[solved automagically]dvd burner detected... but I can not burn! :(

Hi!
In the latests kernel upgrades (3 or 4 weeks) I lost my dvd burn capabilities...
it was working previously...
apparently dvd drive is detected properly, I can see dvd contents, etc... but brasero do not give me an option to burn on it (just shows .iso file)
that is happening in my desktop, and laptop too.... any idea?
Last edited by luuuciano (2009-12-14 16:09:05)

yep, I tried wodim --scanbus with the same result (as root too)
here, the lshw output:
# lshw
azuloidesk
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=A0C9C96D-8DFE-D511-98A0-001D60839382
*-core
description: Motherboard
product: M2N-MX SE
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev x.xx
serial: MS6C79B33905155
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0403 (08/20/2007)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.3.2
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1GHz
capacity: 2600MHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 2MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: 29
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-cpu:1
physical id: 4
bus info: cpu@1
version: 15.3.2
size: 1GHz
capacity: 1GHz
capabilities: cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 1MiB
*-generic UNCLAIMED
physical id: 123
bus info: parisc@123
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
resources: ioport:900(size=256)
*-serial
description: SMBus
product: MCP61 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:10 ioport:dc00(size=64) ioport:600(size=64) ioport:700(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:dffff000-dfffffff
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.31-ARCH ohci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=8 speed=12.0MB/s
*-usb
description: Keyboard
product: USB Keyboard
vendor: CHESEN
physical id: 4
bus info: usb@2:4
version: 1.10
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-usb:1
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:dfffec00-dfffecff
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.31-ARCH ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096)
*-multimedia
description: Multimedia audio controller
product: SB Live! EMU10k1
vendor: Creative Labs
physical id: 6
bus info: pci@0000:01:06.0
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=EMU10K1_Audigy latency=64 maxlatency=20 mingnt=2
resources: irq:19 ioport:ec00(size=32)
*-input
description: Input device controller
product: SB Live! Game Port
vendor: Creative Labs
physical id: 6.1
bus info: pci@0000:01:06.1
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Emu10k1_gameport latency=64
resources: irq:0 ioport:e880(size=8)
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:dfff8000-dfffbfff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth0
version: a2
serial: 00:1d:60:83:93:82
size: 100000000
capacity: 1000000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.0.33 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100MB/s
resources: irq:27 memory:dfffd000-dfffdfff ioport:d480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
logical name: scsi2
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=8) ioport:cc00(size=4) ioport:c880(size=16) memory:dfffc000-dfffcfff
*-disk:0
description: ATA Disk
product: ST380013AS
vendor: Seagate
physical id: 0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.18
serial: 3JVBP8E2
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=2d172d17
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: e4ab96d3-fb4d-4eb6-b1ab-3349147e44a3
size: 14GiB
capacity: 14GiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2008-10-30 13:28:14 filesystem=ext3 modified=2009-11-24 14:14:40 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2009-11-24 14:14:40 state=mounted
*-volume:1
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
logical name: /mnt/winxp
version: FAT32
serial: 2ce5-cee4
size: 5141MiB
capacity: 5145MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,errors=remount-ro state=mounted
*-volume:2
description: Linux swap volume
physical id: 3
bus info: scsi@2:0.0.0,3
logical name: /dev/sda3
version: 1
serial: b5b78777-7852-4575-a8c2-7b8e57283778
size: 1027MiB
capacity: 1027MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@2:0.0.0,4
logical name: /dev/sda4
size: 53GiB
capacity: 53GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
logical name: /home
capacity: 53GiB
configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback state=mounted
*-disk:1
description: ATA Disk
product: WDC WD1600JS-55M
vendor: Western Digital
physical id: 1
bus info: scsi@3:0.0.0
logical name: /dev/sdb
version: 02.0
serial: WD-WMANM1362942
size: 149GiB (160GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=013e1410
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdb1
logical name: /mnt/enos2005
version: 3.1
serial: c8bfcbc3-28a7-5d4a-b1f4-ef372f1b6da6
size: 149GiB
capacity: 149GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2005-12-12 22:57:50 filesystem=ntfs label=ENOS2005 mount.fstype=fuseblk mount.options=rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:24
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26
*-display
description: VGA compatible controller
product: C61 [GeForce 6150SE nForce 430]
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:22 memory:de000000-deffffff memory:c0000000-cfffffff(prefetchable) memory:dd000000-ddffffff memory:dffc0000-dffdffff(prefetchable)
*-pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k8temp
resources: irq:0
and, looking at that, the k8temp do not work properly, it shows an error at startup (that happened in the latests kernel upgrades too, I guess)
Currently I have this in my fstab (as it was working previously)
/dev/cdrom /media/cdrom   auto    iocharset=utf8,ro,user,noauto,unhide   0      0
/dev/cdrom1 /media/cdrom1   auto    iocharset=utf8,ro,user,noauto,unhide   0      0
/dev/dvd /media/dvd   auto    ro,user,noauto,unhide   0      0
but I tried commenting those lines without not luck
Last edited by luuuciano (2009-11-24 21:34:49)

Similar Messages

  • I edited a video with iMovie but I can not burn it to DVD because I get an "error" answer number 49!How may I correct this?

    I took the video with my iPAD 2 then I send it to my Macbook through iTunes and edited the movie. Now everything is ready to be put on a DVD but I tryed to "finalise"but could get there because once for an error number 50, then I tryed to export it and got another error 49 ... I would like to put it on a DVD beore this saterday because the family is going back home and wold lke to have the movie of their just born baby at home.
    Can somebody help me?
    Thanks
    Cesar

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • All of a sudden I cannot burn DVD's anymore but I can still burn CD's?

    I was burning a movie in popcorn and an error came up saying that the drive failed to write to disk. I am using TDK-R DVD's. Previously I had burned 25 of these same DVD's a couple of days earlier. So I tried to burn a music CD and I was successful. My next move to see if it was maybe the popcorn program was to try and burn a DVD of one of my own movies in DVD Studio Pro - it failed.
    Please help!!!!!

    If your Mac is still under warranty, palpentine, then head to Apple , who will simply replace your drive.
    If not, then try a cleaning disc, . DVDs need a cleaner lens than CDs because of the tighter data specs/ denser data. The first sign of a dirty lens is usually a problem with burning DVDs, then reading DVDs, before losing the capability to burn, then use CDs too, etc etc. Once this starts to surface the quicker you clean the drive the greater your chances of success.
    I know many people believe that the CD and DVD reading/ burning processes are independent of each other, but, in fact they both use the same lens (as is easily seen if you ever dismantle one of these drives) , and any problems with its cleanliness almost invariably show up through problems with DVD reading and burning first.
    Cheers
    Rod

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

    System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
    Dear Apple Support,
    since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
    The Finder burn dialog hangs at the "ending burning process". It is so annoying.
    It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
    The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
    Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
    I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
    Whats about your slogan "It just works"?
    What happens with the quality of Apple?
    Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
    So i don't understand what are you doing with Tiger?
    It's so annoying!
    Regards
    Roessner

    Hi,
    I've got exactely the same problem and I have no solution at the moment.
    Is there someone who could help us, please?
    Thanks !
    you can reply to : [email protected]

  • Installed New DVD burner, but it will not burn DVDs

    I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
    Thank you
    Nelson Rego

    If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
    <http://www.patchburn.de>

  • I can not burn dvds anylonger with my MacPro. Why ?

    Hi everyone. I already posted this message in another thread but got no useful replies.
    Configuration: MacPro Early 2008, MacOSX 10.6.8
    I can not burn dvds anymore and do not know why. I can play dvds and cds though!
    The following is the usual error message displaying after clicking the button burn :
    I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
    I have reset the PRAM and the SMC (System Management Controller). Nothing.
    I have set up a new user account with admin privileges but it did not work.
    Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
    I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
    Any piece of advice ?
    Thank you !
    Paolo

    Hi everyone. I already posted this message in another thread but got no useful replies.
    Configuration: MacPro Early 2008, MacOSX 10.6.8
    I can not burn dvds anymore and do not know why. I can play dvds and cds though!
    The following is the usual error message displaying after clicking the button burn :
    I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
    I have reset the PRAM and the SMC (System Management Controller). Nothing.
    I have set up a new user account with admin privileges but it did not work.
    Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
    I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
    Any piece of advice ?
    Thank you !
    Paolo

  • Can not burn itunes play list to dvd disk

    i have windows xp. computer is 2 yrs old. i am using itunes version 6.0.5 all of a sudden i can not burn my itunes purchased music to a dvd disk. it says initalzing but is not copying songs to disk. how do i figure out if it is a problem with itunes or my dvd burner. never had this problem before.

    VIA Technologies, Inc. P4M266A-8235
    iTunes 6.0.5.20
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: Pfc (2.5.0.196), ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: S3 Graphics ProSavageDDR (Microsoft Corporation)\S3 Compatible Display Adapter
    IDE\DiskWDCWD1200BB-00DWA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVDRAM_GSA-4081B_______________A100___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomJLMSXJ-HD166S__________________________DS18___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: JLMS XJ-HD166S, Rev DS18
    Drive is empty.
    E: HL-DT-ST DVDRAM GSA-4081B, Rev A100
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 255:59 on blank CD.
    Track 1, start time 00:00:00
    Get drive speed succeeded.
    The drive CDR speeds are: 4.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4 0.
    The drive DVDRW speeds are: 4 0.
    The last failed data CD or DVD burn had error code -128(0xffffff80). It happened on drive E: HL-DT-ST DVDRAM GSA-4081B on DVD+R media at speed 0X.

  • I can not burn a cd in itunes.  It tells me the drivers for importing and burning cd and dvds are missing.  It tells me to reinstall itunes.  I have done this several times and it does not help.

    I can not burn a cd in itnes.  When I open itunes it tells me the dirvers for importing and burning cds & dvds are missing.  It tells me to reinstall itunes.  I have done this and it does not help.  How can I solve this problem?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • My Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

    my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem

    Carlos-
    Start by signing out and back in to see if it will see the subscription: 
    How to sign in and sign out of creative cloud (activate/deactivate)
    If the apps are installed fine and close after launch see this link:
    CC applications close immediately after launch
    If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise  you on a solution
    Pattie

  • My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem.  I think someone of you must help me to

    My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
    But I can not use it in the USA, so could you mind help me to solve that problem.
    I think someone of you must help me to solve this problem !
    Details:
    SN:F2*****FDR
    <Edited by Host>

    See the response in your other thread:
    https://discussions.apple.com/message/24641427#24641427

  • HT4993 My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem.  I think someone of you must help

    My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
    But I can not use it in the USA, so could you mind help me to solve that problem.
    I think someone of you must help me to solve this problem !
    Details:
    <Edited by Host>

    xinyi93 wrote:
    My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
    But I can not use it in the USA, so could you mind help me to solve that problem.
    Yes, the iPhone 5S is a global phone. However, Sprint will only unlock phones for use on GSM networks outside of the U.S. In the U.S., that phone can only be used on Sprint's network.

  • I bought an iPhone 5S in the USA, however he warmed up and took off the screen, I live in Brazil and they do not give assistance to my device, but I can not go back to the U.S. just to change the iphone, what should I do to solve my problem ?

    I bought an iPhone 5S in the USA, however he warmed up and took off the screen, I live in Brazil and they do not give assistance to my device, but I can not go back to the U.S. just to change the iphone, what should I do to solve my problem ?

    I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
    If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport"  it replies it cannot locate it)
    I suppose everything will be fine when you'll be out of censorship....
    Perhaps iOS  Apple Maps are absolutely useless for expatriate in China.
    Use Google Maps instead
    BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

  • Can not burn a Blu-ray disc

    The problem: Can not burn a Blu-ray disc.
    I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”.  I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems.  I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works.  The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's.  Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc?  Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

    Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
    In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements.  I assumed I have to do the same thing with a Blu-ray too.  I've tried following this procedure, also tried using the live file system.  Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting.  One suggestion has been that another program is interfering with premiere elements.  I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
    I Have a lot of great suggestions from you guys and I really appreciate it.  I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system.  I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements.  I appreciate the input regarding Cyberlink software.  I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
    Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1.  Time is money, the cost of a new Blu-ray burner is insignificant.  I will consider this option later.

  • Can not burn back up - checking media message

    I am trying to back up my large collection of songs but a message 'checking media' appears and basically does not accept disc and ejects it after analising/reading for a few minutes.
    If I place the DVD-R first then request the back up it works but only the first DVD. When it requests the second DVD (I require many DVD's to save the large library)it does the 'checking media' process basically jamming the system.
    Is there a way I can cancel the 'checking media'? I've looked at preferences and can not see any way to do so.
    It is a big problem as I can not back my library. I suppose I can not back up the library to a pen instead?
    The DVD's are archive quality and I have thje latest updates.
    Many thanks for any help.

    Nowadays people don't back up to CD/DVD. They get an *external hard drive* and copy over their entire iTunes folder, and whatever else they are backing up.
    The advantages are (1) this method does not depend on iTunes's horribly unreliable burning capability (2) you can look at the external and see that the stuff you backed up is really there. (If you want to see an unhappy person, it is when they try to restore from CD/DVD and discover that it did not burn correctly in the first place.) (3) it lets you back up your other valuable files besides your music.

Maybe you are looking for

  • [CLOSED] Weird mysql/php issue.

    Hi, I am running an ArchLinux as my Server. It's a fresh install. I just configured nginx as my Webserver and then configured MySQL. I wanted to use phpMyAdmin as a manager. I installed it via wget and it worked fine. But all of a sudden it would not

  • Inaccurate import of DWG into CS3 (CS2 okay)

    Boyees... I work in an engineering environment and just updated to CS3. I'm pretty happy except for a foible in the import engine for DWG files. For some reason the import engine has changed and now the size of imported mechanical files is wrong. As

  • Is there a way to include a confirmation message when a form is successfully submitted?

    I have a form that uses both a regular button with javascript, and e-mail submit buttons (depending on which action on the form the user is trying to complete)... I'm trying to find a way to confirm to the user that their form has been submitted. Sin

  • Quality and Realistic Keyboard Samples MainStage

    After spending an afternoon at Guitar Center playing the Korg workstations and the Clavia Nord Stage 88, the Nord has a very realistic B-3 organ sim with LED drawbars. The Rhodes and Wurly pianos are really nice. But... the Stage 88 is $3200+. I alre

  • Audio level higher than needed after encoding

    Hi, I'm editing a film. Voice over level is set to maximum for most part of it. It sounds as it supposed to sound after encoding. There are several parts of the film that are supposed to be quiet. They are set as quiet on the timeline and do sound qu