[Solved] Artifacts with ATI Radeon HD 6670 and open source driver
Hey folks,
I use the xf86-video-ati driver and have a lot of artifacts on my screen.
Here my Xorg and dmesg log:
Dmesg: http://pastebin.com/AF8AmJfP
Xorg: http://pastebin.com/8rnQS0sa
My kernel version: 3.8.8-2-ARCH
My /etc/X11/xorg.conf.d/20-radeon.conf:
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "EXAPixmaps" "off"
Option "AccelDFS" "off"
EndSection
I tried to use the linux-lts kernel and the mesa-git repository but nothing happend...
KMS is enabled, if I disable it Xorg only works with vesa but very slow and with a bad resolution.
All other framebuffers devices are disabled.
I hope someone can help me...
Last edited by Gorentill (2013-04-27 21:09:26)
Yes I have...no changes...
I could use the ati catalyst driver to solve this problem but I hate this slow driver.
EDIT:
I also have artifacts on my virtual console...
Last edited by Gorentill (2013-04-27 12:51:19)
Similar Messages
-
Crash with ATI Radeon X1900 XT and second HD display (DVI) ?
hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.tAre you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page. -
Black screen on startx with ati radeon HD4330 Mobility and fglrx
Hi,
I managed to install Archlinux on my HP Butterfly laptop that's great !
However I am not able to get X running properly.
lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series]
Firstly I tried to use the xf86-video-ati open source driver but it made my kernel crash during the module init.
So I am now trying fglrx, and at least my kernel is unharmed.
But all I get is a black screen after running startx.
Here is my X log :
[ 95.354]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 95.354] X Protocol Version 11, Revision 0
[ 95.354] Build Operating System: Linux 2.6.35-ARCH i686
[ 95.354] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Mon Jan 24 18:34:55 UTC 2011 i686
[ 95.355] Kernel command line: root=/dev/sda7 ro nomodeset
[ 95.355] Build Date: 01 November 2010 10:35:30PM
[ 95.355]
[ 95.362] Current version of pixman: 0.20.2
[ 95.363] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 95.363] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 95.364] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 9 20:52:31 2011
[ 95.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 95.408] (==) ServerLayout "aticonfig Layout"
[ 95.408] (**) |-->Screen "base-screen" (0)
[ 95.408] (**) | |-->Monitor "native-monitor"
[ 95.408] (**) | |-->Device "radeon-4330HD"
[ 95.408] (==) Automatically adding devices
[ 95.408] (==) Automatically enabling devices
[ 95.467] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 95.467] Entry deleted from font path.
[ 95.467] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 95.467] Entry deleted from font path.
[ 95.489] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 95.489] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 95.489] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 95.489] (II) Loader magic: 0x81f1f80
[ 95.489] (II) Module ABI versions:
[ 95.490] X.Org ANSI C Emulation: 0.4
[ 95.490] X.Org Video Driver: 8.0
[ 95.490] X.Org XInput driver : 11.0
[ 95.490] X.Org Server Extension : 4.0
[ 95.491] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0281 rev 7, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004110/8
[ 95.491] (--) PCI: (0:1:0:0) 1002:9552:1025:0281 rev 0, Mem @ 0xd0000000/268435456, 0xf4400000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 95.491] (II) Open ACPI successful (/var/run/acpid.socket)
[ 95.491] (II) "extmod" will be loaded by default.
[ 95.491] (II) "dbe" will be loaded by default.
[ 95.491] (II) "glx" will be loaded by default.
[ 95.491] (II) "record" will be loaded by default.
[ 95.492] (II) "dri" will be loaded by default.
[ 95.492] (II) "dri2" will be loaded by default.
[ 95.492] (II) LoadModule: "extmod"
[ 95.492] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 95.506] (II) Module extmod: vendor="X.Org Foundation"
[ 95.506] compiled for 1.9.2, module version = 1.0.0
[ 95.506] Module class: X.Org Server Extension
[ 95.506] ABI class: X.Org Server Extension, version 4.0
[ 95.506] (II) Loading extension MIT-SCREEN-SAVER
[ 95.506] (II) Loading extension XFree86-VidModeExtension
[ 95.506] (II) Loading extension XFree86-DGA
[ 95.506] (II) Loading extension DPMS
[ 95.506] (II) Loading extension XVideo
[ 95.506] (II) Loading extension XVideo-MotionCompensation
[ 95.506] (II) Loading extension X-Resource
[ 95.506] (II) LoadModule: "dbe"
[ 95.506] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 95.509] (II) Module dbe: vendor="X.Org Foundation"
[ 95.509] compiled for 1.9.2, module version = 1.0.0
[ 95.509] Module class: X.Org Server Extension
[ 95.509] ABI class: X.Org Server Extension, version 4.0
[ 95.509] (II) Loading extension DOUBLE-BUFFER
[ 95.509] (II) LoadModule: "glx"
[ 95.510] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 95.528] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 95.528] compiled for 7.6.0, module version = 1.0.0
[ 95.529] (II) Loading extension GLX
[ 95.529] (II) LoadModule: "record"
[ 95.529] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 95.529] (II) Module record: vendor="X.Org Foundation"
[ 95.529] compiled for 1.9.2, module version = 1.13.0
[ 95.529] Module class: X.Org Server Extension
[ 95.529] ABI class: X.Org Server Extension, version 4.0
[ 95.529] (II) Loading extension RECORD
[ 95.529] (II) LoadModule: "dri"
[ 95.530] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 95.535] (II) Module dri: vendor="X.Org Foundation"
[ 95.535] compiled for 1.9.2, module version = 1.0.0
[ 95.535] ABI class: X.Org Server Extension, version 4.0
[ 95.535] (II) Loading extension XFree86-DRI
[ 95.535] (II) LoadModule: "dri2"
[ 95.535] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 95.536] (II) Module dri2: vendor="X.Org Foundation"
[ 95.536] compiled for 1.9.2, module version = 1.2.0
[ 95.536] ABI class: X.Org Server Extension, version 4.0
[ 95.536] (II) Loading extension DRI2
[ 95.536] (II) LoadModule: "fglrx"
[ 95.536] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 95.719] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 95.731] compiled for 1.4.99.906, module version = 8.81.5
[ 95.731] Module class: X.Org Video Driver
[ 95.736] (II) Loading sub module "fglrxdrm"
[ 95.736] (II) LoadModule: "fglrxdrm"
[ 95.736] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 95.765] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 95.765] compiled for 1.4.99.906, module version = 8.81.5
[ 95.765] (II) ATI Proprietary Linux Driver Version Identifier:8.81.5
[ 95.765] (II) ATI Proprietary Linux Driver Release Identifier: 8.812
[ 95.765] (II) ATI Proprietary Linux Driver Build Date: Jan 4 2011 21:30:56
[ 95.765] (--) using VT number 7
[ 95.767] (WW) Falling back to old probe method for fglrx
[ 95.852] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 95.861] (--) Chipset Supported AMD Graphics Processor (0x9552) found
[ 95.862] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 95.862] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 95.871] (II) AMD Video driver is signed
[ 95.871] (II) fglrx(0): pEnt->device->identifier=0x8f63678
[ 95.872] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 95.873] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 95.873] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 95.873] (==) fglrx(0): Default visual is TrueColor
[ 95.873] (**) fglrx(0): Option "DPMS" "true"
[ 95.873] (==) fglrx(0): RGB weight 888
[ 95.873] (II) fglrx(0): Using 8 bits per RGB
[ 95.873] (==) fglrx(0): Buffer Tiling is ON
[ 95.874] (II) Loading sub module "fglrxdrm"
[ 95.874] (II) LoadModule: "fglrxdrm"
[ 95.874] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 95.876] ukiDynamicMajor: found major device number 252
[ 95.876] ukiDynamicMajor: found major device number 252
[ 95.876] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 95.876] ukiOpenDevice: node name is /dev/ati/card0
[ 95.876] ukiOpenDevice: open result is 11, (OK)
[ 95.876] ukiOpenByBusid: ukiOpenMinor returns 11
[ 95.876] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 95.876] (==) fglrx(0): NoAccel = NO
[ 95.876] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 95.876] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4300 Series" (Chipset = 0x9552)
[ 95.876] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0281)
[ 95.876] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 95.876] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 95.876] (--) fglrx(0): MMIO registers at 0xf4400000
[ 95.876] (--) fglrx(0): I/O port at 0x00003000
[ 95.877] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 95.889] (II) fglrx(0): AC Adapter is used
[ 96.174] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 96.174] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 96.174] (II) fglrx(0): PCIE card detected
[ 96.174] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 96.174] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 96.180] (II) fglrx(0): Using adapter: 1:0.0.
[ 96.224] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 96.453] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 96.453] (II) fglrx(0): RandR 1.2 support is enabled!
[ 96.453] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 96.453] (==) fglrx(0): Center Mode is disabled
[ 96.453] (II) Loading sub module "fb"
[ 96.453] (II) LoadModule: "fb"
[ 96.454] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 96.475] (II) Module fb: vendor="X.Org Foundation"
[ 96.475] compiled for 1.9.2, module version = 1.0.0
[ 96.475] ABI class: X.Org ANSI C Emulation, version 0.4
[ 96.475] (II) Loading sub module "ddc"
[ 96.475] (II) LoadModule: "ddc"
[ 96.475] (II) Module "ddc" already built-in
[ 96.725] (II) fglrx(0): Finished Initialize PPLIB!
[ 96.773] (II) fglrx(0): Output LVDS using monitor section native-monitor
[ 96.773] (II) fglrx(0): Output DFP1 has no monitor section
[ 96.773] (II) fglrx(0): Output CRT1 has no monitor section
[ 96.785] (II) Loading sub module "ddc"
[ 96.785] (II) LoadModule: "ddc"
[ 96.786] (II) Module "ddc" already built-in
[ 96.786] (II) fglrx(0): Connected Display0: LVDS
[ 96.786] (II) fglrx(0): Display0: Failed to get EDID information.
[ 96.862] (II) fglrx(0): Cannot get EDID information for LVDS
[ 96.862] (II) fglrx(0): EDID for output LVDS
[ 96.862] (II) fglrx(0): Not using mode "640x350" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x400" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "720x400" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "848x480" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1024x768i" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1152x864" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (monitor doesn't support reduced blanking)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1360x768" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1360x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Printing probed modes for output LVDS
[ 96.881] (II) fglrx(0): Modeline "1366x768"x60.0 69.50 1366 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1280x768"x60.0 69.50 1280 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1280x720"x60.0 69.50 1280 1414 1446 1466 720 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1024x768"x60.0 69.50 1024 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1024x600"x60.0 69.50 1024 1414 1446 1466 600 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "800x600"x60.0 69.50 800 1414 1446 1466 600 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "800x480"x60.0 69.50 800 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "720x480"x60.0 69.50 720 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "640x480"x60.0 69.50 640 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): EDID for output DFP1
[ 96.881] (II) fglrx(0): EDID for output CRT1
[ 96.881] (II) fglrx(0): Output LVDS connected
[ 96.881] (II) fglrx(0): Output DFP1 disconnected
[ 96.882] (II) fglrx(0): Output CRT1 disconnected
[ 96.882] (II) fglrx(0): Using exact sizes for initial modes
[ 96.882] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 96.882] (II) fglrx(0): DPI set to (96, 96)
[ 96.882] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4300 Series has 2 configurable heads and 1 displays connected.
[ 96.882] (==) fglrx(0): PseudoColor visuals disabled
[ 96.882] (II) Loading sub module "ramdac"
[ 96.882] (II) LoadModule: "ramdac"
[ 96.882] (II) Module "ramdac" already built-in
[ 96.882] (==) fglrx(0): NoDRI = NO
[ 96.882] (==) fglrx(0): Capabilities: 0x00000000
[ 96.882] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 96.882] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 96.882] (==) fglrx(0): UseFastTLS=0
[ 96.882] (==) fglrx(0): BlockSignalsOnLock=1
[ 96.882] (--) Depth 24 pixmap format is 32 bpp
[ 96.882] (II) Loading extension ATIFGLRXDRI
[ 96.882] (II) fglrx(0): doing swlDriScreenInit
[ 96.882] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 96.882] ukiDynamicMajor: found major device number 252
[ 96.882] ukiDynamicMajor: found major device number 252
[ 96.883] ukiDynamicMajor: found major device number 252
[ 96.883] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 96.883] ukiOpenDevice: node name is /dev/ati/card0
[ 96.883] ukiOpenDevice: open result is 12, (OK)
[ 96.883] ukiOpenByBusid: ukiOpenMinor returns 12
[ 96.883] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 96.883] (II) fglrx(0): [uki] DRM interface version 1.0
[ 96.883] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 96.883] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 96.883] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb76f0000
[ 96.883] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 96.883] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 96.883] (II) fglrx(0): swlDriScreenInit done
[ 96.883] (II) fglrx(0): Kernel Module Version Information:
[ 96.883] (II) fglrx(0): Name: fglrx
[ 96.883] (II) fglrx(0): Version: 8.81.5
[ 96.883] (II) fglrx(0): Date: Jan 4 2011
[ 96.883] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 96.883] (II) fglrx(0): Kernel Module version matches driver.
[ 96.883] (II) fglrx(0): Kernel Module Build Time Information:
[ 96.883] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-ARCH
[ 96.883] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 96.883] (II) fglrx(0): Build-Kernel __SMP__: no
[ 96.883] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 96.883] (II) fglrx(0): [uki] register handle = 0x00004000
[ 96.922] (II) fglrx(0): DRI initialization successfull
[ 96.922] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 96.933] (==) fglrx(0): Backing store disabled
[ 96.933] (II) Loading extension FGLRXEXTENSION
[ 96.933] (**) fglrx(0): DPMS enabled
[ 96.934] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 96.934] (**) fglrx(0): Textured Video is enabled.
[ 96.934] (II) LoadModule: "glesx"
[ 96.944] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 97.061] (II) Module glesx: vendor="X.Org Foundation"
[ 97.062] compiled for 1.4.99.906, module version = 1.0.0
[ 97.062] (II) Loading extension GLESX
[ 97.062] (II) fglrx(0): GLESX enableFlags = 528
[ 97.062] (II) fglrx(0): GLESX is enabled
[ 97.062] (II) LoadModule: "amdxmm"
[ 97.062] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 97.072] (II) Module amdxmm: vendor="X.Org Foundation"
[ 97.072] compiled for 1.4.99.906, module version = 2.0.0
[ 97.072] (II) Loading extension AMDXVOPL
[ 97.072] (II) Loading extension AMDXVBA
[ 97.091] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 97.094] (II) fglrx(0): Enable composite support successfully
[ 97.094] (WW) fglrx(0): Option "VendorName" is not used
[ 97.094] (WW) fglrx(0): Option "ModelName" is not used
[ 97.094] (II) fglrx(0): X context handle = 0x1
[ 97.094] (II) fglrx(0): [DRI] installation complete
[ 97.094] (==) fglrx(0): Silken mouse enabled
[ 97.101] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 97.101] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 97.101] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 97.101] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 98.234] (--) RandR disabled
[ 98.234] (II) Initializing built-in extension Generic Event Extension
[ 98.234] (II) Initializing built-in extension SHAPE
[ 98.234] (II) Initializing built-in extension MIT-SHM
[ 98.234] (II) Initializing built-in extension XInputExtension
[ 98.234] (II) Initializing built-in extension XTEST
[ 98.234] (II) Initializing built-in extension BIG-REQUESTS
[ 98.234] (II) Initializing built-in extension SYNC
[ 98.234] (II) Initializing built-in extension XKEYBOARD
[ 98.234] (II) Initializing built-in extension XC-MISC
[ 98.234] (II) Initializing built-in extension SECURITY
[ 98.234] (II) Initializing built-in extension XINERAMA
[ 98.234] (II) Initializing built-in extension XFIXES
[ 98.234] (II) Initializing built-in extension RENDER
[ 98.234] (II) Initializing built-in extension RANDR
[ 98.234] (II) Initializing built-in extension COMPOSITE
[ 98.234] (II) Initializing built-in extension DAMAGE
[ 98.240] ukiDynamicMajor: found major device number 252
[ 98.240] ukiDynamicMajor: found major device number 252
[ 98.240] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 98.240] ukiOpenDevice: node name is /dev/ati/card0
[ 98.240] ukiOpenDevice: open result is 13, (OK)
[ 98.240] ukiOpenByBusid: ukiOpenMinor returns 13
[ 98.240] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 98.965] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 99.057] (II) fglrx(0): Enable the clock gating!
[ 99.058] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 99.597] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 99.597] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.597] (II) LoadModule: "evdev"
[ 99.611] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 99.622] (II) Module evdev: vendor="X.Org Foundation"
[ 99.622] compiled for 1.9.0, module version = 2.5.0
[ 99.622] Module class: X.Org XInput Driver
[ 99.622] ABI class: X.Org XInput driver, version 11.0
[ 99.622] (**) Power Button: always reports core events
[ 99.622] (**) Power Button: Device: "/dev/input/event5"
[ 99.630] (--) Power Button: Found keys
[ 99.630] (II) Power Button: Configuring as keyboard
[ 99.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 99.630] (**) Option "xkb_rules" "evdev"
[ 99.630] (**) Option "xkb_model" "evdev"
[ 99.630] (**) Option "xkb_layout" "us"
[ 99.695] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 99.695] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.695] (**) Video Bus: always reports core events
[ 99.695] (**) Video Bus: Device: "/dev/input/event7"
[ 99.703] (--) Video Bus: Found keys
[ 99.703] (II) Video Bus: Configuring as keyboard
[ 99.703] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 99.703] (**) Option "xkb_rules" "evdev"
[ 99.703] (**) Option "xkb_model" "evdev"
[ 99.703] (**) Option "xkb_layout" "us"
[ 99.704] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 99.704] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.704] (**) Video Bus: always reports core events
[ 99.704] (**) Video Bus: Device: "/dev/input/event8"
[ 99.713] (--) Video Bus: Found keys
[ 99.713] (II) Video Bus: Configuring as keyboard
[ 99.713] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 99.713] (**) Option "xkb_rules" "evdev"
[ 99.713] (**) Option "xkb_model" "evdev"
[ 99.713] (**) Option "xkb_layout" "us"
[ 99.731] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 99.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.731] (**) Power Button: always reports core events
[ 99.731] (**) Power Button: Device: "/dev/input/event1"
[ 99.753] (--) Power Button: Found keys
[ 99.753] (II) Power Button: Configuring as keyboard
[ 99.753] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 99.753] (**) Option "xkb_rules" "evdev"
[ 99.753] (**) Option "xkb_model" "evdev"
[ 99.753] (**) Option "xkb_layout" "us"
[ 99.754] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 99.754] (II) No input driver/identifier specified (ignoring)
[ 99.754] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 99.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 99.755] (**) Sleep Button: always reports core events
[ 99.755] (**) Sleep Button: Device: "/dev/input/event4"
[ 99.770] (--) Sleep Button: Found keys
[ 99.770] (II) Sleep Button: Configuring as keyboard
[ 99.770] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 99.770] (**) Option "xkb_rules" "evdev"
[ 99.770] (**) Option "xkb_model" "evdev"
[ 99.770] (**) Option "xkb_layout" "us"
[ 99.773] (II) config/udev: Adding input device HD Video WebCam (/dev/input/event10)
[ 99.773] (**) HD Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 99.773] (**) HD Video WebCam: always reports core events
[ 99.773] (**) HD Video WebCam: Device: "/dev/input/event10"
[ 99.796] (--) HD Video WebCam: Found keys
[ 99.796] (II) HD Video WebCam: Configuring as keyboard
[ 99.796] (II) XINPUT: Adding extended input device "HD Video WebCam" (type: KEYBOARD)
[ 99.796] (**) Option "xkb_rules" "evdev"
[ 99.796] (**) Option "xkb_model" "evdev"
[ 99.796] (**) Option "xkb_layout" "us"
[ 99.797] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 99.798] (II) No input driver/identifier specified (ignoring)
[ 99.806] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 99.806] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 99.806] (**) AT Translated Set 2 keyboard: always reports core events
[ 99.806] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 99.823] (--) AT Translated Set 2 keyboard: Found keys
[ 99.823] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 99.823] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 99.823] (**) Option "xkb_rules" "evdev"
[ 99.823] (**) Option "xkb_model" "evdev"
[ 99.823] (**) Option "xkb_layout" "us"
[ 99.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 99.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 99.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 99.824] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found 10 mouse buttons
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 99.840] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 99.840] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 99.840] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 99.840] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 99.840] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 99.840] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 99.840] (II) No input driver/identifier specified (ignoring)
[ 99.841] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 99.841] (II) No input driver/identifier specified (ignoring)
[ 100.317] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 103.491] (II) fglrx(0): Preparing normal LeaveVT...
[ 103.860] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 103.860] (II) fglrx(0): Backup framebuffer data.
[ 103.860] (II) fglrx(0): Backup complete.
[ 119.766] (II) fglrx(0): Preparing normal EnterVT...
[ 119.766] (II) Open ACPI successful (/var/run/acpid.socket)
[ 119.766] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 120.803] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 121.433] (II) fglrx(0): Hot-plug event occurs on device: 1:0:0
[ 124.299] (II) fglrx(0): Preparing normal LeaveVT...
[ 124.633] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 124.633] (II) fglrx(0): Backup framebuffer data.
[ 124.633] (II) fglrx(0): Backup complete.
All seems normal to me.
Here is my X configuration (/etc/X11/xorg.conf.d/10-monitor.conf) :
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "base-screen" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "native-monitor"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon-4330HD"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "base-screen"
Device "radeon-4330HD"
Monitor "native-monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768_60.00"
EndSubSection
EndSection
I initially wanted to use slim as a login manager but it always complains about not beeing able to connect to any X server.
As a bonus I give you my rc.conf, might be usefull :
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fglrx)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(!eth0 !wlan0)
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.100.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal acpid network !netfs crond !wicd)
I tried those tips Archlinux Catalyst Wiki but it didn't help.
I may be missing something obvious, but I am quite desperate so any help is welcome.
I can give you any other log that would be meaningfull to you.
Thanks for helping Archlinux to spread a little more.i have this problem
lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M93 [Mobility Radeon HD 4500 Series]
when I have install catalyst-utils 11.1 and catalyst-daemons .after rebooting i saw a black screen.
if I install xf86-video-ati occures lots of crash of KWIN plasma desktop .
i want using Catalyst -
ATI Radeon drivers problems (both open-source and proprietary)
Hi 2 All!!
I have a problem with my ATI Radeon 9000-series. The open source drivers (xf86-video-ati) don't work very good for me, my monitor's fresh rate isn't "at-top" and the monitor projection is slightly translated to the right (say 8-12 pixels). So I've tried to build the official drivers with ABS, all is gone successfully, except for some worrying warnings, but I thought that it's normal. I have a customized kernel, build through ABS... So, when I've tried to load the fglrx module it says:
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.27-ARCH/video/fglrx.ko): Cannot allocate memory
Please, help me! My machine is slow, I can't run any OpenGL-accelerated application, even Quake III!!! If you can suggest me how to improve the performance and how to resolve problems with open-source drivers, it also would be very good... Thank you and sorry for my poor English please.I had some problems with installing ATI drivers recently (could not build fglrx module, not even manually, I had to change some installation script), but with latest driver version (8.11 I think) from ati.amd.com was everything fine (I have Radeon 9600 Pro)
Try to do this (and write here the output)
glxinfo | grep vendor
fglrxinfo
In both cases, it should write something like OpenGL...: ATI... if there will be MESA or DRI, that means that you don't have loaded your fglrx module.
If fglrxinfo output will be something like: no permission for...(should be first or second line of the output), then write this somewhere in your xorg.conf:
Section "DRI"
Mode 0666
EndSection
run:
modprobe -a fglrx - and give here the output. If there will be none, run:
lsmod | grep fglrx - to see wheter fglrx module is really loaded in kernel
if you will have no module, you can install one, type:
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ../
sh make_install.sh (as root)
and post any warning or error here at forum, drivers (but not fglrx module) are installed at /usr/share/ati
After installing drivers, you also need to configure your system (notice your system that it's there), commands:
aticonfig --initial (for editing your xorg.conf)
aticonfig --overlay-type=Xv (acceleration support in xorg.conf)
Showing your xorg.conf file here is also good idea, here is mine (sections Device and Screen):
Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection -
Mobility Radeon HD 5000 Series + open source driver = screen flickers
Hello, this is my first post here. I just finished setting up my first arch installation on my laptop and I'm using Xorg + gnome 3 as user interface.
My laptop has two VGA cards, an integrated intel VGA card and a Mobility Radeon HD 5000 Series, so I used vgaswitcheroo to switch to the Mobility Radeon and turned off the intel VGA card.
Now, here's the problem: I want 3d acceleration to play games and such, but the opensource radeon driver is being weird.
Basically, if I use my Mobility Radeon and the opensource driver the lower-center part of the screen flickers when i move windows vertically. It flickers to black in a polygon-like area and the window shadows get all messed up. If i try to start a game that uses 3d acceleration (such as nexuiz) it runs extremely slow (way too slow for this VGA card) and flickers like crazy in the same area and sometimes on the entire screen.
I already tried using the proprietary driver (catalyst) but it doesn't seem to support switchable VGA cards, since it gives me memory segmentation error.
However, if I switch back to the Intel VGA card and use the opensource intel driver, it runs just fine with no flickering and nexuiz runs better (but of course not fast enough since the intel VGA card is crappy)
As you can see here, 3D acceleration seems to be enabled and Xorg doesn't seem to give any major error or warning:
[francesco@mizu ~]$ glxinfo | grep direct
direct rendering: Yes
[francesco@mizu ~]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series]
[francesco@mizu ~]$ cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD: :Off:0000:00:02.0
1:DIS:+:Pwr:0000:01:00.0
[francesco@mizu ~]$ cat /var/log/Xorg.0.log | grep EE
[ 31.675] Current Operating System: Linux mizu 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 20:29:33 CEST 2011 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 31.923] (II) Loading extension MIT-SCREEN-SAVER
[francesco@mizu ~]$ cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 31.819] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 31.841] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 31.842] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 31.843] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 32.447] (WW) RADEON(0): Option "AGPMode" is not used
[ 32.447] (WW) RADEON(0): Option "AGPFastWrite" is not used
[ 32.447] (WW) RADEON(0): Option "DynamicPM" is not used
[ 32.447] (WW) RADEON(0): Option "ClockGating" is not used
[ 32.447] (WW) RADEON(0): Option "DMAForXv" is not used
[ 32.447] (WW) RADEON(0): Option "ScalerWidth" is not used
[ 33.067] (WW) USB Optical Mouse: ignoring absolute axes.
Here's my /etc/X11/10-monitor.conf:
[francesco@mizu ~]$ cat /etc/X11/xorg.conf.d/10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
DisplaySize 361 203
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "AGPMode" "1"
Option "AGPFastWrite" "yes"
Option "DRI" "on"
Option "DynamicPM" "on" # Dynamic powersaving.
Option "ClockGating" "on" # Assisting option for powersaving.
Option "AccelMethod" "EXA" # EXA should fit most cases.
Option "EXAVSync" "on" # EXAVSync is explained above.
Option "DMAForXv" "on" # Forced option in order to enable Xv overlay.
Option "ScalerWidth" "2048" # That should fix some very rare bugs.
Option "EnablePageFlip" "on" # It will not be enabled on R5xx cards.
Option "RenderAccel" "on" # Optional. It should be enabled by default.
Option "AccelDFS" "on" #Optional. See the man page.
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
SubSection "Display"
Depth 24
Modes "1366x768_75.00" #Choose the resolution
EndSubSection
EndSection
And here's my custom rc.local to switch to my Mobility Radeon VGA card:
[francesco@mizu ~]$ cat /etc/rc.local
#!/bin/bash
# /etc/rc.local: Local multi-user startup script.
sleep 10
# Disable Intel VGA
mount -t debugfs none /sys/kernel/debug
echo DDIS > /sys/kernel/debug/vgaswitcheroo/switch
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
# Init wi-fi
echo 'notsharingmypassword' | sudo -S ifconfig wlan0 up
sudo wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
dhcpcd wlan0
Last edited by KoutaOyamada (2011-05-04 15:31:39)bump (I'm starting to think this VGA card just doesn't work with the driver )
-
[SOLVED] Compiz, ATI 4850, open source driver: fail?
Hi!
I'm trying to use compiz with my ATI 4850 and open source driver, but it doesn't work.
Actually I'm under GNOME.
I used KDE and Kwin compositing using OpenGL works flawlessy. Where is the problem?
When I launch compiz I get:
IRQ's not enabled, falling back to busy waits: 2 0
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
but...
$ glxinfo | grep GLX_EXT_texture_from_pixmap
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
Here's the complete glxinfo output:
$ glxinfo
name of display: :0.0
IRQ's not enabled, falling back to busy waits: 2 0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: Mesa DRI R600 (RV770 9442) 20090101 TCL
OpenGL version string: 1.5 Mesa 7.7
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_depth_clamp, GL_ARB_draw_buffers,
GL_ARB_fragment_program, GL_ARB_imaging, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_point_parameters,
GL_ARB_provoking_vertex, GL_ARB_shadow, GL_ARB_shadow_ambient,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_MESAX_texture_float,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_bgra,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_provoking_vertex,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, GL_APPLE_packed_pixels,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATI_separate_stencil,
GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos,
GL_NV_blend_square, GL_NV_depth_clamp, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_NV_vertex_program, GL_OES_read_format,
GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
Packages installed:
ati-dri 7.7-1
xf86-video-ati 6.12.4-3
libgl 7.7-1
mesa 7.7-1
libdrm-git 20091222-1
kernel26 2.6.32.7-1
EDITED:
installing libdrm 2.4.17-3 doesn't changes...
Last edited by ziabice (2010-02-01 20:31:46)how are you launching compiz? try it through fusion-icon, it makes it much more easier. Try it under xfce/openbox whatever else you have, a month ago I couldn't start fusion under gnome, but with another card.
I suppose you aren't using kms.
I have those packages, and compiz is running fine with my hd 4850, but I'm using it as a standalone window manager. I tried it with xfce too, and it was fine. -
I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?
Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page. -
How to install drivers for ati radeon 3200?and how to config xorg.co ?
how to install drivers for ati radeon 3200?and how to config xorg.conf?
mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier -
MDD upgrade conflict with ATI Radeon 9800
does anyone out there have my specs; Sonnettech MDX Dual 1.6gh processor with ATI Radeon 9800 Pro VGA card? After installing the processor, i now get weird lines all over the screen at bootup and then i get a bunch of green speckles all over my desktop after the computer boots. i can work on my computer, but the screen images, speckles and other artifacts are annoying. i have dropped the hz to 66 and the screen resolution to 800x600 because higher resolutions would cause the computer to freeze. does anyone have any catalyst settings or ATI display panel suggestions ? i wish i could attach the pictures i took of the display.
Dual Power Mac G4 867 & Macbook Pro 2gig Mac OS X (10.4.9) FCP Studio 5.1.2Well, i tried your idea, bought the iceberq5, installed it with ease and things just got worse. 1st, my MDD Dual 867 mac's AGP slot is right next to my fourth RAM slot. So with the Iceberq5 installed, i had to lose 512mb of RAM. it just wont fit. the new cooler cover the RAM slot. so instead of 2gigs of RAM, i'm down to 1.5. 2nd, with the icebeq5 on the ATI card, the door will not close. the iceberq runs into the case holding my DVD drives. After booting the computer up with the case open, the screen still loaded with the screen defects. I'm thinking I have a bad card, yet it worked when the Sonnettech dual processor upgrade was not installed. these weird color lines only occur with the sonnettech md/1.6 dual upgrade and the ATI 9800 Pro installed. I then used TechTool pro to scan and check my AGP card VRAM and it gave me an error. So here is my question, is there another powerful AGP card out there for my mac dual 867 that has a powerful fan on it that is also small enough to allow my case to close and for me to have all my RAM installed ? Thanks
-
K7D Master-L with ATI Radeon 7000
Is anyone using K7D Master-L with ATI Radeon 7000? I am not able to use this
combination. When I switch on the power, the screen doesn't show antying. It is just
blank. Even though the monitor doesn't show up, if I don't press any key then the
system goes further till I see all the 4 leds as green and it tries to read from the
floppy drive. However, if I press a key after the keyboard is initialized, then the
d-bracket stops at Testing VGA BIOS. I haven't installed my hard drive at this stage.
MSI support asked me to try with another graphics card. They also suggested clearing
CMOS. I cleared the CMOS and the problem still exists. In addition, now the d-bracket
stops at "Initializing hard drive controller" though I didn't install hard drive. So, I went
ahead and installed my 200GB hard drive and no change. I think, to fix this issue, I
should first be able to fix my VGA issue. Also note that as I can't see the monitor from
the beginning, I don't know what my BIOS version is and if I can flash it with the latest
version.I just tried with Creative Lab's "3D Blaster Savage4 32MB AGP (32MB SDRAM) " CT6900 which I borrowed from a friend. It didn't work either though this card is supposed to support AGP 2x/4x. I need to see what other cards I can get hold of
and try.
However, as I mentioned, initially the sequence was complete and I could see the 4 leds showing green. But after the advice from MSI tech support to try clearing CMOS for this problem, now the sequence stops at "Initiating Hard Drive Controller" (red red green green). Could this be because the BIOS doesn't know the HDD details after resetting CMOS? If so, once I get my VGA problem resolved will I be able to solve this problem
by entering into BIOS setup? At what stage does the BIOS setup screen show up when I press 'Del' key? If it is after the entire POST sequence then I will be stuck at the hard drive initialization. Also, I read that AMI BIOS supports Ins key which will bypass CMOS setup in the case. Does AWARD BIOS has any such functionality? -
Problems with ATI Radeon HD 2600, electrical interference or flickering pix
Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
Monitor works fine on two other computers, driver is up to date.
Would like to upgrade at some point just disappointed that I’m already having problems.
Any suggestions would be very helpful, in the mean time I’ll searching the forums.
Thanks,When you called Applecare or went to a Genius bar were they of no help?
-
I have a Mac Pro with Ati radeon hd 5870 1024 MB, after the first reboot in the installation of Maverick, the screen does strange things as if the driver does not support.
Hello pitin,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
You can reset the Mac's parameter RAM and SMC.
Best of luck,
Mario -
[Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option. Any recommendations?
Any info is greatly appreciated.Quote from: dannol48 on 23-June-05, 02:25:47
The RS480M2-IL haa a CnQ option in Bios.
Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
Danno
Hello Danno ^^¿''
Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed) with the 3DMARK 2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
thanks and enjoy the time
PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya.. -
After Effects 7 with ATI Radeon X1900 XT
Hi everyone,
I use Adobe After Effects 7 a lot and I'm not happy with my current machine (PowerPC G5 2x1.8GHZ, 2GB DDR SDRAM, ATI Radeon X800 XT), it is too slow to work smoothly when I have several layers and effects going on. Previewing the work on the timeline (OpenGL or Adaptative resolution) is painfully slow and takes on my nerves. I believe this is mainly due to my graphics card, and the fact is not 100% compatible with OpenGL on After effects.
I'm ready to upgrade with a Mac Pro 2.66 GHz Quad Xeon with ATI Radeon X1900 XT, but only if I'm going to enjoy a real improve with After Effects 7, as this is my main editing application right now.
Does anybody have experience with this configuration?
Thanks in advance for reading and replies!
PowerPC G5 2x1.8GHZ Mac OS X (10.4.7) 2GB DDR SDRAM, ATI Radeon X800 XTI have this configuration, but sadly have had no time to play around with After Effects. AE's realtime playback capabilities are limited (especially when compared with something like Motion), so you're probably still going to be rendering to RAM a lot. I believe the OpenGL support is for things like anti-aliasing, blur, and blending modes -- so a faster video card may not automatically equal huge performance boost across the board. Four Xeon cores and a lot of RAM will help it a lot more (see exception below).
Also, AE 7 still has to run under Rosetta which results in a slower performance than if it was native. Also, be aware that there is a limit placed on all Rosetta processes that do not allow them to address more than 1.5GB of RAM combined. This will most likely limit your render speed and preview lengths. See this thread on Adobe's forums for more info:
http://www.creativecow.net/articles/jonesgraham/AE7_on_IntelMacPro/index.html
EDIT: The above link was to the performance comparisons, but not the original Adobe forum thread. Here it is:
http://www.adobeforums.com/cgi-bin/webx/.3bc2401b
However, if you read the thread, and follow the link in it, the author is seeing huge performance gains with AE7 on his MacPro 3GBs over his old dual G5 4.5GBs.
So most likely, you'll see a performance benefit from upgrading. And when an Intel native version of AE ships, things will really fly. -
Display corruption with ATI Radeon X800 XT
I installed an ATI Radeon X800XT card and my 23" Apple display got so corrupted I had to remove the card and get back to my old tested ATI Radeon 9650. The symptoms were as follows: soon after startup, a few white pixels appeared near the center of the display. In a matter of minutes, the amount of white pixels grew up exponentially until they grouped in eight vertical bands, thicker at the bottom of the display. If I dragged an application window across the screen, the window "snowed over" with pixel noise and became unusable. In Safe Mode, the card works well. Of course, in this mode I cannot test it with most graphics applications and Final Cut also does not work.
I have downloaded and installed all the latest (well, 2005) drivers from the ATI support website, posted a support ticket with the manufacturer and am now waiting for its response with abaited breath. Meanwhile, does someone on this forum know how I can make the new card work properly? Thank you for your help.
George
PowerMac G5 DP Mac OS X (10.4.8) 3.5 Gb RAMI will check the fan later in the day and report back. Is it possible that in Safe Mode the fan spins and if I startup the usual way (unsafe mode?) it does not?
PowerMac G5 DP Mac OS X (10.4.8) 3.5 Gb RAM
Maybe you are looking for
-
Why magic jack apps is not working on my iphone 5?
why magic jack apps is not working on my iphone 5?
-
Item creation error...workinfg fine in jDeveloper.
Hello All, I have the file available in CDB at: http://host:port/content/dav/appsassociates/TestContainer/W1/test123.txt I am running the simple download file program which has the following statements: Item sandbox = fileM.resolvePath("/appsassociat
-
Can TCP/IP communication be used for 2 Labview processes on the same target?
I am a newbie to all this LV stuff so bear with me. We are trying to create a simulation tool that will run on the same machine as the client GUI [also LV]. Can we use TCP/IP to communicate between these 2 LV processes on the same machine? If so,
-
How can i find driver for hp gm320aa skype handset...
there is no driver in hp website!
-
I recently upgraded from PSE8 to PSE 12. I have just bought a new camera - Canon 7D MkII - and the PSE12 editor is unable to open the .cr2 images which it generates. I have not found an update for the camera raw plugin which will provide support fo