[SOLVED] Assaultcube low FPS
All other games are running fine on my nVidia GT520 I've bought for very cheap (actually the cheapest card I liked)
Assaultcube runs fine on 1024 * 768, but when I set the resolution to native (1440*900) FPS starts dropping to 19 FPS.... why? If I lower the resolution I get better FPS. I've never had such problems on my Radeon HD 3650 card ...
Last edited by PLANTROON (2013-02-02 19:19:06)
PLANTROON wrote:
All other games are running fine on my nVidia GT520 I've bought for very cheap (actually the cheapest card I liked)
Assaultcube runs fine on 1024 * 768, but when I set the resolution to native (1440*900) FPS starts dropping to 19 FPS.... why? If I lower the resolution I get better FPS. I've never had such problems on my Radeon HD 3650 card ...
Solved by enabling FSAA in nVidia settings. I dont get any tearing and it runs at 30+ FPS so its ok
Similar Messages
-
[SOLVED] Warcraft Low FPS
When I first installed my nvidia card (like 4 months ago) only overclocked by factory but not by me in any settings; I was having great FPS in Warcraft, in dungeons and caves, like 80-100 fps in big cities like Orgrimmar 30-45 .
Suddenly, out of nowhere it just went to half of it, on dungeos I'm having like 30-40 and in big cities 9-20 fps, I cant tell what really changed, I made no changes that I can recall, the only weird fact was I started having some issues with compiz, when I did Alt+Tab the computer freezed and in journalctl I could see some messsage regarding an error with "NVR"
Anyway, I made a whole fresh installation, and it came out with the same results in Warcraft FPS but the problem with compiz was fixed
I tried all the tweaks in Arch Wiki regarding Warcraft and nVidia but still wont solve it, also I noticed Warcraft is only using 45% of graphic card, is there a way to increase it?
Also I tried installing beta drivers, wich are the ones that I used before and it behaves even worst.
Any ideas?
UPDATE (fix)::
Problem was in the new intel_pstate for frequency scaling, it only has powersave and performance governors.
Setting this in the kernel command line disables intel_pstate and goes back to acpi_cpufreq letting decide whether to use ondemand or conservative governors, being possible to increase CPU ratio.
intel_pstate=disable
Still, using acpi_cpufreq with powersave will ahve the same behavior of intel and won't increase CPU clock.
Thank you everyone
Last edited by axelectrik (2014-05-28 04:33:52)THank you al for your suggestions and sorry for this delay!!
I've been trying a lot of stuff, kernel, cleaning PSU, overclocking CPU ... and there is where I found the problem!! Still I need help to solve it
I noticed that temperature on CPU was always below 50° wich is not usual when I play WoW, soo I checked the clock ratio, it was under 1.8GHz! (why would I want an i5 running WoW at that speed)
So I changed the settings on cpupower for performance, by doing these the game fps increased like crazy, just as I typed Enter to the command it went from 30fps to 68fps
The problem appears to be the governor since it is in powersave, but also I don't want to have it in performance, would be a waste to have high frequencies when I'm just browsing web, but these are the only governors available (no ondemand, conservative or userspace)
I've also noticed the same low frequencies when compiling or running any other apps.
Any idea in how to set the frequency "ondemand" or how to get these modules? (the only one that appears is userspace but cannto be applied even if modprobed
Thank again -
[Solved]Low FPS while gaming Steam games on Linux
I have low fps (range between 10-30) while gaming Steam games on Linux in e.g. Dota 2 on ultra low graphics game settings.
System info:
Linux 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64 GNU/Linux
Hardware:
Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz
VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller
NVIDIA Corporation GT 620M
4 GB RAM
I have installed next packages:
extra/mesa 10.4.1-1
extra/mesa-libgl 10.4.1-1
multilib/lib32-mesa 10.4.1-1
multilib/lib32-mesa-libgl 10.4.1-1
extra/xf86-video-intel 2.99.917-1 (xorg-drivers xorg)
extra/libcl 1.1-4
extra/nvidia 343.36-2
extra/nvidia-utils 343.36-1
extra/opencl-nvidia 343.36-1
multilib/lib32-libcl 1.1-1
multilib/lib32-nvidia-utils 343.36-1
multilib/lib32-opencl-nvidia 343.36-1
community/bbswitch 0.8-20
community/bumblebee 3.2.1-8
community/primus 20131226-1
multilib/lib32-primus 20131226-1
My bumblebee.conf: config
Logs while starting Steam: steam_logs
Dota 2 starts with launch option:
primusrun %command%
Logs while starting Dota2 form Steam: steam_logs_doat2
Can anybody help me?
Last edited by artem.jackson (2015-01-20 09:26:57)Alad, I have noticed only one similar error:
ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded: ignored
You probably want to start a 32-bit application with bumblebee on a 64-bit system. See the "Note" box in Installation.
but I have all needed lib32.
Or am I wrong?
Last edited by artem.jackson (2015-01-12 17:50:54) -
Macbook Pro Retina mid 2012 low fps in bootcamp
Hello,
My English is not so good, so sorry if it's not correct, but I hope anyone could help me.
I have a Macbook Pro Retina mid 2012, 2,3 GHz Intel Core i7, 8 GB ram, 250 GB SSD.
My problem is when I go to bootcamp for gaming I get realy low fps. The most games start at 30 fps, but then they drop immediately to 8/9 fps and a second later back to 30 fps.
It's like a car, when you drive to hard you have to slow down, but then you drive to slow so you need to go faster. He speed up and a second or 2 later he kicks on the brakes and a moment later he speed up again and kicks again on the brakes.
Even with al the game setting on realy low and the lowest resolution. And that al the time in every game. My bootcamp is Windows 8 but in Windows 7 did I have the same problem. I did already a SMC reset and Pram reset and 5 clean installs. But nothing works. I installed al the updates in OS X en in Windows. There al alrealy some forums about this problem, but by them was a SMC reset enough. Maybe something is wrong with my Nvidia grapihc card. The problems starts everytime when the Nvidia card need to do this work.
it's quite an annoying problem, it's not a cheap laptop, but my old laptop ( 2 years old ) are the gaming performs better compared to this one. I think the problems start after this SMC update http://support.apple.com/kb/DL1559?viewlocale=en_US but I'm not quite sure.
Are there more people with this problem, please let me know. And maybe how you solve it.
I hope realy if any one could help me.
If you know a anser, please give it in a comment
Thanks,
Gerwin Tiemens
<Email Edited by Host>Hello gerwintiemens,
I recommend resetting your SMC and your PRAM. Perhaps even a safeboot as well.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
All the very best,
Sterling -
Getting low FPS on MacBook Pro Retina 15" (2012) even after resetting SMC
I am getting very low FPS on Guild Wars 2 (between 25 and 40) and on Dibalo averaging at about (30 FPS) when playing on 1440 Resolution and Medium Settings. I've seen videos online with much better FPS using the same configuration as my Mac.
I've reset the SMC, PRAM and made sure that the nVidia card is running using gfxCardStatus
Anyone knows if this could be a faulty GPU Card?I would make sure it's not running the game in the screens native res as that would be soo high even a gaming laptop would struggle
-
WOW! iChat lower fps from 15fps to 1 in 15 first seconds
After starting video chat iChat rapidly lower fps from 15fps to 1 in 15 first sec
(checked in connection doctor)
no problems before perfoming clean install from 10.2
iBook 800/10.4.3 clean install/iSight 1.0.3 and Virex is not installed
many Mac OS X (10.4.3)Hi dimmu,
Check through this FAQ which has much of the above and probably soem I missed at the time
http://discussions.apple.com/thread.jspa?threadID=278760
In certain circumstances and old version of iChatUSBCam for Panther can cause this problem when moving up to Tiger.
Ralph -
Hi
I have swf-app with sizes 960x480. And test it on Iphone 3gs and Iphone 4. If i build app with requestedDisplayResolution=high, i have low fps on Iphone 4, but the 3gs shows good results. I have bitmaps about 300x300 sizes (and less) on stage.
Also I use stageQuality=BEST, because I need a smooth movement of fractional coordinates
how you use requestedDisplayResolution and what fps you see?
Thx
P.S.
Tested on air 3.1, 3.0 and 2.7
<fullScreen>true</fullScreen>
<renderMode>gpu</renderMode>Are you using exactly the same assets on both the iPhone 4 and 3GS, because if so it makes no sense that it'd run better on the 3GS. I'd say that using stageQuality=BEST is probably the cause of your problems, the default setting is MEDIUM for a reason.
-
DOTA2 low fps during hero picking phase
Usually I have ~50FPS rate, but when I picking hero in PvP game (with bots it works great), my FPS downs to 9-10 and sound is cracking.
Before I played well, in common I use proprietary driver, but some days ago, when I reinstall system with encryption, I also tried non-proprietary driver, which was bad idea for my NVIDIA GeForce 9600 GSO (too many artifacts and very low FPS).
So I deleted "free" driver and installed proprietary driver. Mb I forget to delete some free-driver packages, or forget to install some non-free driver componets, mb some libraries (provided by Steam) are conflicting with system`s librararies. Anyway I dont know what to do, my attempts to find a solution in Internet led me here.
I`ll be very greatful if you help me! But you must know that I`m not a Linux-guru, so write me all commands I need.First of all, whether you have 1GB/512mb/256mb of vga memory doesnt mean much in terms of performance, it all depends on your specific gpu unit whether its a 5650M, 6570M, etc. In your case your gpu does seem to be able to run most older games okay. Measuring fps in lobbies doesnt mean much either since there's hardly anything there for your gpu to render. You say you begin with 60fps and then drop to about 20fps midgame, presumably when the action is getting most hot. You could perhaps try lowering your graphical settings a bit or maybe your resolution. Alternatively the problem may also lie with your internet connection.
-
Calls to MCU 4215 with low fps
Hello,
Just installed a MCU 4215. When i call from my endpoints (SX20), the video quality is very poor. Checking the info of the call (attached img) the only thing that comes to my attention is the low fps rate...
The endpoint and MCU are connected to the same switch.
Ideas?Check the duplex mode on the devices
Sent from Cisco Technical Support Android App -
Hi guys!
So basically the problem is low FPS while playing games like Witcher 2 or "older" game like Battlefield BC2.
Using fraps I got like average 20FPS on High setting.
So I tried everything, changing nvidia settings, using gameboost, killing Toshiba software, power settings....
Does anyone have any suggestions how to resolve this except updating graphic driver (we all know Toshiba's policy about that). Is there any process, Win 7 catch or preinstalled Toshiba program that is blocking graphic card for max usage?
Thank You!Hey guys!
So, I have installed new beta drivers 285.38 and underclocl core clock to 675, but still there are no changes regarding my FPS. I got around 30FPS in Battlefield on medium settings and that is when I adjust GPU core back to 775 WTF?!?!?
Here are my nvidia setting, can you compare it to yours please:
Ambient occlusion: Off
Anisotropic filtering: Application - controlled
Antialasing - gamma correction: On
Antialasing-mode: Application - controlled
Antialasing-settings: Application - controlled
Antialasing-transparency: Off
CUDA_GPU: All
Max. pre-rendered frames: 3
Multi display: Single display perf. mode
Power management: Adaptive
Texture filtering - Anisotropic sample: Off
Texture filtering -Megative LOD: Off
Texture filtering -Quality: Quality
Texture filtering -Trilinera O.: On
Threaded opt.: Auto
Triple buffering: On
Vertical sync: Use the 3d app. settings
Also 3D button does not work properly anymore. Everytime I press it , game minimize.
Please help! -
MSI X800XT PE (Low fps problem)
Ok, I dont know why I didnt think of this before, but I've been searching all kinds of forums lately trying to get find some answers as to why I seem to be getting really low fps with my MSI X800XT PE.
Theres no doubt about it. These cards are quick. The problem I am having is that it just doesnt seem to be kicking out the right amount of FPS during game play. For example, when I run 3dMark'05 (ver 1.1.0), (I only have the free version) My total at the end of the test is 5621. This is after I changed to the Omeaga Drivers (2.5.90) Before I upgraded to them, I was still running the catalyst 4.10 drivers and getting about 1000 points less.
As for Counter Strike:Source I did the video stress test. Video settings are all set to the default recommendation for my system. So everything is on high, Reflect world, Anisotropic 8*, antialiasing 6*, vertical sync disabled. My score was 83.1fps.
According to just about everyone else who owns an X800 Pro or XT PE they are all getting much higher results than myself.
I am also running DirectX 9.0c (4.09.0000.0904)
I would really appreciate it if anyone has any ideas as to why my scores are so low.
If you require more info please give me a shout.
Look forward to your reply.
DOA.Thanks for the feedback and links guys.
Basically I've done most of my comparing on futuremarks page. After you do a test it asks you wether or not you want to submit and compare. So I select all the hardware I own and see what others got. Looking through the pages it just seems that my score is in the last few pages. Another thing when I play CS:Source, during game play I see the fps drop down to 20fps during a heavy battle esp if there is water in the area. Do you guys get that. Theres a console command that shows you how many fps you get a second. Bare in mind that I play it @ 1600*1200 AS 8* AA 6*. I just thought that these cards would hardly ever drop to 20fps no matter the res and detail. -
6600GT: too low FPS in UT2004
Hi,
I now played UT2004 Onslaught to test my 1 week old MSI NX6600GT-VTD128 AGP 8x and I get about 60FPS in 800x600@32. Sometimes, when there is more action FPS get down to ~35!
Seems to be too low...?
The latest NVidia driver is installed. I turned anti-aliasing as well as anisotropic filtering off. System performance (don't know the exact english term, I have a german installation - it's here the 3rd item in the NVidia configuration tool) is set to "Performance".
UT2004 settings:
Texture Detail: Normal
Character Detail: Lower
World Detail: Normal
Physics Detail: Low
Dynamic Mesh LOD: Normal
Decal Stay: Normal
Character Shadow: None
x Decals
x Dynamic Lighting
x Coronas
x Projectors
x Wheater Effects
Fog Distance: 0
I also ran DriverCleaner but the low FPS remain...
Thanks for your help!To make sure that thar actually is a performance loss, do the benchmark in UT2004 and compare the results to this chart:
http://www20.graphics.tomshardware.com/graphic/20041004/vga_charts-05.html
I'm no nVidia expert, but I gues your results should be about the same as a FX5900XT. -
Lenovo Y510p low fps after fans running on high
I had to take apart my lenovo y510p and change the dc port. Now everything is working fine but there seems to be a graphics card issue or something. After I play a game on medium~high settings, the fan blows on both sides on high speed it seems, then after a couple minutes, my frames drop from ~30 to 1-5fps. I have no clue why this happens, the graphics card is updated. This happens when I play battlefield or war thunder. What could be the issue? should I take my laptop apart again?
Hi Chargersrool,
Welcome to the Forums
As per the query we understood that you are facing issue with low FPS in your Lenovo Y510p laptop.
Does this issue perists while playing all the games or only in particular games?, try to update the graphic driver and check for the issue.
Click here for the graphic driver for windows 7.
Click here for the graphic driver for windows 8.
Click here for the graphic driver for windows 8.1.
Hope this helps. Do post back if the issue persists.
Best regards,
Ashwin. S -
GT70 20C Low FPS while playing without charging
Low FPS while playing without charging. I turn off economy mode and still have problems with FPS.
Any suggestions?:(This is cause by Nividia Geforce Experience which limits the fps to 30 when gaming with battery due to energy saving technique. If you want more performance for the cost of shorter battery life. Open NVidia GeForce Experience. Click Preference and go to Battery. Uncheck set frame rate target when on battery.
-
Macbook pro ridiculously low fps
I have an almost brand new macbook pro (had it for a couple of weeks) and i use it for gaming it use to able to run games like mass effect,dragon age, halo 2 smoothly at high setting but one day all of a sudden it became really really slow,now some time it run smoothly for a few minutes when i first start the game but the gets really low fps (around 1~2). is there somthing wrong with my mac hardware?
heres my system spcs:
System Information
Time of this report: 10/8/2010, 01:11:21
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600)
Language: English (Regional Setting: English)
System Manufacturer: Apple Inc.
System Model: MacBookPro7,1
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 4096MB RAM
Available OS Memory: 3830MB RAM
Page File: 1650MB used, 6008MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: NVIDIA GeForce 320M
Manufacturer: NVIDIA
Chip type: GeForce 320M
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN10DE&DEV_08A0&SUBSYS_00C2106B&REVA2
Display Memory: 1910 MB
Dedicated Memory: 251 MB
Shared Memory: 1659 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: Color LCD
Monitor Id: APP9CC7
Native Mode: 1280 x 800(p) (60.223Hz)
Output Type: Internal
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0011.9682 (English)
Driver Version: 8.17.11.9682
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/9/2010 16:03:28, 11912296 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-4BE0-11CF-0956-C9201CC2C535}
Vendor ID: 0x10DE
Device ID: 0x08A0
SubSys ID: 0x00C2106B
Revision ID: 0x00A2
Driver Strong Name: oem1.inf:NVIDIASetA_Devices.NTamd64.6.1:Section034:8.17.11.9682:pciven_10de&dev_08a0&subsys00c2106b
Rank Of Driver: 00E60001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_CI have an almost brand new macbook pro (had it for a couple of weeks) and i use it for gaming it use to able to run games like mass effect,dragon age, halo 2 smoothly at high setting but one day all of a sudden it became really really slow,now some time it run smoothly for a few minutes when i first start the game but the gets really low fps (around 1~2). is there somthing wrong with my mac hardware?
heres my system spcs:
System Information
Time of this report: 10/8/2010, 01:11:21
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600)
Language: English (Regional Setting: English)
System Manufacturer: Apple Inc.
System Model: MacBookPro7,1
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 4096MB RAM
Available OS Memory: 3830MB RAM
Page File: 1650MB used, 6008MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: NVIDIA GeForce 320M
Manufacturer: NVIDIA
Chip type: GeForce 320M
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN10DE&DEV_08A0&SUBSYS_00C2106B&REVA2
Display Memory: 1910 MB
Dedicated Memory: 251 MB
Shared Memory: 1659 MB
Current Mode: 1280 x 800 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: Color LCD
Monitor Id: APP9CC7
Native Mode: 1280 x 800(p) (60.223Hz)
Output Type: Internal
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0011.9682 (English)
Driver Version: 8.17.11.9682
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/9/2010 16:03:28, 11912296 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B71E3E-4BE0-11CF-0956-C9201CC2C535}
Vendor ID: 0x10DE
Device ID: 0x08A0
SubSys ID: 0x00C2106B
Revision ID: 0x00A2
Driver Strong Name: oem1.inf:NVIDIASetA_Devices.NTamd64.6.1:Section034:8.17.11.9682:pciven_10de&dev_08a0&subsys00c2106b
Rank Of Driver: 00E60001
Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
Maybe you are looking for
-
Transferring pages from one iweb site to another
Thank you for any feedback or suggestions. I have finally gotten a separate .mac & iweb account for my business. Now I would like to take my business pages/site off my personal iweb account and transfer everything to the business iweb. How do you do
-
Hi guys! I do not know if this is a problem anyway but it worries me. I just bought MSI Dominator GT72 Dragon Edition yesterday. I enjoy using the laptop but the start up really bothers me very much. The laptop is switched off for few hours, and when
-
Images with www in URL will not load
Okay so suddenly Firefox has decided that it cannot read file URLs that contain the www prefix. This means http://timelesschaos.com/transferFiles/411tribalChallenge.gif will load fine, but http://www.timelesschaos.com/transferFiles/411tribalChallenge
-
Starting OC4J_BI_FORMS automatically after reboot on Win2000
Does any know how to configure OCJ4_BI_FORMS to startup automatically after rebooting on win2000. Now, I'm manually starting the OC4J_BI_FORMS instance, and would like to automate the startup after reboot. Thanks in advance Joe
-
I just bought a new computer. In OS X Mountain Lion, I was able to restore from a time machine backup to the new computer so my CS4 apps are installed on the new computer. However, the uninstallers on my old computer won't open. If I select the app i