[solved]BAPI change of language (RFC)

Hi,
I call from a WAS (BSP) with RFC in our ERP-System. The RFC-FM contains a simple call of BAPI PARTNER_CHECKPASSWORD.
There are 2 possible languages in BSP. Problem: watever language is selected, the returnmessages from FM are always in german.
So I added a parameter "i_spras" to my RFC-FM and put some codeing in it:
* Sprache setzen
if not i_spras is initial.
SET LOCALE LANGUAGE i_spras.
SET LANGUAGE i_spras.
endif.
nothing changed: returnmessage is always in german.
Is there a chance to get the messages in english ?
Message was edited by: Martin

Hello ,
did you check the language parameter in the RFC-destination - logon data (SM59).
Regards Wolfgang

Similar Messages

[SOLVED] WRT300N change language?

Hi everyone!
Ive got a problem, I dont seem to find a way to change my language on my WRT300N router to english.
A little background. Sent my router in for repair and got an new back that has germany language in the setup and I cant change it. The nearest I got was to the page where I upgrade my firmware and just above that option there is another option that says "Wählen Sie die Sprache aus:" and there I can choose "Englisch" and I do that but nothing is happening. I have also downloaded a new english firmware 2.00.20 but that doesnt solve my problem either.
So if there is anyone who knows what I should do to solve this Im very happy because its so frustating to try to configure in an language that I dont understand.
Message Edited by Johnsson on 11-20-2008 05:38 AM

Hi again!
Your advice didnt work for my router, got an "404 file not found" error when I tried to connect to http://192.168.1.1/language.htm
But I Finally managed to solve it. I did an last try to download an firmware from my local linksys site and choosed "Englisch" and upgraded and it worked.
Now I can finally do some more advanced setup

[SOLVED] How change language in Cinnamon Desktop Environment

Hi,
I wanted to change the language of cinnamon but I do not see any option to change the language. I have installed cinnamon-translations.
Thanks for all help
Last edited by formoza (2014-08-01 20:00:31)

Things changed recently with the introduction of the "mintlocale" package in Linux Mint, which now handles this in Cinnamon.
For now, to add new locales you need to still use the /etc/locale.gen and locale-gen way of adding them.
To change language used, you need the mintlocale package installed.

[SOLVED] Changing Chromium language

Hello.
How do I change the language on chromium. I tried to change it in "languages and spell-checker settings" but I can't get it to change to danish.
Any help?
Last edited by Nesrail (2011-11-02 04:30:30)

How about this?
LANG=da_DK chromium

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

How to change PO Language Key

Hi people , hope anyone can help with this. How can i change de Language Key at the comunications TAB on the PO Header ? it`s grey from the start and i´m not being able to change it , even before i enter the Vendor. I´ve checked the IMG config menus and it`s marked as "Optional" but still i´m not being able to change it. I know this language key comes from the vendor master , but the idea of my client is to be able to change it while doing the PO . Is it posibble ? thanks a lot !

Hi
Pls let us all know , how you solved this issue .. Pls share the steps followed by you
Rgds
Ashok

How can I change the language of the dictionary in iPhone's Safari?

Hello,
I'm from Germany but I use my iPhone 5 in English. Yesterday I was using Safari on the iPhone and wanted to check a word I wasn't familiar with. So I highlighted it, touched "define" - and was surprised to see that I was asked if I wanted to download a dictionary. Okay, so I did. The problem is: It's downloaded the German version. So I can't look-up English words because the dictionary wouldn't recognize them.
My questions are:
1.) Why does the dictionary use a German base when my iPhone runs completely English?
2.) Is there a way to change that? I haven't found an option to do so in the Settings.
The strange thing is that with the iPhone 4 I've had before this was never an issue: The Phone used English and so did the dictionary.
Thank you in advance
Paul

you're not gonna solve that with the language settings ... could be that the dictionary loads the setup language by default, but well here are some simple steps to follow:
1 highlight any word in a text (Safari, Notes anything you want)
2 tap on "define"
3 now in the dictionary panel, tap manage, and add/remove the language or languages that you need. They will be downloaded or removed as needed.
you're done.
ps: reading now that you can't find the "define" option ... then no idea, something went wrong with your setup.

Change the language of Apple Software Update ASU for Windows

Hi,
I'm leaving in Korea and while having my whole computer in English and even iTunes and Quicktime set in English, the Software Updater is in Korean (which is not very useful as I can't really work my way through it).
_I know_ there has been a post about not solving the problem but avoiding it by changing the language settings, but I still need to keep Korean as a language for non-unicode in my settings as I am still working with some Korean software and else my whole display is just filled with question marks. And trust me, Korean and GoogleTranslate is better than just question marks...
So, any idea ? Or maybe some developper passing by willing to add a little menu or at least give the change to download the updater in English ?
Anyway, thanks for any help you may be willing to give !

but ASU re-installs automatically the language files after reboot when I launch the program
(mutter mutter) My fault, sorry. I assumed that ASU wasn't using advertised shortcuts. We've still got a shot at this, I think.
Try deleting all but the en.lproj folders again.
Now head back into the main Apple Software Update program files folder. Right-click on SoftwareUpdate.exe and select "Create shortcut". Rename the shortcut as you please ("English ASU" perhaps?) and drag it out onto the desktop.
Reboot, and now try launching ASU by doubleclicking on the "English ASU" (or whatever) shortcut. Does it launch in English this time?
(With an advertised shortcut, before launching the program a check is run against the installation database to check to see that all the program files and registry entries that ought to be present are indeed present. If there are some missing, a repair install of the program will run in order to replace the missing files and whatnot. That's what caught us last time. But if we launch her from an ordinary shortcut, then we should be able to avoid the repair install replacing all the missing language resources.)

Problem, change the language with dynamic text

I am looking for a way to change simply the language of my flash animation
I work with flash cs4
of course I got Mylocale.as:
import mx.lang.Locale;
class MyLocale extends mx.lang.Locale {
static function start():Void {
var langCode:String = xmlLang;
currentXMLMapIndex = 0;
xmlDoc.load(xmlMap[langCode][0]);
static function setXMLLang(langCode:String):Void {
xmlLang = langCode;
and different xml files in the same folder than my swf file
in string , I ticked : "replace strings automatically during the execution"
with a default language (I am wondering if the problem is not from there)
if I tick: "replace strings manually using the scene language " or "replace strings via actionscript"
my code does not work.
then I kept: "replace strings automatically during the execution"
in my flash animation I have several scenes (pages)
p1, p2, p3, p4
in p1
I created a language bar
then 2 layers inside
Layer--action:
langListener = new Object();
langListener.change = function(eventObj) {
var target = eventObj.target;
var newLang = target.selectedItem.data;
MyLocale.setXMLLang(newLang);
MyLocale.start();
lang_cb.addEventListener("change", langListener);
// Force Japanese
lang_cb.selectedIndex = 1;
lang_cb.dispatchEvent({type:"change"});
Layer--language ex Fr:
// Forces combobox to have the correct value
on (release) {
var component = _parent.lang_cb;
for (var i=0; i< component.length; i++) {
var item = component.getItemAt(i);
if (item.data == "fr") {
component.setSelectedIndex(i);
component.dispatchEvent({type:"change"});
break;
ex Ja :
// Forces combobox to have the correct value
on (release) {
var component = _parent.lang_cb;
for (var i=0; i< component.length; i++) {
var item = component.getItemAt(i);
if (item.data == "ja") {
component.setSelectedIndex(i);
component.dispatchEvent({type:"change"});
break;
When I change the language in p1 , the language is also modified in p2, p3 and p4
however , after a navigation in p2, p3 and p4 , once I come back in p1 , the default language is back automatically although I did not touch the language bar!!
I don't know how to solve the problem
to my mind , the script reset itself each time I come back on p1
is there a way to keep the saved settings even when I am back on p1 until I modify manually again the language bar
thanks a lot

I am looking for a way to change simply the language of my flash animation
I work with flash cs4
of course I got Mylocale.as:
import mx.lang.Locale;
class MyLocale extends mx.lang.Locale {
static function start():Void {
var langCode:String = xmlLang;
currentXMLMapIndex = 0;
xmlDoc.load(xmlMap[langCode][0]);
static function setXMLLang(langCode:String):Void {
xmlLang = langCode;
and different xml files in the same folder than my swf file
in string , I ticked : "replace strings automatically during the execution"
with a default language (I am wondering if the problem is not from there)
if I tick: "replace strings manually using the scene language " or "replace strings via actionscript"
my code does not work.
then I kept: "replace strings automatically during the execution"
in my flash animation I have several scenes (pages)
p1, p2, p3, p4
in p1
I created a language bar
then 2 layers inside
Layer--action:
langListener = new Object();
langListener.change = function(eventObj) {
var target = eventObj.target;
var newLang = target.selectedItem.data;
MyLocale.setXMLLang(newLang);
MyLocale.start();
lang_cb.addEventListener("change", langListener);
// Force Japanese
lang_cb.selectedIndex = 1;
lang_cb.dispatchEvent({type:"change"});
Layer--language ex Fr:
// Forces combobox to have the correct value
on (release) {
var component = _parent.lang_cb;
for (var i=0; i< component.length; i++) {
var item = component.getItemAt(i);
if (item.data == "fr") {
component.setSelectedIndex(i);
component.dispatchEvent({type:"change"});
break;
ex Ja :
// Forces combobox to have the correct value
on (release) {
var component = _parent.lang_cb;
for (var i=0; i< component.length; i++) {
var item = component.getItemAt(i);
if (item.data == "ja") {
component.setSelectedIndex(i);
component.dispatchEvent({type:"change"});
break;
When I change the language in p1 , the language is also modified in p2, p3 and p4
however , after a navigation in p2, p3 and p4 , once I come back in p1 , the default language is back automatically although I did not touch the language bar!!
I don't know how to solve the problem
to my mind , the script reset itself each time I come back on p1
is there a way to keep the saved settings even when I am back on p1 until I modify manually again the language bar
thanks a lot

Changes made in RFC is not reflected in data services

Hi,
I am using a data service based on SAP R/3 RFC in my view
In my RFC i have some import parameters
and some export parameters
and when place a data service which is based on this RFC on the view for the first time , I am getting the import parameters and export parameters correctly
but the issue comes
when ever some one make changes in RFC and activating it again.
those changes are not reflected in data service (ex: a new import parameter is added or a parameter name is changed in the RFC, this is not reflected in data service)
i tried with deleting the existing data service and creating a new data service based on modified RFC
but even iam getting the data services details as pervious one ( as old data servie which i used at firt time)
why this is happening
how to solve this issue
regards
Srinivas

Hi,
Yes you need to restert the J2EE engine. Because when you imort it first time then it holdes it in cache memory. It will not be updated untill you restert the server. You restert the server then try it , you will get the right result for updated RFC.
Thanks
Chandan

HT2242 how to change itunes language on iphone

I've bought my Iphone from Germany and my ITunes and Appstore language is set to German. How can I change the language to English?

Hi,
kinda same problem. My iphone 5 device was bought in Greece. I live in Greece. Since an update ( I can't remember if it was the iOS 7' or the application's update) , my skype stopped "speaking" Greek and "speaks" only Spanish!!
I tried to change it back to Greek or even English from the language settings, but no can do. Not even English are acceptable.
I deleted the app and re-installed it . The first language for the application to operate after installing is Spanish. And that's all. It seems there is no way to change the language of my skype from Spanish to Greek or at least English on my iPhone 5 device (this problem was not solved since the latest updated of iOS 7 - i run the iOS 7.1.1 which I installed just yesterday)
ps. I can't check out if there is a latest version of skype from inside the skype cause I don't speak spanish and I don't know where to look , but I suppose after deleting and re-installing the app , the latest version of skype will automatically be installed.
Any help ?
Thanx for your time

E72 - Change Input Language Shortcut

Hi All,
Is there any shortcut to change input language through the keypad insted of getting into the differnt manue levels?
Regards,
wmomran.
Solved!
Go to Solution.

I had the same problem but found the solutaion by chance.
1. On the lowest row of keys push the second one on the left (arrow upward). It is "Shift" if I am not mistaken.
2. Immidiately after press nearest key to the right "Sym" (not simulteneously)
Window with languages should pop up.
Those who have had experience with E-71 know, that this function is available when you have opened a new sms or e-mail. But it does not work in an ordinary waiting mode.
Regards,
Alexander
Message Edited by Esugei on 22-Nov-2009 11:08 AM

Change LabVIEW language

Hello,
I need to change the language of my LabVIEW 2010 from French to English. How can I do that without loosing all the drivers and settings I set up using the French version?
Solved!
Go to Solution.

What is your end goal? If you're planning on making a LabVIEW application in different languages, you may want to take a look at S.E.A.'s Localization Toolkit.
Will
Certified LabVIEW Architect, Certified Professional Instructor
Choose Movement Consulting
choose-mc.com

To change business partner ( RFC enabled Function Module )in CRM.

Hi All;
While sending a Business partner from R/3 to CRM. I would like to change business partner ( RFC enabled Function Module )in CRM.
Is there any exit or a BAdI which i can use to do this?
Regards
Yusuf Dagyeli
Message was edited by: Yusuf Dagyeli
Message was edited by: Yusuf Dagyeli

Hi RAMS,
1. Under the SWCV Go to the Imported Objects.
2. Right click on the RFC and click on the Import of SAP object.
3. Give the logon server name, system number the user name and pasword.
4. Select the RFC u want to import.
5. Execute the import and the RFC is imported under the SWCV.
Now u can use this Imported RFC in the scenarios of that SWCV.
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

How to change the language in my printer hp officejet 4620?

How to change the language in my printer hp officejet 4620?

Hi,
You can change the settings in the Control Panel. Check from page #13 of the following document:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03251656/c03251656.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[solved]BAPI change of language (RFC)

Similar Messages

Maybe you are looking for