[Solved] ASUS F3Ka bluetooth doesn't work

Hi everybody!
Can anybody help me with getting bluetooth to work on ASUS F3Ka please?
Here is the dmesg output:
[n0ne@darkstar ~]$ dmesg | grep Blue
Bluetooth: Core ver 2.11
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
I've got bluetooth daemon in my DAEMONS array in /etc/rc.conf
BUT it still doesn't work:
[n0ne@darkstar ~]$ sudo -s
[root@darkstar ~]# hcitool inq
Inquiring ...
Inquiry failed.: No such device
Any ideas, please?
Last edited by alcazoid (2008-03-29 22:48:00)

some stuff ive noticed with laptops and bluetooth...
- bluetooth/wireless works in a lenovo i recently installed ubuntu in only after I suspend to ram. This is due to some weird Radio kill switch bug
- sometimes leaving bluetooth and wireless turned on on wiindows has its effects in linux, because windows drivers sometimes do not release control of the hardware. So try a cold boot, and if that doesn't work, a reboot from windows...'
- try variants of leaving the bluetooth switch on/off during the boot process
none of these actually seem like logical solutions, but thats how bluetooth/wireless and linux sometimes is..good luck!

Similar Messages

Wifi and bluetooth doesn't work on my iphone 4s

Wifi and bluetooth doesn't work on my iphone 4s ios 6.1.2 since 1 month! Please help

Hi!
I had the same problem, after trying all resets and sugestions the problem persisted.
I took it to my carrier and they done their own test and gave me a new iPhone. Simple.
Problem solved!
If your Iphone is under warranty don't worry about it. But try a hard reset.
Good luck!

Bluetooth doesn´t work anymore

I am using an Iphone 5s. After I updater to IOS 7.1.2 bluetooth doesn´t work anymore. I ran all troubleshooting methods that Apple advised with no success. Any idea?

What exactly are you connecting to?
iOS: Supported Bluetooth profiles

Bluetooth doesn't work after sleep mode wake up

Okay, so my computer goes to sleep while in Windows XP and I wake is up. I have my bluetooth mouse and keyboard hooked up to it and I try to wake them up. My mouse doesn't reconnect. I notice that my computer also says that it's not connected to my wireless network, but the my web browser and messenger still connect fine. I check my bluetooth preferences to find out that nothing is connected and when I try to reconnect it doesn't work. This never used to happen and it just recently started when I reinstalled windows this past week. The only way I could get the devices to reconnect was to reboot and even then when my computer goes back to sleep they still disconnect.
Anyone else have this problem... or better yet, an answer?

How did you actually solve your problem ?
I have this too on a macbook 2.4.
any help appreciated, this is very annoying.
I installed all latest updates to windows/bootcamp. Did not help.

Bluetooth doesn't work after E90 firmware update!

Nokia staff - help needed!
Bluetooth has stopped working after E90 firmware update.
The following on-screen message is shown: "Unable to perform Bluetooth operation!"
P.S. Reinstalling firmware via Nokia software update doesn't help at all. If connectivity problem still can be solved with USB cable, the worst tning is that I can't use my phone's BT handsfree when driving.

Hi hanzzi
No information as to what device you are using, but try deleting E:\CITIES + .qf file from memory card then restart OVI Maps application to re-define folder structure required to download regional mapping using OVI Suite.
Happy to have helped forum in a small way with a Support Ratio = 37.0

[SOLVED]Xorg 1.8 doesn't work

Hello, I've just upgraded to linux-firmware and the newest X.org, which doesn't work.
Xorg.0.log tells me:
[ 934.318]
X.Org X Server 1.8.1
Release Date: 2010-05-11
[ 934.322] X Protocol Version 11, Revision 0
[ 934.323] Build Operating System: Linux 2.6.33-ARCH x86_64
[ 934.325] Current Operating System: Linux staerseus 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
[ 934.326] Kernel command line: root=/dev/disk/by-uuid/727c4683-ee4c-4b32-8a59-370264cb7d9f ro i915.modeset=1 init=/sbin/bootchartd
[ 934.327] Build Date: 26 May 2010 07:50:07PM
[ 934.329]
[ 934.330] Current version of pixman: 0.18.2
[ 934.331] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 934.334] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 934.338] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 21 10:15:38 2010
[ 934.340] (==) Using config file: "/etc/X11/xorg.conf"
[ 934.341] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 934.343] (==) No Layout section. Using the first Screen section.
[ 934.343] (==) No screen section available. Using defaults.
[ 934.343] (**) |-->Screen "Default Screen Section" (0)
[ 934.343] (**) | |-->Monitor "<default monitor>"
[ 934.343] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 934.343] (==) Automatically adding devices
[ 934.343] (==) Automatically enabling devices
[ 934.343] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 934.343] Entry deleted from font path.
[ 934.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 934.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 934.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 934.343] (II) Loader magic: 0x7ce880
[ 934.343] (II) Module ABI versions:
[ 934.343] X.Org ANSI C Emulation: 0.4
[ 934.343] X.Org Video Driver: 7.0
[ 934.343] X.Org XInput driver : 9.0
[ 934.343] X.Org Server Extension : 3.0
[ 934.352] (--) PCI:*(0:0:2:0) 8086:2a42:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 934.352] (--) PCI: (0:0:2:1) 8086:2a43:1734:113f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2100000/1048576
[ 934.352] (II) Open ACPI successful (/var/run/acpid.socket)
[ 934.352] (II) LoadModule: "extmod"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 934.352] (II) Module extmod: vendor="X.Org Foundation"
[ 934.352] compiled for 1.8.1, module version = 1.0.0
[ 934.352] Module class: X.Org Server Extension
[ 934.352] ABI class: X.Org Server Extension, version 3.0
[ 934.352] (II) Loading extension MIT-SCREEN-SAVER
[ 934.352] (II) Loading extension XFree86-VidModeExtension
[ 934.352] (II) Loading extension XFree86-DGA
[ 934.352] (II) Loading extension DPMS
[ 934.352] (II) Loading extension XVideo
[ 934.352] (II) Loading extension XVideo-MotionCompensation
[ 934.352] (II) Loading extension X-Resource
[ 934.352] (II) LoadModule: "dbe"
[ 934.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 934.352] (II) Module dbe: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension DOUBLE-BUFFER
[ 934.353] (II) LoadModule: "glx"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 934.353] (II) Module glx: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (==) AIGLX enabled
[ 934.353] (II) Loading extension GLX
[ 934.353] (II) LoadModule: "record"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 934.353] (II) Module record: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.13.0
[ 934.353] Module class: X.Org Server Extension
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension RECORD
[ 934.353] (II) LoadModule: "dri"
[ 934.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 934.353] (II) Module dri: vendor="X.Org Foundation"
[ 934.353] compiled for 1.8.1, module version = 1.0.0
[ 934.353] ABI class: X.Org Server Extension, version 3.0
[ 934.353] (II) Loading extension XFree86-DRI
[ 934.354] (II) LoadModule: "dri2"
[ 934.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 934.354] (II) Module dri2: vendor="X.Org Foundation"
[ 934.354] compiled for 1.8.1, module version = 1.2.0
[ 934.354] ABI class: X.Org Server Extension, version 3.0
[ 934.354] (II) Loading extension DRI2
[ 934.354] (==) Matched intel as autoconfigured driver 0
[ 934.354] (==) Matched vesa as autoconfigured driver 1
[ 934.354] (==) Matched fbdev as autoconfigured driver 2
[ 934.354] (==) Assigned the driver to the xf86ConfigLayout
[ 934.354] (II) LoadModule: "intel"
[ 934.354] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.354] (II) Module intel: vendor="X.Org Foundation"
[ 934.354] compiled for 1.7.6, module version = 2.11.0
[ 934.354] Module class: X.Org Video Driver
[ 934.354] ABI class: X.Org Video Driver, version 6.0
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)
[ 934.356] (II) UnloadModule: "intel"
[ 934.356] (II) Unloading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 934.356] (EE) Failed to load module "intel" (module requirement mismatch, 0)
[ 934.357] (II) LoadModule: "vesa"
[ 934.357] (WW) Warning, couldn't open module vesa
[ 934.357] (II) UnloadModule: "vesa"
[ 934.357] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 934.359] (II) LoadModule: "fbdev"
[ 934.359] (WW) Warning, couldn't open module fbdev
[ 934.359] (II) UnloadModule: "fbdev"
[ 934.359] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 934.360] (EE) No drivers available.
[ 934.362]
Fatal server error:
[ 934.364] no screens found
[ 934.365]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 934.370] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 934.372]
What does the problem with modules mean? Archlinux was warning me, that "in future releases /etc/modprobe.d/framebuffer_blacklist.conf.save will be ignored, but it is the same file as /etc/modprobe.d/framebuffer_blacklist.conf.
I don't understand, why it cannot find any screens (I use a laptop screen)
I tried to start with and without xorg.conf, which is:
Section "Device"
Identifier "Intel X4500MHD"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "DRI" "true"
Option "AccelMethod" "uxa"
Option "MigrationHeuristic" "greedy"
EndSection
The graphic driver I use is xf86-video-intel-newest from archstuff, but it is the same version as xf86-video-intel.
I am not sure if I provided all needed info, but I hope so. Thank you for your help.SOLVED
Last edited by Staerseus (2010-06-21 09:18:03)

Use the arch version. It is actually built against the xorg version that you are using... here is the relevant section of your log:
[ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)

[SOLVED] External USB mouse doesn't work

I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
Last edited by avli (2011-07-14 16:53:15)

Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
Hope this information will be helpful for users who probably faced with the same problem. Thank you!

I have an Iphone4 and recently bought a car that has bluetooth. The bluetooth doesn't work when I tell it a name to call. Has anyone else had this problem?

I have a iphone4 and recently bought a car that has bluetooth. When I tell it a name to call it doesn't work. If I tell it the phone # it works. Has anyone had this trouble and how can I fix it?

pae59 wrote:
I have a iphone4 and recently bought a car that has bluetooth. When I tell it a name to call it doesn't work. If I tell it the phone # it works. Has anyone had this trouble and how can I fix it?
In most cars with built-in BT hands-free systems it is the car's system that does the speech to text conversion and lookup, not the phone's. so there's nothing that can be done in an iPhone forum to help you. Try the customer support site for the car. You can tell it's the car system if the contact list is downloaded to the car and displayed on the car's screen (if it has one).

[SOLVED] openbox menu command doesn't work with &&

I'm now using openbox-session only.
I'd like to run a program after something was done correctly:
zenity --question && killall openbox
I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
However, the previous command "zenity" is run only.
In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
<item label="Exit">
<action name="Execute">
<execute>
zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
</execute>
</action>
</item>
Please, give me any idea. Thank you.
Last edited by mairoo (2009-09-09 10:06:17)

hbekel wrote:
You'll need to use a shell explicitly:
<execute>
sh -c 'command1 && command2'
</execute>
I flagged "solved" thanks to your help. It works good. Thank you.

Bluetooth doesn't work on iPhone6 and no restore from iTunes

Once again Apple released a buggy phone. Much like the iPhone5, iPhone6 has already shown issues in the connectivity department. Thousands of users have already blogged about it all over the internet, so I hope that Apple steps up to the plate and fixes the issue ASAP.
Bluetooth DOES NOT WORK! Tested repeatedly on my 2014 Super Duty, 2012 Jeep Grand Cherokee Overland, 2014 Ford Mustang GT, 2013 Scion FR-S. The device struggled to pair on each and every vehicle. Once finally conncted the voice commands don't work, and good luck trying to answer the phone!! If you manage to (highly unlikely), the conversation is possible only through the phone, not through Bluetooth.
Get with the program Apple. If you released a phone that was not ready for release just to compete with Samsung, LG and HTC, that says a lot about your company. The customers are not guinea pigs - If you intended to use the public as testers, you should have given all of us a considerable discount on the purchase and warned us about the potential bugs.
Additionally the data restore from iPhone5 through both iTunes (v11.4.0.18 which is the latest one) and/or iCloud, doesn't work either. My iPhone5 was successfully updated to IOS8 and backed up on iTunes. As soon as I connected the iPhone6 and tried to restore the backup, an untrue pop up saying "iTunes cannot restore your backup because it's either corrupted or incompatible with this device" showed on my screen. I performed 5 backups of my iPhone5 through iTunes (all of them competed successfully by the way), but each time I tried to restore them on the iPhone6, I got the same error message.
Being an IT guy I started fiddling with settings, hidden files, locked files, until I got it to work by simply checking the "encrypt backup" box in iTunes. It was a big waste of time, and it would be nice if Apple knew about these issues before they released a new phone.
P.S. THe internet is full of blogs about this backup restore issue on iPhone6: obviously I was not the only one.
Get it together Apple.

I'm sorry you're not having a positive experience. I set up two iPhone 6's from iPhone 5 backup's via Wifi and paired both seamlessly with our 2012 Mercedes cars without an difficulty.
I don't know if this is your first post, but you are not writing Apple on this forum. This is a user to user forum and you are only writing other users. If you are not pleased, feel free to contact Apple directly via the link I've supplied. I hope you get your issues resolved to your satisfaction. But because you are having issues, does not mean everyone is. I know lot's of people who now have iPhone 6. None of them have experienced any issues pairing to their cars Bluetooth system, or setting them up from previous phone backups.
https://www.apple.com/feedback/iphone.html

Bluetooth doesn't work on iOS 7.02

iOS 7.02 doesn't work on my Bluetooth kia rundo 2014,,,,apple fix it

First make sure your Bluetooth is turned on by swiping upward and clicking the Bluetooth icon on Control Center. If that isn't the problem make sure you delete your previous pairing completely with the car and with any other previously connected Bluetooth device. The pair the iPhone with the vehicle and with other devices.

(SOLVED) Lock screen suddenly doesn't work as expected

It doesn't matter which lock screen (PIN, swipe, etc.) I choose, after the first unlock (after a reboot or change of lock screen), the phone no longer locks. Using the power button to lock doesn't work and I have the phone set to lock right away on sleep. It was working fine a few hours ago and there wasn't anything new I did to the phone.
Any ideas?
Solved!
Go to Solution.

Hello, I feel pretty dumb. I must've hit the "Disable lock screen" option in the BatteryBot Pro app by accident...I forgot it even had that option.
If anyone's curious how I solved this, I inspected system messages using OS Monitor while reproducing the problem (ie, flipping through lock screen options and turning off/on the screen) and kept seeing the app's name coming up as well as a few others. I'm not sure why it started disabling the lock screen today though; I'm pretty sure I didn't touch the app in the last couple days.
Anyway, sorry for any inconvenience.

HT204387 I have third party bluetooth that used to work perfectly with IOS 6.1 but now I install IOS 7 and now some of the function on my bluetooth doesn't work.

I like to know anyone having problems with bluetooth functions with new IOS 7 ?

I have the same problem with my iPhone4 connected to my VW car via bluetooth. In the previous version of iOS I could start and stop and change tracks in for example Spoitify with my steering wheel buttons but now with iOS 7 it doesn't work anymore.... Apple please correct this ASAP...

HP Rove bluetooth doesn't work with 8.1

Hello I have the HPRove 20" and made the upgrade from windows 8 to 8.1 and noticed that bluetooth is not working I try difference thig trying to fix it like troubleshoting and didn't work can someone please give some ideas on how to fix??
Thank you

setigo
Could we get some additional information so we can assist you? If you could please post your product number for your computer. I am linking a document below that will show you how to find your product number. Knowing the system will enable me to provide you with a more direct answer.
How Do I Find My Model Number or Product Number?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00033108
Please feel free to re-post once you have the needed information.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

[SOLVED] - xset at startup doesn't work

I use the following command to set my screensaver options
xset dpms 30 60 300
After reading the Arch wiki, I found out that this can be made permanent by adding this to the xorg.conf or putting it in ~/.xprofile
Contents of xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "StandbyTime" "2"
Option "SuspendTime" "3"
Option "OffTime" "5"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Dell Inspiron 1520 WXGA+ LCD"
VendorName "Dell"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "BlankTime" "0.1"
Option "StandbyTime" "0.5"
Option "SuspendTime" "1"
Option "OffTime" "5"
EndSection
Contents of ~/.xprofile
xset dpms 30 60 300
I even added this to crontab
0 * * * * ~/Wallpapers/change-background-folder.py
0 * * * * /usr/bin/xset s 30
0 * * * * /usr/bin/xset dpms 60 120 300
@reboot ID=screensaver AFTER=2m /usr/bin/xset s 30
@reboot ID=monitor AFTER=2m /usr/bin/xset dpms 60 120 300
@reboot ID=vu AFTER=1m vuze
Still after doing all this, when I give xset q after a reboot, I get
[theta@boolean-pc ~]$ xset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 3/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
Server does not have the FontCache Extension
The parameters are still all 0.
Please suggest a solution.
Apoorv
Last edited by theta (2011-08-02 15:56:06)

jasonwryan wrote:
If you have set up your .xinitrc the way karol suggests and it still doesn't work, you could delay it kicking in until X has finished loading
(sleep 15s && xset dpms 30 60 300) &
exec yourwm
That may get around the problem bernarcher describes...
Thank you! This works very well for me.
It's the only way I can get it to work.
For the records, so the smart people can find the problem, here is my xorg.conf:
Section "ServerLayout"
Identifier "ServerLayout0"
Screen 0 "BenQ" 0 0
#Option "BlankTime" "0"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "Screen"
Identifier "BenQ"
Device "Intel4000"
Monitor "HDMI2"
DefaultDepth 24
SubSection "Display"
#Depth "24"
EndSubSection
EndSection
Section "Monitor"
Identifier "HDMI2"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Intel4000"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
Option "TearFree" "true"
EndSection
# Read and parsed by systemd-localed. It's probably wise not to edit this manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "se"
EndSection
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Xorg seems to not care about my settings in xorg.conf and sets DPMS values to "0":
$ xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 33
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
Colors:
default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
And the xorg log:
[ 17738.153]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17738.194] X Protocol Version 11, Revision 0
[ 17738.208] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 17738.223] Current Operating System: Linux arch6 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 17738.223] Kernel command line: console=tty0 xen-pciback.hide=(01:00.0)(01:00.1)(03:00.0)(02:00.0)(00:14.0)(00:1d.0) root=/dev/VG/Aroot rw
[ 17738.254] Build Date: 14 April 2014 08:39:09AM
[ 17738.269]
[ 17738.285] Current version of pixman: 0.32.4
[ 17738.314] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17738.314] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17738.375] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 29 22:10:19 2014
[ 17738.390] (==) Using config file: "/etc/X11/xorg.conf"
[ 17738.406] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17738.406] (==) ServerLayout "ServerLayout0"
[ 17738.406] (**) |-->Screen "BenQ" (0)
[ 17738.406] (**) | |-->Monitor "HDMI2"
[ 17738.406] (**) | |-->Device "Intel4000"
[ 17738.406] (**) Option "StandbyTime" "10"
[ 17738.406] (**) Option "SuspendTime" "20"
[ 17738.406] (**) Option "OffTime" "30"
[ 17738.406] (==) Automatically adding devices
[ 17738.406] (==) Automatically enabling devices
[ 17738.406] (==) Automatically adding GPU devices
[ 17738.406] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17738.406] Entry deleted from font path.
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17738.406] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17738.406] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17738.406] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17738.406] (II) Loader magic: 0x804c80
[ 17738.406] (II) Module ABI versions:
[ 17738.406] X.Org ANSI C Emulation: 0.4
[ 17738.406] X.Org Video Driver: 15.0
[ 17738.406] X.Org XInput driver : 20.0
[ 17738.406] X.Org Server Extension : 8.0
[ 17738.406] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17738.408] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf4400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 17738.408] (--) PCI: (0:1:0:0) 1002:67b1:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xe0000000/8388608, 0xf4b00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 17738.408] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17738.424] Initializing built-in extension Generic Event Extension
[ 17738.439] Initializing built-in extension SHAPE
[ 17738.454] Initializing built-in extension MIT-SHM
[ 17738.468] Initializing built-in extension XInputExtension
[ 17738.482] Initializing built-in extension XTEST
[ 17738.495] Initializing built-in extension BIG-REQUESTS
[ 17738.509] Initializing built-in extension SYNC
[ 17738.523] Initializing built-in extension XKEYBOARD
[ 17738.536] Initializing built-in extension XC-MISC
[ 17738.548] Initializing built-in extension SECURITY
[ 17738.561] Initializing built-in extension XINERAMA
[ 17738.573] Initializing built-in extension XFIXES
[ 17738.585] Initializing built-in extension RENDER
[ 17738.597] Initializing built-in extension RANDR
[ 17738.608] Initializing built-in extension COMPOSITE
[ 17738.620] Initializing built-in extension DAMAGE
[ 17738.631] Initializing built-in extension MIT-SCREEN-SAVER
[ 17738.643] Initializing built-in extension DOUBLE-BUFFER
[ 17738.654] Initializing built-in extension RECORD
[ 17738.665] Initializing built-in extension DPMS
[ 17738.677] Initializing built-in extension Present
[ 17738.688] Initializing built-in extension DRI3
[ 17738.700] Initializing built-in extension X-Resource
[ 17738.711] Initializing built-in extension XVideo
[ 17738.722] Initializing built-in extension XVideo-MotionCompensation
[ 17738.734] Initializing built-in extension XFree86-VidModeExtension
[ 17738.746] Initializing built-in extension XFree86-DGA
[ 17738.757] Initializing built-in extension XFree86-DRI
[ 17738.769] Initializing built-in extension DRI2
[ 17738.769] (II) "glx" will be loaded by default.
[ 17738.769] (II) LoadModule: "dri2"
[ 17738.769] (II) Module "dri2" already built-in
[ 17738.769] (II) LoadModule: "glamoregl"
[ 17738.769] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17738.770] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.0, module version = 0.6.0
[ 17738.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17738.770] (II) LoadModule: "glx"
[ 17738.770] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17738.770] (II) Module glx: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.1, module version = 1.0.0
[ 17738.771] ABI class: X.Org Server Extension, version 8.0
[ 17738.771] (==) AIGLX enabled
[ 17738.782] Loading extension GLX
[ 17738.782] (II) LoadModule: "intel"
[ 17738.782] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17738.782] (II) Module intel: vendor="X.Org Foundation"
[ 17738.783] compiled for 1.15.0, module version = 2.99.911
[ 17738.783] Module class: X.Org Video Driver
[ 17738.783] ABI class: X.Org Video Driver, version 15.0
[ 17738.783] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 17738.783] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 17738.783] (++) using VT number 1
[ 17738.783] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 17738.783] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 17738.783] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 17738.783] (==) intel(0): RGB weight 888
[ 17738.783] (==) intel(0): Default visual is TrueColor
[ 17738.783] (**) intel(0): Option "AccelMethod" "sna"
[ 17738.783] (**) intel(0): Option "TearFree" "true"
[ 17738.783] (**) intel(0): Framebuffer tiled
[ 17738.784] (**) intel(0): Pixmaps tiled
[ 17738.784] (**) intel(0): "Tear free" enabled
[ 17738.784] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 17738.784] (II) intel(0): Output VGA1 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output HDMI1 has no monitor section
[ 17738.784] (II) intel(0): Output DP1 has no monitor section
[ 17738.784] (II) intel(0): Output HDMI2 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output DP2 has no monitor section
[ 17738.784] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 17738.784] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 17738.784] (==) intel(0): DPI set to (96, 96)
[ 17738.784] (II) Loading sub module "dri2"
[ 17738.784] (II) LoadModule: "dri2"
[ 17738.784] (II) Module "dri2" already built-in
[ 17738.784] (==) Depth 24 pixmap format is 32 bpp
[ 17738.784] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 17738.784] (==) intel(0): Backing store enabled
[ 17738.784] (==) intel(0): Silken mouse enabled
[ 17738.784] (II) intel(0): HW Cursor enabled
[ 17738.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17738.784] (**) intel(0): DPMS enabled
[ 17738.784] (II) intel(0): [DRI2] Setup complete
[ 17738.784] (II) intel(0): [DRI2] DRI driver: i965
[ 17738.784] (II) intel(0): [DRI2] VDPAU driver: i965
[ 17738.784] (II) intel(0): direct rendering: DRI2 Enabled
[ 17738.784] (==) intel(0): hotplug detection: "enabled"
[ 17738.784] (--) RandR disabled
[ 17738.789] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 17738.789] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 17738.789] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 17738.789] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 17738.789] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 17738.789] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 17738.789] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 17738.789] (II) AIGLX: Loaded and initialized i965
[ 17738.789] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17738.791] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 17738.801] (II) intel(0): Setting screen physical size to 508 x 285
[ 17738.839] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 17738.839] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.839] (II) LoadModule: "evdev"
[ 17738.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17738.840] (II) Module evdev: vendor="X.Org Foundation"
[ 17738.840] compiled for 1.15.0, module version = 2.8.2
[ 17738.840] Module class: X.Org XInput Driver
[ 17738.840] ABI class: X.Org XInput driver, version 20.0
[ 17738.840] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.840] (**) Power Button: always reports core events
[ 17738.840] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 17738.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.840] (--) evdev: Power Button: Found keys
[ 17738.840] (II) evdev: Power Button: Configuring as keyboard
[ 17738.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 17738.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17738.840] (**) Option "xkb_rules" "evdev"
[ 17738.840] (**) Option "xkb_model" "pc104"
[ 17738.840] (**) Option "xkb_layout" "se"
[ 17738.870] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 17738.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 17738.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 17738.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 17738.870] (**) Video Bus: always reports core events
[ 17738.870] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 17738.871] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 17738.871] (--) evdev: Video Bus: Found keys
[ 17738.871] (II) evdev: Video Bus: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 17738.871] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 17738.871] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.871] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.871] (**) Power Button: always reports core events
[ 17738.871] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 17738.871] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.871] (--) evdev: Power Button: Found keys
[ 17738.871] (II) evdev: Power Button: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 17738.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0750.0001/input/input5/event3"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:0750.0002/input/input6/event4"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 17738.873] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 17738.873] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 17738.873] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.873] (II) No input driver specified, ignoring this device.
[ 17738.873] (II) This device may have been added with another device file.
[ 17738.873] (II) config/udev: Adding input device A..... G3 (/dev/input/event5)
[ 17738.873] (**) A..... G3: Applying InputClass "evdev pointer catchall"
[ 17738.873] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.873] (**) A..... G3: always reports core events
[ 17738.873] (**) evdev: A..... G3: Device: "/dev/input/event5"
[ 17738.873] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.873] (--) evdev: A..... G3: Found 12 mouse buttons
[ 17738.873] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.873] (--) evdev: A..... G3: Found relative axes
[ 17738.873] (--) evdev: A..... G3: Found x and y relative axes
[ 17738.873] (II) evdev: A..... G3: Configuring as mouse
[ 17738.873] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.873] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.873] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:E0FF:0002.0003/input/input7/event5"
[ 17738.873] (II) XINPUT: Adding extended input device "A..... G3" (type: MOUSE, id 11)
[ 17738.873] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.873] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.873] (**) A..... G3: (accel) acceleration profile 0
[ 17738.873] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.873] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/mouse0)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/event6)
[ 17738.874] (**) A..... G3: Applying InputClass "system-keyboard"
[ 17738.874] (**) A..... G3: Applying InputClass "evdev keyboard catchall"
[ 17738.874] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.874] (**) A..... G3: always reports core events
[ 17738.874] (**) evdev: A..... G3: Device: "/dev/input/event6"
[ 17738.874] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.874] (--) evdev: A..... G3: Found 1 mouse buttons
[ 17738.874] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.874] (--) evdev: A..... G3: Found relative axes
[ 17738.874] (II) evdev: A..... G3: Forcing relative x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found absolute axes
[ 17738.874] (II) evdev: A..... G3: Forcing absolute x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found keys
[ 17738.874] (II) evdev: A..... G3: Configuring as mouse
[ 17738.874] (II) evdev: A..... G3: Configuring as keyboard
[ 17738.874] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.874] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.874] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:E0FF:0002.0004/input/input8/event6"
[ 17738.874] (II) XINPUT: Adding extended input device "A..... G3" (type: KEYBOARD, id 12)
[ 17738.874] (**) Option "xkb_rules" "evdev"
[ 17738.874] (**) Option "xkb_model" "pc104"
[ 17738.874] (**) Option "xkb_layout" "se"
[ 17738.874] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.874] (WW) evdev: A..... G3: ignoring absolute axes.
[ 17738.874] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.874] (**) A..... G3: (accel) acceleration profile 0
[ 17738.874] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.874] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17739.315] (II) intel(0): EDID vendor "BNQ", prod id 32517
[ 17739.315] (II) intel(0): Using EDID range info for horizontal sync
[ 17739.315] (II) intel(0): Using EDID range info for vertical refresh
[ 17739.315] (II) intel(0): Printing DDC gathered Modelines:
[ 17739.315] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17739.315] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17739.315] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488 1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
It would be nice to find out why the settings was being set to "0".
Last edited by Sne (2014-04-29 20:40:50)

[Solved] ASUS F3Ka bluetooth doesn't work

Similar Messages

Maybe you are looking for