[SOLVED]bbswitch doesn't work with latest kernel(3.2.11.1)

[ebs@shankar ~]$ sudo rc.d restart bumblebeed
Password:
:: Stopping Bumblebee [DONE]
:: Starting Bumblebee [BUSY]
FATAL: Module bbswitch not found.
And due to that, my graphics card Nvidia is always draining power and heating up. How can I fix this?
UPDATE:
The only urgent fix for this is to downgrade to linux kernel 3.2.9.1.
But, I don't like this fix as I installed arch linux because I want to use the latest software.
Last edited by ebshankar (2012-03-19 05:44:02)

erdk wrote:Hmm, I've also have newest kernel with bumblebee, bbswitch and nvidia, but instead of normal versions I've installed dkms-* packages (dkms-bbswitch and dkms-nvidia) - so when new kernel arrives these modules are automatically rebuild to match new kernel. You should reinstall this two packages (bbswtich and nvidia) - they be build against new kernel and everything should be ok
Yes, the dkms versions work fine with the new kernel
Thanks!

Similar Messages

[Solved] Vmware doesn't work with kernel 2.6.36

Ive tried the fix from wiki and i get this error not sure what else to do
vsock-only/
vsock-only/shared/
vsock-only/shared/circList.h
vsock-only/shared/compat_init.h
vsock-only/shared/vmci_queue_pair.h
vsock-only/shared/compat_dcache.h
vsock-only/shared/vmci_infrastructure.h
vsock-only/shared/x86cpuid.h
vsock-only/shared/driver-config.h
vsock-only/shared/vmci_kernel_if.h
vsock-only/shared/compat_slab.h
vsock-only/shared/compat_interrupt.h
vsock-only/shared/compat_namei.h
vsock-only/shared/vmware_pack_end.h
vsock-only/shared/compat_spinlock.h
vsock-only/shared/compat_wait.h
vsock-only/shared/vm_atomic.h
vsock-only/shared/compat_semaphore.h
vsock-only/shared/vm_device_version.h
vsock-only/shared/compat_cred.h
vsock-only/shared/vm_basic_asm_x86.h
vsock-only/shared/vm_basic_math.h
vsock-only/shared/backdoor_types.h
vsock-only/shared/guest_msg_def.h
vsock-only/shared/compat_sock.h.orig
vsock-only/shared/compat_fs.h
vsock-only/shared/compat_page-flags.h
vsock-only/shared/vmware_pack_begin.h
vsock-only/shared/compat_pgtable.h
vsock-only/shared/community_source.h
vsock-only/shared/compat_scsi.h
vsock-only/shared/compat_kernel.h
vsock-only/shared/vmware_pack_init.h
vsock-only/shared/compat_page.h
vsock-only/shared/compat_sock.h.rej
vsock-only/shared/compat_sched.h
vsock-only/shared/compat_skbuff.h
vsock-only/shared/compat_mutex.h
vsock-only/shared/vmci_call_defs.h
vsock-only/shared/compat_string.h
vsock-only/shared/compat_pagemap.h
vsock-only/shared/vm_basic_types.h
vsock-only/shared/driverLog.c
vsock-only/shared/compat_timer.h
vsock-only/shared/vm_assert.h
vsock-only/shared/driverLog.h
vsock-only/shared/backdoor_def.h
vsock-only/shared/compat_ethtool.h
vsock-only/shared/vm_basic_defs.h
vsock-only/shared/vm_basic_asm.h
vsock-only/shared/compat_highmem.h
vsock-only/shared/compat_version.h
vsock-only/shared/compat_sock.h
vsock-only/shared/compat_list.h
vsock-only/shared/compat_mm.h
vsock-only/shared/compat_pci.h
vsock-only/shared/compat_autoconf.h
vsock-only/shared/vmci_iocontrols.h
vsock-only/shared/compat_file.h
vsock-only/shared/vmware.h
vsock-only/shared/compat_kthread.h
vsock-only/shared/includeCheck.h
vsock-only/shared/vm_basic_asm_x86_64.h
vsock-only/shared/compat_statfs.h
vsock-only/shared/compat_completion.h
vsock-only/shared/vmci_defs.h
vsock-only/shared/compat_netdevice.h
vsock-only/shared/compat_uaccess.h
vsock-only/shared/compat_pci_mapping.h
vsock-only/shared/compat_module.h
vsock-only/shared/autoconf/
vsock-only/shared/autoconf/sk_filter.c
vsock-only/shared/autoconf/setnice.c
vsock-only/shared/autoconf/cachecreate.c
vsock-only/shared/autoconf/netcreate_num_params.c
vsock-only/shared/autoconf/inode1.c
vsock-only/shared/autoconf/statfs1.c
vsock-only/shared/autoconf/maxbytes.c
vsock-only/shared/autoconf/skas1.c
vsock-only/shared/autoconf/filldir1.c
vsock-only/shared/autoconf/getsb1.c
vsock-only/shared/autoconf/skblin.c
vsock-only/shared/autoconf/cachector1.c
vsock-only/shared/autoconf/netif_num_params.c
vsock-only/shared/autoconf/cachector.c
vsock-only/shared/autoconf/geninclude.c
vsock-only/shared/autoconf/epoll.c
vsock-only/shared/dbllnklst.h
vsock-only/shared/compat_ioport.h
vsock-only/shared/compat_workqueue.h
vsock-only/Makefile.kernel
vsock-only/linux/
vsock-only/linux/af_vsock.c.orig
vsock-only/linux/util.h
vsock-only/linux/vsockCommon.h
vsock-only/linux/vmciHostKernelAPI.h
vsock-only/linux/notify.c
vsock-only/linux/af_vsock.c.rej
vsock-only/linux/vsockSocketWrapper.h
vsock-only/linux/util.c
vsock-only/linux/vsockVmci.h
vsock-only/linux/vmci_sockets_int.h
vsock-only/linux/af_vsock.h
vsock-only/linux/vsockAddr.h
vsock-only/linux/vsockAddr.c
vsock-only/linux/notify.h
vsock-only/linux/vsockPacket.h
vsock-only/linux/af_vsock.c
vsock-only/linux/stats.h
vsock-only/linux/vmciContext.h
vsock-only/linux/vsock_version.h
vsock-only/linux/stats.c
vsock-only/linux/vmciDatagram.h
vsock-only/linux/vmci_sockets.h
vsock-only/COPYING
vsock-only/README
vsock-only/Makefile.normal
vsock-only/Makefile
Stopping VMware services:
VMware USB Arbitrator done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmmon-only'
make -C /lib/modules/2.6.36-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-2.6.36-ARCH'
CC [M] /tmp/vmware-root/modules/vmmon-only/linux/driver.o
/tmp/vmware-root/modules/vmmon-only/linux/driver.c: In function 'init_module':
/tmp/vmware-root/modules/vmmon-only/linux/driver.c:425:15: error: 'struct file_operations' has no member named 'ioctl'
make[2]: *** [/tmp/vmware-root/modules/vmmon-only/linux/driver.o] Error 1
make[1]: *** [_module_/tmp/vmware-root/modules/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.36-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/tmp/vmware-root/modules/vmmon-only'
Unable to install vmmon
Last edited by xSubZer0x (2010-11-26 13:57:47)

thanks for posting this, I ran the referenced script yet for some reason still continue to have one issue with the 'Virtual ethernet' module ... I did update the Vmware:Talk page, but not the front page yet, as I still havingtrouble with Virtual ethernet. anyone else running into a similar issue and have a potential fix for kernel 2.6.36?
Starting VMware services:
VMware USB Arbitrator done
Virtual machine monitor done
Virtual machine communication interface done
VM communication interface socket family done
Blocking file system done
Virtual ethernet failed
Last edited by fnord0 (2010-11-28 00:25:23)

Ipod touch doesn't work with latest itunes install

Ok, I've been around the block too many times. Somebody, pleez help! I have a 3rd generation ipod touch. Couldn't connect to itunes (previous install for our nano and classic). Uninstalled it. Downloaded fresh, latest, 64bit installation. Tons of problems with Apple Application Support. Uninstalled, reinstalled, uninstalled EVERYTHING (Quicktime, Bonjour, updater, etc.) Used Windows uninstaller and registry cleaner. Reinstalled - iTunes works. Great. Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?

Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
In iTunes, with the Touch connected, go "Help > Run diagnostics." Uncheck "Network Connectivity tests" and "DVD/CD tests" but leave the other boxes checked. Click "next" and then "next" again. Paste the contents of your diagnostics into a reply here so we can have a look.

Accessory: Belkin Keyboard doesn't work with latest iOS update

Hello,
does anybody know how to synchronize my Belkin bluetooth keyboard with the iPad? Usually what I have to do is only to connect the magnet on the accessory and turn on my iPad's Bluetooth and it synchronizes itself. So when I type something on the keyboard, iPad does realize that I am using an external keyboard hence, I am using the keyboard.
now, when I connect the magnet on the keyboard, and i type in something, iPad does not recognize this. does anybody have the same problem or know how to fix this?
Message was edited by: Zhinbei. The problem is solved. I had to re-pair the keyboard with the iPad by press and hold Fn + Pair buttons for 2 seconds until it appears.

Try repairing permissions with Applications -> Utilities -> Disk Utility.
There select First Aid. After that select the hard drive within Disk Utility's window. Finally click on the button that says Repair Permissions. A reboot may be necessary to finish the work when it is done.
Ignore any errors reported.

HTTPService.headers doesn't work with latest Player

Or maybe I'm messing something up, but I can't get any headers I set to transmit in a web app, but the same code works fine in an Air app.
These bugs suggests that it hasn't worked for the last 3 years:
https://bugs.adobe.com/jira/browse/SDK-11401
https://bugs.adobe.com/jira/browse/FP-209
(I confirmed the presence [or absence] of headers using both Fiddler, and FlashBuilder 4's 'Network Monitor').
I've also seen several unanswered posts in the forum here asking similar questions, but no answers.
In FP-209, there is a comment:
>>
I ran into this issue today. Spoke with various people in my Flex community and no one could understand why this was an issue. Some people pointed to the security issue note referenced here http://kb2.adobe.com/cps/403/kb403030.html, but the "Authorization" header was allowed again after 9.0.124.
>>
Can someone in the know confirm that these bugs are supposedly avoidable with later Flash Player versions, because it's still failing for me in latest player version.
If you're struggling with same issue, please do vote for this bug to get fixed:
https://bugs.adobe.com/jira/browse/FP-209
Thanks!

I also encounter this problem,maybe this is good idea to work around
Gregory Golberg added a comment - 05/07/10 11:36 PM
Seven: like you, I can reproduce this in FB 4 and player version 10. It appears that the *only* "workaround" is to use http://code.google.com/p/as3httpclient/ (or a similar solution, basically, opening a Socket directly and talking HTTP to it yourself). That's what I am doing currently.

CD Eject Doesn't work with latest upgarde to OS 10.4.9

Is anyone else having this problem?
I have two hard drives on my Mac, and for the longest time was not able to eject a CD using the eject button on the keyboard, or from the menu.
Today I booted from the OS on the other hard drive (10.3.7, I think) and it worked fine. I ugraded that system to 10.4.9, and now the eject key isn't working.
Is this a bug in the latest upgrade? If so, any solutions?
Thanks!
[email protected]

You could always use the Eject menu. To activate it open…
/System/Library/CoreServices/Menu Extras/Eject.menu
… just the once and you'll find it in the menubar.

LastPass password manager doesn't work with latest Firefox after downloading add-in, installing it and re-starting Firefox.

I'm using FireFox 20.0. I downloaded the add-in, installed it and re-started FireFox but LastPass doesn't show up in the add-ins nor does it fill in the login info on sites that I have in my LastPass vault.

What I've done is make LastPass my home site so when I launch FireFox, I log into LastPass and leave the LastPass vault page in an open tab. Then when I log into another site which requires a login and password which I've previously set up in LastPass, LastPass logs me into that site automatically. LastPass is a free password manager that works well in IE. Any time LastPass detects a login page, it enables you to set up the password and ID in its database and fills in the login info at future login prompts. My solution for FireFox is a bit clunky but when I need to use a second browser, it works.

Apple TV Gen 2 - "sleep shortcut" doesn't work with latest software update.

I used to be able to hold down the "select" button when on the Apple TV home menu, and the box would go to sleep. However, after the last software update, this no longer works. The only way to put the box to sleep is to head through the settings menu. This is annoying and time consuming. Any ideas why the shortcut was disabled? Is there something new? Any plans to fix the "bug"?

YUP..!! Just updated the device and it works fine again... Thank you for your swift reply.. Enjoy your Sunday...
//Jesper

My WORD for Mac doesn't work with latest upgrade. Any Remedy?

Most recent update to OS caused WORD for MAC not to work. Any Remedy?

If you just updated to Mountain Lion (10.8) and you were using Office 2004, your best option is to find a newer Office replacement. Here are a few:
Office 2008 or newer ($140 and up for the 2011 version; you may find 2008 used elsewhere)
Apple Pages ($15)
LibreOffice (free)
Matt

[SOLVED] M500 doesn't work with Asus Q501LA

Bought this SSD over a year ago and have been happy with it up until this point. When I bought it I decided to do a clean install of Windows 7 because I am not a fan of 8. Fast forward to now and I get my notification for my free Windows 10 upgrade, an update I actually want. Low and behold, install fails. Multiple times. Come to find out that neither the Windows 10 or Windows 8 installer can see this drive. I've looked all over the internet but every one that has this problem has not found a fix. Crucial has not addressed it either. Very disappointed with Crucial now. Unless they can help remedy this problem then it will be a cold day in **bleep** before I buy anything else branded Crucial.

targetbsp wrote:
summit48 wrote:
Windows10 has hijacked the back end believing every Laptop and Desktop PC is a Smartphone. What do you mean by that?Windows 10: Microsoft under attack over privacyhttp://www.theguardian.com/technology/2015/jul/31/windows-10-microsoft-faces-criticism-over-privacy-default-settings In the "one size fits all" philosophy of Microsoft there is no distinction between a smartphone and a PC. You might turn some of these privacy setting on for a smartphone but not on a PC.

My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?

My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?

Please explain.
What does "cellcom line doesn't work with my iPhone" mean?
What are you trying? What is happening?
Where did you buy the iphone?
Any info abnout your issue at all?

[SOLVED] openbox menu command doesn't work with &&

I'm now using openbox-session only.
I'd like to run a program after something was done correctly:
zenity --question && killall openbox
I used "obmenu" and it seems that it fixes & to & correctly in the menu.xml.
However, the previous command "zenity" is run only.
In terminal, there's no problem, but it doesn't work with "command" in openbox menu.
<item label="Exit">
<action name="Execute">
<execute>
zenity --question --title="Exit" --text="Are you sure to go back to console?" && killall openbox
</execute>
</action>
</item>
Please, give me any idea. Thank you.
Last edited by mairoo (2009-09-09 10:06:17)

hbekel wrote:
You'll need to use a shell explicitly:
<execute>
sh -c 'command1 && command2'
</execute>
I flagged "solved" thanks to your help. It works good. Thank you.

Latest Quicktime update doesn't work with older versions of Safari.

I have an iMac with Panther 10.3.9. I've downloaded and installed all the updates regularly. That last update of Quicktime doesn't work with Safari! All I get is the big Q. Any ideas?

Hi
Welcome to Apple Discussions
Check your Quicktime settings in System Preferences>Quicktime>Advanced panel.
Mime settings>make sure nothing is checked in the Miscellaneous box.
Advance panel>Enable Flash ought to be selected.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

[SOLVED]bbswitch doesn't work with latest kernel(3.2.11.1)

Similar Messages

Maybe you are looking for