: 3 ports detected
    [ 0.971078] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 0.971089] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 0.971107] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcf7000
    [ 1.027554] hub 4-0:1.0: USB hub found
    [ 1.027561] hub 4-0:1.0: 3 ports detected
    [ 1.027748] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.027757] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.027782] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
    [ 1.084224] hub 5-0:1.0: USB hub found
    [ 1.084230] hub 5-0:1.0: 3 ports detected
    [ 1.084422] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.084430] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.084446] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfd000
    [ 1.140874] hub 6-0:1.0: USB hub found
    [ 1.140880] hub 6-0:1.0: 3 ports detected
    [ 1.141059] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.141069] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.141087] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcff000
    [ 1.197575] hub 7-0:1.0: USB hub found
    [ 1.197581] hub 7-0:1.0: 2 ports detected
    [ 1.233428] ata1: SATA link down (SStatus 0 SControl 300)
    [ 1.233482] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.233530] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.233597] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.234129] pata_atiixp 0000:00:14.1: setting latency timer to 64
    [ 1.236194] scsi4 : pata_atiixp
    [ 1.236384] scsi5 : pata_atiixp
    [ 1.236884] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [ 1.236886] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [ 1.408804] ata5.00: ATA-7: GENERIC, BAJ41G20, max UDMA/133
    [ 1.408807] ata5.00: 398297088 sectors, multi 16: LBA48
    [ 1.422031] ata5.00: configured for UDMA/100
    [ 1.422229] scsi 4:0:0:0: Direct-Access ATA GENERIC BAJ4 PQ: 0 ANSI: 5
    [ 1.424626] sd 4:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
    [ 1.424739] sd 4:0:0:0: [sda] Write Protect is off
    [ 1.424741] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.424759] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.487336] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    [ 1.488267] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 1.510062] usb 3-3: new low-speed USB device number 2 using ohci_hcd
    [ 1.677918] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
    [ 1.678062] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-3/input0
    [ 1.678078] usbcore: registered new interface driver usbhid
    [ 1.678079] usbhid: USB HID core driver
    [ 1.776721] usb 2-6: new high-speed USB device number 2 using ehci_hcd
    [ 1.803379] Refined TSC clocksource calibration: 3210.938 MHz.
    [ 1.803389] Switching to clocksource tsc
    [ 2.366725] usb 4-1: new full-speed USB device number 2 using ohci_hcd
    [ 2.415746] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.530590] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
    [ 2.530660] generic-usb 0003:24AE:2000.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:12.1-1/input0
    [ 2.536738] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input2
    [ 2.536864] generic-usb 0003:24AE:2000.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:12.1-1/input1
    [ 4.045730] udevd[189]: starting version 181
    [ 5.247350] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 5.247408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 5.254193] EDAC MC: Ver: 2.1.0
    [ 5.347684] Linux media interface: v0.10
    [ 5.401241] MCE: In-kernel MCE decoding enabled.
    [ 5.406762] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [ 5.410134] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 5.410236] ACPI: Power Button [PWRB]
    [ 5.410305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.410331] ACPI: Power Button [PWRF]
    [ 5.423440] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.427224] wmi: Mapper loaded
    [ 5.442807] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 5.442941] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 5.443253] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9001269c000, 20:cf:30:19:3e:02, XID 18000000 IRQ 44
    [ 5.443255] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [ 5.465393] AMD64 EDAC driver v3.4.0
    [ 5.465442] Floppy drive(s): fd0 is 1.44M
    [ 5.465464] EDAC amd64: DRAM ECC disabled.
    [ 5.466318] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module wil

    Hm, dis- and reconnecting the graphics card solved the problem. Did this because I figured a hardware problem after freezes in three different live systems.
    Last edited by null (2012-04-15 11:32:41)

  • [SOLVED] Getting freezes after using dwm for some time and exiting it

    Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
    Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
    This is my /var/log/Xorg.0.log
    [ 7.573]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 7.573] X Protocol Version 11, Revision 0
    [ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
    [ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
    [ 7.574] Build Date: 01 July 2013 10:48:42AM
    [ 7.574]
    [ 7.574] Current version of pixman: 0.30.0
    [ 7.574] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
    [ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 7.575] (==) No Layout section. Using the first Screen section.
    [ 7.575] (==) No screen section available. Using defaults.
    [ 7.575] (**) |-->Screen "Default Screen Section" (0)
    [ 7.575] (**) | |-->Monitor "<default monitor>"
    [ 7.575] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 7.575] (==) Automatically adding devices
    [ 7.575] (==) Automatically enabling devices
    [ 7.575] (==) Automatically adding GPU devices
    [ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 7.578] Entry deleted from font path.
    [ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 7.578] Entry deleted from font path.
    [ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 7.578] Entry deleted from font path.
    [ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 7.578] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 7.578] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 7.578] (II) Loader magic: 0x7fdc20
    [ 7.578] (II) Module ABI versions:
    [ 7.578] X.Org ANSI C Emulation: 0.4
    [ 7.578] X.Org Video Driver: 14.1
    [ 7.578] X.Org XInput driver : 19.1
    [ 7.578] X.Org Server Extension : 7.0
    [ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 7.580] Initializing built-in extension Generic Event Extension
    [ 7.580] Initializing built-in extension SHAPE
    [ 7.580] Initializing built-in extension MIT-SHM
    [ 7.580] Initializing built-in extension XInputExtension
    [ 7.580] Initializing built-in extension XTEST
    [ 7.580] Initializing built-in extension BIG-REQUESTS
    [ 7.580] Initializing built-in extension SYNC
    [ 7.580] Initializing built-in extension XKEYBOARD
    [ 7.580] Initializing built-in extension XC-MISC
    [ 7.580] Initializing built-in extension SECURITY
    [ 7.580] Initializing built-in extension XINERAMA
    [ 7.580] Initializing built-in extension XFIXES
    [ 7.580] Initializing built-in extension RENDER
    [ 7.581] Initializing built-in extension RANDR
    [ 7.581] Initializing built-in extension COMPOSITE
    [ 7.581] Initializing built-in extension DAMAGE
    [ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
    [ 7.581] Initializing built-in extension DOUBLE-BUFFER
    [ 7.581] Initializing built-in extension RECORD
    [ 7.581] Initializing built-in extension DPMS
    [ 7.581] Initializing built-in extension X-Resource
    [ 7.581] Initializing built-in extension XVideo
    [ 7.581] Initializing built-in extension XVideo-MotionCompensation
    [ 7.582] Initializing built-in extension XFree86-VidModeExtension
    [ 7.583] Initializing built-in extension XFree86-DGA
    [ 7.583] Initializing built-in extension XFree86-DRI
    [ 7.584] Initializing built-in extension DRI2
    [ 7.584] (II) LoadModule: "glx"
    [ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 7.586] (II) Module glx: vendor="X.Org Foundation"
    [ 7.586] compiled for 1.14.2, module version = 1.0.0
    [ 7.586] ABI class: X.Org Server Extension, version 7.0
    [ 7.586] (==) AIGLX enabled
    [ 7.587] Loading extension GLX
    [ 7.587] (==) Matched intel as autoconfigured driver 0
    [ 7.587] (==) Matched nouveau as autoconfigured driver 1
    [ 7.587] (==) Matched nvidia as autoconfigured driver 2
    [ 7.587] (==) Matched nv as autoconfigured driver 3
    [ 7.587] (==) Matched intel as autoconfigured driver 4
    [ 7.587] (==) Matched vesa as autoconfigured driver 5
    [ 7.587] (==) Matched modesetting as autoconfigured driver 6
    [ 7.587] (==) Matched fbdev as autoconfigured driver 7
    [ 7.587] (==) Assigned the driver to the xf86ConfigLayout
    [ 7.587] (II) LoadModule: "intel"
    [ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 7.592] (II) Module intel: vendor="X.Org Foundation"
    [ 7.592] compiled for 1.14.2, module version = 2.21.12
    [ 7.592] Module class: X.Org Video Driver
    [ 7.592] ABI class: X.Org Video Driver, version 14.1
    [ 7.592] (II) LoadModule: "nouveau"
    [ 7.592] (WW) Warning, couldn't open module nouveau
    [ 7.592] (II) UnloadModule: "nouveau"
    [ 7.592] (II) Unloading nouveau
    [ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "nvidia"
    [ 7.592] (WW) Warning, couldn't open module nvidia
    [ 7.592] (II) UnloadModule: "nvidia"
    [ 7.592] (II) Unloading nvidia
    [ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "nv"
    [ 7.592] (WW) Warning, couldn't open module nv
    [ 7.592] (II) UnloadModule: "nv"
    [ 7.592] (II) Unloading nv
    [ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 7.592] (II) LoadModule: "vesa"
    [ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 7.593] (II) Module vesa: vendor="X.Org Foundation"
    [ 7.593] compiled for 1.14.0, module version = 2.3.2
    [ 7.593] Module class: X.Org Video Driver
    [ 7.593] ABI class: X.Org Video Driver, version 14.1
    [ 7.593] (II) LoadModule: "modesetting"
    [ 7.593] (WW) Warning, couldn't open module modesetting
    [ 7.593] (II) UnloadModule: "modesetting"
    [ 7.593] (II) Unloading modesetting
    [ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 7.593] (II) LoadModule: "fbdev"
    [ 7.593] (WW) Warning, couldn't open module fbdev
    [ 7.593] (II) UnloadModule: "fbdev"
    [ 7.593] (II) Unloading fbdev
    [ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
    Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
    Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
    Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
    HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
    HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
    Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
    Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
    Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
    HD Graphics 4600, Iris(TM) Pro Graphics 5200,
    Haswell CRW Server (GT1), Haswell CRW Server (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
    Iris(TM) Pro Graphics 5200, ValleyView PO board
    [ 7.594] (II) VESA: driver for VESA chipsets: vesa
    [ 7.594] (++) using VT number 1
    [ 7.594] (WW) Falling back to old probe method for vesa
    [ 7.594] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 7.594] (==) intel(0): RGB weight 888
    [ 7.594] (==) intel(0): Default visual is TrueColor
    [ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 7.594] (**) intel(0): Relaxed fencing enabled
    [ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
    [ 7.594] (**) intel(0): Triple buffering? enabled
    [ 7.594] (**) intel(0): Framebuffer tiled
    [ 7.594] (**) intel(0): Pixmaps tiled
    [ 7.594] (**) intel(0): 3D buffers tiled
    [ 7.594] (**) intel(0): SwapBuffers wait enabled
    [ 7.594] (==) intel(0): video overlay key set to 0x101fe
    [ 7.594] (II) intel(0): Output eDP1 has no monitor section
    [ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
    [ 7.596] (II) intel(0): Output VGA1 has no monitor section
    [ 7.596] (II) intel(0): EDID for output eDP1
    [ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
    [ 7.596] (II) intel(0): Year: 2012 Week: 0
    [ 7.596] (II) intel(0): EDID Version: 1.4
    [ 7.596] (II) intel(0): Digital Display Input
    [ 7.596] (II) intel(0): 6 bits per channel
    [ 7.596] (II) intel(0): Digital interface is DisplayPort
    [ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 7.596] (II) intel(0): Gamma: 2.20
    [ 7.596] (II) intel(0): No DPMS capabilities specified
    [ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 7.596] (II) intel(0): First detailed timing is preferred mode
    [ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
    [ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
    [ 7.596] (II) intel(0): Manufacturer's mask: 0
    [ 7.596] (II) intel(0): Supported detailed timing:
    [ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
    [ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
    [ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
    [ 7.596] (II) intel(0): LG Display
    [ 7.596] (II) intel(0): LP156WF4-SPB1
    [ 7.596] (II) intel(0): EDID (in hex):
    [ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
    [ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
    [ 7.596] (II) intel(0): 1c505400000001010101010101010101
    [ 7.596] (II) intel(0): 010101010101e83580a8703816402024
    [ 7.596] (II) intel(0): 550059c2100000180000000000000000
    [ 7.596] (II) intel(0): 00000000000000000000000000fe004c
    [ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 7.596] (II) intel(0): 004c503135365746342d535042310069
    [ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 7.597] (II) intel(0): Printing probed modes for output eDP1
    [ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
    [ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 7.598] (II) intel(0): EDID for output VGA1
    [ 7.598] (II) intel(0): Output eDP1 connected
    [ 7.598] (II) intel(0): Output VGA1 disconnected
    [ 7.598] (II) intel(0): Using exact sizes for initial modes
    [ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
    [ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
    [ 7.598] (==) intel(0): DPI set to (96, 96)
    [ 7.598] (II) Loading sub module "fb"
    [ 7.598] (II) LoadModule: "fb"
    [ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 7.599] (II) Module fb: vendor="X.Org Foundation"
    [ 7.599] compiled for 1.14.2, module version = 1.0.0
    [ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 7.599] (II) Loading sub module "dri2"
    [ 7.599] (II) LoadModule: "dri2"
    [ 7.599] (II) Module "dri2" already built-in
    [ 7.599] (II) UnloadModule: "vesa"
    [ 7.599] (II) Unloading vesa
    [ 7.599] (==) Depth 24 pixmap format is 32 bpp
    [ 7.599] (II) intel(0): [DRI2] Setup complete
    [ 7.599] (II) intel(0): [DRI2] DRI driver: i965
    [ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
    [ 7.599] (II) UXA(0): Driver registered support for the following operations:
    [ 7.599] (II) solid
    [ 7.599] (II) copy
    [ 7.599] (II) composite (RENDER acceleration)
    [ 7.599] (II) put_image
    [ 7.599] (II) get_image
    [ 7.599] (==) intel(0): Backing store disabled
    [ 7.599] (==) intel(0): Silken mouse enabled
    [ 7.600] (II) intel(0): Initializing HW Cursor
    [ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 7.600] (==) intel(0): DPMS enabled
    [ 7.600] (==) intel(0): Intel XvMC decoder enabled
    [ 7.600] (II) intel(0): Set up textured video
    [ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
    [ 7.600] (==) intel(0): hotplug detection: "enabled"
    [ 7.613] (--) RandR disabled
    [ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
    [ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 7.634] (II) AIGLX: Loaded and initialized i965
    [ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
    [ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.669] (II) LoadModule: "evdev"
    [ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 7.670] (II) Module evdev: vendor="X.Org Foundation"
    [ 7.670] compiled for 1.14.2, module version = 2.8.1
    [ 7.670] Module class: X.Org XInput Driver
    [ 7.670] ABI class: X.Org XInput driver, version 19.1
    [ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.670] (**) Video Bus: always reports core events
    [ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.670] (--) evdev: Video Bus: Found keys
    [ 7.670] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
    [ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 7.670] (**) Option "xkb_rules" "evdev"
    [ 7.670] (**) Option "xkb_model" "pc104"
    [ 7.670] (**) Option "xkb_layout" "us"
    [ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
    [ 7.684] (**) Video Bus: always reports core events
    [ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
    [ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 7.684] (--) evdev: Video Bus: Found keys
    [ 7.684] (II) evdev: Video Bus: Configuring as keyboard
    [ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
    [ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 7.684] (**) Option "xkb_rules" "evdev"
    [ 7.684] (**) Option "xkb_model" "pc104"
    [ 7.684] (**) Option "xkb_layout" "us"
    [ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 7.685] (II) Using input driver 'evdev' for 'Power Button'
    [ 7.685] (**) Power Button: always reports core events
    [ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 7.685] (--) evdev: Power Button: Found keys
    [ 7.685] (II) evdev: Power Button: Configuring as keyboard
    [ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 7.685] (**) Option "xkb_rules" "evdev"
    [ 7.685] (**) Option "xkb_model" "pc104"
    [ 7.685] (**) Option "xkb_layout" "us"
    [ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 7.685] (II) No input driver specified, ignoring this device.
    [ 7.685] (II) This device may have been added with another device file.
    [ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 7.685] (**) Sleep Button: always reports core events
    [ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 7.685] (--) evdev: Sleep Button: Found keys
    [ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
    [ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 7.685] (**) Option "xkb_rules" "evdev"
    [ 7.685] (**) Option "xkb_model" "pc104"
    [ 7.685] (**) Option "xkb_layout" "us"
    [ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
    [ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
    [ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
    [ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
    [ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
    [ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
    [ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
    [ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
    [ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
    [ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
    [ 7.686] (**) Option "xkb_rules" "evdev"
    [ 7.686] (**) Option "xkb_model" "pc104"
    [ 7.686] (**) Option "xkb_layout" "us"
    [ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 7.686] (II) No input driver specified, ignoring this device.
    [ 7.686] (II) This device may have been added with another device file.
    [ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
    [ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 7.686] (**) Option "xkb_rules" "evdev"
    [ 7.686] (**) Option "xkb_model" "pc104"
    [ 7.686] (**) Option "xkb_layout" "us"
    [ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
    [ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 7.687] (II) LoadModule: "synaptics"
    [ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
    [ 7.687] compiled for 1.14.1, module version = 1.7.1
    [ 7.687] Module class: X.Org XInput Driver
    [ 7.687] ABI class: X.Org XInput driver, version 19.1
    [ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 7.687] (**) Option "Device" "/dev/input/event7"
    [ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 7.810] (**) Option "TapButton1" "1"
    [ 7.810] (**) Option "TapButton2" "2"
    [ 7.810] (**) Option "TapButton3" "3"
    [ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
    [ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 7.853] (II) No input driver specified, ignoring this device.
    [ 7.853] (II) This device may have been added with another device file.
    Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
    In case it's of any use, this is my # uname -a
    Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
    Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
    Any ideas or advice to point me in the right direction would be very much appreciated.
    Thanks in advance.
    Last edited by contiver (2013-08-16 20:25:34)

    I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
    static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
    but it didn't work for me.
    Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
    BUG: unable to handle kernel paging request at ffffc90014ce8000
    IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
    Oops: 0002 [#1] PREEMPT SMP
    Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
    CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
    Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
    task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
    RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
    RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
    RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
    RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
    R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
    R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
    FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Stack:
    0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
    ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
    0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
    Call Trace:
    [<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
    [<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
    [<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
    [<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
    [<ffffffff813200bd>] redraw_screen+0x17d/0x240
    [<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
    [<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
    [<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
    [<ffffffff8130b407>] tty_ioctl+0x277/0xb90
    [<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
    [<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
    [<ffffffff8117328e>] ? ____fput+0xe/0x10
    [<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
    [<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
    [<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
    Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
    RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
    RSP <ffff8800797efaa8>
    CR2: ffffc90014ce8000
    ---[ end trace aff6cb5ad5097aef ]---

  • [SOLVED] X freezes after "exit"; can't kill X nor use the keyboard

    Hi!
    I've got a problem with my X server on my fresh installed Arch system. I followed the "Beginner's Guide" and edited the .xinitrd to start xterm for testing. This works well, but unfortunately X seems to freeze when I want go back to the shell via "exit" or when I want to change to another virtual console (Ctrl-Alt F1).
    When this happens, my screens go black and my keyboard doesn't work anymore, however I can log in via SSH. I can't kill X and the fourth core of my cpu is at 100%.
    This happens when I use a auto-configured xorg.conf from nvidia-xconfig (http://paste.pocoo.org/show/224004/) or when I use my "old" configuration from Ubuntu 9.10 (http://paste.pocoo.org/show/224005/). When I don't use the xorg.conf file at all, then X wont even start.
    I've got a Xorg.0.log from the test with the nvidia-xconfig generated xorg.conf: http://paste.pocoo.org/show/224002/ I can't see what's wrong here.
    Thanks for your help!
    Last edited by quaec (2010-06-11 22:08:35)

    Ok, I had started to write that the nvidia-beta driver didn't changed anything, but after a reboot it seems to work.
    So, with the nvidia-beta driver from the AUR and the following x.org configuration it works:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    # Screen 1 "Screen1" RightOf "Screen0"
    # InputDevice "Mouse0" "CorePointer"
    # InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Disable "glx"
    Load "glx"
    Load "dbe"
    Load "dri"
    Load "record"
    Load "dri2"
    Load "extmod"
    EndSection
    #Section "InputDevice"
    # Identifier "Keyboard0"
    # Driver "kbd"
    #EndSection
    #Section "InputDevice"
    # Identifier "Mouse0"
    # Driver "mouse"
    # Option "Protocol" "auto"
    # Option "Device" "/dev/input/mice"
    # Option "ZAxisMapping" "4 5 6 7"
    #EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    #Section "Monitor"
    # Identifier "Monitor1"
    # VendorName "Monitor Vendor"
    # ModelName "Monitor Model"
    #EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "SWcursor" # [<bool>]
    #Option "HWcursor" # [<bool>]
    #Option "NoAccel" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "Rotate" # [<str>]
    #Option "VideoKey" # <i>
    #Option "FlatPanel" # [<bool>]
    #Option "FPDither" # [<bool>]
    #Option "CrtcNumber" # <i>
    #Option "FPScale" # [<bool>]
    #Option "FPTweak" # <i>
    #Option "DualHead" # [<bool>]
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "GT200 [GeForce GTX 260]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "SWcursor" # [<bool>]
    #Option "HWcursor" # [<bool>]
    #Option "NoAccel" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "Rotate" # [<str>]
    #Option "VideoKey" # <i>
    #Option "FlatPanel" # [<bool>]
    #Option "FPDither" # [<bool>]
    #Option "CrtcNumber" # <i>
    #Option "FPScale" # [<bool>]
    #Option "FPTweak" # <i>
    #Option "DualHead" # [<bool>]
    Identifier "Card1"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "G98 [GeForce 8400 GS]"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    #Section "Screen"
    # Identifier "Screen1"
    # Device "Card1"
    # Monitor "Monitor1"
    # SubSection "Display"
    # Viewport 0 0
    # Depth 1
    # EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 4
    # EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 8
    # EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 15
    # EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 16
    # EndSubSection
    # SubSection "Display"
    # Viewport 0 0
    # Depth 24
    # EndSubSection
    #EndSection
    Thanks for your help, BKLive!
    Last edited by quaec (2010-06-11 22:08:05)

  • [Solved] System freezes after 10 minutes if no monitor attached

    I've got a server machine that has been running Arch for a month now. It has had a problem of constant freezing all the time. At first it seemed completely random but today I noticed the system freezes up exactly after 10.00 minutes of uptime, if there is no monitor plugged into the system. If I unplug the display after ten minutes, the system will run fine as long as I want to (days, weeks) without it. Ten minutes is also the time after which the monitor will go into stand-by mode. Seems like some kind of a power-saving bug? No entries in any log file @ /var/log...
    The system runs only basic home network functionalities; it serves as an NFS server, a print server (CUPS) and runs Lighttpd as a web server. It doesn't do Xorg nor has any fancy kernel modules loaded either. The system is up-to-date (stable repos). No custom-built software.
    Somewhat sad since I previously ran NetBSD on the server, but it didn't support my printer-scanner (only printer OR scanner, one at a time), then switched to FreeBSD which failed with my new WLAN card, so then turned to Arch that I've ran on desktop for years now (also like the BSD-ness), and then this...
    Last edited by sj87 (2010-02-07 18:47:43)

    Case closed, the source of trouble was once again kernel mode-setting (I think)... I blacklisted the drm_kms_helper module and some other stuff and that disabled the KMS functionality, and the server now doesn't freeze at any point.
    Last edited by sj87 (2010-02-07 18:48:23)

  • [Solved]System freeze after reboot after upgrade

    Hi,
    At first I encountered the problem that "loading udev uevents" took forever, so I loaded a live cd and upgraded everything. Since then, my computer does boot and doesn't hang at loading udev uevents, but it now freezes when it shows a login field after booting. The keyboard doesn't do anything, and the screen just keeps frozen like a popsicle. I wanted to downgrade my nvidia and kernel version, but when I try to downgrade my nvidia version it states that My kernel version is too high, and when I try to downgrade that, My nvidia version is too high, seemed like an impossible loop to me.
    Ow, and between booting I can see a lot of errors starting daemons and mounting the systems as well, but as I can't boot it's quiet hard to look them up (if I knew where to look, but I don't because I'm kind of a newbie) and post them here.
    I've been thinking about installing arch all over again, but it seems to mee that I then have to lose all the installed programs, daemons and configurations which took me over weeks to create and make work, so any other option would be very helpfull.
    Tom
    Last edited by tomzooi (2012-04-21 15:29:36)

    rc.conf :
    DAEMONS=(syslog-ng network netfs @crond hal slim fam cups @sshd @mpd @alsa @samba mysqld httpd @transmissiond @xinetd)
    I use an nvidia card, I boot to x using slim
    I currently can boot again normally, loging and use the command prompt (thank god), also the daemons are all running, except for slim. When I start slim in the terminal I get the error:
    slim: Stale lockfile found, removing it
    Somehow I managed to fix this by removing and reïnstalling the kernel, but slim isn't running yet.

  • Arch freezing after inactivity - ACPI?

    Hi. I've got a problem after installing arch (2011.08.19)
    When I boot computer and I don't give any action for the system after few seconds the system it's freezed.
    I don't install any ACPI daemons.
    Info from dmesg | grep acpi:
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [    2.165674] ACPI: acpi_idle registered with cpuidle
    Info from lsmod | grep acpi:
    pata_acpi               3376  0
    libata                173297  2 pata_acpi,ata_piix

    Sorry for replying late. I have few years old laptop which had ran Arch well earlier.  There's some 8mb corrupted part or something like that in hdd, but that part is not in use. http://eu.computers.toshiba-europe.com/ … _ID=120941
    I installed Debian yesterday and it worked well until I broke it, so is that freezing about my arch install or what?
    Last edited by rixutin (2009-11-11 14:22:49)

  • Elements 8 freezing after scan and copy

    I am having trouble when I scan a photo into Elements 8, then select a portion of the photo with the marquee tool, then go to edit and copy.  The program freezes every time I try this. My in-house tech guru (aka college-aged son) suggests re-installing the program, but I thought I would see if this is a known problem first.  Thanks.

    What is the resolution that you are scanning at? And is it in the jpg format?
    You might want to go through the steps at - http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Editor_cra shes
    HTH,

Maybe you are looking for

  • I cannot swith gmail settings from compact to cozy view in Mozilla, it works fine in Chrome and other browsers, I tried it in Mozilla safe mode and was fine

    Just the other day gmail settings in Mozilla suddenly went from "cozy" to "compact" view. Gmail is not letting me reset to cozy in Mozilla, saying it's only for larger screens. However, it does let me use cozy in Chrome. You had one support forum (ht

  • How to show a crystal report in a SAP Portal?

    Hi I am trying to show a crystal report in SAP Portal. I did a crystal enterprise report iview, and in SAP portal I got this error when I trying to show it: 404 Missing Page The page you requested is not available on this web server for one of the fo

  • Customizing Self Registration Form

    Hi, We have a scenario where when a user comes to perform self registration on OIM, we have to take different fields as input based on the user type. For example if the user is an external contractor we want to take input fields 1 and 2, and if the u

  • XApp Analytics in BI 7.0

    Dear all, I am trying to implement xApp Analytics in BI 7.0. After I installed the analytics 1.1, I find the problem is most sources system is from BI content 3.5 so some of queries are missing in BI content 7.0. (I thought BI content 7.0  would have

  • Trouble uploading photos with card reader

    I am having trouble with uploading. The card reader works fine on my husband's PC but not on my MacBook. It will upload 7-8 photos and say the card reader was ejected wrong. The card reader is still in the USB port at the time of the error message an