[SOLVED] ASCII desktop list
Hello. Is there any program/script that will let me pick from list which desktop environment/window manager I will start without need to edit ~/.xinitrc or installing graphical login manager. Thx.
Last edited by verb0ss (2012-06-09 22:26:24)
Although it was a mission as CDM is only available in Arch User Repository it is exactly what i was looking for. Also it teached me how to makepkg. Not bad for 1st day.
Similar Messages
-
CC desktop lists applications as "Up to Date" when not installed
Operating Windows 7, 64 bit. I found the recommended fixes at: CC desktop lists applications as "Up to Date" when not installed.
They were close. I found that steps 1-3 did not work initially. But before running the cleaner;
1. I uninstalled CC desktop.
2. I did a registry clean with CCleaner
3. then ran the CC desktop cleaner
4. then went back in to the Windows control panel to remove installed programs where I found an icon for Acrobat XI that was the uninstalled program and uninstalled that. Although the
icon was not the standard icon but a generic one, I still needed to remove it.
5. Installed the CC desktop.
That worked.
Good luck!This doesn't work in my case with Windows 8.1
-
SOLVED: BlackBerry Desktop Manager Has Stopped Working
Good morning.
Let me start off by saying I have a Dell laptop runing Vista 64 bit with 4 gig ram. I have Desktop Manager v 4.7 installed and has been working great synching my Outlook calender and my Blackberry.
Starting about a week ago, the synch process gets all the way to the end and I get a message saying:
"BlackBerry Desktop Manager Has Stopped Working" and I have the choice to "check online for a solution and close the program" or "close the program". When I click on "view problem details I get this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: DesktopMgr.exe
Application Version: 4.7.0.37
Application Timestamp: 49c1b7ab
Fault Module Name: StackHash_6d57
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a783
Exception Code: c0000374
Exception Offset: 000aada3
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 6d57
Additional Information 2: a8064b034a1a2f2f618d075073f8fe42
Additional Information 3: 2dc5
Additional Information 4: dbcf31406c7084dbad1f33e2de526f4e
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Any ideas?
Message Edited by The_Geek on 09-29-2009 06:51 AM
Message Edited by The_Geek on 09-29-2009 07:38 AM
Solved!
Go to Solution.I found this on another site:
1.) Start the Desktop Manager software
2.) Connect the blackberry using USB Connector
3.) Select "back-up and restore"
4.) Select "advanced"
5.) Look at the list of information showing in the "device memory" window on your computer
6.) Select "calender all" and DELETE it
7.) Go back to the main screen and syncronize.
8.) Everything should work fine!
In essence it was a corrupt calendar data file on the Blackberry device, apparently. -
[SOLVED] Plasma Desktop segfaults after recent KDE update to ver. 4.6
Today after upgrading some amount of packages, including the new KDE 4.6, my Plasma Desktop "segfaults" every single time I login into my account. I tried to send some information regarding this issue using KDE's internal reporting system, but unfortunately it tells me, that those information are irrelevant. Does anyone experience "segfaulting" of the Plasma Desktop after recent KDE upgrade? I'm looking for some help on how to solve this issue, as for the moment my Arch is dead...
Last edited by Zibi1981 (2011-01-28 18:47:24)panosk wrote:
Actually, it is KDE that is giving you trouble, not the OS . When you reach the kdm login screen, don't login. Instead, switch to a tty (Ctrl+Alt+F1, for example) and login from there. Then, you can see a list with all your plasmoids with
plasmapkg -l
If you find the culprit plasmoid, and it is a plasmoid downloaded outside Arch's repos (from kde-look.org, for example), remove it with
plasmapkg -r plasmoid_name
If the plasmoid is installed as a package, it is probably better to uninstall/upgrade it using pacman.
panosk wrote:do you use some extra plasmoid? if so, you need to rebuild them.
Hi all,
I have the same problem. I tried using tty, but I got "cannot access to X server". Than I tried
Alt+F2 to run Terminal, I used
plasmapkg -l
in order to see the list of all the plasmoids, but I couldn't find the "culprit" plasmoid. I don't know if I am doing it right. Here the list of my plasmapkg:
[encho@x~]$ plasmapkg -l
plasmapkg(1986)/libplasma Plasma::PackageStructurePrivate::createPackageMetadata: No metadata file in the package, expected it at: "/home/encho//metadata.desktop"
BbalL
KMLDonkey
MolmassCalculator
activitybar
akonotes_list
akonotes_note
albums
amarok_containment_vertical
barapplet
battery
binaryclock
blackboard
bookmarks
bubblemon
calculator
calendar
charselect
clock
comic
concentrationCalculator
currentappcontrol
currenttrack
desktop
desktop
desktopDashboard
desktopDashboard
dict
digital-clock
eyes
fifteenPuzzle
fileWatcher
folderview
folderview
frame
fuzzy-clock
gasCalculator
icon
incomingmsg
info
internal:extender
kalgebraplasmoid
katesession
kdeobservatory
keyboard_applet
kgetpiechart
kimpanel
knowledgebase
kolourpicker
konqprofiles
konsoleprofiles
ktorrent
labels
lancelot_launcher
lancelot_part
launcher
leavenote
life
lockout
luna
lyrics
magnifique
mediaplayer
netpanel
netpanel
news
newspaper
newspaper
notifications
notifier
nowplaying
nuclearCalculator
opendesktop
opendesktop_activities
org.kde.griddesktop
org.kde.groupingdesktop
org.kde.groupingpanel
org.kde.showActivityManager
pager
panel
panel
panelspacer_internal
paste
pastebin
photos
plasma_applet_didyouknow_kalzium
plasma_applet_notes
plasma_applet_parley
plasma_applet_rtm
plasmaboard
previewer
qalculate
quicklaunch
rssnow
sal
sal
saverdesktop
saverdesktop
searchbox
showdashboard
showdesktop
similarArtists
simplelauncher
sm_cpu
sm_hdd
sm_hwinfo
sm_net
sm_ram
sm_temperature
spellcheck
system-monitor_applet
systemloadviewer
systemtray
tabs
tasks
timer
trash
twitter
unitconverter
upcomingEvents
videoclip
weather
weatherstation
webbrowser
webslice
wikipedia
windowlist
worldclock -
[Solved]update-desktop-database doesn't work
The output is:
Warning in file "/usr/share/applications/epiphany.desktop": usage of MIME type "multipart/related" is discouraged ("multipart" is a media type that probably does not make sense in this context)
The databases in [/usr/local/share/applications, /usr/share/applications] could not be updated.
Can anyone help?
Last edited by qq1693129601 (2015-01-14 04:37:39)toz wrote:You need the proper rights to modify the files in /usr/share/applications.
Thank you, solved. -
[Solved] KDE Desktop Effects no longer working
Hello,
I just did an update, (I didn't think it was a major one, I don't recall seeing graphics update, though I'm not sure how to confirm - is there a way to see recently updated packages in yaourt?) and after a brief issue with powertop that was solved by a restart (https://bbs.archlinux.org/viewtopic.php?id=179789 - it may be unrelated though) I found that when I restarted, KWin Crashed, and since then, my desktop effects are not working.
I have gone to the KDE Desktop Effects Settings Menu, and under the advanced menu, set the compositing type back to OpenGL 3.1, clicked apply, and confirmed that I wanted to try it even though it had evidently crashed Kwin. I then received a message stating "21 desktop effects could not be loaded". When I clicked details, a popup window said:
"For technical reasons it is not possible to determine all possible error causes.
Desktop effect system is not running."
For the record, I am on a Thinkpad X201 with intel graphics.
Any ideas?
Last edited by TheGuyWithTheFace (2014-04-19 07:35:43)Some Extra information:
I just tried a restart, that didn't work.
I then went back into effect settings, and saw that "enable effects at startup" was not checked. I also saw that under the advanced settings, Qt Graphics system was set to raster. Since I'm not sure which it was supposed to be on originally, but the current configuration wasn't working, I also set that to Native, and then clicked apply. KWin then crashed, here is the output:
Application: KWin (kwin), signal: Aborted
Using host libthread_db library "/usr/lib/libthread_db.so.1".
To enable execution of this file add
add-auto-load-safe-path /usr/lib/libstdc++.so.6.0.19-gdb.py
line to your configuration file "/home/perry/.gdbinit".
To completely disable this security protection add
set auto-load safe-path /
line to your configuration file "/home/perry/.gdbinit".
For more information about this security protection see the
"Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
info "(gdb)Auto-loading safe path"
[Current thread is 1 (Thread 0x7fafaa788800 (LWP 796))]
Thread 4 (Thread 0x7faf8beb3700 (LWP 797)):
#0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
#1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
#2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 3 (Thread 0x7faf8b27a700 (LWP 798)):
#0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
#1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
#2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 2 (Thread 0x7faf8a878700 (LWP 799)):
#0 0x00007fafa9fa2fd3 in select () from /usr/lib/libc.so.6
#1 0x00007fafa42e6c13 in ?? () from /usr/lib/libQtCore.so.4
#2 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
#3 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
#4 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
Thread 1 (Thread 0x7fafaa788800 (LWP 796)):
[KCrash Handler]
#5 0x00007fafa9ef9389 in raise () from /usr/lib/libc.so.6
#6 0x00007fafa9efa788 in abort () from /usr/lib/libc.so.6
#7 0x00007fafa9ef24a6 in __assert_fail_base () from /usr/lib/libc.so.6
#8 0x00007fafa9ef2552 in __assert_fail () from /usr/lib/libc.so.6
#9 0x00007fafa7d6f8d9 in ?? () from /usr/lib/libX11.so.6
#10 0x00007fafa7d6f96e in ?? () from /usr/lib/libX11.so.6
#11 0x00007fafa7d6fc4d in _XEventsQueued () from /usr/lib/libX11.so.6
#12 0x00007fafa7d72905 in _XGetRequest () from /usr/lib/libX11.so.6
#13 0x00007fafa4dfe587 in ?? () from /usr/lib/libGL.so.1
#14 0x00007fafa4dfbf6b in ?? () from /usr/lib/libGL.so.1
#15 0x00007faf89bef6db in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#16 0x00007faf89befa33 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#17 0x00007faf89befb8b in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#18 0x00007faf89b89ef6 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
#19 0x00007fafa4dfd898 in ?? () from /usr/lib/libGL.so.1
#20 0x00007fafa4dd804c in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1
#21 0x00007fafaa34e479 in ?? () from /usr/lib/libkdeinit4_kwin.so
#22 0x00007fafaa350029 in ?? () from /usr/lib/libkdeinit4_kwin.so
#23 0x00007fafaa34aefc in ?? () from /usr/lib/libkdeinit4_kwin.so
#24 0x00007fafaa32f4b5 in ?? () from /usr/lib/libkdeinit4_kwin.so
#25 0x00007fafaa2b6c75 in ?? () from /usr/lib/libkdeinit4_kwin.so
#26 0x00007fafa431d6ea in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
#27 0x00007fafa41fa958 in QFutureWatcherBase::event(QEvent*) () from /usr/lib/libQtCore.so.4
#28 0x00007fafa3491f0c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
#29 0x00007fafa34984d0 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
#30 0x00007fafa8bfa88a in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
#31 0x00007fafa4309a6d in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4
#32 0x00007fafa430caad in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4
#33 0x00007fafa352f71c in ?? () from /usr/lib/libQtGui.so.4
#34 0x00007fafa43086cf in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#35 0x00007fafa43089c5 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#36 0x00007fafa430dae9 in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4
#37 0x00007fafaa2e7896 in kdemain () from /usr/lib/libkdeinit4_kwin.so
#38 0x00007fafa9ee5b05 in __libc_start_main () from /usr/lib/libc.so.6
#39 0x00000000004006fe in _start () -
[SOLVED] Watermark Desktop
Hello,
Is there a package which watermarks the desktop with useful information such as your username/IP etc? I believe "WaterMark" does this but I can't get it to work.
Thanks.
Last edited by RAH (2008-07-13 22:55:50)RAH wrote:The touch command doesn't appear to do anything and /usr/share/conky doesn't exist.
touch creates a file if it doesn't exist. Anyway, I don't believe Conky comes with a default config. Its man page describes everything it does though; just read down the list and add the things you want to see. -
Did apple solve the distribution list issue on lion
In Snow-Leo there was a very annoying problem on mail distribution-lists, if the people on the list had multiple email adresses.
More information here:
https://discussions.apple.com/thread/2398363?start=0&tstart=0
Does anybody know, whether this is solved with lion?
Regards
RobertOpen universal access in system preferences
click seeing
leave zoom off, but click options -
[Solved] How to list which DNS I am using?
Edit, solution to find which DNS you are using. Install:
sudo pacman -S dnsutils
To get the "dig" command. Then use it:
dig http://www.google.ca
And at the bottom of the output you will see
SERVER:
Which is immediately followed by the DNS you are using.
Thank you x33a.
Original post:
I'm trying to use Google DNS which are 8.8.8.8, and 8.8.4.4. I have a pure systemd installation and have the dhcpcd service unit active:
[email protected] loaded active running dhcpcd on eth0
In my /etc/dhcpcd.conf file I have the following:
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# To share the DHCP lease across OSX and Windows a ClientID is needed.
# Enabling this may get a different lease than the kernel DHCP client.
# Some upstream DHCP servers may also require a ClientID, such as FRITZ!Box.
#clientid
# A list of options to request from the DHCP server.
#option domain_name_servers, domain_name, domain_search, host_name
option domain_name, domain_search, host_name
option classless_static_routes
nooption domain_name_servers
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
nohook resolv.conf
nohook lookup-hostname
noipv4ll
With the only changes being "nooption domain_name_servers" and "nohook resolv.conf".
Then in my /etc/resolv.conf I have the nameservers:
# Generated by dhcpcd from eth0
# /etc/resolv.conf.head can replace this line
nameserver 8.8.8.8
nameserver 8.8.4.4
#nameserver 192.168.0.1
# /etc/resolv.conf.tail can replace this line
/etc/resolv.conf has had "chattr +i" done to it to make it immutable from changes.
I think I have it all set-up correctly, as in it all works, but I do not know of an explicit command to tell me exactly which DNS I am using.
Last edited by headkase (2012-10-13 14:53:54)I switched my nameservers over to OpenDNS: http://www.opendns.com/
Because they have a test page: http://www.opendns.com/welcome/
And I got a successful result. So, to change that all I modified were the nameserver numbers in "/etc/resolv.conf". So, I assume that I configured "/etc/dhcpcd.conf" correctly. With the OpenDNS nameservers those now come up as prepopulated in namebench too. Thanks again, solved. -
CS6 desktop lists app as "Up to Date" when deleted
Hi there.
After installing Illustrator CSS I accidentaly deleted from my MAC the old Illustrator CS6, but when I need to copy and paste vectors into Flash CS6 I get an version error. I need to reinstall Illustrator CS6 now but it appears as “up to date” in my Cloud desktop..
I did my homework and tried to find a solution before asking:
I’ve found this link: http://forums.adobe.com/thread/1222611
This link http://forums.adobe.com/thread/1222590
This link http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
This link http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
None of them worked for me as I followed the instructions: Removed the OPM.db file and relogin into the Creative Cloud desktop application. Reinstall the Creative Cloud desktop application.
Run the uninstaller in the Applications/Utilities/Adobe Installers folder to remove the program listed as up-to-date. (Illustrator CS6 doesn't appear in that list.)
I also run the Adobe Creative Cloud Cleaner Tool for Macintosh, but Illustrator CS6 it's not there either.
I just need to RE INSTALL Illustrator CS6 after being deleted from my MAC.
Can someone please give me a solution that is not in any of those links above.
Thanks!!!Carogaspari the information is not being sent to the Creative Cloud desktop application as it would initate the download process.
As an alternative you can download the CS6 software from http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html. When you enter the Adobe ID for your Creative Cloud membership it will apply the licensing from your membership.
I would recommend that you continue to work to resolve the difficulties with your web browsers not being able to send the AAM link information to the Creative Cloud desktop application. You may want to try temporarily disabling your security software to see if you have the same behavior. If you do then I would recommend working directly with our support team. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described. -
[SOLVED] filesystem package: list by label in /etc/crypttab
Reading about Persistent Device Naming, using labels in /etc/fstab rather than UUIDs has some advantages. But /etc/crypttab seems to support only /dev/sdXY and UUID notation. Since flesystem is listed as an Arch Linux package, is there any chance of adding support for naming devices with labels in /etc/crypttab?
Last edited by Konkorde (2014-12-15 01:28:42)falconindy wrote:You cannot identify an encrypted filesystem by LABEL, because the label itself is a property of the unencrypted filesystem. You're asking to solve a chicken/egg problem.
I apologize for misspeaking: I want to identify a partition containing an encrypted filesystem by label in /etc/crypttab. While /dev/disk/sdXY works, /dev/disk/by-label/foo did not work.
falconindy wrote:You can identify an encrypted filesystem by its PARTLABEL (or PARTUUID), assuming you've partitioned your disks with GPT. I added support, implicitly, for this to /etc/crypttab 2 years ago.
Thanks Dave: I am using GPT and although I'm new to PARTLABEL, I'll look into it. Looking at the code you linked, though, I think I probably just want to use the
if (startswith(p, "LABEL="))
branch, rather than
/dev/disk/by-label
Last edited by Konkorde (2014-11-16 16:26:39) -
[solve] change desktop wallpaper!
hello,
im using openbox and i added my .fehbg to my autostart file in the openbox folder. i had the problem, that some other instance is changing the bnackground after the autostart file, so my preferred picture only stayed for 1 second. for now i solved this by adding a sleep function, so that the execution of ~/.fehbg is after the influence of the other instance. but id like to solve this in a wy, that doesnt make my desktop background jump around at the startup!
lizzy
Last edited by caravanlizzy (2014-06-02 20:33:49)my autostarts content is:
#(sleep 3 && /usr/bin/nm-applet --sm-disable) &
tint2 &
volumeicon &
hsetroot -fill /usr/share/wallpapers/nightsky.jpg &
#clipit &
conky &
sleep 2 && sh .fehbg &
# Enable as required
#xbacklight -set 100 &
#/usr/bin/synclient TouchpadOff=1 &
#xxkb &
#spacefm -d &
#setxkbmap gb &
im starting via login-manager.
uname output is:
Linux arch 3.14.4-1-ARCH #1 SMP PREEMPT Tue May 13 16:44:54 CEST 2014 i686 GNU/Linux
and
pacman -Qi openbox
Name : openbox
Version : 3.5.2-6
Beschreibung : Highly configurable and lightweight X11 window manager
Architektur : i686
URL : http://openbox.org
Lizenzen : GPL
Gruppen : lxde
Stellt bereit : Nichts
Hängt ab von : startup-notification libxml2 libxinerama libxrandr
libxcursor pango imlib2 librsvg
Optionale Abhängigkeiten: kdebase-workspace: for the KDE/Openbox xsession
python2-xdg: for the openbox-xdg-autostart
script[Installiert]
Benötigt von : obconf obmenu-generator openbox-themes
Optional für: Nichts
Konflikt mit : Nichts
Ersetzt : Nichts
Installationsgröße: 1184,00 KiB
Packer : Bartłomiej Piotrowski <[email protected]>
Erstellt am : Sa 26 Okt 2013 10:18:36 EDT
Installiert am : Di 20 Mai 2014 04:26:45 EDT
Installationsgrund : Ausdrücklich installiert
Installations-Skript : Nein
Verifiziert durch: Signatur
my system is german, but i guess you still understand the pacman -Qi!
thanks -
Desktops listed as Idle when in use - VMware
I've noticed an issue with a VMware backend where the desktop state is listed as Idle no matter how long the user has been logged in or what the user is actually doing. The power states all are reported correctly. I noticed this with VDI 3.2 and 3.2.1 and with VMware 4.0 and 4.1. This make setting up recycling polices very difficult.
Is this a known issue or is something not configured correctly?There aren't any known issues that I'm aware of.
The first thing to do is to ensure that you have the latest version ( available with your VDI 3.2.1 download ) of the vda tools installed and running on your guests.
If you've got the correct tools installed and running and you're still not seeing the desktop state update correctly, take a look in the Event Viewer on the guest to see if there are any errors relating to the vda tools.
Geoff. -
[Mostly Solved]LXDE - Desktop
How would I be able to re-arrange desktop icons and add options in the menu? Currently, desktop icons all stack starting in the top left and are not moveable. As for the menu, I'm not sure how to edit it. Editing the openbox menu that I have appear on right-click would be an added bonus. Thanks.
Last edited by JerichoKru (2010-02-09 20:49:04)Gusar wrote:
anonymous_user wrote:Do you mean the menu applet in LXPanel? I know it uses the desktop files in /usr/share/applications but I don't know if you can change the categories or sort order.
You can, but it's a bit cumbersome. Copy /etc/xdg/menus/lxde-applications.menu into ~/.config/menus and edit it. Changing sort order is quite simple, here an example of my Multimedia section:
<!-- Multimedia -->
<Menu>
<Name>Multimedia</Name>
<Directory>lxde-audio-video.directory</Directory>
<Include>
<And>
<Category>AudioVideo</Category>
</And>
</Include>
<Layout>
<Merge type="files" />
<Filename>xmms.desktop</Filename>
<Filename>mplayer.desktop</Filename>
<Filename>xine.desktop</Filename>
</Layout>
</Menu> <!-- End Multimedia -->
Note the 'Layout' part. The Multimedia menu will be arranged according to the order in which items are listed here.
It's not possible to freely arrange desktop icons. It will be in the new version of pcmanfm that's currently being developed.
Thanks for th help. Editing the lxde menu doesn't look too much different from the openbox one.
I heard somewhere that pcmanfm2 was stable enough for testing. I'm curious to try it out but I'm not sure which is the most up-to-date, the pcmanfm-svn or the git version?
Last edited by JerichoKru (2010-02-10 16:00:44) -
[Solved] How to list recently used windows?
I like the Unity feature where a key binding either opens or focuses an application window. With KDE I can define a keyboard shortcut which, for example, performs
wmctrl -xa emacs.Emacs || emacs
However, I'd like it to focus on the last focused window, not the first opened window. Is there a command to list all windows in the order they were recently used? (Clearly the Task Switcher gets this information from somewhere.)
Last edited by raul_l (2014-12-16 16:58:24)The command I was looking for is
xprop -root | grep "^_NET_CLIENT_LIST_STACKING"
If anyone is interested, this script
#!/bin/bash
app=$1
workspace=$(wmctrl -d | grep '\*' | cut -d ' ' -f1)
win_list=$(wmctrl -lx | grep $app | grep " $workspace " | awk '{print $1}')
IDs=$(xprop -root|grep "^_NET_CLIENT_LIST_STACKING" | tr "," " ")
IDs=(${IDs##*#})
for (( idx=${#IDs[@]}-1 ; idx>=0 ; idx-- )) ; do
for i in $win_list; do
if [ $((i)) = $((IDs[idx])) ]; then
wmctrl -ia $i
exit 0
fi
done
done
exit 1
in conjunction with the key binding
the_above_script.sh emacs.Emacs || emacs
produces the correct Unity behavior. (How to mark this thread solved?)
EDIT: I modified the script a little bit. It turns out wmctrl and xprop use slightly different formats for displaying hexadecimal numbers.
Last edited by raul_l (2014-12-17 12:08:07)
Maybe you are looking for
-
Questions on Master-Detail HTMLDB HOW-TO
Hi all I have created a 3 page application based on the master detail how-to given at http://www.oracle.com/technology/products/database/htmldb/howtos/index.html Instead of DEPT and EMP tables I have PERSON and PERSON_ADDR tables. The PK of PERSON is
-
CS5 can not output MPE to external DV device
This is quite a surprise for those of us who rely on DV output. Harm Millaard: "An MPE card stops external monitor viewing." "The problem is that CUDA does not currently support output on DV devices, only full screen second displays (DVI, DisplayPor
-
Hi Experts, We are using CRM7.0 with ECC and CRM as backend. When we are trying to create an order, it throws an error log shown below SAPEngine_Application_Thread[impl:3]_28 Error com.sap.isa.isacore.action.order.MaintainBasketSendAction A runtime
-
MDM Adapter dynamic configuration
Hi All, The scenario is, PI picks up a file from ECC using sender File adapter and sends it to different MDM ports using the Receiver MDM adapter. The only difference in the different receiver MDM communication channels sending the data to different
-
Error: The XML parser encountered an error in your deployment descriptor. P
Hi, I am very new to weblogi. I wrote a ejb in eclipse with xDoclet. When I deploy the ejb, Im getting this error: <b>Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 5 Module: SessionLessEjb Error: [EJB:011025]The XML pa