[SOLVED!] Archiso -- KDM - LXDM don't start at boot (enabled)
Hello,
I have installed on this computer my customized Archiso (with no special configurations). I have enabled kdm.service, but nothing happened. After reboot either.
I have now tried with LXDM, same thing. With "systemctl status" I usually get something like: "enabled, dead"
If I start kdm or lxdm manually, it works.
sudo systemctl start lxdm; sudo systemctl status lxdm
lxdm.service - LXDE Display Manager
Loaded: loaded (/usr/lib/systemd/system/lxdm.service; enabled)
Active: active (running) since vie 2013-03-29 13:54:08 UTC; 46min ago
Main PID: 319 (lxdm-binary)
CGroup: name=systemd:/system/lxdm.service
└─321 /usr/bin/X :0 vt07 -nolisten tcp
‣ 319 /usr/sbin/lxdm-binary
mar 29 13:54:08 ubunchu systemd[1]: Starting LXDE Display Manager...
mar 29 13:54:08 ubunchu systemd[1]: Started LXDE Display Manager.
mar 29 13:54:12 ubunchu lxdm-binary[319]: pam_unix(lxdm:session): session opened for user ubunchu by (uid=0)
Dmesg: http://pastie.org/private/8n97afoezf3urejz3qizeq
On some posts they mentioned that maybe nvidia or a module starts up too late, or the login managers too early.
Any tips/hints on what should I try?
Thanks in advance.
Cheers!
Last edited by ubunchu (2013-04-22 22:06:12)
At boot I can get:
[root@ubunchu ~]# systemctl status kdm
kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled)
Active: inactive (dead)
[root@ubunchu ~]# ls -al /etc/systemd/system/
total 32
drwxr-xr-x 4 root root 4096 abr 10 22:51 .
drwxr-xr-x 5 root root 4096 abr 18 09:10 ..
-rw-r--r-- 1 root root 1660 mar 23 16:43 [email protected]
lrwxrwxrwx 1 root root 46 mar 24 13:39 dbus-org.freedesktop.NetworkManager.service -> /usr/lib/systemd/system/NetworkManager.service
lrwxrwxrwx 1 root root 41 mar 23 15:50 default.target -> /usr/lib/systemd/system/multi-user.target
-rw-r--r-- 1 root root 230 mar 7 14:07 dhcpcd.service
lrwxrwxrwx 1 root root 35 abr 10 22:51 display-manager.service -> /usr/lib/systemd/system/kdm.service
-rw-r--r-- 1 root root 134 mar 7 14:07 etc-pacman.d-gnupg.mount
drwxr-xr-x 2 root root 4096 abr 18 09:10 multi-user.target.wants
drwxr-xr-x 2 root root 4096 mar 24 13:39 network.target.wants
-rw-r--r-- 1 root root 325 mar 7 14:07 pacman-init.service
On every system I install my custom archiso (basic install) the same thing happens, what am I missing?
Similar Messages
-
[SOLVED]How to configure pptp vpn start on boot with netcfg?
I've configured 2 profiles:
eth0 and ppp0, where ppp0 is a pptp vpn tunnel.
$ ls /etc/network.d/
eth0 examples interfaces ppp0
$ cat /etc/network.d/ppp0
CONNECTION='ppp'
INTERFACE='ppp0'
PEER='dxt'
PPP_TIMEOUT=10
$ cat /etc/conf.d/netcfg
# Enable these netcfg profiles at boot time.
# - prefix an entry with a '@' to background its startup
# - set to 'last' to restore the profiles running at the last shutdown
# - set to 'menu' to present a menu (requires the dialog package)
# Network profiles are found in /etc/network.d
NETWORKS=(eth0 ppp0)
# Specify the name of your wired interface for net-auto-wired
WIRED_INTERFACE="eth0"
# Specify the name of your wireless interface for net-auto-wireless
WIRELESS_INTERFACE="wlan0"
Manually, I can start up ppp0 correctly.
$ sudo netcfg -u ppp0
:: ppp0 up [ BUSY ] Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
CHAP authentication succeeded
MPPE 128-bit stateless compression enabled
Cannot determine ethernet address for proxy ARP
local IP address 10.100.3.132
remote IP address 10.100.3.1
[ DONE ]
$ ip addr list dev ppp0
8: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1496 qdisc pfifo_fast state UNKNOWN qlen 3
link/ppp
inet 10.100.3.132 peer 10.100.3.1/32 scope global ppp0
But after booting, only eth0 is up. How to configure ppp0 to start on boot with netcfg?
Last edited by rchiang (2012-12-21 01:09:32)Thanks a lot for your instruction.
netcfg works now!
chris_l wrote:
Did you
systemctl enable [email protected] -
[SOLVED] rtorrent&screen don't start at boot time
Hello. I use rc-script from ArchWiki to start screen with rtorrent (http://wiki.archlinux.org/index.php/RTo … ith_screen), but at boot time neither rtorrent nor screen start, although script prints "[DONE]". If I login as root and start script manually it works perfect, but I can't understand why it doesn't start automatically.
Please, help.
P.S. Of course script was added to DAEMONS array in rc.conf.
Last edited by Atragor (2009-03-29 11:56:10)jordz, adding command to rc.local didn't change anything.
LeoSolaris, yes, script is executable, and according to screen's man page:
-d -m Start screen in "detached" mode. This creates a new session but doesn't attach to it. This is useful for system startup scripts.
I think it's something that could be called "daemon mode".
Maybe some environment variables must be set in order to execute screen and rtorrent? I've tried to set HOME manually but it didn't help. -
[Solved]E17 startup apps don't start after update.
[2013-01-23 16:30] Running 'pacman -Syu'
[2013-01-23 16:30] synchronizing package lists
[2013-01-23 16:30] starting full system upgrade
[2013-01-23 16:38] upgraded cairo (1.12.8-2 -> 1.12.10-2)
[2013-01-23 16:38] upgraded icu (50.1.1-1 -> 50.1.2-1)
[2013-01-23 16:38] upgraded harfbuzz (0.9.9-2 -> 0.9.9-3)
[2013-01-23 16:38] upgraded imagemagick (6.8.0.7-1 -> 6.8.1.9-1)
[2013-01-23 16:38] upgraded inkscape (0.48.4-2 -> 0.48.4-3)
[2013-01-23 16:38] >>> Updating module dependencies. Please wait ...
[2013-01-23 16:38] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-01-23 16:38] ==> Building image from preset: 'default'
[2013-01-23 16:38] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-01-23 16:38] ==> Starting build: 3.7.4-1-ARCH
[2013-01-23 16:38] -> Running build hook: [base]
[2013-01-23 16:38] -> Running build hook: [udev]
[2013-01-23 16:38] -> Running build hook: [autodetect]
[2013-01-23 16:38] -> Running build hook: [modconf]
[2013-01-23 16:38] -> Running build hook: [block]
[2013-01-23 16:38] -> Running build hook: [filesystems]
[2013-01-23 16:38] -> Running build hook: [usbinput]
[2013-01-23 16:38] -> Running build hook: [fsck]
[2013-01-23 16:38] -> Running build hook: [keymap]
[2013-01-23 16:38] ==> Generating module dependencies
[2013-01-23 16:38] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-01-23 16:38] ==> Image generation successful
[2013-01-23 16:38] ==> Building image from preset: 'fallback'
[2013-01-23 16:38] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-01-23 16:38] ==> Starting build: 3.7.4-1-ARCH
[2013-01-23 16:38] -> Running build hook: [base]
[2013-01-23 16:38] -> Running build hook: [udev]
[2013-01-23 16:38] -> Running build hook: [modconf]
[2013-01-23 16:38] -> Running build hook: [block]
[2013-01-23 16:38] -> Running build hook: [filesystems]
[2013-01-23 16:38] -> Running build hook: [usbinput]
[2013-01-23 16:38] -> Running build hook: [fsck]
[2013-01-23 16:38] -> Running build hook: [keymap]
[2013-01-23 16:38] ==> Generating module dependencies
[2013-01-23 16:38] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-01-23 16:38] ==> Image generation successful
[2013-01-23 16:38] upgraded linux (3.7.3-1 -> 3.7.4-1)
[2013-01-23 16:38] upgraded qt (4.8.4-1 -> 4.8.4-2)
One of these packages broke it. Disabled and reenabled the startup apps in the settings but no go. Worked fine this morning when i turned on the computer. Any ideas?
Last edited by 89c51 (2013-01-23 15:07:48)Never mind.
It fixed itself after a couple reboots -
Kmix and Klipper crashes and don't start, KDE 4.4 [SOLVED]
I had a trouble with Plasma after adding a "fancy panel" which was placed at the same position as my normal panel. Everytime I tried to remove it, Plasma crshed, so I had to delete a part of a config file. But also the Klipper and Kmix don't start:
Crash handler says:
Klipper:
Application: Klipper (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708493 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c62459 in kdemain () from /usr/lib/libkdeinit4_klipper.so
#31 0x0000000000406b7e in _start ()
KMix:
Application: KMix (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708553 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c524b0 in KMixApp::KMixApp() () from /usr/lib/libkdeinit4_kmix.so
#31 0x00007f6051c2b74d in kdemain () from /usr/lib/libkdeinit4_kmix.so
#32 0x0000000000406b7e in _start ()
How can I fix it?
Last edited by Staerseus (2010-02-14 12:19:01)SOLVED! Update to the newest version of KDE 4.4 helped me!
-
Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva
Use the Adobe Cleaner Tool:
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -
[Solved] Libreoffice 3.6.1.4 don't start
Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash). -
WEB.SHOW_DOCUMENT don´t start Firefox 3.5
Hi @all,
I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
I call the fmx with a JNLP File.
There is no other browser installed on my system.
Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
Thanks for your suggestions.
ThomasHi,
no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
e.g.
web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
I use JDK 6 Update 16 and Forms works fine with that version.
I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
Thomas -
[SOLVED] nvidia and xorg-server, slow start compared to nv
I've seen many similar topics but none that have been solved, therefore the new topic.
Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
Section "Device"
Identifier "Device0"
Driver "nvidia"
EndSection
The /var/log/Xorg.0.log when using nvidia:
[ 22.779]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 22.779] X Protocol Version 11, Revision 0
[ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 22.779] Build Date: 30 May 2012 07:24:13PM
[ 22.779]
[ 22.779] Current version of pixman: 0.26.0
[ 22.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
[ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.106] (==) No Layout section. Using the first Screen section.
[ 23.106] (==) No screen section available. Using defaults.
[ 23.106] (**) |-->Screen "Default Screen Section" (0)
[ 23.106] (**) | |-->Monitor "<default monitor>"
[ 23.106] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.106] (**) | |-->Device "Device0"
[ 23.106] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.106] (==) Automatically adding devices
[ 23.106] (==) Automatically enabling devices
[ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.219] Entry deleted from font path.
[ 23.414] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.414] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.414] (II) Loader magic: 0x7c58e0
[ 23.414] (II) Module ABI versions:
[ 23.414] X.Org ANSI C Emulation: 0.4
[ 23.414] X.Org Video Driver: 12.0
[ 23.414] X.Org XInput driver : 16.0
[ 23.414] X.Org Server Extension : 6.0
[ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.415] (II) LoadModule: "extmod"
[ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.487] (II) Module extmod: vendor="X.Org Foundation"
[ 23.487] compiled for 1.12.2, module version = 1.0.0
[ 23.487] Module class: X.Org Server Extension
[ 23.487] ABI class: X.Org Server Extension, version 6.0
[ 23.487] (II) Loading extension MIT-SCREEN-SAVER
[ 23.487] (II) Loading extension XFree86-VidModeExtension
[ 23.487] (II) Loading extension XFree86-DGA
[ 23.487] (II) Loading extension DPMS
[ 23.487] (II) Loading extension XVideo
[ 23.487] (II) Loading extension XVideo-MotionCompensation
[ 23.487] (II) Loading extension X-Resource
[ 23.487] (II) LoadModule: "dbe"
[ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.512] (II) Module dbe: vendor="X.Org Foundation"
[ 23.512] compiled for 1.12.2, module version = 1.0.0
[ 23.512] Module class: X.Org Server Extension
[ 23.512] ABI class: X.Org Server Extension, version 6.0
[ 23.512] (II) Loading extension DOUBLE-BUFFER
[ 23.512] (II) LoadModule: "glx"
[ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
[ 26.868] compiled for 4.0.2, module version = 1.0.0
[ 26.868] Module class: X.Org Server Extension
[ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 26.869] (II) Loading extension GLX
[ 26.869] (II) LoadModule: "record"
[ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.941] (II) Module record: vendor="X.Org Foundation"
[ 26.941] compiled for 1.12.2, module version = 1.13.0
[ 26.941] Module class: X.Org Server Extension
[ 26.941] ABI class: X.Org Server Extension, version 6.0
[ 26.941] (II) Loading extension RECORD
[ 26.941] (II) LoadModule: "dri"
[ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.011] (II) Module dri: vendor="X.Org Foundation"
[ 27.011] compiled for 1.12.2, module version = 1.0.0
[ 27.011] ABI class: X.Org Server Extension, version 6.0
[ 27.011] (II) Loading extension XFree86-DRI
[ 27.011] (II) LoadModule: "dri2"
[ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.046] (II) Module dri2: vendor="X.Org Foundation"
[ 27.047] compiled for 1.12.2, module version = 1.2.0
[ 27.047] ABI class: X.Org Server Extension, version 6.0
[ 27.047] (II) Loading extension DRI2
[ 27.047] (II) LoadModule: "nvidia"
[ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.306] compiled for 4.0.2, module version = 1.0.0
[ 27.306] Module class: X.Org Video Driver
[ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.617] (++) using VT number 7
[ 27.678] (II) Loading sub module "fb"
[ 27.678] (II) LoadModule: "fb"
[ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.870] (II) Module fb: vendor="X.Org Foundation"
[ 27.870] compiled for 1.12.2, module version = 1.0.0
[ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.870] (II) Loading sub module "wfb"
[ 27.870] (II) LoadModule: "wfb"
[ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.879] (II) Module wfb: vendor="X.Org Foundation"
[ 27.879] compiled for 1.12.2, module version = 1.0.0
[ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.879] (II) Loading sub module "ramdac"
[ 27.879] (II) LoadModule: "ramdac"
[ 27.879] (II) Module "ramdac" already built-in
[ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 27.934] (==) NVIDIA(0): RGB weight 888
[ 27.934] (==) NVIDIA(0): Default visual is TrueColor
[ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
[ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
[ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
[ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
[ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
[ 30.789] (--) NVIDIA(0): clock
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
[ 30.789] (--) NVIDIA(0): LVDS
[ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 30.836] (==) NVIDIA(0):
[ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.836] (==) NVIDIA(0): will be used as the requested mode.
[ 30.836] (==) NVIDIA(0):
[ 30.836] (II) NVIDIA(0): Validated modes:
[ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
[ 31.892] (--) NVIDIA(0): option
[ 31.892] (--) Depth 24 pixmap format is 32 bpp
[ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 34.862] (II) Loading extension NV-GLX
[ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 37.299] (==) NVIDIA(0): Backing store disabled
[ 37.299] (==) NVIDIA(0): Silken mouse enabled
[ 37.300] (==) NVIDIA(0): DPMS enabled
[ 37.300] (II) Loading extension NV-CONTROL
[ 37.300] (II) Loading extension XINERAMA
[ 37.300] (II) Loading sub module "dri2"
[ 37.300] (II) LoadModule: "dri2"
[ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 37.300] (II) Module dri2: vendor="X.Org Foundation"
[ 37.300] compiled for 1.12.2, module version = 1.2.0
[ 37.300] ABI class: X.Org Server Extension, version 6.0
[ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
[ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 37.301] (==) RandR enabled
[ 37.301] (II) Initializing built-in extension Generic Event Extension
[ 37.301] (II) Initializing built-in extension SHAPE
[ 37.301] (II) Initializing built-in extension MIT-SHM
[ 37.301] (II) Initializing built-in extension XInputExtension
[ 37.301] (II) Initializing built-in extension XTEST
[ 37.301] (II) Initializing built-in extension BIG-REQUESTS
[ 37.301] (II) Initializing built-in extension SYNC
[ 37.301] (II) Initializing built-in extension XKEYBOARD
[ 37.301] (II) Initializing built-in extension XC-MISC
[ 37.301] (II) Initializing built-in extension SECURITY
[ 37.301] (II) Initializing built-in extension XINERAMA
[ 37.301] (II) Initializing built-in extension XFIXES
[ 37.301] (II) Initializing built-in extension RENDER
[ 37.301] (II) Initializing built-in extension RANDR
[ 37.301] (II) Initializing built-in extension COMPOSITE
[ 37.301] (II) Initializing built-in extension DAMAGE
[ 37.302] (II) Initializing extension GLX
[ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.717] (II) LoadModule: "evdev"
[ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.769] (II) Module evdev: vendor="X.Org Foundation"
[ 38.769] compiled for 1.12.0, module version = 2.7.0
[ 38.769] Module class: X.Org XInput Driver
[ 38.769] ABI class: X.Org XInput driver, version 16.0
[ 38.769] (II) Using input driver 'evdev' for 'Power Button'
[ 38.769] (**) Power Button: always reports core events
[ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.769] (--) evdev: Power Button: Found keys
[ 38.769] (II) evdev: Power Button: Configuring as keyboard
[ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 38.769] (**) Option "xkb_rules" "evdev"
[ 38.769] (**) Option "xkb_model" "evdev"
[ 38.769] (**) Option "xkb_layout" "se"
[ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
[ 38.835] (**) Video Bus: always reports core events
[ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 38.835] (--) evdev: Video Bus: Found keys
[ 38.835] (II) evdev: Video Bus: Configuring as keyboard
[ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 38.836] (**) Option "xkb_rules" "evdev"
[ 38.836] (**) Option "xkb_model" "evdev"
[ 38.836] (**) Option "xkb_layout" "se"
[ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.837] (II) Using input driver 'evdev' for 'Power Button'
[ 38.837] (**) Power Button: always reports core events
[ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.837] (--) evdev: Power Button: Found keys
[ 38.837] (II) evdev: Power Button: Configuring as keyboard
[ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 38.837] (**) Option "xkb_rules" "evdev"
[ 38.837] (**) Option "xkb_model" "evdev"
[ 38.837] (**) Option "xkb_layout" "se"
[ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 38.838] (II) No input driver specified, ignoring this device.
[ 38.838] (II) This device may have been added with another device file.
[ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
[ 38.838] (**) Sleep Button: always reports core events
[ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 38.839] (--) evdev: Sleep Button: Found keys
[ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
[ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 38.839] (**) Option "xkb_rules" "evdev"
[ 38.839] (**) Option "xkb_model" "evdev"
[ 38.839] (**) Option "xkb_layout" "se"
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.842] (**) Logitech USB Receiver: always reports core events
[ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 38.844] (II) No input driver specified, ignoring this device.
[ 38.844] (II) This device may have been added with another device file.
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.844] (**) Logitech USB Receiver: always reports core events
[ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found keys
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 38.845] (**) Option "xkb_rules" "evdev"
[ 38.845] (**) Option "xkb_model" "evdev"
[ 38.845] (**) Option "xkb_layout" "se"
[ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 38.846] (**) USB 2.0 PC Camera: always reports core events
[ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
[ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 38.846] (**) Option "xkb_rules" "evdev"
[ 38.846] (**) Option "xkb_model" "evdev"
[ 38.847] (**) Option "xkb_layout" "se"
[ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
[ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 38.848] (**) Option "xkb_rules" "evdev"
[ 38.848] (**) Option "xkb_model" "evdev"
[ 38.848] (**) Option "xkb_layout" "se"
[ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 38.848] (II) LoadModule: "synaptics"
[ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
[ 38.911] compiled for 1.12.1, module version = 1.6.1
[ 38.911] Module class: X.Org XInput Driver
[ 38.911] ABI class: X.Org XInput driver, version 16.0
[ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.911] (**) Option "Device" "/dev/input/event9"
[ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 38.911] (**) Option "TapButton1" "1"
[ 38.911] (**) Option "TapButton2" "2"
[ 38.911] (**) Option "TapButton3" "3"
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
[ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
The /var/log/Xorg.0.log when using nv:
[ 52.162]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 52.163] X Protocol Version 11, Revision 0
[ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 52.165] Build Date: 30 May 2012 07:24:13PM
[ 52.165]
[ 52.165] Current version of pixman: 0.26.0
[ 52.166] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
[ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
[ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 52.168] (==) No Layout section. Using the first Screen section.
[ 52.168] (==) No screen section available. Using defaults.
[ 52.168] (**) |-->Screen "Default Screen Section" (0)
[ 52.168] (**) | |-->Monitor "<default monitor>"
[ 52.168] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 52.168] (**) | |-->Device "Device0"
[ 52.168] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 52.169] (==) Automatically adding devices
[ 52.169] (==) Automatically enabling devices
[ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 52.169] Entry deleted from font path.
[ 52.169] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 52.169] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 52.169] (II) Loader magic: 0x7c58e0
[ 52.169] (II) Module ABI versions:
[ 52.169] X.Org ANSI C Emulation: 0.4
[ 52.169] X.Org Video Driver: 12.0
[ 52.169] X.Org XInput driver : 16.0
[ 52.169] X.Org Server Extension : 6.0
[ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
[ 52.170] (II) LoadModule: "extmod"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 52.170] (II) Module extmod: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension MIT-SCREEN-SAVER
[ 52.170] (II) Loading extension XFree86-VidModeExtension
[ 52.170] (II) Loading extension XFree86-DGA
[ 52.170] (II) Loading extension DPMS
[ 52.170] (II) Loading extension XVideo
[ 52.170] (II) Loading extension XVideo-MotionCompensation
[ 52.170] (II) Loading extension X-Resource
[ 52.170] (II) LoadModule: "dbe"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 52.170] (II) Module dbe: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension DOUBLE-BUFFER
[ 52.170] (II) LoadModule: "glx"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
[ 52.180] compiled for 4.0.2, module version = 1.0.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 52.180] (II) Loading extension GLX
[ 52.180] (II) LoadModule: "record"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 52.180] (II) Module record: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.13.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension RECORD
[ 52.180] (II) LoadModule: "dri"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 52.180] (II) Module dri: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.0.0
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension XFree86-DRI
[ 52.180] (II) LoadModule: "dri2"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 52.181] (II) Module dri2: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.2, module version = 1.2.0
[ 52.181] ABI class: X.Org Server Extension, version 6.0
[ 52.181] (II) Loading extension DRI2
[ 52.181] (II) LoadModule: "nv"
[ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 52.181] (II) Module nv: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.0.901, module version = 2.1.18
[ 52.181] Module class: X.Org Video Driver
[ 52.181] ABI class: X.Org Video Driver, version 12.0
[ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 52.183] (--) using VT number 7
[ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
[ 52.211] (II) Loading sub module "int10"
[ 52.211] (II) LoadModule: "int10"
[ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 52.233] (II) Module int10: vendor="X.Org Foundation"
[ 52.233] compiled for 1.12.2, module version = 1.0.0
[ 52.233] ABI class: X.Org Video Driver, version 12.0
[ 52.233] (II) NV(0): Initializing int10
[ 52.234] (II) NV(0): Bad V_BIOS checksum
[ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
[ 52.234] (--) NV(0): Console is VGA mode 0x105
[ 52.234] (II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[ 52.234] (==) NV(0): RGB weight 888
[ 52.234] (==) NV(0): Default visual is TrueColor
[ 52.235] (==) NV(0): Using hardware cursor
[ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
[ 52.245] (--) NV(0): Total video RAM: 512.0 MB
[ 52.245] (--) NV(0): BAR1 size: 256.0 MB
[ 52.245] (--) NV(0): Mapped memory: 256.0 MB
[ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
[ 52.317] (II) Loading sub module "i2c"
[ 52.317] (II) LoadModule: "i2c"
[ 52.317] (II) Module "i2c" already built-in
[ 52.317] (II) Loading sub module "ddc"
[ 52.317] (II) LoadModule: "ddc"
[ 52.317] (II) Module "ddc" already built-in
[ 52.317] (--) NV(0): Connector map:
[ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
[ 52.317] (--) NV(0): Bus 0 -> DAC1
[ 52.317] (--) NV(0): Bus 8 -> SOR3
[ 52.317] (--) NV(0): Load detection: 340
[ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
[ 52.317] (II) NV(0): Output VGA1 has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
[ 52.317] (II) NV(0): Output DVI3 has no monitor section
[ 52.317] (II) NV(0): LVDS native size 1366x768
[ 52.317] (II) NV(0): Output LVDS has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
[ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
[ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
[ 52.321] (II) NV(0): ... none found
[ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
[ 52.366] (II) NV(0): EDID for output VGA1
[ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
[ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
[ 52.370] (II) NV(0): ... none found
[ 52.370] (II) NV(0): EDID for output DVI3
[ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
[ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
[ 52.422] (--) NV(0): DDC detected a DFP:
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID for output LVDS
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
[ 52.422] (II) NV(0): Printing probed modes for output LVDS
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (II) NV(0): Output VGA1 disconnected
[ 52.422] (II) NV(0): Output DVI3 disconnected
[ 52.422] (II) NV(0): Output LVDS connected
[ 52.422] (II) NV(0): Using exact sizes for initial modes
[ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
[ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
[ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (==) NV(0): DPI set to (96, 96)
[ 52.422] (II) Loading sub module "fb"
[ 52.422] (II) LoadModule: "fb"
[ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 52.447] (II) Module fb: vendor="X.Org Foundation"
[ 52.447] compiled for 1.12.2, module version = 1.0.0
[ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
[ 52.447] (II) Loading sub module "xaa"
[ 52.447] (II) LoadModule: "xaa"
[ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 52.458] (II) Module xaa: vendor="X.Org Foundation"
[ 52.458] compiled for 1.12.2, module version = 1.2.1
[ 52.458] ABI class: X.Org Video Driver, version 12.0
[ 52.458] (II) Loading sub module "ramdac"
[ 52.458] (II) LoadModule: "ramdac"
[ 52.458] (II) Module "ramdac" already built-in
[ 52.458] (--) Depth 24 pixmap format is 32 bpp
[ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
[ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
[ 52.507] Screen to screen bit blits
[ 52.507] Solid filled rectangles
[ 52.507] 8x8 mono pattern filled rectangles
[ 52.507] Indirect CPU to Screen color expansion
[ 52.507] Solid Lines
[ 52.507] Scanline Image Writes
[ 52.508] Setting up tile and stipple cache:
[ 52.508] 32 128x128 slots
[ 52.508] 32 256x256 slots
[ 52.508] 16 512x512 slots
[ 52.508] (==) NV(0): Backing store disabled
[ 52.508] (==) NV(0): Silken mouse enabled
[ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 52.508] (==) NV(0): DPMS enabled
[ 55.081] (--) RandR disabled
[ 55.081] (II) Initializing built-in extension Generic Event Extension
[ 55.081] (II) Initializing built-in extension SHAPE
[ 55.081] (II) Initializing built-in extension MIT-SHM
[ 55.081] (II) Initializing built-in extension XInputExtension
[ 55.081] (II) Initializing built-in extension XTEST
[ 55.081] (II) Initializing built-in extension BIG-REQUESTS
[ 55.081] (II) Initializing built-in extension SYNC
[ 55.081] (II) Initializing built-in extension XKEYBOARD
[ 55.081] (II) Initializing built-in extension XC-MISC
[ 55.081] (II) Initializing built-in extension SECURITY
[ 55.081] (II) Initializing built-in extension XINERAMA
[ 55.081] (II) Initializing built-in extension XFIXES
[ 55.081] (II) Initializing built-in extension RENDER
[ 55.081] (II) Initializing built-in extension RANDR
[ 55.081] (II) Initializing built-in extension COMPOSITE
[ 55.081] (II) Initializing built-in extension DAMAGE
[ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
[ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.715] (II) LoadModule: "evdev"
[ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 55.725] (II) Module evdev: vendor="X.Org Foundation"
[ 55.725] compiled for 1.12.0, module version = 2.7.0
[ 55.725] Module class: X.Org XInput Driver
[ 55.725] ABI class: X.Org XInput driver, version 16.0
[ 55.725] (II) Using input driver 'evdev' for 'Power Button'
[ 55.725] (**) Power Button: always reports core events
[ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.725] (--) evdev: Power Button: Found keys
[ 55.725] (II) evdev: Power Button: Configuring as keyboard
[ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 55.725] (**) Option "xkb_rules" "evdev"
[ 55.725] (**) Option "xkb_model" "evdev"
[ 55.725] (**) Option "xkb_layout" "se"
[ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
[ 55.918] (**) Video Bus: always reports core events
[ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 55.918] (--) evdev: Video Bus: Found keys
[ 55.918] (II) evdev: Video Bus: Configuring as keyboard
[ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 55.918] (**) Option "xkb_rules" "evdev"
[ 55.918] (**) Option "xkb_model" "evdev"
[ 55.918] (**) Option "xkb_layout" "se"
[ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.919] (II) Using input driver 'evdev' for 'Power Button'
[ 55.919] (**) Power Button: always reports core events
[ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.919] (--) evdev: Power Button: Found keys
[ 55.919] (II) evdev: Power Button: Configuring as keyboard
[ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 55.919] (**) Option "xkb_rules" "evdev"
[ 55.919] (**) Option "xkb_model" "evdev"
[ 55.919] (**) Option "xkb_layout" "se"
[ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 55.920] (II) No input driver specified, ignoring this device.
[ 55.920] (II) This device may have been added with another device file.
[ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
[ 55.921] (**) Sleep Button: always reports core events
[ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 55.921] (--) evdev: Sleep Button: Found keys
[ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
[ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 55.921] (**) Option "xkb_rules" "evdev"
[ 55.921] (**) Option "xkb_model" "evdev"
[ 55.921] (**) Option "xkb_layout" "se"
[ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 55.922] (II) No input driver specified, ignoring this device.
[ 55.922] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 55.924] (II) No input driver specified, ignoring this device.
[ 55.924] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.924] (**) Logitech USB Receiver: always reports core events
[ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 55.926] (II) No input driver specified, ignoring this device.
[ 55.926] (II) This device may have been added with another device file.
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.927] (**) Logitech USB Receiver: always reports core events
[ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found keys
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 55.927] (**) USB 2.0 PC Camera: always reports core events
[ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
[ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
[ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 55.929] (**) Option "xkb_rules" "evdev"
[ 55.929] (**) Option "xkb_model" "evdev"
[ 55.929] (**) Option "xkb_layout" "se"
[ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 55.929] (II) LoadModule: "synaptics"
[ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
[ 55.967] compiled for 1.12.1, module version = 1.6.1
[ 55.967] Module class: X.Org XInput Driver
[ 55.967] ABI class: X.Org XInput driver, version 16.0
[ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.967] (**) Option "Device" "/dev/input/event9"
[ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 55.968] (**) Option "TapButton1" "1"
[ 55.968] (**) Option "TapButton2" "2"
[ 55.968] (**) Option "TapButton3" "3"
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 55.969] (II) No input driver specified, ignoring this device.
[ 55.969] (II) This device may have been added with another device file.
[ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 55.970] (II) No input driver specified, ignoring this device.
[ 55.970] (II) This device may have been added with another device file.
From what I can tell it is something with the nvidia driver that doesn't play well with xorg. Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
Last edited by Larsson (2012-06-13 18:59:43)Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or NV-GLX that slows it down. Any suggestions on how I can speed this up?
ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM. But I don't think this is the problem? -
Some Apps don't start up anymore after upgrading to BB 10.2.1
I have upgraded to BB 10.2.1 today and am pleased to see new features and enhancements.
I also have to report a few issues though:
- startup takes much longer now
- several non native apps don't start up anymore. I even reinstalled some, but that didn't help. Any thoughts?have you tried using Snap?
http://supportforums.blackberry.com/t5/Downloaded-Applications-for/You-Upgraded-to-OS-10-2-1-and-wan...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
[SOLVED - partly] Minidlna won't start on boot, but OK otherwise
I am using an up-to-date system as of 2012-11-13. The problem is that minidlna fails to start on boot:
minidlna.service - minidlna server
Loaded: loaded (/usr/lib/systemd/system/minidlna.service; enabled)
Active: failed (Result: exit-code) since Tue, 2012-11-13 07:53:55 CET; 1h 33min ago
Process: 401 ExecStart=/usr/sbin/minidlna -P /var/run/minidlna/minidlna.pid (code=exited, status=255)
CGroup: name=systemd:/system/minidlna.service
Nov 13 07:53:59 earth minidlna[401]: [2012/11/13 07:53:54] minidlna.c:754: fatal: No IP address automatically detected!
So I guess it has to do something with the network, I am using DHCP, with systemd + net-auto-wired.service.
I have found this: https://ask.fedoraproject.org/question/ … r-dhcp-has
They have solved the problem by changing the after part in the unit by adding: dbus-org.freedesktop.NetworkManager.target
Since I do not use networkmanager, this is not an option for me. The current, unmanipulated state of the minidlna unit is:
[Unit]
Description=minidlna server
After=network.target
[Service]
Type=forking
User=nobody
ExecStart=/usr/sbin/minidlna -P /var/run/minidlna/minidlna.pid
PIDFile=/var/run/minidlna/minidlna.pid
[Install]
WantedBy=multi-user.target
What I have noticed is that it refers to a network.target in the after section, but it seems to me that I don't have one.
I only have:
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
12 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Edit: having run the command again with the --all prefix:
Notice: network.target loaded inactive dead Network
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded inactive dead Network
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs.target loaded active active Remote File Systems
rescue.target loaded inactive dead Rescue Mode
shutdown.target loaded inactive dead Shutdown
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded inactive dead Syslog
umount.target loaded inactive dead Unmount All Filesystems
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
21 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.
My question is what should I add to the after part to make minidlna work upon booting? Wouldn't a graphical.target be an overkill?
Thanks in advance.
Last edited by szebenyib (2012-12-02 16:45:26)szebenyib wrote:(However I cannot access the internet that way, maybe because of a bad network file. Honestly I have some space to improve my network knowledge.)
In the case of the possible bad network file. here is what it expects. First, you need to know the router's IP address. In the following I will assume 192.168.0.1 for the router's IP address.
192.168.0.1 is common for D-Link routers, but it does vary by router manufacturer and model. I believe 192.168.1.1 is common for Linksys.
/etc/conf.d/network
interface=eth0 # ethernet port to activate, usually eth0
address=192.168.0.110 # IP address you want the minidlna computer to have. the first 3 triads must be the same as the router's IP addr in this case 192.168.0 the fourth triad can be from 5 to 250
netmask=24
broadcast=192.168.0.255 # the first 3 triads must be the same as the router's IP address and the fourth triad should be 255
gateway=192.168.0.1 # the IP address of your router
In a terminal window, enter:
systemctl restart network.service
ping -c5 127.0.0.1
which is localhost. The -c5 means ping 5 times then quit. If you get: 5 packets transmitted, 5 received, 0% packet loss then the ping was successful, which means
that the ethernet port (usually eth0) is active. If this ping is not successful, go back and check the syntax and spelling in both /etc/conf.d/network and /etc/systemd/system/network.service
If the ping is successful:
ping -c5 192.168.0.1
and ping the router.
If you cannot ping the router's IP address, then there is still something wrong in one of the two involved files. or the router's settings need to be changed.
If you can ping the router's IP address successfully and still cannot get to the internet, you probably have DNS server issues.
ping -c5 google.com
ping -c5 8.8.8.8
If you cannot ping google.com but can ping 8.8.8.8 then you have DNS problems, see Arch WIKI resolv.conf
My network is a mixture of DHCP and STATIC IP addresses. In my router, I have the DHCP server enabled to give IP addresses between 192.168.0.10 and 192.168.0.60
this gives the router 50 DHCP addresses to work with which is more that enough for my home network. The rest of the addresses between 192.168.0.61 and 192.168.0.250
can be used as static addresses. Just an example, this can be changed as necessary.
HTH
Pudge -
Notebook Toshiba L40 don't start when unplug power cable
When i unplug power cable system don't start and crash on login KDE or faster. When power cable is plug everything is ok. Tested on Kubuntu 9.04, Windows Vista and works ok. On Kubuntu 9.10 alpha 5 i have the same problem.
Sorry for my englishHello AmlnnN,
I understand have you finished doing a little maintenance work on the computer it now freezes periodically is that correct? I will do all I can to help you resolve this issue.
First thing lets run a couple test on some of your hardware.
See steps below:
1. I want you to boot into the bios menu this link will show you how.
2. Once in bios go over to the diagnostic option at the top.(Note you will need to use the arrow keys to navigate)
3. You may see 2 test there if that is the case run both test.
4. It may take some time so please have the ac adapter plugged in.
5. Once the test finished press F9 to setup defaults and then press F10 to save and exit.
Also find out while you’re in the bios if the computer ever freezes there.
Pleas respond back with your results at your earliest convenience.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
[SOLVED] systemd : services failing to start on boot
I have removed sysvinit completely as per the systemd wiki pages.
I don't usually re-boot very often so I'm not sure exactly when the problem started.
I only noticed this problem about 4 or 5 days ago.
But now whenever I reboot my machine 2 services fail consistently.
adsl.service
colord.service
They both start flawlessly once I can log in at a console.
I'm using kde and in the last couple of days, while trying to fix my problem, the kdm service has failed to start a couple of times too - saying there is no X server.
Before switching to systemd I never had any of these problems using the old rc.conf method. My DAEMONS array had the adsl service start after the network service.
I need some help and advice to find out what is causing the problem and how to fix it.
Last edited by bhrgunatha (2012-10-25 05:44:22)Thanks. That seems plausible. So I've been snooping at the journal.
journalctl -ab
Oct 25 17:06:13 starch systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Oct 25 17:06:14 starch systemd[1]: Started Recreate Volatile Files and Directories.
Oct 25 17:06:14 starch systemd[1]: Starting System Initialization.
Oct 25 17:06:14 starch systemd[1]: Reached target System Initialization.
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Listening on CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Starting Console System Startup Logging...
Oct 25 17:06:14 starch systemd[1]: Starting Restore Sound Card State...
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Started CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Starting D-Bus System Message Bus Socket.
Oct 25 17:06:16 starch ntpd[381]: ntpd [email protected] Tue Aug 21 15:06:24 UTC 2012 (1)
Oct 25 17:06:16 starch ntpd[413]: proto: precision = 0.156 usec
Oct 25 17:06:17 starch ntpd[413]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Oct 25 17:06:17 starch ntpd[413]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen and drop on 1 v6wildcard :: UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 2 lo 127.0.0.1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 3 lo ::1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: peers refreshed
Oct 25 17:06:18 starch ntpd[413]: Listening on routing socket on fd #20 for interface updates
Oct 25 17:06:18 starch dbus[384]: [system] Activating systemd to hand-off: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:06:18 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:03 starch dbus[384]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:03 starch systemd[1]: Starting Manage, Install and Generate Color Profiles...
Oct 25 17:07:03 starch systemd[1]: Started Manage, Install and Generate Color Profiles.
Oct 25 17:07:03 starch systemd[1]: colord.service: main process exited, code=killed, status=6
Oct 25 17:07:03 starch systemd[1]: Unit colord.service entered failed state.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 17:07:04 starch kernel: PPP generic driver version 2.4.2
Oct 25 17:07:04 starch cupsd[380]: Unknown directive DefaultAuthType on line 26.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link up
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 25 17:07:04 starch pppoe-start[382]: TIMED OUT
Oct 25 17:07:04 starch kernel: NET: Registered protocol family 24
Oct 25 17:07:04 starch pppoe-start[382]: /usr/sbin/pppoe-start: line 193: 394 Terminated $CONNECT "$@" > /dev/null 2>&1
That seems to confirm your theory.
eth0 link is not up when attempting to start colord and adsl
So the $64,000 question:
How do I defer them until eth0 is ready?
Or how can I force the eth0 link to be up before colord or adsl try to use it?
Last edited by bhrgunatha (2012-10-25 01:33:36) -
[solved] systemd services not starting at boot (or at all)
On my router, some systemd services fail to start at boot.
The services are :
adsl (pppoe connetction on the wan interface)
shorewall (funny again for a router)
logind (brings up only tty1, and not the others with a 'timeout' error)
adsl starts fine manually after booting up
the others don't work, I have to launch shorewall with the old sysvinit rc script (and it works)
I really don't know, what happened to logind...
Last edited by scar (2012-11-30 10:20:44)cups: avahi client failed
adsl: timeout (ppp0 running on eth0, the service did not found eth0)
shorewall: did not work by the systemctl command, only with the old rc script
I'm not sure if there was an error with logind, but I've had only tty1, not all the others (I have not touched /etc/inittab)
since this was a very old install (but up to date), I've decided to reinstall the whole thing,
Everything works
(But reinstalling does not solve any problem, it erases the problems...)
Last edited by scar (2012-11-30 10:21:20) -
Itunes don't start (First installation)
Hello,
French user in enterprise ... we have a 60 iPhones and we want to install Itunes on PC of the User.
PC are under Windows 7 Prof. and in a domain.
Installation on the User domain account = OK but launch Itunes = 50% OK and Other KO (Itunes never start)
if KO : under session domain admin = itunes start OK ; under session Local admin = itunes start Ok
We declare the domain User as Admin local and iTunes Dont't Start (again)
When I tell don't start, no msg of erreur, no process in the process list in the monitor.
We try to install the Setup (x64) as administrator (right clic) => launch setup = install OK
Same bug when we want to start itunes since the user domain account.
We can't change the user account.
We 're thinking there is authorization problem but we can't find where.
All we found on forum and else aren't solve the bug.
A fix ? A link ? to help use ... we have 10 PC whith the start bug and we are near the suicidResolve
We found bad directory redirection for "documents" on domain GPO (redirection on a old server).
We :
* change the bad value in the GPO.
* restart the PC and login with the domain user account. GPO apply correctly.
* launch iTunes and ... miracle ... Itunes Start correctly.
No thanks to Apple, because:
* no error message,
* no information for bad directory to create iTunes directory in "my music",
* no question to write/declare a new location cause of error create iTunes directory for the media bank
* just close Itunes on the error without information and 6 hours loose in search for the cause.
Thanks to fromsouth to the search way.
See you soon
Maybe you are looking for
-
USB Device not recognized by windows
When I first plugged my iPod into my computer, it went through the whole recognizing new hardware thing. Installed the drivers, then said that the new device was ready to use. But then I get a message that says "Device malfunction, device not recogni
-
Error while posting payroll results to FI
Hi, I am running India Payroll on ECC 6.0. I am getting the following error while generating simulation document through Posting Run. Error in document: HRPAY 0000000060 WPRCLNT100 Text Not Found. Message Number: ZKV 000 Variable: Payroll run is succ
-
Mapping issue with mapWithDefault
Well i am a liitle confused: i have following mapping for target field: /MT_NC_ART_edit/ARTRecordSet/ARTDetailsStruct/sAfoBez=replaceString(oneToMany(concat([delimeter=]/ZBC14_ARTIKEL/IDOC/ZBC14_ARTIKEL/ZBC14_ARTIKEL_VORNR/SAFOBEZ=, const([value=:]))
-
help please
-
Why does my new iPod 4 download so slow?
I just bought it and it first downloaded really quick, now it takes 20 minutes to download 22 mb. PLEASE HELP!