[Solved] Aspire One - Can't get touchpad to work
I'm in the process of installing arch on a hdd One, and i've copied the xorg.conf from the AA1 Arch wiki.
http://wiki.archlinux.org/index.php/Ace … Fxorg.conf
When i test the config, the "X" image displays but i can't move it with the touchpad.
This is my first arch install so i assume there's something i'm looking over. I used the most recent USB img to install, the only thing extra i've installed are the Intel and Synaptic drivers that are in the wiki.
Besides xorg.conf, the only thing i've edited is rc.conf, i just added these modules in the AA1 Arch wiki:
acpi_cpufreq ath5k !memstick pciehp r8169 !snd-pcsp uvcvideo
I tried messing around with the xorg.conf, using stuff i'm finding on the wiki, like following the "My touchpad device isn't located at /dev/input/mouse0" instructions on the Touchpad Synaptics wiki, but nothing changed.
I also added evdev and psmouse to rc.conf as suggested in that wiki, but i got nothing.
I've been getting by with all the documentation available, trying my best to not have to bug you guys, but seems like i'm stuck. If i seem pretty clueless it's because i am, this is kind of learning process for me
I would assume the xorg log would help, but not being able to copy it, and not knowing what parts would be important to type up in this post, i guess i'm kinda shooting in the dark.
Last edited by Apaulo (2009-03-23 04:31:21)
This might sound like a silly question, but...have you tried enabling the touchpad with the Fn+F7 hotkey? I found that mine was disabled by default when I first installed Arch.
Similar Messages
-
My laptop has broken and i have been given a new one by apple - this has changed my serial number so my Adobe Ps,Ai etc are not working and say my licence has expired. How can i get this to work?
uninstall anything adobe 'migrated' to your new mac, clean and then properly install, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
if you need an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html -
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.
Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).
-
I have 2 apple tv's but my playlists only show up on one; can I get them to show up on both? I have home sharing turned on and itunes match.
If you are attempting to share to both at the same time, you can't.
Are you selecting the second AppleTV in home sharing options on the MBP. Are all devices signed in for Home Sharing with the same AppleID?
You will also find some additional things to check here: Troubleshooting Home Sharing -
I downloaded Montain Lion several times. I could not install. It said `could not be verified or corrupted'. How to solve this? Can I get a refund?
On your profile, you say that you are using Mountain Lion. Is that correct? If you are using Mountain Lion, you don't have to download the Mountain Lion installer again.
Also, that error is usually caused by problems with your Internet connection or your hard disk, so first, open Disk Utility, select Macintosh HD in the sidebar and verify the disk. If it's OK, you have problems with your Internet connection, so contact with your ISP -
In one on one I was shown how to do screenshots w/ com 4 can't get it to work now
I was shown in one on one how to do imovie screen shots using com 4. Now I can't get it to work.
What am I doing wrong? ThanksYou can also remap the command to a single key:
System Preferences, Keyboard, Shortcuts, Screenshots, select one of the options (like save picture of selected area), to an unused Fkey (I use F13 on my wired keyboard). 1 key screenshot. -
I have several episodes of a TV show where it says download error, tap to retry and when I do it repeats the error message. Can I get it to work or get reimbursed for the ones I'm missing? I'm using an iPad 1 which has worked fine for all the others.
Hi AlpineJean,
I'm sorry to hear you are having issues downloading some episodes to your iPad.
I would first suggest you sign out of your iTunes account on your iPad, restart the device and sign back in.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
Click on the link below for additional troubleshooting steps with more details and screenshots.
I've quoted some helpful highlights for you:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To view or download previously purchased:
TV Shows on iOS
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID you used for the original purchase.
Tap More from the bottom navigation bar.
Tap TV Shows.
Locate the TV show episode or series you would like to download.
Once you've located the TV shows you are looking for, tap the download button.
The TV show will begin downloading.
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.
If this does not resolve your issue, please follow these instructions for support from the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Have a great day!
- Judy -
My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?
If it's not an Airprint enabled printer, you can not natively through your iPad. BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.
-
I have 3 computers and one has the "clear search history" line greyed out. I can't get this to work.
# Question
I have 3 computers and one has the "clear search history" line greyed out. I can't get this to work.Is Tools > Options > Privacy > History: "Remember search and form history" enabled?
If that is disabled then there is nothing saved and nothing to delete.<br />
You still see suggestions in the drop down list if showing suggestions is enabled.
*http://kb.mozillazine.org/Search_Bar -
I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
I've changed my E.Mail and Apple ID but my account name is still the old one - can'nt get rid of it .
Please advise.Does Apple ID: Changing your Apple ID help?
-
I have 2 ipad minis and I can't get headphones to work on either one.
I have 2 ipad minis and I can't get headphones to work in either one. I have tried to push plug into the jack hard. All the headphones work in my ipod. Music still plays outside the headphones but not inside. Please help, I have 2 frustrated children because they can't use their headphones.
Never mind figured it out. Things are so simple, but yet so hard :)
-
[SOLVED] I can't get virtual hosts working. What's wrong?
What I've decided to do is try to set up each domain name in the user folder to whom it belongs (for example: /home/username/somedomain.com/htdocs). I can't get it to work though. I keep getting an error saying that there's no index file (although there is) or that the location isn't readable (although it is). I'm trying to make it so that if the domain name matches with a virtual host section in httpd-vhosts.conf that a specific DocumentRoot will be loaded for that domain, etc. But, if the domain name points to my server but doesn't match, then I want the default location to work. I can't seem to make this work.
This is my http.conf:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#CUSTOM
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
User http
Group http
</IfModule>
</IfModule>
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
<Directory "/srv/http/default/htdocs">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
<IfModule dir_module>
DirectoryIndex index.php,index.html
</IfModule>
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#Scriptsock /var/run/httpd/cgisock
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
#CUSTOM
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
And here's my httpd-vhosts.conf:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName 45.117.5.40
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
ErrorLog "/srv/http/default/log/error_log"
CustomLog "/srv/http/default/log/access_log" common
</VirtualHost>
<VirtualHost *:80>
ServerName somedomain.com
ServerName www.somedomain.com
ServerAdmin [email protected]
DocumentRoot "/home/normaluser/somedomain.com/htdocs"
ErrorLog "/home/normaluser/somedomain.com/log/error_log"
CustomLog "/home/normaluser/somedomain.com/log/access_log" common
</VirtualHost>
So, for example, I want it to be so that if I visit http://45.117.5.40 that it'll show the stuff ftom /srv/http/default/htdocs but if the domain name matches somedomain.com then I want the server to show the content from /home/normaluser/somedomain.com/htdocs.
What currently happens is that if I visit http://45.117.5.40 or somedomain.com, they both show the same content from /srv/http/default/htdocs.
If I comment out the first VirtualHost section, then everything stops working and I see the default "Access forbidden!" message.
What am I doing wrong?
Last edited by trusktr (2012-04-13 06:15:41)I fixed it. In case any newbs come across this, I had to add a new <Directory> section for the DocumentRoot of the virtual host. Simply adding the VirtualHost entry in the vhosts file isn't enough.
For example, for the "somedomain.com" vhost in the example above to work, I added this to http.conf:
#This must match with the same location as DocumentRoot in httpd-vhost.conf.
<Directory "/home/normaluser/somedomain.com/htdocs">
#Put whatever directives you want in here
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Let me know if you need any clarification.
Last edited by trusktr (2012-04-13 06:16:02) -
[SOLVED] Can't get sound to work.
Hello, I installed archlinux a few days ago, I love it!
But I can't get sound to work.
I followed the alsa archwiki, but I still couldn't get it work.
I'm a real noob.
Someone please help.
Last edited by egb (2011-02-16 22:45:12)JokerBoy wrote:
Inxsible wrote:
Try this: as your user NOT root
alsamixer
why not? i use alsamixer as root to set all "globally". and "alsactl store" after that.
egb - make also sure you added yourself to audio group.
yeah, I did that some time ago
edit: oh and I get this when I do the "alsactl store":
alsactl: save_state:1504: No soundcards found...
Last edited by egb (2011-02-16 10:30:34)
Maybe you are looking for
-
How to get photos off my Windows 7 PC to my iPhone and iPad Mini?
How do I get photos off of my Windows 7 PC to my iPhone 4S and iPad Mini automatically through iCloud?
-
Where Is The Archive (Link) For "The List" (Weekly Suggested Compilations)
Each week (or so), the iTunes Store has a button link to the current song compilations for certain themes. For example, this week, it is 17 college fight songs. A few weeks ago, I wanted to check out the suggested downloads for popular TV commercial
-
Adding MPEG-1 video: iTunes plays it but iPod loses audio
I've read the support article here: http://docs.info.apple.com/article.html?artnum=302588 The background: My camcorder (a JCV Everio) exports video as MPEG-2 (".mod") files. About the only thing that seems able to open these is the editing software t
-
SBO Ent XI 3.1 SP3 repository database access error
Dear Experts, We are installing XI SP3 and using oracle 10g for repository database, we've installed 10.2.0.4 oracle db on windows 2008, tnsping is working, but we are getting following error ; Database access error. Reason Loading shared object fail
-
Names of column appearing in alv output after changing layout in alvgrid?
Hi all I have a requirement where I am displaying 20 fields using alv grid(cl_gui_alv_grid). Now each time when I run I can change layout and can display any number of columns in output using change layout option. My requirement is i need to know the