[SOLVED] Arch on Macbook Pro, can't boot

Hardware: Macbook Pro 4.1 Penryn 15"
OS: Arch64 (dual booting osx, using refit)
Issues: When plugged in everything's fine. But when booting from battery it hangs midway into the boot process. If i plug it in right away it continues booting normally. If i don't it freezes and i have to turn it off by pressing the power button.
I've googled and couldn't find anything. Even searched the ubuntu forums. I can live with not having the wireless (broadcom) working as there aren't many wifi hot spots around my area, but not being able to boot from battery s*cks. It beats the whole purpose of having a laptop.
Has anyone had any similar issues? Please help!
Last edited by tengisu (2009-03-15 16:27:06)

tengisu wrote:Issues: When plugged in everything's fine. But when booting from battery it hangs midway into the boot process. If i plug it in right away it continues booting normally. If i don't it freezes and i have to turn it off by pressing the power button.
Hi thre,
I have a MacBook Pro 3.1, which I don't have any issues with at all. I also have a MacBook 4.1, which at one stage gave me similar problems to what you have, but not only during booting while on battery, but also when plugged in.
It didn't happen all the time though, just intermittently, and when it stopped - it always stopped during discovery of CD-ROM and hard-drives. I got around it by inserting a CD/DVD halfway into the DVD slot and then removing it again - that "nudged" the boot process into life again. This problem has now gone away after my most recent reformat and re-install.
I'd suggest you loo into where it freezes, and if it freezes at the same spot (more or less) google for whatever it says on the screen and see if you can find anything. Also, if it freezes around CD/DVD discovery, try what I did. If nothing of this helps, do a complete re-install of the Arch partition(s) and make sure you do a sudo pacman -Syu to get the latest (unless you already install using ftp/http)
Niels

Similar Messages

Late 2011 MacBook Pro can't boot after Yosemite install

After installing Yosemite on this late 2011 MacBook Pro it stops about a third of the way into booting up. It displays a null sign. I can boot into recovery disk, or external HD (I don't have a backup of this system, but can boot from my MacBook Air's clone) if I use option-R or just option at startup. It won't go into Safe Mode. From the ext HD I have reinstalled Yosemite on the MBP, but it still freezes mid-boot. Disk Utility repair permissions, repair HD, zap PRAM, SMC, I've tried all of these (from reading advice here, and PM from Ogelthorpe). I have copied the Etre Report below. Suggestions?
EtreCheck version: 2.1.8 (121)
Report generated March 24, 2015 at 2:16:55 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 431
Video Information: ℹ️
    Intel HD Graphics 3000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D113c) - Time since boot: 0:25:56
Disk Information: ℹ️
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) /Volumes/Macintosh HD : 498.88 GB (345.40 GB free)
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Western Digital My Book 1140 2 TB
        EFI (disk2s1) <not mounted> : 210 MB
        MBPClone (disk2s2) /Volumes/MBPClone : 249.35 GB (119.30 GB free)
        Recovery HD (disk2s3) <not mounted> [Recovery]: 784 MB
        Clone27iMac (disk2s4) /Volumes/Clone27iMac : 1.08 TB (918.40 GB free)
        Recovery HD (disk2s5) <not mounted> [Recovery]: 650 MB
        MediaorWhatever (disk2s6) / : 665.53 GB (583.65 GB free)
        Recovery HD (disk2s7) <not mounted> [Recovery]: 650 MB
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.ricoh.print.kext.USBPrintClass (3.01) [Click for support]
        /Volumes/MBPClone/Applications/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.4) [Click for support]
        /Volumes/MBPClone/Library/Sophos Anti-Virus/InterCheck.app
    [not loaded]    com.sophos.kext.sav (8.0.14 - SDK 10.5) [Click for support]
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [running]    com.bombich.ccchelper.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.transcend.TSTRIMHandlerHelp.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    WD Quick View    Application (/Library/Application Support/WDSmartware/WDQuickView.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.3.2.6 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Silverlight: Version: 4.0.50917.0 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Scorch: Version: 6.2.0 [Click for support]
    DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Perian [Click for support]
    WDQuickView [Click for support]
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
    Destinations:
        MBP Backup [Local]
        Total size: 299.73 GB
        Total number of backups: 20
        Oldest backup: 2013-03-14 16:58:24 +0000
        Last backup: 2014-02-25 16:24:25 +0000
        Size of backup disk: Excellent
            Backup size 299.73 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         3%    mds
         0%    AppleSpell
         0%    fontd
         0%    mds_stores
Top Processes by Memory: ℹ️
    249 MB    mds_stores
    150 MB    Finder
    116 MB    Dock
    116 MB    Spotlight
    73 MB    ocspd
Virtual Memory Information: ℹ️
    801 MB    Free RAM
    1.59 GB    Active RAM
    785 MB    Inactive RAM
    1.09 GB    Wired RAM
    2.01 GB    Page-ins
    446 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 24, 2015, 01:44:49 PM    Self test - passed
    Mar 22, 2015, 10:30:37 PM    /Library/Logs/DiagnosticReports/VideoMemoryTool_2015-03-22-223037_[redacted].cr ash

Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU when it is finished and return to the installer. Install Snow Leopard. Download and install Mac OS X 10.6.8 Update Combo v1.1.

128gb ssd on macbook pro can't boot from any win dvd

Like in title, installed 128gb ssd on macbook pro and can't boot from any windows based dvd.
I’m try just everything... First I was put new ssd disk in laptop, boot and than choose windows boot cd disk for startup device. CD/DVD working 10-20 sec and after that nothing happened for 3-4 min… I can just turn off computer. I was try to boot with win7, vista, xp and other boot dvd-s for partition management… Every attemp simply freeze machine.
Then I was try to install mac os (snow leopard) from install dvd and installation was done smooth without any problem… Really don’t know why I can install osx and can’t install or boot any type of windows cd/dvd.
After installing snow leopard I was try to make new partition and install windows trough apple bootcamp 3.0 but again same problem. When machine reset and try to boot from cd it simply freeze.
Falcon 128gb SSD attached over USB workin fine eaven osx booting from external ssd. SO, next what I wish to try is to clone old 320gb with two partitions to new 120gb ssd. I'm just try eaven this and when ssd attach to laptop it says that there is no bootable device... so, they don't see ssd like bootable...
Configuration:
Macbook pro 15 (late 2008 i think)model 3.1
128gb gskill falcon ssd
Mac firmware 1.3 (i think, how I can make upgrade and check fw ver under windows)
hdd firmware (1571)
Regards,
Benis

p.s. any sugestion for some other ssd that will work on this machine?

After recovering OS X, macbook pro can't boot past my user account

My Macbook Pro suddenly started running extremely slow. Ran disk utility a few times but didn't seem to help. I reinstalled OS X from the recover partition and that seem to work OK (took about an hour and a half). The problem is that the system can't seem to boot through the my user account. If have restarted a few times and it seems to stop at the same point (about 1/2 way through he progress bar). I re-ran disk utility using command R and it reported the disk was OK, but no change in the results.
Anybody have some suggestions?

Try running Apple Hardware Test
Using Apple Hardware Test
The disk utility only checks file structure, not disk integrity.
When you go to Dis Utility is Verified listed under S.M.A.R.T. status?
If you formatted the disk and reinstalled the OS that indicates a hardware problem. Maybe disk and may something else.

After installation of Mac OS 10.10.3, my MacBook Pro can't boot anymore.

I have MacBook Pro late 2013 with Mavericks 10.10.2. This morning after installation update, my MBP rebooted itself and can't find the installed OS.
MBP late 2013, 2,6 GHz i5 processor with 512 gb flash, OS X 10.10.2. System disk had two partitions.

SOLUTION FOR ME:
I used OS X internet recovery system to install OS X. It seems to be installed correctly and none of my files, apps and settings are missing.
https://support.apple.com/en-us/HT201314

Macbook Pro, Can't boot after EFI update....

Updated the EFI this morning- Prior to that update, everything was working fine. After the update, I have the flashing question mark folder of doom. Can't use internet recovery even while plugged into ethernet. What happened? Everything was going so well Apple! I'm on Lion, latest updates, 2011 MBP 2.2 i7, SSD 120g with a 750g running beside it (data doubler).

Okay, so the disk is supposed to show up as disk0s2.
Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
I think next I'm going to try swapping out the new HD in my MacBook Pro with the one it originally came with.

My iMac can't boot Windows 7 From USB while my Macbook Pro can do it

I install Windows 7 64 bit and rEFIt into a USB hard disk and hope to boot from my iMac 27" (2010 Mid). However, it shows that no boot deivce is found.
If I plug the SAME disk to my Macbook Pro 17" (2009 Mid), it can boot Windows 7 without any problem.
I tried with Linux and get same result, iMac says no boot device while my Macbook Pro can boot it without problem.
I tried experiment for weeks and still can't get iMac work.
I think it is very abnormal and I wonder if someone can tell me how to fix it or any directory to solve this problem.

My iMac runs snow leopard and my MacBook pro runs Lion. Both of them are updated with latest updated. I just get one external USB hard disk with Windows 7 32 bit installed and magically, my iMac can boot it from rEFIt. However, I don't know what makes it works. I tried to make same configuration, software and steps on other USB hard disks for hundreds times but I can repeat it again. All other attempt can make USB hard disk boot on MacBook Pro but not iMac only.

My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton

My macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

my macbook pro will not boot. It gets the grey screen with the apple until the bar is half way across and then shuts down. The only screen I can get to is in safe mode and I don't know what to do with that

Mac OS X: Gray screen appears during startup - Apple Support

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro will not boot up

Hello,
My three-month-old MacBook Pro refuses to boot up. The problem began about two days ago, and since then, the situation hasn't changed. When I press the power button, the Apple logo on the boot screen appears, but it quickly flashes on and off, with a "no symbol" and a symbol consisting of a folder with a question mark on it flashing at random concurrently. I really need my MacBook Pro to boot up, because I require it for homework that is due tomorrow. I have never dropped or even scratched this computer, and I always use it in a cool and dry environment, so I don't think it could have been anything to do with overheating. But I'm no expert. Does anyone know what I can do? Thank you so much, in advance!

Usually the flashing question mark means that the computer can't find a bootable device. Your hard drive may be damaged.
Try booting into your Recovery partition, holding down the command and R keys whilst booting. Use Disk Utiity to both verify ad repair your hard drive. If the drive cannot be repaired, called back (you can access Safari from the Recovery partition).
Clinton

Macbook Pro Will Not Boot Windows Disk

I have a late 08 (or early 09) Unibody Macbook Pro 2.53Ghz. I start the Bootcamp Assistant and successfully create my Windows partition. When I restart with the Windows 7 disk, I get a blinking cursor for 1 second then it goes to a black screen and never leaves. I have tried several different Windows 7 disks with the same result. I have even tried booting from a Windows Vista, Windows XP and even a Ubuntu disk all with the same result, stuck at a black screen.
I took the hard drive out of this mac and put it into my wife's older Macbook pro, and it booted off the Windows 7 disk and completed the install to the drive with no issues. I then put the hard drive back into my Macbook Pro and get the same black screen when trying to start the Windows partition, and still have the same problem that it will not boot from any other OS disk be it Windows or Ubuntu. It boots from OS X DVDs without a problem.
Also several months ago I had a Windows XP installation on this computer with no issues. I wiped it just before going to Snow Leopard.
Any clue as to what is going on here?

What is really odd is if I take my hard drive out of my Unibody Macbook Pro and put it into my wife's non-unibody Macbook Pro, it boots the Windows partition with no problem (Remembering I previously swapped these hard drives to complete the Windows installation to my hard drive). Seeing as the disk boots on her machine fine and not in mine, and my Windows cds (DVDs) boot fine on hers and not on mine, it seems to me it's something specific about my machine, but I can't imagine what it is.

Mid 2006 Macbook Pro won't boot (from HD or optical)

My mid 2006 Macbook Pro will not boot from the hard disk, or from the internal DVD. I am currently running the latest version of Lion (10.7).
I tried searching the forums and found a similar issue here:
https://discussions.apple.com/thread/1687899?start=0&tstart=0
But that was with a Mac Mini. And it doesn't look like the OP issue was ever resolved. I am having the exact same problem.
When attempting a normal boot from the internal HD of the Macbook Pro. It will make the happy chime of a successful POST. It will display the Apple logo. And that's as far as she gets.
No spinning wheel, no error image, no nothing. Eventually the system will start spinning up the fans as if it were under load (this was after about a half hour of just letting it sit there).
Doing a verbose boot, it never went past this:
com.apple.driver.Apple.IntelCPUPowerManagement
Photo of verbose boot:
Here's what I've tried.
1. Bought a brand new battery (as the current one was at death's door)
2. Zapped PRAM (Apple + Option + P + R)
3. Reset SMC according to these directions: http://support.apple.com/kb/HT3964?viewlocale=en_US
4. Attempted to boot to my original Tiger (10.4) install DVD, only to stop at this point during a verbose boot (Apple V):
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style
Photos:
5. I am able to put her in Target Disk Mode (hold T at boot). Then with a firewire cable I can connect it to my wife's Macbook 13" and I am able to run disk utility on it! Disk Utility did find and repair errors, however, it still refuses to boot.
6. I attempted to boot from my wife's Macbook 13" in Target Disk Mode. I put her machine in Target disk mode. Connected the firewire cable. Powered on my 15" MBP while holding the option key. Then I selected her drive as the boot disk... however it still refuses to boot even from a known working HD.
7. Finally, I swapped around RAM DIMMs with no change in behavior.
Help! I know she's an older gal (Laptop is 6 years old now) but I'm not exactly flush with cash and would rather not give up on her just yet.

My Mac started freezing (colored pinwheel) every time I tried using any application (i.e. Safari, iPhoto). After restarting for the 2nd time, it would no longer boot - makes start up sound but gets stuck on gray screen w/ apple icon. I tried resetting PRAM also - did nothing. I decided to reinstall OS; problem now is my HD is nowhere to be found! I am a tech dummy so this is way beyond my comprehension...I'm not seeing my HD from the Disk Utility either???
Side question...I backed up my files (mostly pics JPEG and videos) on DVD (had to compress to save). Why can't I open files on PC?

Macbook Pro will not boot beyond grey screen. System freezes.

My Macbook Pro will not boot-up or get beyond the grey screen (with spinning gear wheel.) I've tried all the recommended actions: resetting PRAM, disk repair, permissions repair, re-boot in safe mode etc but still the problem persists. When viewing the safe-boot in verbose mode, the system seems to hang at the stage when it's checking the Airport & Ethernet - the last line on the page reads: "AppleBCOM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?"
Any ideas how to fix this without doing an Archive & Install?
I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them.
Any help gratefully received. Many thanks.

jfromplymouth wrote: ...I'm assuming that if I do an "Archive & Install" then I will lose all my Applications (VLC, Handbrake, MS Office for Mac etc.) Will this actually be the case? Will I lose them...
Archive and Install just affects the System files, so any apps you have should still be available afterwards. The Installer on the disk that came with your Mac, when you bought it, will tell you this before you proceed. Of course, you can always back out of the Installer if you feel chicken.
Notwithstanding it is still necessary to backup everything. You need to check that Time Machine is set to also backup your Applications folder. It might be set not to do this.
It may not be necessary to worry about this if you have the original installer disc(s). I think any stuff downloaded from iTunes etc can be re-downloaded. However, it's probably quicker to get Time Machine to backup your apps if you can afford the HDD space. It's bound to be quicker than re-downloading the stuff plus any updates. And of course there's those Apps that you have but forgotten about. What about them?

MacBook Pro will not boot

MacBook Pro will not boot. Just get grey screen. When I hold down control + R, I get blank blue screen.

Which model MacBook Pro do you have?
It's COMMAND and R that will take you to your Recovery partion, not Control and R.
If a later model, can you boot into Internet Recovery (booting whilst holding down the command, option and R keys)?
Clinton

[SOLVED] Arch on Macbook Pro, can't boot

Similar Messages

Maybe you are looking for