[solved] Beryl messes up my screen - I don't know why!

I tried to configure beryl on my new Thinkpad X60 (which has an Intel GMA950). I use the very same settings that worked on my old notebook, too (it had an i810 graphics device, so I use the same driver), AIGLX, to be more precise.
I can start Beryl with 'beryl-manager', that's no problem and it almost works as it's supposed to be. But if I move windows, occasionally their content get's messed up and is unreadable. If I use the manager to switch back to metacity everything looks neat again.
Any ideas where I might have failed in configuring correctly?
Last edited by saciel (2007-07-23 11:42:57)

Ok, it's solved... The problem was I didn't get it working at all on first tries. So I copied all the settings from my old laptop, which made it working but caused the mess. Now, in "Advanced Beryl Settings" I switched everything back to "Automatic" and it works out better... but: I still got that mess beneath the active window. Switching of "blur" in 'Beryl Settings Manager' did the job, there. So everything is neat again!

Similar Messages

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please help. I have tried lots of things now and cannot solve it.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
Thanks
Talat Khatri

Try the following steps,
Sign into your computer and removal of credit card information. Here are the steps:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
Reset your account password from the following link:
http://iforgot.apple.com
Phase 3:
Download a free content on to get recognized in iTunes.
To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
After you are able to download the free App try updating the billing information as usual.

HT201401 my home button is not working don't know why.my mobile phone is in warranty so please repair it or give me another phone so i can use it.please solve my problem i am in tension because of this problem

my home button is not working don't know why.my mobile phone is in warranty so please repair it or give me another phone so i can use it.please solve my problem i am in tension because of this problem

either you can call apple care
or
alternatively take it back to the reseller and have them give you new phone . unless obviously the button broke down due to mishandling

I don't know why my phone on lock screen then there is a unknown flying icon over there... What should I do? I can't access to my call and unlock my iPhone...

I don't know why my phone on lock screen then there is a unknown flying icon over there... What should I do? I can't access to my call and unlock my iPhone...

Flying Icon? Like a plane?
If so, the phone is in Airplane mode
Swipe up to get the control panel, tap the airplane
See photo for reference
http://cdn1.appleinsider.com/78348734-2.png

Screen just froze up in middle of netflix show...has the image on screen. Don't know how to get rid of it,start over.

screen just froze up in middle of netflix show...has the image on screen. Don't know how to get rid of it,start over.

I was able to reboot...thank goodness..because this morning the screen was still frozen on the Netflix movie...full screen and no options to do anything. So the first option was not going to work for me.
By the time I got to work the dead battery was showing...even though it had been plugged in all night...
So then I looked at the Apple website to make sure I knew which was the Sleep key...and then did the reset and it worked. It's at 2% right now and I assume it's charging....I cleared out the Safari cache and closed it up.
Option 2, the reboot with Sleep and Home buttons worked...once I held them long enough!
Many, many thanks.
Carole

My iPhone 4S has been frozen in the loading screen I don't know how to fix it:( my lock screen button doesn't work

My iPhone 4S has been frozen in the loading screen I don't know how to fix it:( my lock screen button doesn't work

Without a working lock screen button, you'll probably have to wait for the battery to go dead. Once it doesn't wake up by pressing the home button you can plug it into a charger and it will eventually reboot.

How I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

how I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

You have to take the computer to the Apple store.
http://support.apple.com/kb/HT4790
Best.

Windows 8.1 Keeps crashing! Blue screens and I don't know why.

My computer is crashing randomly. Happens once every few days or so. It started happening when I installed a new fan and heatsink. My cpu never goes over 50 C now so I don't know why it is crashing. Here is the dump file. Please help me :/
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
Machine Name:
Kernel base = 0xfffff803`7a47e000 PsLoadedModuleList = 0xfffff803`7a754370
Debug session time: Tue Nov 25 22:05:18.738 2014 (UTC - 5:00)
System Uptime: 2 days 9:06:56.454
Loading Kernel Symbols
Loading User Symbols
PEB is paged out (Peb.Ldr = 00000000`7ffdf018). Type ".hh dbgerr001" for details
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff8037a52cba4, ffffd000220ab340, 0}
Probably caused by : win32k.sys ( win32k!SEMOBJ::vUnlock+2c )
Followup: MachineOwner
4: kd> !analyze -v
*                        Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8037a52cba4, Address of the instruction which caused the bugcheck
Arg3: ffffd000220ab340, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KxWaitForLockOwnerShipWithIrql+14
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx
CONTEXT: ffffd000220ab340 -- (.cxr 0xffffd000220ab340;r)
rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
r8=ffffd000220abef0 r9=ffffe000da69ddb0 r10=ffffd000220abf80
r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
r14=0000000000000000 r15=ffffe000d889d880
iopl=0         nv up di pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010046
nt!KxWaitForLockOwnerShipWithIrql+0x14:
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
Last set context:
rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
r8=ffffd000220abef0 r9=ffffe000da69ddb0 r10=ffffd000220abf80
r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
r14=0000000000000000 r15=ffffe000d889d880
iopl=0         nv up di pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010046
nt!KxWaitForLockOwnerShipWithIrql+0x14:
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: AI Suite II.ex
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff8037a4d9f8c to fffff8037a52cba4
STACK_TEXT:
ffffd000`220abd70 fffff803`7a4d9f8c : ffffe000`da69ddb0 00000000`0000001e 00000000`00000000 ffffe000`db793c30 : nt!KxWaitForLockOwnerShipWithIrql+0x14
ffffd000`220abda0 fffff803`7a4d93c2 : 00000000`00000000 fffff960`002172ec ffffd000`220ac002 fffff901`44ffe620 : nt!ExpReleaseResourceForThreadLite+0x64c
ffffd000`220abee0 fffff960`001da2cc : 00000000`00000000 fffff960`001a7ef2 0000207f`e204207f 00000000`00000001 : nt!ExReleaseResourceAndLeaveCriticalRegion+0x12
ffffd000`220abf10 fffff960`001d51a3 : fffff901`451e4ac0 ffffd000`220abfa0 00000000`00000000 fffff901`40ad53f8 : win32k!SEMOBJ::vUnlock+0x2c
ffffd000`220abf50 fffff960`001e49ad : 00000000`0000163c fffff901`44ffe620 00000000`00000000 ffffe000`da69ddb0 : win32k!GreSelectVisRgnInternal+0x173
ffffd000`220abfd0 fffff960`001ac21b : ffffffff`e204207f fffff901`00000d3a 00000000`00000001 ffffe000`da69ddb0 : win32k!ResetOrg+0x50d
ffffd000`220ac100 fffff960`001e5a5d : ffffffff`e204207f fffff901`452e23e0 ffffd000`220acb00 ffff6b78`f79a9a37 : win32k!UserSetDCVisRgn+0x17b
ffffd000`220ac140 fffff960`001ed3a4 : fffff901`40a58990 00000000`00000000 fffff901`40a58990 00000000`02000705 : win32k!zzzLockDisplayAreaAndInvalidateDCCache+0x14d
ffffd000`220ac1a0 fffff960`003149cf : ffffe000`db7b2ba0 fffff901`428f7a80 00000000`00000000 fffff901`40b00ff0 : win32k!xxxCreateWindowEx+0x1824
ffffd000`220ac4b0 fffff960`001ed82a : fffff901`428f7d28 00000000`00000000 00000000`00000000 ffffe000`db7b2ba0 : win32k!xxxCreateDefaultImeWindow+0x19b
ffffd000`220ac5b0 fffff960`001d6ab5 : 00000000`00000000 00000000`00000000 e000d889`78747355 fffff803`7a4d7bc8 : win32k!xxxCreateWindowEx+0x1caa
ffffd000`220ac8c0 fffff803`7a5d89b3 : 00000000`00000000 ffffd000`220ac940 ffffd000`220ac958 ffffd000`220ac968 : win32k!NtUserCreateWindowEx+0x4d2
ffffd000`220aca10 00000000`777f611a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0abbe758 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x777f611a
FOLLOWUP_IP:
win32k!SEMOBJ::vUnlock+2c
fffff960`001da2cc ff158e023100    call    qword ptr [win32k!_imp_PsLeavePriorityRegion (fffff960`004ea560)]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: win32k!SEMOBJ::vUnlock+2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 54335e2a
IMAGE_VERSION: 6.3.9600.17393
STACK_COMMAND: .cxr 0xffffd000220ab340 ; kb
BUCKET_ID_FUNC_OFFSET: 2c
FAILURE_BUCKET_ID: 0x3B_win32k!SEMOBJ::vUnlock
BUCKET_ID: 0x3B_win32k!SEMOBJ::vUnlock
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_win32k!semobj::vunlock
FAILURE_ID_HASH: {ec837e9a-fa14-dd77-d99c-f14b9fe89bf2}
Followup: MachineOwner

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
to allow the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
system log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

HT4044 My Ipad2 screen has a greenish hue. Almost looks like Sepia. Don't know why or how to fix it. help!

How can I fix my Ipad2 from looking greenish/sepia? Don't know why this happened all of a sudden and want to know how to fix it. does anyone know?

As a first step, try doing a Reset PRAM.
http://support.apple.com/kb/ht1379
The sound settings are stored in PRAM. If there is some corruption of settings in PRAM, a reset may fix your problem.

I don't know why whenever i choose " check for updates " and download itunes 11.1 , it never shows any downloads , and i need itunes 11.1 so i can restore my iphone again .. help please

I don't know why whenever i choose " check for updates " and download itunes 11.1 on my desktop , it never shows any downloads .. even when i tried downloading it from the website, and i need itunes 11.1 so i can restore my iphone again .. help please

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

In my Macbook Pro finder folder under All Images, there are duplicate files, but one is small and the other is full size. I wanted to clean up the files, but don't know why I have two of everything. Any Ideas?

In my Macbook Pro, the Finder folder has duplicate images in the 'all images' file. One image is small and the other is full size. First question is why do I have two of every image? Why is one small and the other large. Do I need two of everything? If not, which do I delete?
thanks, Jean

Hello fane,
Re: duplicate images in finder.
Nearly all images are JPG with a few GIF and PNG sprinkled in.
I opened the inspector so I do get info when opening each image, but it a slow process.
It seems that one image is around 70k while its twin can be up to 4Mb which is what comes unedited from my camera. Sometimes there will be 3 or 4 identical images in finder, but when I open iPhoto to see what ‘s really in the file, I find only one image, and it’s full sized.
Are all these extra images, even if they are aliases, taking up space on my drive? And should I delete them? The info bar says I have over 10,000 images, which is rather a lot for what I do.
I am unable to add the file size on the view menu as it is grayed out. Don’t know why it’s gray, but having that info on the screen would save a lot of time and fiddling with each image.
I am trying to resize selected pix so I can upload them to e-bay, which requires less than 70k. I have looked at resizing programs but most are for PC platform and not Mac, so I am trying to resize in the finder window under tools. Tedious at best. Any suggestions will be appreciated
Thanks for your help,
jeanfromwilsonville

I can not hear any voice from the ear piece with my new Iphone 5. I don't know why.

I just used the new iphone 5 for one week. Now, I found I can not hear anything from the ear piece. The speaker is ok, but it dose not work on the earpiece.
I use it very carefully, I even use a good case for it.
I don't know why!!!!!

Did you remove the plastic protector that came on the front of the device?
Is there a screen protector or case blocking the speaker on the device?

I updated to Maverick and now folders keep crashing? don't know why

My folders continues to go gray since upgrading to maverick 10.9.1. Don't know why. Can someone help me with this?

How does info on a gray screen at startup help with folders going gray?

I don't know why it takes too long time to sample flat file.

I don't know why it takes too long time to sample flat file.
OWB Client 10.1
While importing a flat file of fixed width ,
in the screen "Flat File Sample Wizard" shows the text box number of rows with default value 200.
I want to extend this value to 700,000.
But, it takes too long time (over 5 hours) to sample it.
Do you know why it is happend? or How can i fix this problem?
Thanks in Advance.
Regards,
JWS.

Hello,
Actually flat file sampling process goal is to capture the structure of the file. Thats why initially the sample size is set to 200 lines.
The question is why you are trying to perform sampling by 700000 rows? Are you expecting some change in structure beyond this mark?
If so, and you want to capture the fact that your source file is multi typed, your better prepare small file for sampling outside the OWB.
Sergey

[solved] Beryl messes up my screen - I don't know why!

Similar Messages

Maybe you are looking for