[SOLVED] Aspire one D250 almost dead after update

Well, today I did a major update (something like 140 mb) and after rebooting, my Aspire One D250 (with kernel26-one from the AUR) loads Gnome, and then it gets stuck.
I've been reading and there seems like a lot of people is having troubles with xorg, touchpads and keyboards.
Seems like my case here: I can't get my touchpad or the keyboard to work, I can't do anything.
Also, the resolution is wrong, and it seems like KMS is not working well, as the boot screen doesn't get the proper resolution neither.
Please tell me if there's anything else I can bring on to help figure out what's wrong.
Thanks in advance!
Last edited by guidito73 (2011-03-20 03:21:30)

From what I've seen, kernel26-one is out of date and was marked as such on the 12th of March.
And if I remember correctly, the kernel26-one is for the A110, and you have the D250. I run kernel-26 just fine on my D255.
Last edited by tntexplosivesltd (2011-03-24 07:00:19)

Similar Messages

[SOLVED] Acer Aspire One D250 LAN not detected.

Hi guys,
Cant seem to find anyone on the net that has the same problem as me, but here it goes.
I have a Acer Aspire One D250, Id really like to run linux on it. There are dozens of posts on the web explaining you need to install the drivers from the Atheros site because the output of lspci is wrong.
Well, the problem that i am having with Arch is that lspci doesnt even show my network card, and as soon as i boot, the light on the physical card turns on, but never goes off (almost like it hangs...)
Ive included the output of Arch's lspci where its not visible, and the output of the ubuntu live netbook remix where it is visible just as the wrong name.
Its almost like arch wants to load the wrong driver and then the card just freezes.... but i dont know, im not a fiull blown linux expert...
Hope someone can help me because its driving me crazy.
This is the output from the arch lspci:
# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
This is the output from the ubuntu netbook remix lspci:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. Device 1062 (rev c0)
Last edited by kirothi (2009-10-09 08:40:23)

Kernel Installed from the testing repo, now im getting the following build errors:
# make install
make -C /lib/modules/2.6.31-ARCH/build SUBDIRS=/root/atheros_ln_driver/src modules
make[1]: Entering directory `/usr/src/linux-2.6.31-ARCH'
CC [M] /root/atheros_ln_driver/src/at_main.o
/root/atheros_ln_driver/src/at_main.c: In function 'at_request_irq':
/root/atheros_ln_driver/src/at_main.c:262: warning: passing argument 2 of 'request_irq' from incompatible pointer type
include/linux/interrupt.h:116: note: expected 'irq_handler_t' but argument is of type 'void (*)(int, void *)'
/root/atheros_ln_driver/src/at_main.c: In function 'at_probe':
/root/atheros_ln_driver/src/at_main.c:343: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:344: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:347: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:348: warning: 'DMA_nnBIT_MASK' is deprecated
/root/atheros_ln_driver/src/at_main.c:392: error: 'struct net_device' has no member named 'open'
/root/atheros_ln_driver/src/at_main.c:393: error: 'struct net_device' has no member named 'stop'
/root/atheros_ln_driver/src/at_main.c:394: error: 'struct net_device' has no member named 'hard_start_xmit'
/root/atheros_ln_driver/src/at_main.c:395: error: 'struct net_device' has no member named 'get_stats'
/root/atheros_ln_driver/src/at_main.c:396: error: 'struct net_device' has no member named 'set_multicast_list'
/root/atheros_ln_driver/src/at_main.c:397: error: 'struct net_device' has no member named 'set_mac_address'
/root/atheros_ln_driver/src/at_main.c:398: error: 'struct net_device' has no member named 'change_mtu'
/root/atheros_ln_driver/src/at_main.c:399: error: 'struct net_device' has no member named 'do_ioctl'
/root/atheros_ln_driver/src/at_main.c:403: error: 'struct net_device' has no member named 'tx_timeout'
/root/atheros_ln_driver/src/at_main.c:411: error: 'struct net_device' has no member named 'vlan_rx_register'
/root/atheros_ln_driver/src/at_main.c:414: error: 'struct net_device' has no member named 'poll_controller'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_error_detected':
/root/atheros_ln_driver/src/at_main.c:834: error: 'struct net_device' has no member named 'priv'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_slot_reset':
/root/atheros_ln_driver/src/at_main.c:857: error: 'struct net_device' has no member named 'priv'
/root/atheros_ln_driver/src/at_main.c: In function 'at_io_resume':
/root/atheros_ln_driver/src/at_main.c:884: error: 'struct net_device' has no member named 'priv'
make[2]: *** [/root/atheros_ln_driver/src/at_main.o] Error 1
make[1]: *** [_module_/root/atheros_ln_driver/src] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.31-ARCH'
make: *** [default] Error 2
again, no internet information available, although someone posted about editing the source file, but getting send and transmit errors once the driver was loaded into the kernel.
thanks for the help.
P.S. compiling this thing under ubuntu was no problem, and it worked instantly.

Dead after update (Nokia X6)

Hello All!
Yesterday, I tried to update my X6 (16 gb) through Nokia Software Updater. I don't know what happened but my set is dead after update. I guess the update process failed somewhere. I do remember getting an error to connect the set again.
I tried to use Green+Red+Camera + Power on method but my set starts to continuouly vibrate while the screen is all blank.
Can someone please help me how to revive it back to life. Thanks,.
Solved!
Go to Solution.

here you go
/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

[SOLVED] impossible to boot (UEFI-grub2) after update

Hi,
problem : after update my computer refuses to boot. It doesn't get to the grub2 (actually 1.99) menu, it just says : no boot device found.
My hardware : Asus M8Z77-V LX motherboard with 1 SSD.
In the bios I disabled the bios legacy option to force it to boot with UEFI.
As I hadn't moved to systemd yet, I waited to update a while(2 months).
Last week I updated several pacakges by hand (kernel, vlc, ...) : All updates that according to me didn't involve with systemd.
Then I rebooted and ... problem.
I have tried a whole weekend to solve it by browsing through the wiki's but to no avail.
I can boot with live-cd and access my SSD. All data is there. I can also chroot and do stuff.
The SSD is partitionned in GPT as follows :
sda1 : 1 gb fat 32
sda2 : 20 gb ext4 root
sda3 : 20 gb ext4 var
sda4 : 79 gb ext4 home
I did not do any update of my bios or changed anything on my hardware.
It seems that my bios does not see my SSD as UEFI-bootable device anymore.
When I installed Arch in June on my brand new computer I made a backup with redobackup (partclone) of a working installation.
As a final ressort I put back the image I created then.
But it doesn't work either!
Then I updated my bios but same problem.
My bios can see the fat 32 partition. I know this because to update the bios it looks for attached fat 32 storage and there is shows the partition .
I there anywone who can point me in a good direction?
Thanks a lot in advance.
Last edited by BelgiumArcher (2013-01-08 16:20:43)

I am sorry if I lost your confidence. I can't find any contradictory info in my post.
The Arch Wiki-Grub 2 says that you need to boot in UEFI before you can (re)install grub2.
As my live-cd won't boot in UEFI mode, the only option is that I make a live-usb stick and see if that one will boot in UEFI.
But in the end it is still strange that a software update breaks my Asus UEFI-boot.
I just found another unlucky guy with a simular problem. I'll try his solution tonight.
http://superuser.com/questions/372962/w … ot-manager
http://superuser.com/questions/376470/h … -grub2-efi
I will try the live-usb method and report on it later.

IPhone 5 dead after updating to iOS 8.0.2

After updating from 7.1.2 to 8.0.2, my iPhone 5 cannot charge and is not recognized by my Mac. All original cables. After 24 hours, the battery is dead, so there is no way to even find a solution by restoring or anything. It is a brick. If I were to replace the battery by myself, I still would not know how to proceed, software-wise, as not able to downgrade back to 7.1.2 (where everything was fine) and not sure of iOS 8.1 fixes any of this.
Any ideas welcome. Been surfing the web for weeks and still no solution found.

Hi! I always reset my network setting after every update of iOS because of the battery drain. I did the same for iOS 8.02, but to no effect. The problems I am experiencing are:
1. battery drain - just around 4hrs of regular use instead of 8hrs
2. the phone lags even when answering calls
3. frequent signal drops and the phone heating up
4. reset by itself yesterday while i was switching between apps
I also updated an iPad mini first gen, but has no problem so far.

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

[SOLVED] Unable to start vmware 9 after update

Hello Folks,
I got one weird issue after update,
I tried to start vmware, failed as nothing happeded, no error message shown.
Do you have any clues ?
┌─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# uname -a
Linux tp 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64 GNU/Linux
┌─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# vmware
┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# vmware-modconfig --console --install-all
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/task.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-CEZuvv/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/modconfig-CEZuvv/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmmon-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmmon-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/driver.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/hub.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/netif.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/userif.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/bridge.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/filter.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/procfs.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/smac.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-CEZuvv/vmnet-only/vnetUserListener.o
LD [M] /tmp/modconfig-CEZuvv/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmnet-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/filesystem.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/file.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/stubs.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/block.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/module.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/control.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/super.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/inode.o
CC [M] /tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.o
/tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: initialization from incompatible pointer type [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/inode.c:49:4: warning: (near initialization for ‘RootInodeOps.lookup’) [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: initialization from incompatible pointer type [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:38:4: warning: (near initialization for ‘LinkDentryOps.d_revalidate’) [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c: In function ‘DentryOpRevalidate’:
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: warning: passing argument 2 of ‘actualDentry->d_op->d_revalidate’ makes integer from pointer without a cast [enabled by default]
/tmp/modconfig-CEZuvv/vmblock-only/linux/dentry.c:104:7: note: expected ‘unsigned int’ but argument is of type ‘struct nameidata *’
LD [M] /tmp/modconfig-CEZuvv/vmblock-only/vmblock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmblock-only/vmblock.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmblock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmblock-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-CEZuvv/vmci-only/driverLog.o
LD [M] /tmp/modconfig-CEZuvv/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-CEZuvv/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
/usr/bin/make -C /lib/modules/3.6.11-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-3.6.11-1-ARCH'
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/af_vsock.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/vsockAddr.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/notifyQState.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/util.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/stats.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/linux/notify.o
CC [M] /tmp/modconfig-CEZuvv/vsock-only/driverLog.o
LD [M] /tmp/modconfig-CEZuvv/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CEZuvv/vsock-only/vsock.mod.o
LD [M] /tmp/modconfig-CEZuvv/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/linux-3.6.11-1-ARCH'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-CEZuvv/vsock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/modconfig-CEZuvv/vsock-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface done
VM communication interface socket family done
Blocking file system done
Virtual ethernet failed
VMware Authentication Daemon done
Unable to start services
┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
└─# vmware
┌─[✗]─[root@tp]─[/tmp]─[0+4]─[99%=]
└─#
Thanks in advance,
Liao
Last edited by liao (2013-01-11 14:10:29)

after check vmware message under /tmp/vmware-$USER/vmware*.log, found one package is missing - libpng12, after installed it, everything looks good again

[Solved] ADF BC - Correlation of Refresh After Update checkbox with Returni

Hello all,
As per JDev (10.1.3.3.0) help system Refresh After Update option is used when there is Before Update trigger on a table.
As far as I know ADF BC framework is using Returing clause of an Update statement to implement Refresh After Update option.
First of all I created the following objects in Oracle DB 10.2.0.3.0:
CREATE TABLE TAB1
     ID          NUMBER          PRIMARY KEY,
     EDITED_AT     DATE,
     VALUE          VARCHAR2(64)
CREATE SEQUENCE S_TAB1
     INCREMENT BY 1
     START WITH 1;
CREATE TRIGGER T_TAB1_BIE
BEFORE INSERT OR UPDATE ON TAB1
FOR EACH ROW
BEGIN
     IF INSERTING THEN
          SELECT S_TAB1.NEXTVAL INTO :NEW.ID FROM DUAL;
     END IF;
     :NEW.EDITED_AT := SYSDATE;
END;
/Taking into consideration aforesaid I tried to do the following in SQL Plus:
SQL> insert into tab1(value) values('ddd');
1 row created.
SQL> commit;
Commit complete.
SQL>
SQL> select * from tab1;
        ID EDITED_AT           VALUE
         1 27.03.2008 17:01:24 ddd
SQL>
SQL> declare dt date; val varchar2(64);
2 begin update tab1 set value = 'ddd' where id = 1 returning edited_at, value into dt, val;
3 dbms_output.put_line('txt = ' || dt || ', ' || val);
4 end;
5 /
txt = 27.03.2008 17:01:24, ddd
PL/SQL procedure successfully completed.
SQL>
SQL> select * from tab1;
        ID EDITED_AT           VALUE
         1 27.03.2008 17:02:12 ddd
SQL>As it can be seen Returning clause of an Update statement does not return a new date, i.e. 27.03.2008 17:02:12, that was updated by the trigger, it returns an old one - 27.03.2008 17:01:24.
Should I change any parameter in Oracle DB or what can I do that ADF BC refreshes values generated by a Before Trigger?

Yerzhant,
Something is certainly not right. I don't have a 10.2.0.3.0 instance handy at the moment, but I tried verbatim your example in 11.1.0.6.0, and it works properly.
I am using this capability all over the place in ADF BC with no problems, database versions from 10gr1 to 11gr1.
Perhaps time to contact support.
John

N73 dead after updating from nokia online firmware...

can anybody help me i have a n73 it belongs to one of my customer he has a software issue.. the phone was freezing.. i tried to update it with the online firmware update from a nokia software.. after updating the phone wont turn on anymore.. can anyone help me about this issue.. thank you..

ok guys, please be advised that upgrading N73 is not something everyone can do! Please view the software upgrade page completely before upgrading your phones. It is all stated there already.
Here is a quote from the page:
Please note that not all N73 models have new software available. Nokia produces many different variants of each product (for different countries and languages) and not all variants have updated software. It is our priority to update all variants as quickly as possible and we apologize for the delay. We will let you know as soon as new variants do become available. (24-Nov-06)
Nokia N93 updates are temporarily unavailable due to maintenance. You can still download and install the Nokia Software Updater application to your computer for use with other compatible Nokia products. (16-Nov-06)
Firmware upgrading is something serious. Please read everything before upgrading it!Message Edited by mmubashar on 14-Jan-2007
12:15 PM
-= If you laugh at someone on their problems, you are laughing at yourself for the same problem you faced once ago =-

Nano dead after update

Just installed i-tunes 7
After updating my nano, it gave an error message and a folder icon. spent the night at the apple support site to fix the problem. End up with dead nano.
Have to sent to apple for repair
Thanks Apple for your new software!!#%#
deem NL

try this ipod trouble shooting
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

[SOLVED] Intel DRI does not work after update

Hi,
after update of kernel from 3.5.6 to 3.6.5 and intel driver and deletion of dri2proto and mesa via pacman -Qdt (there are no more dependencies).. acceleration is no longer working
$ export LIBGL_DEBUG=verbose; glxinfo | grep renderer
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: i965
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: Can't open configuration file /etc/drirc: No such file or directory.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
Configuration:
SandyBridge I5, Intel HD 3000
Can somebody help?
Last edited by microcz (2012-11-07 06:15:23)

OT: A simpler way to check if some packages are installed:
$ pacman -Q intel-dri libgl foobar
intel-dri 9.0-1
libgl 9.0-1
error: package 'foobar' was not found
What's the output of 'groups'? Maybe you need to add yourself to 'video' group?
http://www.linuxquestions.org/questions … nf-794105/
http://www.mail-archive.com/dri-devel@l … 41313.html

One notification on Settings after updating to iOS8?

Hey guys, I'm having a sort of weird issue with iOS8. After updating, my Settings icon had a notification, and I can't figure out what it's for. I've poked around in the settings and can't see anything that would have triggered the notification. I've restarted my phone and it's still there. It's probably some easy solution, but can anyone help me out?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

[SOLVED] Wrong handling with file types after update

Arch can't "remember" which program to use for certain file type
Example:
after update arch try to open everything (mp3, avi, doc, odt, rar.......) with gedit, when I set mplayer for avi, Arch try to open every file with mplayer, I set writer for odt files Arch try to open every file with writer and .....
And another thing, every file have "text file" icon
Last edited by Joxy (2008-06-25 16:50:16)

Take a look here http://bbs.archlinux.org/viewtopic.php?id=50667

[SOLVED] Network Manager systemd unit fails after update

EDIT: Reinstalling libnm-glib resolved this issue
After updating to the latest version of NetworkManager (networkmanager-0.9.8.10-3), the systemd unit fails to start. It works fine after downgrading back to the previous version though (networkmanager-0.9.8.10-1). I'm not sure if this is a bug or an error on my end; since the previous package works I've just dowgraded for the time being. For the update that doesn't work, here is the output of "systemctl status" and the systemd journal:
>>sudo systemctl daemon-reload
>> sudo systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since Wed 2014-06-11 15:28:25 EDT; 10s ago
Process: 24073 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 24073 (code=exited, status=127)
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
>> journalctl -xn
-- Logs begin at Tue 2014-06-10 12:47:19 EDT, end at Wed 2014-06-11 15:28:36 EDT. --
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:25 kyle systemd[1]: Starting Network Manager...
-- Subject: Unit NetworkManager.service has begun with start-up
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has begun starting up.
Jun 11 15:28:25 kyle systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
Jun 11 15:28:25 kyle systemd[1]: Failed to start Network Manager.
-- Subject: Unit NetworkManager.service has failed
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Unit NetworkManager.service has failed.
-- The result is failed.
Jun 11 15:28:25 kyle systemd[1]: Unit NetworkManager.service entered failed state.
Jun 11 15:28:25 kyle sudo[24070]: pam_unix(sudo:session): session closed for user root
Jun 11 15:28:28 kyle dbus[489]: [system] Failed to activate service 'org.freedesktop.nm_dispatcher': timed out
Jun 11 15:28:36 kyle sudo[24075]: kyle : TTY=pts/2 ; PWD=/var/cache/pacman/pkg ; USER=root ; COMMAND=/usr/bin/systemctl status NetworkManager
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session opened for user root by kyle(uid=0)
Jun 11 15:28:36 kyle sudo[24075]: pam_unix(sudo:session): session closed for user root
Last edited by T0k3n (2014-07-03 15:18:01)

Check the changes:
https://projects.archlinux.org/svntogit … e192881dc5
https://projects.archlinux.org/svntogit … ee906b6c44
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.

[SOLVED] Only https sites are opening after update

Today I updated whole system, but after update my browsers (firefox and konqueror) are not able to open http sites. I'm only able to open https sites. Everything was working fine before the update. But I'm able to ping both https and http sites:
PING www.vpnbook.com (195.60.76.198) 56(84) bytes of data.
64 bytes from www.vpnbook.com (195.60.76.198): icmp_seq=1 ttl=44 time=489 ms
64 bytes from www.vpnbook.com (195.60.76.198): icmp_seq=2 ttl=44 time=519 ms
64 bytes from 195.60.76.198: icmp_seq=3 ttl=44 time=499 ms
--- www.vpnbook.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2089ms
rtt min/avg/max/mdev = 489.561/503.014/519.683/12.519 ms
PING www.google.com (74.125.236.113) 56(84) bytes of data.
64 bytes from bom03s01-in-f17.1e100.net (74.125.236.113): icmp_seq=1 ttl=50 time=340 ms
64 bytes from bom03s01-in-f17.1e100.net (74.125.236.113): icmp_seq=2 ttl=50 time=290 ms
64 bytes from bom03s01-in-f17.1e100.net (74.125.236.113): icmp_seq=3 ttl=50 time=280 ms
--- www.google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 280.700/303.871/340.199/26.014 ms
Last edited by ansh_kumar (2014-04-22 02:51:42)

Wait I just installed traceroute from https mirror. Here is the output:
traceroute to 173.194.36.40 (173.194.36.40), 30 hops max, 60 byte packets
1 10.147.204.2 (10.147.204.2) 675.523 ms 675.639 ms 695.598 ms
2 10.147.197.18 (10.147.197.18) 897.484 ms 875.211 ms 897.173 ms
3 10.147.197.61 (10.147.197.61) 936.968 ms 916.711 ms 915.857 ms
4 10.147.197.1 (10.147.197.1) 915.592 ms 936.590 ms 955.462 ms
5 10.147.201.65 (10.147.201.65) 955.237 ms 955.521 ms 977.024 ms
6 10.147.193.53 (10.147.193.53) 977.130 ms 119.199 ms 259.974 ms
7 218.248.82.210 (218.248.82.210) 261.167 ms 218.248.82.206 (218.248.82.206) 261.732 ms 218.248.82.210 (218.248.82.210) 261.279 ms
8 72.14.218.242 (72.14.218.242) 262.141 ms 261.980 ms 262.662 ms
9 66.249.95.106 (66.249.95.106) 262.956 ms 262.671 ms 263.137 ms
10 209.85.252.143 (209.85.252.143) 262.967 ms 263.329 ms 262.675 ms
11 209.85.241.189 (209.85.241.189) 263.122 ms 263.349 ms 263.451 ms
12 bom04s02-in-f8.1e100.net (173.194.36.40) 159.342 ms 159.542 ms 179.665 ms

[SOLVED] Aspire one D250 *almost* dead after update

Similar Messages

Maybe you are looking for

[SOLVED] Aspire one D250 almost dead after update