[SOLVED]as you can install a printer that is on my LAN on my archlinux
hi
I have the following problem I have a print server with multiple printers connected to it, it packs installed on my archlinux need to use those printers?
thanks
Last edited by jccl1706 (2010-03-15 23:42:49)
First you need to know the IP address of that printer server and the port numbers of the different printers. Then you just go into CUPS (http://localhost:631), choose Add Printer, and go through the choosing printer options, when you get to Connection you use: "socket://192.168.0.104:9100" where the IP address and port number (ie 9100) are appropriate to each printer. For more information read the Online Documentation at that CUPS page.
Similar Messages
-
How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials -
Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
SureshHi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh -
HT201413 why is version 4.2.1 the latest you can install on a generation 2 ipod touch
why is version 4.2.1 the latest you can install on a generation 2 ipod touch
Because it will not support newer versions which it cannot run.
In the same way that computers running XP cannot upgrade to Vista or Windows 7 because they are not a high enough spec -
I know you can install CC on two computers...
I know you can install CC on two computers but one of them died and I want to install CC on the new computer. I've read that this works but for me it hasn't – all the apps have "try" next to them instead of "install". Help!
Contact support to reset your activations.
Mylenium -
what the largest size hard drive you can install in your MacBook 2010 and does it matter of its a Mac hard drive are not
You could theoretically upgrade to a 1TB HDD and brand really doesn't matter as long as it's a 2.5" SATA HDD. However I would probably shoot for a 500GB or 750GB. If you want some performance increase as well go for a 7200RPM drive, but just know that you will lose some of your battery life as well. If that's a trade-off you don't really care about then go for the 7200RPM drive.
-
I m wondering if you can delete the apps that show up that you have looked at or have purchased ? I have some that I'm trying to delete but don't know how to do it ...please help or let me know if it can be done ... Thanks
To delete any apps but the ones that are hard wired into your ipad, hold your finger down on the app icons until they start to wiggle. When they do, you'll see red circles with white X's in them. Tap on that and follow the prompt to delete the app.
If you can't delete apps, look in settings, general, restrictions and make sure that deleting apps hasn't been locked out. -
How i can install the products that i have in my contract on my laptop?
how i can install the products that i have in my contract on my laptop?
Make sure your laptop meets the system specifications for the software. Then download and install the CC manager program, sign in using your authorization code, and install the programs that your contract supports.
-
PS or LR ACR 7.3 does not support the D800 raw files, how do you remove ACR 7.3 so you can install ACR 7.1 ?
Mylenium wrote:
Uninstall PS/ LR completely and reinstall from the original media/ download. Run the Creative Suite Cleaner Tool if necessary.
Mylenium
Not so, Mylenium. It's relatively quick to downgrade Camera Raw with a download and a bit of fiddling. See http://forums.adobe.com/thread/1143545 -
Using Configurator, you can install paid apps to a set of iPads. How do you recover the app license if one of the iPad "dies" and needs to be replaced?
Used iMac iLife issues: Apple Support Communities
-
I just received a gift card from someone during these holidays, each time am trying ot redeem the code, I always found a message let me know that this card was not properly activated. How please you can help me about that ?
You don't go to the drop down "Actions" menu to reply to a post. You find the post to which you would like to reply and you hit the "Reply" button. You then type your message and then hit the "Add Reply" button to post your reply.
-
I go to print and get a You must install a printer message first. Where do I do that?
I go to print a picture on my Editor Screen, by clicking on File > Print, and I get a message that "Your have to install a printer first." Where do I do that. My printer is a wireless on my LAN. Don22303
Jeff, Yes, from Elements Editor Full. This is from Elements 10, and I rarely print from Elements so it turns out I was surprised to find the same problem happens with my Elements 8 version, which I still have up. The version is Windows 7. I can print fine from all other applications, e.g. Word. Also print my email, but I had to go back to Internet Explorer 8 from Explorer 9 version because I was getting script errors, but using 8 has been fine for a good while now. Any advice would be appreciated. Don
-
I have managed to create a dictionary which contains a list of common chemical names and terms. But to use it you have to select the dictionary as a replacement for your normal language. As the chemical names are used in sentances constructed in a users normal language this is not ideal. Is there a way to install the new dictionary to work in an additive way to your existing dictionary?
> Message to your friend: I though you would find this
interesting.. blah
> blah.... www.linktomysite.com
What you are looking for is a "send a friend a link" script.
http://www.hotscripts.com/PHP/Scripts_and_Programs/Site_Recommendation/index
.html
use the menu to find the flavor of scripting you can use.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
I want to uninstall the c4580 completely so as I can install another printer. it won't go
I've tried everything to uninstall the c4580 all in one printer and software. Control Panel won't do it, Uninstall on installation disc won't do it. Deleting folders on the laptop for HP won't do it. Have Vista home Basic. Want to install a new wireless all-in-one B110 series. If I install new printer will the other go. Please help. Have managed to remove the c4580 from Xp and 7 laptops and from a Vista Home Premium computer, but it will not budge from this laptop.
Put the installation CD in the drive and navigate to the util/CCC directory. Look for files uninstall_L1.bat through uninstall_L4.bat.
Run uninstall_L1.bat, then uninstall_L2.bat and uninstall_L3.bat. You may need to reboot your computer, follow the instructions provided as the uninstall runs. It is not recommended to run uninstall_L4.bat as it may remove items your computer needs, especially if you have an HP computer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Highest OS YOu CAn Install.
I have Powerbook Titanium G4 800Mhz currently running MAc OS X 10.3.9, and was wanting to know what is the highest OS that i can install onto it.
CheersIt is worth mentioning for those who are adventurous, there is a program called Leopard Assist:
http://mac.profusehost.net/leopardassist/
Mind you, it may fail on future updates simply because the hardware is not there, even if it works in the first go ahead. So be prepared!
Maybe you are looking for
-
Hi All, Could any one please clarify 1.The differnces between AS2 & OFTPS adapters and in which scenarios we prefer OFTPS compared to AS2 2.If we are using AS2 sender adapter to pick data two different mail boxes on different servers, Is there a poss
-
[Unsolved, closed] Grub not showing other kernel (linux-lts)
Hi, Stuck with Grub not showing other kernel, started with willing to keep two kernels. grub config file shows both kernels correctly but still not appearing at boot (it's like pale black/blue, seems I am stuck with grub legacy? tried reinstallation
-
I have a trigger on a table which fires after an update on a specific field. I need to get the osuser (NOT the user) who ran the update . Is that possible ?
-
on my iphone 4 the songs skip in the middle and also stop playing mid song and restart from the beginning and it happens over and over and the song never completely finishes. I dont know what to do
-
ITunes crashes at start up / as of latest update
My iTunes will no longer start Below is the report > Process: iTunes [63000] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTunes Version: ??? (???) Build Info: iTunes-10110401~6 Code Type: X86 (Native) Parent Process: la