[SOLVED] Black screen after kernel boot after pacman -Syu

Hi, after full system upgrade with pacman -Syu, I get after the kernel boot black screen and everything is freezing. Then need to manually shut down the power button!
Normally when my system starts up after the kernel boot I get straight to the command line terminal login.
Can anybody help me how to fix this? Any clues? Any advice is welcome!
The problem is solved by downgrading to kernel 3.6.11.-1
Many thanks for the help from the people on #archlinux !
Last edited by OpenEye (2013-01-29 05:14:04)

jasonwryan wrote:
Please stop bumping your thread: use the edit button
https://wiki.archlinux.org/index.php/Fo … te#Bumping
What have you done about the errors being printed to your logs? You could start by fixing the network error and the broken udev rule...
Are you still using intiscripts? They are no longer supported: https://www.archlinux.org/news/end-of-i … s-support/
# edit: not a pacman issue, moving to Newbie Corner
I have searched for many hours and days for solutions on the internet and forums, tried some things, but with no results! I don't know how to fix the errors! Do you know how to fix that? I'm a total n00b! I'm doing my best as I can! Need help, thanks!

Similar Messages

  • Black screen+can't boot after installing Windows

    Hello
    I just reinstalled MacOSX on my MBA, then installed Windows XP Pro via Boot Camp, though I've not seen XP boot yet. When Mac restarted I chose to boot to Windows in Boot Camp. Now I just get a black screen and 'Disk error. Press any key to restart'. No keys respond and I have to press the power button for 10sec to get anywhere. but I seem to be stuck with the black screen.
    any ideas!
    thanks

    This has happened to me on my MBP.
    Did you select to format the disk under Windows setup? You have to select this, not just assume the partition is formatted. When I chose the option to format into FAT32, the rest of the install went fine and instead of the black screen, it booted right into XP.
    Hope this might help.

  • [SOLVED] Black screen halfway through boot before login screen appears

    I originally installed my Arch Linux 64 system on a quad core intel cpu with 4GB RAM and a Nvidia 9600 GT graphics card. Arch is installed on 2 500 GB HDD running on software RAID and LVM. A few months ago I decided I wanted to upgrade my machine to an i7-2600K with 8 GB RAM and a Nvidia 580 GTX graphics card. Since I was using pure software RAID I knew that I could just reuse my installation. So I popped in the drives into the new machine and glory glory Arch booted just fine. One thing I notied though and this has been bothered me since then. On my old machine I could see the whole boot process from start to finish. On my new machine I only see the first few seconds and then a black screen for few seconds and then I get the login screen (KDM in my case). Now I'm running a pure systemd system and I can see the boot process until
    [ok]     started loading random ...
    and then the black screen sets in. Why does this happen? Why can't see if udev, samba etc. start correctly anymore?
    Last edited by fettouhi (2012-10-11 21:46:56)

    DSpider wrote:Then remove Nouveau completely, undo any changes to mkinitcpio.conf, and re-generate your initramfs.
    I don't have the nouveau driver installed at all. But I finally got rid of the black screen. I simply added nomodeset to the kernel parameters in grub and now everything ass before.

  • New ram installed and have black screen then it shutsdown after 45 seconds

    ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help. the slot i am trying to use hasn't ever been used.

    Hi
    Sorry meant to add , have you tried re-setting your BIOS to Default just to make sure 100% that your BIOS setting is not causing an issue .
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • My macbook wont come on.  black screen saying insert boot disc please help

    Just tried to turn on my mac book. came up with a black screen and insert boot disc. never done this before. cant find my serial number on the mac book so cant find the support i need. please help

    Mandalizabeth39 wrote:
    thank you that worked great
    You never answered my question, and if you have not changed anything then this will happen again
    What choices were presented by the boot manager

  • [SOLVED] Black screen after boot

    Hello,
    I've been running Arch for a while now successfully, and decided to give Windows 10 a go, so I installed it on the side. Naturally, Windows overwrote the Grub2 bootloader, but I knew that was going to happen.
    So after playing with Windows 10 for a while, I decided to go back to Arch. I put in the Arch Live CD, chrooted into my Arch installation, and ran the grub-install commands
    # grub-install --target=i386-pc --recheck=/dev/sdc
    # grub-mkconfig -o /boot/grub/grub.cfg
    Grub reported no errors, other than something "invading" block 32. But nevertheless reported "success".
    I reboot, and sure enough Grub is there, but when I try to load Arch, the first time I got a message that it was re-checking the /dev/sdc3 (which is where Arch is installed, /dev/sdc2 is where Windows is) because it's mount time is "in the future". That check ran for about 10 seconds, then proceeded with "normal" boot. The problem is... I see the message "/dev/sdc3 is clean" after which the SDDM (former KDM, the display manager) should load.
    But all I see is black screen (not screen turned off, just black). I tried going to tty's (Alt+F1 to F5), but couldn't. I erased the Xorg.0.log (through another chroot) and rebooted with the same problem, then accessed the log later only to find them empty. I tried disabling SDDM and enabling GDM which I had installed, same problem.
    What could it be? I don't even know where to look, as I don't really see any error messages anywhere.
    Thanks!
    Last edited by Deusdies (2014-11-08 04:54:46)

    Once again duck programming, err, problem solving to the rescue.
    I chrooted again and removed the nvidia drivers and disabled sddm. Installed xf86-video-noevau drivers and rebooted. This time I was greeted with tty1. Success!
    Did some more fiddling, but I think it was the SDDM that was the culprit. I uninstalled it, and installed LightDM (with kde-greeter). Enabled the lightdm using systemctl, also removed the noevau with nvidia (back to proprietary), rebooted, and voila, it works! I am greeted with the login screen.

  • [SOLVED]black screen after installing nvidia driver from official repo

    Hi!
    I have just made a clean install this afternoon and I really can not get the drivers from nvidia in the official rep to work. After booting it just gives me blackscreen.
    What I have tried:
    1. Blacklisted nouveau.
    2. Doublechecked mkinitcpio.conf for nouveao under "MODULES" section.
    3. Rebuilt initramfs by doing
    mkinitcpio -p linux
    4. i tried with a "nomodeset" by entering it in grub.
    5. Last I tried to remove nouveau by doing
    pacman -Ss nouevau
    pacman -R mesa
    pacman -Rc mesa (here I double checked the packages and nothing really vital for a full boot of a non-graphical interface (TTY1) is gone)
    After Pressing enter from grub I can not see anythin,  except from some text that flashes by, Something about checking /dev/sda6 for any errors... Except from that, nothing. Just a black screen.
    I am writing this from my phone right now, please understand if I am doing any spelling errors    (too lazy to chroot ehen in my bed and PC turned off for the night )
    Last edited by f4rm0r (2015-03-06 22:30:15)

    jasonwryan wrote:
    So you have one of those dual GPU machines? Then you need to read the Bumblebee or Optimus pages on the wiki.
    And mentioning that in your intial post would have helped: See How To Ask Questions The Smart Way.
    I never really tried the intel gpu, nor did I knew that my mb had that compability to actually run with that, since I can not even change to only use the display connection from my cpu :0
    Besides, I never really will use the built-in gpu on my proc unless my graphics card crashes, and if that happens, I can just create a chroot and read-on about bumblebee and such
    I am right now writing this from my Desktop
    I have some minor issues with my KDE environment, the text being so small I can barely read it inside of applications.... except from that I have used "Settings" to change it inside the KDE environment :b
    So I can live with it, unless it happens inside games aswell
    Anyway, I just did not knew about it, otherwise I would have read 'bout it and tried to fix it before i came here
    I know how it is when ya dont get enough info about a problem like "This program won't work, why?" (I am the PC wizard amongst my friends, so I know ya should try everything, use google, and most of all, do not panic, it can and will be fixed :3
    But ty anyway for the suggestion Jason, appreciate it!
    will mark this thread as solved now

  • [solved] Black screen after upgrade

    Hi, I upgraded arch on my old laptop about a week ago and after reboot all I got was a black screen. The problem is ctrl+alt+backspace doesn't do anything, nor does ctrl+alt+f*. So I tried to boot using "arch fallback" and my own arch runlevel 3 grub entry, but got the same problem - I can see the text running during boot, but at some point I get a black screen. I already downloaded puppy linux, but I have no idea where to look. I looked in x.org.log and found a warning about fbdev not found, but I thought I don't need that anyway because afaik xorg was using the intel module, I'm not sure however, because I used hardware auto detection. Without being able to boot I have no idea if there is any way to install it. Thanks in advance for your help.
    Last edited by Vozka (2010-01-26 17:48:53)

    I'm guessing you have an Intel graphic card. You can try the following to deactivate KMS which is now default for Intel graphics cards:
    You can add "i915.modeset=0" to your kernel options in your grub config. This may, however, result in a hard crash on starting X. Maybe this helps, but this is only a workaround. KMS will be the only way in the future (upstream choice).
    EDIT:
    News item is here: http://www.archlinux.org/news/477/
    As I have seen from your pacman.log you have upgrade the kernel to .32, so I think my advice should help.
    Last edited by ise (2010-01-26 14:31:24)

  • [SOLVED] Black screen after GRUB

    Hello everyone
    I was setting up a machine with E17 and was trying various DM's since none seemed to work. After attempting to use LightDM, I get a black screen after GRUB. I was trying to read the various logs at /var/log/ but I cannot understand them properly. I tried reinstalling entrance and LightDM with no luck. I even tried editing grub's entry appending '1' or 's' and still no dice. Any help would be appreciated.
    Last edited by Linoman (2014-01-20 09:22:33)

    Hi tnx for both answers.
    I missed something important in Xorg.log. As you can see, fbdev and modesetting aren't loading as usual. I didn't check grub stuff, I don't think it's related, since loading in level 3 (text mode) I get a black screen but I can login as root and turn off the computer blindlessly.
    [ 2.969] (II) LoadModule: "modesetting"
    [ 2.969] (WW) Warning, couldn't open module modesetting
    [ 2.969] (II) UnloadModule: "modesetting"
    [ 2.969] (II) Unloading modesetting
    [ 2.970] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2.970] (II) LoadModule: "fbdev"
    [ 2.970] (WW) Warning, couldn't open module fbdev
    [ 2.970] (II) UnloadModule: "fbdev"
    [ 2.970] (II) Unloading fbdev
    [ 2.970] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2.970] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
    [ 2.970] (II) VESA: driver for VESA chipsets: vesa
    [ 2.970] (++) using VT number 7
    [ 2.974] (WW) Falling back to old probe method for vesa
    javex wrote:Post the content of the following files:
    Also does disabling LightDM again help resolve the issue, i.e. can you get it to work without LightDM?
    No, I can't get it to work changing DM's. I'm not sure if I pacman -Syu before changing DM's another time. Maybe it wasn't LightDM's fault afterall.
    Spider.007 wrote:Additionally; try booting without the 'quiet' entry that is in the kernel line by default; and disable https://wiki.archlinux.org/index.php/Ke … de_Setting too
    Thanks for pointing out that. I didn't knew I had it on.
    Last edited by Linoman (2014-01-11 21:34:08)

  • [SOLVED] Black screen after kdm upgrade

    Hi,
    I just did a pacman -Syu and at the next reboot when xdm was supposed to appear the only thing I got was a black screen. It's pitch-black as if turned off, not as if the background was black (laptop lcd)
    If I just enter my password blindly, it enters KDE and launches all the normal processes so it appears to be just a the screen being black.
    This is what I upgraded:
    [2014-09-29 00:13] [PACMAN] Running 'pacman -Syu'
    [2014-09-29 00:13] [PACMAN] synchronizing package lists
    [2014-09-29 00:13] [PACMAN] starting full system upgrade
    [2014-09-29 00:15] [PACMAN] upgraded ansible (1.7.1-3 -> 1.7.2-1)
    [2014-09-29 00:15] [PACMAN] upgraded grantlee-qt4 (0.5.0-2 -> 0.5.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded qtwebkit (2.3.3-2 -> 2.3.4-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdelibs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdepimlibs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libbaloo4 (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded baloo4-akonadi (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded baloo4 (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded baloo4-widgets (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded bash (4.3.024-2 -> 4.3.026-1)
    [2014-09-29 00:15] [PACMAN] upgraded curl (7.38.0-1 -> 7.38.0-2)
    [2014-09-29 00:15] [PACMAN] upgraded e2fsprogs (1.42.11-1 -> 1.42.12-1)
    [2014-09-29 00:15] [PACMAN] upgraded flac (1.3.0-3 -> 1.3.0-4)
    [2014-09-29 00:15] [PACMAN] upgraded ghostscript (9.14-1 -> 9.15-1)
    [2014-09-29 00:15] [PACMAN] upgraded p11-kit (0.20.2-1 -> 0.20.7-3)
    [2014-09-29 00:15] [PACMAN] upgraded gnutls (3.3.8-1 -> 3.3.8-2)
    [2014-09-29 00:15] [PACMAN] upgraded groff (1.22.2-6 -> 1.22.2-7)
    [2014-09-29 00:15] [PACMAN] upgraded kde-base-artwork (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kde-wallpapers (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded oxygen-icons (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-runtime (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-lib (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-dolphin (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-katepart (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kdepasswd (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kdialog (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-keditbookmarks (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kfind (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-konqueror (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-konq-plugins (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-konsole (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-kwrite (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-plasma (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdepim-runtime (4.14.0-3 -> 4.14.1-1)
    [2014-09-29 00:15] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2014-09-29 00:15] [PACMAN] upgraded kdebase-workspace (4.11.11-2 -> 4.11.12-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeedu-marble (4.14.0-1 -> 4.14.1-2)
    [2014-09-29 00:15] [PACMAN] upgraded libkipi (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkdcraw (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-gwenview (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kamera (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kcolorchooser (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kgamma (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kolourpaint (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-kruler (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-ksnapshot (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-mobipocket (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkexiv2 (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded poppler (0.26.4-1 -> 0.26.5-1)
    [2014-09-29 00:15] [PACMAN] upgraded poppler-qt4 (0.26.4-1 -> 0.26.5-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdegraphics-okular (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkcddb (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libkcompactdisc (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-audiocd-kio (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-dragonplayer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-juk (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-kmix (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-kscd (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdemultimedia-mplayerthumbs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdenetwork-kopete (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-bball (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-binary-clock (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-blackboard (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-bookmarks (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-bubblemon (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-calculator (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-charselect (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-libs (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-comic (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-community (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-dict (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-eyes (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-fifteenpuzzle (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-filewatcher (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-frame (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-fuzzy-clock (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-icontasks (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-incomingmsg (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-kimpanel (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-knowledgebase (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-kolourpicker (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-konqprofiles (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-konsoleprofiles (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-lancelot (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-leavenote (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-life (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-luna (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-magnifique (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-mediaplayer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-microblog (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-news (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-notes (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-nowplaying (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-paste (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-pastebin (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-plasmaboard (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-previewer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-qalculate (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-rememberthemilk (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-rssnow (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-showdashboard (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-showdesktop (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-social-news (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-spellcheck (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-systemloadviewer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-timer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-unitconverter (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-weather (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-weatherstation (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-applets-webslice (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-containments (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-audioplayercontrol (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-browserhistory (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-characters (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-contacts (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-converter (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-datetime (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-dictionary (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-events (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdesdk-kate (4.14.0-2 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-katesessions (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-konquerorsessions (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-konsolesessions (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-kopete (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-mediawiki (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-spellchecker (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-translator (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-runners-youtube (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-mandelbrot (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-marble (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-pattern (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-potd (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-qmlwallpapers (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-virus (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeplasma-addons-wallpapers-weather (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-ark (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-filelight (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kcalc (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kcharselect (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kdf (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kfloppy (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kgpg (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kremotecontrol (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-ktimer (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-kwalletmanager (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-print-manager (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-superkaramba (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded kdeutils-sweeper (4.14.0-1 -> 4.14.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded less (458-1 -> 468-1)
    [2014-09-29 00:15] [PACMAN] upgraded libmariadbclient (10.0.13-1 -> 10.0.14-1)
    [2014-09-29 00:15] [PACMAN] upgraded libpipeline (1.3.0-1 -> 1.3.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded libreoffice-fresh (4.3.1-1 -> 4.3.2-1)
    [2014-09-29 00:15] [PACMAN] upgraded man-pages (3.72-1 -> 3.73-1)
    [2014-09-29 00:15] [PACMAN] upgraded mariadb-clients (10.0.13-1 -> 10.0.14-1)
    [2014-09-29 00:15] [PACMAN] upgraded mariadb (10.0.13-1 -> 10.0.14-1)
    [2014-09-29 00:15] [PACMAN] upgraded poppler-glib (0.26.4-1 -> 0.26.5-1)
    [2014-09-29 00:15] [PACMAN] upgraded python2-setuptools (1:5.8-1 -> 1:6.0.1-1)
    [2014-09-29 00:15] [PACMAN] upgraded sdl (1.2.15-6 -> 1.2.15-7)
    [2014-09-29 00:15] [PACMAN] upgraded sudo (1.8.10.p3-1 -> 1.8.11-1)
    [2014-09-29 00:15] [PACMAN] upgraded tzdata (2014g-1 -> 2014h-1)
    I have substituted xdmrc for kdmrc.pacnew to no avail. I have reinstalled nvidia and kdebase-workspace. kdm.log:
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:26:11 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(590) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(584)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(584)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    (EE) Server terminated successfully (0). Closing log file.
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    drkonqi: cannot connect to X server :0
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:55:05 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(611) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(605)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(605)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:58:58 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(669) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(663)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(663)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 00:59:51 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(707) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(701)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(701)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:05:09 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(770) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(764)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(764)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:11:34 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(813) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(807)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(807)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:16:56 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(859) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(853)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(853)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    drkonqi: cannot connect to X server :0
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:31:24 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(1018) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(1012)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(1012)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    drkonqi: cannot connect to X server :0
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:34:39 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    klauncher(501) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(495)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(495)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    (EE) Server terminated successfully (0). Closing log file.
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:39:30 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    klauncher(641) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(635)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(635)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:41:32 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    klauncher(724) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(718)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(718)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    KCrash: Application 'kdmgreet' crashing...
    KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
    QThread::wait: Thread tried to wait on itself
    QThread: Destroyed while thread is still running
    (EE) Server terminated successfully (0). Closing log file.
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.16.1-1-ARCH x86_64
    Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Build Date: 21 September 2014 10:53:13AM
    Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 01:48:30 2014
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    klauncher(479) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
    kdeinit4: Communication error with launcher. Exiting!
    kdmgreet(473)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
    kdmgreet(473)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
    journalctl -b:
    -- Logs begin at Sun 2014-07-13 21:42:22 BST, end at Mon 2014-09-29 01:48:53 BST. --
    Sep 29 01:48:24 feynman systemd-journal[193]: Runtime journal is using 8.0M (max allowed 393.9M, trying to leave 590.8M free of 3.8G available → current limit 393.9M).
    Sep 29 01:48:24 feynman systemd-journal[193]: Runtime journal is using 8.0M (max allowed 393.9M, trying to leave 590.8M free of 3.8G available → current limit 393.9M).
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys cpuset
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys cpu
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys cpuacct
    Sep 29 01:48:24 feynman kernel: Linux version 3.16.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014
    Sep 29 01:48:24 feynman kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Sep 29 01:48:24 feynman kernel: e820: BIOS-provided physical RAM map:
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000b96e1fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000b96e2000-0x00000000b96e8fff] ACPI NVS
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000b96e9000-0x00000000b9ec6fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000b9ec7000-0x00000000ba151fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000ba152000-0x00000000c9586fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9587000-0x00000000c9a63fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9a64000-0x00000000c9a97fff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9a98000-0x00000000c9b7dfff] ACPI NVS
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9b7e000-0x00000000c9ffefff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000c9fff000-0x00000000c9ffffff] usable
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    Sep 29 01:48:24 feynman kernel: BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
    Sep 29 01:48:24 feynman kernel: NX (Execute Disable) protection: active
    Sep 29 01:48:24 feynman kernel: SMBIOS 2.7 present.
    Sep 29 01:48:24 feynman kernel: DMI: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
    Sep 29 01:48:24 feynman kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Sep 29 01:48:24 feynman kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Sep 29 01:48:24 feynman kernel: AGP: No AGP bridge found
    Sep 29 01:48:24 feynman kernel: e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
    Sep 29 01:48:24 feynman kernel: MTRR default type: uncachable
    Sep 29 01:48:24 feynman kernel: MTRR fixed ranges enabled:
    Sep 29 01:48:24 feynman kernel: 00000-9FFFF write-back
    Sep 29 01:48:24 feynman kernel: A0000-BFFFF uncachable
    Sep 29 01:48:24 feynman kernel: C0000-CFFFF write-protect
    Sep 29 01:48:24 feynman kernel: D0000-E7FFF uncachable
    Sep 29 01:48:24 feynman kernel: E8000-FFFFF write-protect
    Sep 29 01:48:24 feynman kernel: MTRR variable ranges enabled:
    Sep 29 01:48:24 feynman kernel: 0 base 0000000000 mask 7E00000000 write-back
    Sep 29 01:48:24 feynman kernel: 1 base 0200000000 mask 7FE0000000 write-back
    Sep 29 01:48:24 feynman kernel: 2 base 0220000000 mask 7FF0000000 write-back
    Sep 29 01:48:24 feynman kernel: 3 base 00E0000000 mask 7FE0000000 uncachable
    Sep 29 01:48:24 feynman kernel: 4 base 00D0000000 mask 7FF0000000 uncachable
    Sep 29 01:48:24 feynman kernel: 5 base 00CE000000 mask 7FFE000000 uncachable
    Sep 29 01:48:24 feynman kernel: 6 base 00CD000000 mask 7FFF000000 uncachable
    Sep 29 01:48:24 feynman kernel: 7 base 022FE00000 mask 7FFFE00000 uncachable
    Sep 29 01:48:24 feynman kernel: 8 disabled
    Sep 29 01:48:24 feynman kernel: 9 disabled
    Sep 29 01:48:24 feynman kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Sep 29 01:48:24 feynman kernel: e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
    Sep 29 01:48:24 feynman kernel: e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
    Sep 29 01:48:24 feynman kernel: found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
    Sep 29 01:48:24 feynman kernel: Scanning 1 areas for low memory corruption
    Sep 29 01:48:24 feynman kernel: Base memory trampoline at [ffff880000097000] 97000 size 24576
    Sep 29 01:48:24 feynman kernel: Using GB pages for direct mapping
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x00000000-0x000fffff] page 4k
    Sep 29 01:48:24 feynman kernel: BRK [0x01b23000, 0x01b23fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: BRK [0x01b24000, 0x01b24fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: BRK [0x01b25000, 0x01b25fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x22fc00000-0x22fdfffff] page 2M
    Sep 29 01:48:24 feynman kernel: BRK [0x01b26000, 0x01b26fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x22c000000-0x22fbfffff] page 2M
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x200000000-0x22bffffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x200000000-0x22bffffff] page 2M
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x00100000-0xb96e1fff]
    Sep 29 01:48:24 feynman kernel: [mem 0x00100000-0x001fffff] page 4k
    Sep 29 01:48:24 feynman kernel: [mem 0x00200000-0x3fffffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0x40000000-0x7fffffff] page 1G
    Sep 29 01:48:24 feynman kernel: [mem 0x80000000-0xb95fffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0xb9600000-0xb96e1fff] page 4k
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xb96e9000-0xb9ec6fff]
    Sep 29 01:48:24 feynman kernel: [mem 0xb96e9000-0xb97fffff] page 4k
    Sep 29 01:48:24 feynman kernel: [mem 0xb9800000-0xb9dfffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0xb9e00000-0xb9ec6fff] page 4k
    Sep 29 01:48:24 feynman kernel: BRK [0x01b27000, 0x01b27fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xba152000-0xc9586fff]
    Sep 29 01:48:24 feynman kernel: [mem 0xba152000-0xba1fffff] page 4k
    Sep 29 01:48:24 feynman kernel: [mem 0xba200000-0xc93fffff] page 2M
    Sep 29 01:48:24 feynman kernel: [mem 0xc9400000-0xc9586fff] page 4k
    Sep 29 01:48:24 feynman kernel: BRK [0x01b28000, 0x01b28fff] PGTABLE
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xc9a64000-0xc9a97fff]
    Sep 29 01:48:24 feynman kernel: [mem 0xc9a64000-0xc9a97fff] page 4k
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0xc9fff000-0xc9ffffff]
    Sep 29 01:48:24 feynman kernel: [mem 0xc9fff000-0xc9ffffff] page 4k
    Sep 29 01:48:24 feynman kernel: init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    Sep 29 01:48:24 feynman kernel: [mem 0x100000000-0x1ffffffff] page 1G
    Sep 29 01:48:24 feynman kernel: RAMDISK: [mem 0x3790c000-0x37c7dfff]
    Sep 29 01:48:24 feynman kernel: ACPI: Early table checksum verification disabled
    Sep 29 01:48:24 feynman kernel: ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
    Sep 29 01:48:24 feynman kernel: ACPI: XSDT 0x00000000C9B20088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: FACP 0x00000000C9B2D340 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: DSDT 0x00000000C9B201B8 00D182 (v02 ALASKA A M I 00000021 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: FACS 0x00000000C9B7C080 000040
    Sep 29 01:48:24 feynman kernel: ACPI: APIC 0x00000000C9B2D450 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: FPDT 0x00000000C9B2D4E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
    Sep 29 01:48:24 feynman kernel: ACPI: ASF! 0x00000000C9B2D530 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2D5D8 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2E570 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2EAB0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: MCFG 0x00000000C9B2F588 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    Sep 29 01:48:24 feynman kernel: ACPI: HPET 0x00000000C9B2F5C8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2F600 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B2F918 001640 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B30F58 000E64 (v01 SgRef SgPeg 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: DMAR 0x00000000C9B31DC0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0x00000000C9B31E78 0015B3 (v01 OptRef OptTabl 00001000 INTL 20091112)
    Sep 29 01:48:24 feynman kernel: ACPI: Local APIC address 0xfee00000
    Sep 29 01:48:24 feynman kernel: No NUMA configuration found
    Sep 29 01:48:24 feynman kernel: Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
    Sep 29 01:48:24 feynman kernel: Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: NODE_DATA [mem 0x22fdf5000-0x22fdf9fff]
    Sep 29 01:48:24 feynman kernel: [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
    Sep 29 01:48:24 feynman kernel: Zone ranges:
    Sep 29 01:48:24 feynman kernel: DMA [mem 0x00001000-0x00ffffff]
    Sep 29 01:48:24 feynman kernel: DMA32 [mem 0x01000000-0xffffffff]
    Sep 29 01:48:24 feynman kernel: Normal [mem 0x100000000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: Movable zone start for each node
    Sep 29 01:48:24 feynman kernel: Early memory node ranges
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0x00001000-0x0009cfff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0x00100000-0xb96e1fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xb96e9000-0xb9ec6fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xba152000-0xc9586fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xc9a64000-0xc9a97fff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0xc9fff000-0xc9ffffff]
    Sep 29 01:48:24 feynman kernel: node 0: [mem 0x100000000-0x22fdfffff]
    Sep 29 01:48:24 feynman kernel: On node 0 totalpages: 2068678
    Sep 29 01:48:24 feynman kernel: DMA zone: 64 pages used for memmap
    Sep 29 01:48:24 feynman kernel: DMA zone: 21 pages reserved
    Sep 29 01:48:24 feynman kernel: DMA zone: 3996 pages, LIFO batch:0
    Sep 29 01:48:24 feynman kernel: DMA32 zone: 12813 pages used for memmap
    Sep 29 01:48:24 feynman kernel: DMA32 zone: 820010 pages, LIFO batch:31
    Sep 29 01:48:24 feynman kernel: Normal zone: 19448 pages used for memmap
    Sep 29 01:48:24 feynman kernel: Normal zone: 1244672 pages, LIFO batch:31
    Sep 29 01:48:24 feynman kernel: Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
    Sep 29 01:48:24 feynman kernel: ACPI: PM-Timer IO Port: 0x1808
    Sep 29 01:48:24 feynman kernel: ACPI: Local APIC address 0xfee00000
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    Sep 29 01:48:24 feynman kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    Sep 29 01:48:24 feynman kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Sep 29 01:48:24 feynman kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Sep 29 01:48:24 feynman kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Sep 29 01:48:24 feynman kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Sep 29 01:48:24 feynman kernel: ACPI: IRQ0 used by override.
    Sep 29 01:48:24 feynman kernel: ACPI: IRQ2 used by override.
    Sep 29 01:48:24 feynman kernel: ACPI: IRQ9 used by override.
    Sep 29 01:48:24 feynman kernel: Using ACPI (MADT) for SMP configuration information
    Sep 29 01:48:24 feynman kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
    Sep 29 01:48:24 feynman kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    Sep 29 01:48:24 feynman kernel: nr_irqs_gsi: 40
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xb96e2000-0xb96e8fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xb9ec7000-0xba151fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xc9587000-0xc9a63fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xc9a98000-0xc9b7dfff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xc9b7e000-0xc9ffefff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xca000000-0xccffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    Sep 29 01:48:24 feynman kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    Sep 29 01:48:24 feynman kernel: e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
    Sep 29 01:48:24 feynman kernel: Booting paravirtualized kernel on bare hardware
    Sep 29 01:48:24 feynman kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    Sep 29 01:48:24 feynman kernel: PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86784 r8192 d23808 u262144
    Sep 29 01:48:24 feynman kernel: pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    Sep 29 01:48:24 feynman kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Sep 29 01:48:24 feynman kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036332
    Sep 29 01:48:24 feynman kernel: Policy zone: Normal
    Sep 29 01:48:24 feynman kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    Sep 29 01:48:24 feynman kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Sep 29 01:48:24 feynman kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Sep 29 01:48:24 feynman kernel: AGP: Checking aperture...
    Sep 29 01:48:24 feynman kernel: AGP: No AGP bridge found
    Sep 29 01:48:24 feynman kernel: Calgary: detecting Calgary via BIOS EBDA area
    Sep 29 01:48:24 feynman kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Sep 29 01:48:24 feynman kernel: Memory: 8061324K/8274712K available (5335K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 213388K reserved)
    Sep 29 01:48:24 feynman kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    Sep 29 01:48:24 feynman kernel: Preemptible hierarchical RCU implementation.
    Sep 29 01:48:24 feynman kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Sep 29 01:48:24 feynman kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Sep 29 01:48:24 feynman kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    Sep 29 01:48:24 feynman kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    Sep 29 01:48:24 feynman kernel: NR_IRQS:8448 nr_irqs:744 16
    Sep 29 01:48:24 feynman kernel: Console: colour dummy device 80x25
    Sep 29 01:48:24 feynman kernel: console [tty0] enabled
    Sep 29 01:48:24 feynman kernel: allocated 33554432 bytes of page_cgroup
    Sep 29 01:48:24 feynman kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Sep 29 01:48:24 feynman kernel: hpet clockevent registered
    Sep 29 01:48:24 feynman kernel: tsc: Fast TSC calibration using PIT
    Sep 29 01:48:24 feynman kernel: tsc: Detected 2694.062 MHz processor
    Sep 29 01:48:24 feynman kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.62 BogoMIPS (lpj=8980206)
    Sep 29 01:48:24 feynman kernel: pid_max: default: 32768 minimum: 301
    Sep 29 01:48:24 feynman kernel: ACPI: Core revision 20140424
    Sep 29 01:48:24 feynman kernel: ACPI: All ACPI Tables successfully acquired
    Sep 29 01:48:24 feynman kernel: Security Framework initialized
    Sep 29 01:48:24 feynman kernel: Yama: becoming mindful.
    Sep 29 01:48:24 feynman kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Sep 29 01:48:24 feynman kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Sep 29 01:48:24 feynman kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    Sep 29 01:48:24 feynman kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys memory
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys devices
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys freezer
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys net_cls
    Sep 29 01:48:24 feynman kernel: Initializing cgroup subsys blkio
    Sep 29 01:48:24 feynman kernel: CPU: Physical Processor ID: 0
    Sep 29 01:48:24 feynman kernel: CPU: Processor Core ID: 0
    Sep 29 01:48:24 feynman kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    Sep 29 01:48:24 feynman kernel: mce: CPU supports 9 MCE banks
    Sep 29 01:48:24 feynman kernel: CPU0: Thermal monitoring enabled (TM1)
    Sep 29 01:48:24 feynman kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    Sep 29 01:48:24 feynman kernel: Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    Sep 29 01:48:24 feynman kernel: ftrace: allocating 20438 entries in 80 pages
    Sep 29 01:48:24 feynman kernel: dmar: Host address width 39
    Sep 29 01:48:24 feynman kernel: dmar: DRHD base: 0x000000fed90000 flags: 0x0
    Sep 29 01:48:24 feynman kernel: dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    Sep 29 01:48:24 feynman kernel: dmar: DRHD base: 0x000000fed91000 flags: 0x1
    Sep 29 01:48:24 feynman kernel: dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    Sep 29 01:48:24 feynman kernel: dmar: RMRR base: 0x000000c97a6000 end: 0x000000c97b2fff
    Sep 29 01:48:24 feynman kernel: dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
    Sep 29 01:48:24 feynman kernel: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    Sep 29 01:48:24 feynman kernel: HPET id 0 under DRHD base 0xfed91000
    Sep 29 01:48:24 feynman kernel: Queued invalidation will be enabled to support x2apic and Intr-remapping.
    Sep 29 01:48:24 feynman kernel: Enabled IRQ remapping in x2apic mode
    Sep 29 01:48:24 feynman kernel: Enabling x2apic
    Sep 29 01:48:24 feynman kernel: Enabled x2apic
    Sep 29 01:48:24 feynman kernel: Switched APIC routing to cluster x2apic.
    Sep 29 01:48:24 feynman kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Sep 29 01:48:24 feynman kernel: smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    Sep 29 01:48:24 feynman kernel: TSC deadline timer enabled
    Sep 29 01:48:24 feynman kernel: Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    Sep 29 01:48:24 feynman kernel: ... version: 3
    Sep 29 01:48:24 feynman kernel: ... bit width: 48
    Sep 29 01:48:24 feynman kernel: ... generic registers: 4
    Sep 29 01:48:24 feynman kernel: ... value mask: 0000ffffffffffff
    Sep 29 01:48:24 feynman kernel: ... max period: 0000ffffffffffff
    Sep 29 01:48:24 feynman kernel: ... fixed-purpose events: 3
    Sep 29 01:48:24 feynman kernel: ... event mask: 000000070000000f
    Sep 29 01:48:24 feynman kernel: x86: Booting SMP configuration:
    Sep 29 01:48:24 feynman kernel: .... node #0, CPUs: #1
    Sep 29 01:48:24 feynman kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Sep 29 01:48:24 feynman kernel: #2 #3 #4 #5 #6 #7
    Sep 29 01:48:24 feynman kernel: x86: Booted up 1 node, 8 CPUs
    Sep 29 01:48:24 feynman kernel: smpboot: Total of 8 processors activated (43122.03 BogoMIPS)
    Sep 29 01:48:24 feynman kernel: devtmpfs: initialized
    Sep 29 01:48:24 feynman kernel: PM: Registering ACPI NVS region [mem 0xb96e2000-0xb96e8fff] (28672 bytes)
    Sep 29 01:48:24 feynman kernel: PM: Registering ACPI NVS region [mem 0xc9a98000-0xc9b7dfff] (942080 bytes)
    Sep 29 01:48:24 feynman kernel: pinctrl core: initialized pinctrl subsystem
    Sep 29 01:48:24 feynman kernel: RTC time: 0:48:18, date: 09/29/14
    Sep 29 01:48:24 feynman kernel: NET: Registered protocol family 16
    Sep 29 01:48:24 feynman kernel: cpuidle: using governor ladder
    Sep 29 01:48:24 feynman kernel: cpuidle: using governor menu
    Sep 29 01:48:24 feynman kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    Sep 29 01:48:24 feynman kernel: ACPI: bus type PCI registered
    Sep 29 01:48:24 feynman kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Sep 29 01:48:24 feynman kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    Sep 29 01:48:24 feynman kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    Sep 29 01:48:24 feynman kernel: PCI: Using configuration type 1 for base access
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(Module Device)
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(Processor Device)
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Sep 29 01:48:24 feynman kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Sep 29 01:48:24 feynman kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Sep 29 01:48:24 feynman kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Sep 29 01:48:24 feynman kernel: ACPI: Dynamic OEM Table Load:
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0xFFFF88022380B000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: Dynamic OEM Table Load:
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0xFFFF880223889000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: Dynamic OEM Table Load:
    Sep 29 01:48:24 feynman kernel: ACPI: SSDT 0xFFFF880223869600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    Sep 29 01:48:24 feynman kernel: ACPI: Interpreter enabled
    Sep 29 01:48:24 feynman kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    Sep 29 01:48:24 feynman kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    Sep 29 01:48:24 feynman kernel: ACPI: (supports S0 S3 S4 S5)
    Sep 29 01:48:24 feynman kernel: ACPI: Using IOAPIC for interrupt routing
    Sep 29 01:48:24 feynman kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Sep 29 01:48:24 feynman kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    Sep 29 01:48:24 feynman kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Sep 29 01:48:24 feynman kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    Sep 29 01:48:24 feynman kernel: acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    Sep 29 01:48:24 feynman kernel: PCI host bridge to bus 0000:00
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [bus 00-3e]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    Sep 29 01:48:24 feynman kernel: pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    Sep 29 01:48:24 feynman kernel: pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    Sep 29 01:48:24 feynman kernel: pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:14.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    Sep 29 01:48:24 feynman kernel: pci 0000:00:16.0: reg 0x10: [mem 0xf7a1f000-0xf7a1f00f 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1c.3: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    Sep 29 01:48:24 feynman kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf

    Hi berbae,
    berbae wrote:That's not what your logs say:
    Can you explain exactly how you start your computer and when you log in as user?
    I may have grabbed that info after restarting the kdm service manually.
    The issue happens on a normal bootup, just by pressing the power button and waiting. :-) To reiterate: a pitch black screen as if the LCD is turned off. The login prompt is there waiting in the dark, if I blindly input my password it starts KDE (I hear the disk and see the processes with
    ps -ef
    The following is the state of my system after pressing ctrl-alt-f1, logging in as root and mounting a pen.
    dmesg and Xorg.0.log look particularly nasty:
    dmesg:
    [ 10.422380] enhanceio: Allocate 20398KB (8B per) mem for 2610944-entry cache (capacity:10238MB, associativity:256, block size:4096 bytes)
    [ 10.422380] sound hdaudioC0D0: autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
    [ 10.422384] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.422385] sound hdaudioC0D0: hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
    [ 10.422386] sound hdaudioC0D0: mono: mono_out=0x0
    [ 10.422387] sound hdaudioC0D0: dig-out=0x2d/0x0
    [ 10.422388] sound hdaudioC0D0: inputs:
    [ 10.422390] sound hdaudioC0D0: Mic=0x2b
    [ 10.422391] sound hdaudioC0D0: Internal Mic=0x29
    [ 10.430634] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input18
    [ 10.430719] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input19
    [ 10.430791] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input20
    [ 10.430997] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 10.431638] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 10.617688] enhanceio: Cache metadata loaded from disk with 438613 valid 0 dirty blocks
    [ 10.617691] enhanceio: Setting mode to write through
    [ 10.617890] enhanceio_lru: Initialized 10199 sets in LRU
    [ 10.618160] enhanceio: Cache metadata loaded from disk with 438613 valid 0 dirty blocks
    [ 10.618162] enhanceio: Setting mode to write through
    [ 10.618355] enhanceio_lru: Initialized 10199 sets in LRU
    [ 10.656047] ------------[ cut here ]------------
    [ 10.656053] WARNING: CPU: 3 PID: 352 at fs/proc/generic.c:315 proc_register+0xc0/0x140()
    [ 10.656054] proc_dir_entry 'enhanceio/usr_cache' already registered
    [ 10.656055] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_via snd_hda_codec_generic enhanceio_rand(O) enhanceio_lru(O) enhanceio_fifo(O) enhanceio(O) coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel arc4 iwldvm ghash_clmulni_intel snd_hda_intel snd_hda_controller aesni_intel joydev mousedev i915 led_class mac80211 aes_x86_64 snd_hda_codec lrw ecb gf128mul btusb i2c_i801 iwlwifi glue_helper iTCO_wdt snd_hwdep drm_kms_helper bluetooth drm iTCO_vendor_support snd_pcm cfg80211 6lowpan_iphc intel_gtt mei_me i2c_algo_bit ablk_helper i2c_core rfkill cryptd r8169 snd_timer rtsx_pci_ms memstick evdev mii mxm_wmi snd mei mac_hid soundcore shpchp lpc_ich microcode psmouse serio_raw tpm_infineon tpm_tis tpm video thermal processor
    [ 10.656084] pcspkr battery button ac wmi usbip_host(C) usbip_core(C) ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom crc_t10dif crct10dif_common rtsx_pci_sdmmc atkbd libps2 mmc_core ehci_pci xhci_hcd ehci_hcd ahci libahci libata usbcore scsi_mod rtsx_pci usb_common i8042 serio
    [ 10.656096] CPU: 3 PID: 352 Comm: eio_cli Tainted: G C O 3.16.3-1-ARCH #1
    [ 10.656097] Hardware name: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
    [ 10.656098] 0000000000000000 00000000319638dd ffff88021eda7bf0 ffffffff8152b3bc
    [ 10.656100] ffff88021eda7c38 ffff88021eda7c28 ffffffff8106e45d ffff880222f323c0
    [ 10.656101] ffff88021f552df3 ffff88021f552d80 ffff880222e94f00 ffff880222f323c0
    [ 10.656102] Call Trace:
    [ 10.656106] [<ffffffff8152b3bc>] dump_stack+0x4d/0x6f
    [ 10.656109] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
    [ 10.656110] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
    [ 10.656112] [<ffffffff8122c1e4>] ? proc_alloc_inum+0x54/0xe0
    [ 10.656114] [<ffffffff8122c330>] proc_register+0xc0/0x140
    [ 10.656115] [<ffffffff8122c4b2>] proc_mkdir_data+0x52/0x80
    [ 10.656117] [<ffffffff8122c515>] proc_mkdir+0x15/0x20
    [ 10.656120] [<ffffffffa07ae25e>] eio_procfs_ctr+0x2e/0x220 [enhanceio]
    [ 10.656122] [<ffffffffa07a4cb0>] eio_cache_create+0x1270/0x1990 [enhanceio]
    [ 10.656125] [<ffffffff8118a1ae>] ? map_vm_area+0x2e/0x40
    [ 10.656126] [<ffffffff8118b4a0>] ? __vmalloc_node_range+0x200/0x290
    [ 10.656128] [<ffffffffa07a57c6>] ? eio_ioctl+0x2b6/0x310 [enhanceio]
    [ 10.656130] [<ffffffffa07a57ef>] eio_ioctl+0x2df/0x310 [enhanceio]
    [ 10.656133] [<ffffffff811d4af0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 10.656135] [<ffffffff811d4d51>] SyS_ioctl+0x81/0xa0
    [ 10.656137] [<ffffffff81531129>] system_call_fastpath+0x16/0x1b
    [ 10.656138] ---[ end trace ba917aef9e72708f ]---
    [ 10.656143] sysctl duplicate entry: /dev/enhanceio/usr_cache//zero_stats
    [ 10.656172] CPU: 3 PID: 352 Comm: eio_cli Tainted: G WC O 3.16.3-1-ARCH #1
    [ 10.656172] Hardware name: Notebook W350STQ/W370ST /W350STQ/W370ST , BIOS 4.6.5 06/14/2013
    [ 10.656173] 0000000000000000 00000000319638dd ffff88021eda7c30 ffffffff8152b3bc
    [ 10.656174] 0000000000000000 ffff88021eda7c98 ffffffff81232da5 0000000000000000
    [ 10.656175] ffff88021eda7c70 ffff88021f552900 ffff88022309e300 0000000000000000
    [ 10.656177] Call Trace:
    [ 10.656178] [<ffffffff8152b3bc>] dump_stack+0x4d/0x6f
    [ 10.656180] [<ffffffff81232da5>] __register_sysctl_table+0x405/0x660
    [ 10.656181] [<ffffffff812333ed>] __register_sysctl_paths+0x1dd/0x200
    [ 10.656184] [<ffffffff811a5fba>] ? __kmalloc+0x18a/0x1c0
    [ 10.656186] [<ffffffff8123344f>] register_sysctl_table+0x1f/0x30
    [ 10.656188] [<ffffffffa07ae3bf>] eio_procfs_ctr+0x18f/0x220 [enhanceio]
    [ 10.656189] [<ffffffffa07a4cb0>] eio_cache_create+0x1270/0x1990 [enhanceio]
    [ 10.656190] [<ffffffff8118a1ae>] ? map_vm_area+0x2e/0x40
    [ 10.656192] [<ffffffff8118b4a0>] ? __vmalloc_node_range+0x200/0x290
    [ 10.656193] [<ffffffffa07a57c6>] ? eio_ioctl+0x2b6/0x310 [enhanceio]
    [ 10.656195] [<ffffffffa07a57ef>] eio_ioctl+0x2df/0x310 [enhanceio]
    [ 10.656197] [<ffffffff811d4af0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 10.656198] [<ffffffff811d4d51>] SyS_ioctl+0x81/0xa0
    [ 10.656200] [<ffffffff81531129>] system_call_fastpath+0x16/0x1b
    [ 10.656201] Failed to register common sysctl
    [ 10.659094] cache_create: Device is already cached.
    [ 11.478308] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.485810] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x0
    [ 11.518234] nvidia: module license 'NVIDIA' taints kernel.
    [ 11.518238] Disabling lock debugging due to kernel taint
    [ 11.525193] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [ 11.525197] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
    [ 11.526152] vgaarb: this pci device is not a vga device
    [ 11.526429] nvidia 0000:01:00.0: irq 52 for MSI/MSI-X
    [ 11.528294] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528340] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528369] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528403] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528431] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528459] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528490] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.528525] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 11.550137] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.557694] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x0
    [ 11.625420] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
    [ 11.628649] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 12.148668] cfg80211: Calling CRDA to update world regulatory domain
    [ 12.183699] wlp3s0: authenticate with c4:04:15:e5:ba:60
    [ 12.202127] wlp3s0: send auth to c4:04:15:e5:ba:60 (try 1/3)
    [ 12.204424] wlp3s0: authenticated
    [ 12.205180] wlp3s0: associate with c4:04:15:e5:ba:60 (try 1/3)
    [ 12.210701] wlp3s0: RX AssocResp from c4:04:15:e5:ba:60 (capab=0x11 status=0 aid=2)
    [ 12.213604] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
    [ 12.213637] wlp3s0: associated
    [ 12.213651] cfg80211: Calling CRDA to update world regulatory domain
    [ 13.284862] vgaarb: this pci device is not a vga device
    [ 187.535119] usb 3-2: new high-speed USB device number 3 using xhci_hcd
    [ 187.860846] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 187.860858] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 188.275010] usb-storage 3-2:1.0: USB Mass Storage device detected
    [ 188.275105] scsi6 : usb-storage 3-2:1.0
    [ 188.275160] usbcore: registered new interface driver usb-storage
    [ 188.276007] usbcore: registered new interface driver uas
    [ 189.278473] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 112 1.00 PQ: 0 ANSI: 2
    [ 189.278903] sd 6:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
    [ 189.279055] sd 6:0:0:0: [sdc] Write Protect is off
    [ 189.279058] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
    [ 189.279200] sd 6:0:0:0: [sdc] No Caching mode page found
    [ 189.280334] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    [ 189.283005] sdc: sdc1
    [ 189.283774] sd 6:0:0:0: [sdc] Attached SCSI removable disk
    Xorg.0.log
    [ 11.389]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 11.389] X Protocol Version 11, Revision 0
    [ 11.389] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 11.389] Current Operating System: Linux feynman 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    [ 11.389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=a4d99c8f-d440-46c2-aa60-bf3e5c4ef4c5 rw quiet
    [ 11.389] Build Date: 21 September 2014 10:53:13AM
    [ 11.389]
    [ 11.389] Current version of pixman: 0.32.6
    [ 11.389] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 11.389] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 11.389] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 29 22:49:40 2014
    [ 11.402] (==) Using config file: "/etc/X11/xorg.conf"
    [ 11.402] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 11.411] (==) ServerLayout "layout"
    [ 11.411] (**) |-->Screen "nvidia" (0)
    [ 11.411] (**) | |-->Monitor "<default monitor>"
    [ 11.411] (**) | |-->Device "nvidia"
    [ 11.411] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 11.411] (**) |-->Inactive Device "intel"
    [ 11.411] (==) Automatically adding devices
    [ 11.411] (==) Automatically enabling devices
    [ 11.411] (==) Automatically adding GPU devices
    [ 11.414] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 11.414] Entry deleted from font path.
    [ 11.414] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 11.414] Entry deleted from font path.
    [ 11.414] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 11.414] Entry deleted from font path.
    [ 11.414] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 11.414] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 11.414] Entry deleted from font path.
    [ 11.414] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 11.414] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 11.414] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 11.414] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 11.414] (II) Loader magic: 0x818d80
    [ 11.414] (II) Module ABI versions:
    [ 11.414] X.Org ANSI C Emulation: 0.4
    [ 11.414] X.Org Video Driver: 18.0
    [ 11.414] X.Org XInput driver : 21.0
    [ 11.414] X.Org Server Extension : 8.0
    [ 11.414] (EE) systemd-logind: failed to get session: PID 410 does not belong to any known session
    [ 11.415] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 11.415] (--) PCI:*(0:0:2:0) 8086:0416:1558:3537 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 11.415] (--) PCI: (0:1:0:0) 10de:11e2:1558:3537 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 11.415] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 11.416] (II) LoadModule: "glx"
    [ 11.417] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 11.425] (II) Module glx: vendor="X.Org Foundation"
    [ 11.425] compiled for 1.16.1, module version = 1.0.0
    [ 11.425] ABI class: X.Org Server Extension, version 8.0
    [ 11.425] (==) AIGLX enabled
    [ 11.425] (II) LoadModule: "nvidia"
    [ 11.425] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 11.432] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 11.432] compiled for 4.0.2, module version = 1.0.0
    [ 11.432] Module class: X.Org Video Driver
    [ 11.433] (II) LoadModule: "modesetting"
    [ 11.433] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 11.433] (II) Module modesetting: vendor="X.Org Foundation"
    [ 11.433] compiled for 1.16.0, module version = 0.9.0
    [ 11.433] Module class: X.Org Video Driver
    [ 11.433] ABI class: X.Org Video Driver, version 18.0
    [ 11.433] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
    [ 11.433] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 11.434] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 11.434] (++) using VT number 7
    [ 11.438] (II) Loading sub module "fb"
    [ 11.438] (II) LoadModule: "fb"
    [ 11.439] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 11.440] (II) Module fb: vendor="X.Org Foundation"
    [ 11.440] compiled for 1.16.1, module version = 1.0.0
    [ 11.440] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.440] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 11.440] (II) Loading sub module "wfb"
    [ 11.440] (II) LoadModule: "wfb"
    [ 11.440] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 11.441] (II) Module wfb: vendor="X.Org Foundation"
    [ 11.441] compiled for 1.16.1, module version = 1.0.0
    [ 11.441] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 11.441] (II) Loading sub module "ramdac"
    [ 11.441] (II) LoadModule: "ramdac"
    [ 11.441] (II) Module "ramdac" already built-in
    [ 11.514] (II) modesetting(1): using drv /dev/dri/card0
    [ 11.514] (II) modesetting(G0): using drv /dev/dri/card0
    [ 11.514] (EE) Screen 1 deleted because of no matching config section.
    [ 11.514] (II) UnloadModule: "modesetting"
    [ 11.514] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "nvidia" for depth/fbbpp 24/32
    [ 11.514] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 11.514] (==) NVIDIA(0): RGB weight 888
    [ 11.514] (==) NVIDIA(0): Default visual is TrueColor
    [ 11.514] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 11.514] (**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
    [ 11.514] (**) NVIDIA(0): Option "DPI" "106 x 106"
    [ 11.514] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
    [ 11.514] (**) NVIDIA(0): Enabling 2D acceleration
    [ 11.514] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    [ 11.514] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    [ 11.514] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    [ 11.514] (EE) NVIDIA(0): you continue to encounter problems, Please try
    [ 11.514] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    [ 12.009] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 12.010] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
    [ 12.010] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 12.010] (--) NVIDIA(0): VideoBIOS: 80.06.51.00.17
    [ 12.010] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 12.010] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
    [ 12.010] (--) NVIDIA(0): none
    [ 12.010] (II) NVIDIA(0): Validated MetaModes:
    [ 12.010] (II) NVIDIA(0): "NULL"
    [ 12.010] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 12.010] (**) NVIDIA(0): DPI set to (106, 106); computed from "DPI" X config option
    [ 12.010] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 12.010] (==) modesetting(G0): RGB weight 888
    [ 12.010] (==) modesetting(G0): Default visual is TrueColor
    [ 12.010] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 12.011] (II) modesetting(G0): Output eDP-1-0 has no monitor section
    [ 12.012] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 12.012] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 12.013] (II) modesetting(G0): EDID for output eDP-1-0
    [ 12.013] (II) modesetting(G0): Manufacturer: CMO Model: 1720 Serial#: 0
    [ 12.013] (II) modesetting(G0): Year: 2011 Week: 2
    [ 12.013] (II) modesetting(G0): EDID Version: 1.4
    [ 12.013] (II) modesetting(G0): Digital Display Input
    [ 12.013] (II) modesetting(G0): 6 bits per channel
    [ 12.013] (II) modesetting(G0): Digital interface is undefined
    [ 12.013] (II) modesetting(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
    [ 12.013] (II) modesetting(G0): Gamma: 2.20
    [ 12.013] (II) modesetting(G0): No DPMS capabilities specified
    [ 12.013] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
    [ 12.013] (II) modesetting(G0): First detailed timing is preferred mode
    [ 12.013] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
    [ 12.013] (II) modesetting(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.610
    [ 12.013] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 12.013] (II) modesetting(G0): Manufacturer's mask: 0
    [ 12.013] (II) modesetting(G0): Supported detailed timing:
    [ 12.013] (II) modesetting(G0): clock: 140.5 MHz Image Size: 382 x 215 mm
    [ 12.013] (II) modesetting(G0): h_active: 1920 h_sync: 1972 h_sync_end 2007 h_blank_end 2094 h_border: 0
    [ 12.013] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1118 v_border: 0
    [ 12.013] (II) modesetting(G0): Supported detailed timing:
    [ 12.013] (II) modesetting(G0): clock: 92.5 MHz Image Size: 382 x 215 mm
    [ 12.013] (II) modesetting(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 12.013] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 12.013] (II) modesetting(G0): HC9GKÄ173HGE
    [ 12.013] (II) modesetting(G0): Unknown vendor-specific block 0
    [ 12.013] (II) modesetting(G0): EDID (in hex):
    [ 12.013] (II) modesetting(G0): 00ffffffffffff000daf201700000000
    [ 12.013] (II) modesetting(G0): 021501049026157802ed95a3544c9c26
    [ 12.013] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 12.013] (II) modesetting(G0): 010101010101e13680ae703826403423
    [ 12.013] (II) modesetting(G0): 36007ed71000001a1d2480a070381f40
    [ 12.013] (II) modesetting(G0): 302035007ed71000001a000000fe0048
    [ 12.013] (II) modesetting(G0): 4339474b803137334847450a00000000
    [ 12.013] (II) modesetting(G0): 000041319e0000000002010a202000f3
    [ 12.013] (II) modesetting(G0): Printing probed modes for output eDP-1-0
    [ 12.013] (II) modesetting(G0): Modeline "1920x1080"x60.0 140.49 1920 1972 2007 2094 1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
    [ 12.013] (II) modesetting(G0): Modeline "1920x1080"x40.0 92.45 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
    [ 12.013] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 12.013] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 12.014] (II) modesetting(G0): EDID for output VGA-1-0
    [ 12.014] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 12.014] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 12.014] (==) modesetting(G0): DPI set to (96, 96)
    [ 12.014] (II) Loading sub module "fb"
    [ 12.014] (II) LoadModule: "fb"
    [ 12.014] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 12.014] (II) Module fb: vendor="X.Org Foundation"
    [ 12.014] compiled for 1.16.1, module version = 1.0.0
    [ 12.014] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.014] (II) Loading sub module "shadow"
    [ 12.014] (II) LoadModule: "shadow"
    [ 12.014] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 12.015] (II) Module shadow: vendor="X.Org Foundation"
    [ 12.015] compiled for 1.16.1, module version = 1.1.0
    [ 12.015] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 12.015] (--) Depth 24 pixmap format is 32 bpp
    [ 12.017] (==) modesetting(G0): Backing store enabled
    [ 12.017] (==) modesetting(G0): Silken mouse enabled
    [ 12.017] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 12.017] (==) modesetting(G0): DPMS enabled
    [ 12.017] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
    [ 13.273] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 13.273] (II) NVIDIA: access.
    [ 13.277] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 13.277] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 13.277] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 13.277] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 13.277] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 13.277] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 13.277] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 13.277] (II) NVIDIA(0): Config Options in the README.
    [ 13.277] (II) NVIDIA(0): Setting mode "NULL"
    [ 13.277] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 13.277] (EE) NVIDIA(0): Failed to complete mode change
    [ 13.287] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 13.291] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 13.291] (==) NVIDIA(0): Backing store enabled
    [ 13.291] (==) NVIDIA(0): Silken mouse enabled
    [ 13.291] (==) NVIDIA(0): DPMS enabled
    [ 13.331] (II) Loading sub module "dri2"
    [ 13.331] (II) LoadModule: "dri2"
    [ 13.331] (II) Module "dri2" already built-in
    [ 13.331] (II) NVIDIA(0): [DRI2] Setup complete
    [ 13.331] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 13.331] (--) RandR disabled
    [ 13.335] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 13.335] (EE) AIGLX: reverting to software rendering
    [ 13.421] (II) AIGLX: Loaded and initialized swrast
    [ 13.421] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 13.421] (II) modesetting(G0): Damage tracking initialized
    [ 13.467] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 13.467] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.467] (II) LoadModule: "evdev"
    [ 13.467] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 13.469] (II) Module evdev: vendor="X.Org Foundation"
    [ 13.469] compiled for 1.16.0, module version = 2.9.0
    [ 13.469] Module class: X.Org XInput Driver
    [ 13.469] ABI class: X.Org XInput driver, version 21.0
    [ 13.469] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.469] (**) Power Button: always reports core events
    [ 13.469] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 13.470] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.470] (--) evdev: Power Button: Found keys
    [ 13.470] (II) evdev: Power Button: Configuring as keyboard
    [ 13.470] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
    [ 13.470] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 13.470] (**) Option "xkb_rules" "evdev"
    [ 13.470] (**) Option "xkb_model" "pc104"
    [ 13.470] (**) Option "xkb_layout" "us"
    [ 13.482] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 13.482] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 13.482] (II) Using input driver 'evdev' for 'Video Bus'
    [ 13.482] (**) Video Bus: always reports core events
    [ 13.482] (**) evdev: Video Bus: Device: "/dev/input/event8"
    [ 13.482] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 13.482] (--) evdev: Video Bus: Found keys
    [ 13.482] (II) evdev: Video Bus: Configuring as keyboard
    [ 13.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event8"
    [ 13.482] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 13.482] (**) Option "xkb_rules" "evdev"
    [ 13.482] (**) Option "xkb_model" "pc104"
    [ 13.482] (**) Option "xkb_layout" "us"
    [ 13.482] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 13.482] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 13.482] (II) Using input driver 'evdev' for 'Video Bus'
    [ 13.482] (**) Video Bus: always reports core events
    [ 13.482] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 13.482] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 13.482] (--) evdev: Video Bus: Found keys
    [ 13.482] (II) evdev: Video Bus: Configuring as keyboard
    [ 13.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:00/input/input14/event7"
    [ 13.482] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 13.482] (**) Option "xkb_rules" "evdev"
    [ 13.482] (**) Option "xkb_model" "pc104"
    [ 13.482] (**) Option "xkb_layout" "us"
    [ 13.482] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 13.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 13.482] (II) Using input driver 'evdev' for 'Power Button'
    [ 13.482] (**) Power Button: always reports core events
    [ 13.482] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 13.482] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 13.482] (--) evdev: Power Button: Found keys
    [ 13.482] (II) evdev: Power Button: Configuring as keyboard
    [ 13.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event1"
    [ 13.482] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 13.482] (**) Option "xkb_rules" "evdev"
    [ 13.482] (**) Option "xkb_model" "pc104"
    [ 13.482] (**) Option "xkb_layout" "us"
    [ 13.483] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 13.483] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 13.483] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 13.483] (**) Sleep Button: always reports core events
    [ 13.483] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 13.483] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 13.483] (--) evdev: Sleep Button: Found keys
    [ 13.483] (II) evdev: Sleep Button: Configuring as keyboard
    [ 13.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
    [ 13.483] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [ 13.483] (**) Option "xkb_rules" "evdev"
    [ 13.483] (**) Option "xkb_model" "pc104"
    [ 13.483] (**) Option "xkb_layout" "us"
    [ 13.483] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 13.483] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 13.483] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
    [ 13.483] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.483] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
    [ 13.483] (II) No input driver specified, ignoring this device.
    [ 13.483] (II) This device may have been added with another device file.
    [ 13.484] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 13.484] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 13.484] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 13.484] (**) AT Translated Set 2 keyboard: always reports core events
    [ 13.484] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 13.484] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 13.484] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 13.484] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 13.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 13.484] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 13.484] (**) Option "xkb_rules" "evdev"
    [ 13.484] (**) Option "xkb_model" "pc104"
    [ 13.484] (**) Option "xkb_layout" "us"
    [ 13.484] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 13.484] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 13.484] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 13.484] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 13.484] (II) LoadModule: "synaptics"
    [ 13.484] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 13.485] (II) Module synaptics: vendor="X.Org Foundation"
    [ 13.485] compiled for 1.16.0, module version = 1.8.1
    [ 13.485] Module class: X.Org XInput Driver
    [ 13.485] ABI class: X.Org XInput driver, version 21.0
    [ 13.485] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 13.485] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 13.485] (**) Option "Device" "/dev/input/event6"
    [ 13.596] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692 (res 66)
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680 (res 102)
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 13.596] (**) Option "TapButton1" "1"
    [ 13.596] (**) Option "TapButton2" "2"
    [ 13.596] (**) Option "TapButton3" "3"
    [ 13.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13.596] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 13.650] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input11/event6"
    [ 13.650] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 13.650] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 13.650] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 13.650] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 13.650] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 13.650] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 13.650] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 13.650] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 13.650] (II) No input driver specified, ignoring this device.
    [ 13.650] (II) This device may have been added with another device file.
    [ 13.668] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
    [ 13.668] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 13.668] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 13.668] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
    lspci
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    03:00.0 Network controller: Intel Corporation Centrino Wireless-N 135 (rev c4)
    04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
    04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
    lspci -vv for the vga and 3d controllers (this is an Optimus laptop):
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
    Subsystem: CLEVO/KAPOK Computer Device 3537
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 49
    Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee00018 Data: 0000
    Capabilities: [d0] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a4] PCI Advanced Features
    AFCap: TP+ FLR+
    AFCtrl: FLR-
    AFStatus: TP-
    Kernel driver in use: i915
    Kernel modules: i915
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    Subsystem: CLEVO/KAPOK Computer Device 3537
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 52
    Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at e000 [size=128]
    [virtual] Expansion ROM at f7000000 [disabled] [size=512K]
    Capabilities: [60] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee00438 Data: 0000
    Capabilities: [78] Express (v2) Endpoint, MSI 00
    DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
    ClockPM+ Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
    ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
    LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
    EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest+
    Capabilities: [b4] Vendor Specific Information: Len=14 <?>
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    Capabilities: [128 v1] Power Budgeting <?>
    Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Capabilities: [900 v1] #19
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
    EndSection
    Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:PCI address determined earlier"
    # e.g. BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration"
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "modesetting"
    EndSection
    Section "Screen"
    Identifier "intel"
    Device "intel"
    EndSection
    systemctl status:
    ● feynman
    State: running
    Jobs: 0 queued
    Failed: 0 units
    Since: Mon 2014-09-29 22:49:32 BST; 7min ago
    CGroup: /
    ├─1 /sbin/init
    ├─system.slice
    │ ├─dbus.service
    │ │ └─394 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
    │ ├─system-netctl\x2dauto.slice
    │ │ └─[email protected]
    │ │ ├─418 wpa_supplicant -B -P /run/wpa_supplicant_wlp3s0.pid -i wlp3s0 -D nl80211,wext -c/run/network/wpa_supplicant_wlp3s0.conf -W
    │ │ ├─420 wpa_actiond -p /run/wpa_supplicant -i wlp3s0 -P /run/network/wpa_actiond_wlp3s0.pid -a /usr/lib/network/auto.action
    │ │ └─545 dhcpcd -4 -q -t 30 -K -L wlp3s0
    │ ├─systemd-journald.service
    │ │ └─192 /usr/lib/systemd/systemd-journald
    │ ├─systemd-logind.service
    │ │ └─393 /usr/lib/systemd/systemd-logind
    │ ├─systemd-udevd.service
    │ │ └─222 /usr/lib/systemd/systemd-udevd
    │ ├─kdm.service
    │ │ ├─408 /usr/bin/kdm -nodaemon
    │ │ ├─410 /usr/bin/Xorg.bin -br -novtswitch -quiet :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-XeCSpb
    │ │ ├─493 -:0
    │ │ └─494 /usr/lib/kde4/libexec/kdm_greet
    │ └─gpm.service
    │ └─395 /usr/bin/gpm -m /dev/input/mice -t imps2
    └─user.slice
    └─user-0.slice
    ├─[email protected]
    │ ├─547 /usr/lib/systemd/systemd --user
    │ └─549 (sd-pam)
    └─session-c1.scope
    ├─407 login -- root
    ├─551 -bash
    └─591 systemctl status

  • [solved]black screen with xorg 1.6 after resume (intel)

    after upgrading to xorg-server 1.6 no matter if i use s2ram or s2disk, first resume works fine, the second suspend and resume results in a black screen without any chance to swich to any tty.
    i have read about bug like this which was resolved with using intel legacy driver. however my problem still occures.
    maybe there is some module i should load/unload/reload on hibernate/wake-up?
    here is my xorg.conf, lspci, Xorg.0.log.old (the one i had to kill with black screen) and Xorg.0.log
    xorg.conf
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap" "false"
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Cursor" "SendCoreEvents"
    InputDevice "Stylus" "SendCoreEvents"
    InputDevice "Eraser" "SendCoreEvents"
    EndSection
    Section "InputDevice"
    Identifier "Cursor"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "Mode" "Absolute"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "InputDevice"
    Identifier "Stylus"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "TPCButton" "off"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    Option "Mode" "Absolute"
    EndSection
    Section "InputDevice"
    Identifier "Eraser"
    Driver "wacom"
    Option "Device" "/dev/ttyS0"
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4"
    Option "KeepShape" "on"
    Option "BottomY" "18432"
    Option "BottomX" "24576"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/local"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "xtrap"
    Load "dbe"
    Load "dri"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "base"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de, ru"
    Option "XkbVariant" "nodeadkeys, winkeys"
    Option "XkbOptions" "grp:caps_toggle"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
    BusID "PCI:0:2:0"
    Option "FramebufferCompression" "on"
    Option "AccelMethod" "EXA"
    Option "Tiling" "on"
    Option "TrippleBuffer" "true"
    Option "MigrationHeuristic" "greedy"
    Option "RenderAccel" "true"
    Option "ExaNoComposite" "false"
    Option "EnablePageFlip" "true"
    Option "DRI" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "dri"
    Mode 0666
    EndSection
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11)
    04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
    04:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
    04:02.0 Ethernet controller: Atheros Communications Inc. AR5212 802.11abg NIC (rev 01)
    Xorg.0.log
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:54 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Wacom Serial Tablet PC Pen Tablet/Digitizer
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x04000000 (pgoffset 16384)
    (II) intel(0): xf86UnbindGARTMemory: unbind key 5
    Xorg.0.log.old
    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux thinky 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 10 April 2009 07:03:14PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 19:27:40 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Cursor"
    (**) |-->Input Device "Stylus"
    (**) |-->Input Device "Eraser"
    (**) Option "DontZap" "false"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/local,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xa0080000/524288, 0xc0000000/268435456, 0xa0000000/262144, I/O @ 0x00001800/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0x68000000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "xtrap"
    (WW) Warning, couldn't open module xtrap
    (II) UnloadModule: "xtrap"
    (EE) Failed to load module "xtrap" (module does not exist, 0)
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (WW) Warning, couldn't open module freetype
    (II) UnloadModule: "freetype"
    (EE) Failed to load module "freetype" (module does not exist, 0)
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.3.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Wacom driver level: 47-0.8.3-2 $
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "EXA"
    (**) intel(0): Option "DRI" "on"
    (**) intel(0): Option "FramebufferCompression" "on"
    (**) intel(0): Option "Tiling" "on"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
    (--) intel(0): Chipset: "915GM"
    (--) intel(0): Linear framebuffer at 0xC0000000
    (--) intel(0): IO registers at addr 0xA0080000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (II) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7872 kB
    (II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): No SDVO device found on SDVOB
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1024x768
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 7932 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0c00
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 363776 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1455100 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] loaded kernel module for "i915" driver.
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xa0080000
    (II) intel(0): [drm] ring buffer = 0xc0000000
    (II) intel(0): [drm] mapped front buffer at 0xc0800000, handle = 0xc0800000
    (II) intel(0): [drm] mapped back buffer at 0xc1800000, handle = 0xc1800000
    (II) intel(0): [drm] mapped depth buffer at 0xc1c00000, handle = 0xc1c00000
    (II) intel(0): [drm] mapped classic textures at 0xc2000000, handle = 0xc2000000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 12582912 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00c00000 (pgoffset 3072)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01800000 (pgoffset 6144)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c00000 (pgoffset 7168)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000005f820000 physical
    (II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000005fe20000 physical
    (II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000005fe21000 physical
    (II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
    (II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000005fe33000 physical
    (II) intel(0): 0x007bf000: end of stolen memory
    (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
    (II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
    (II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
    (II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
    (II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane A is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (WW) intel(0): Option "TrippleBuffer" is not used
    (WW) intel(0): Option "RenderAccel" is not used
    (WW) intel(0): Option "EnablePageFlip" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "de, ru"
    (**) Keyboard0: XkbLayout: "de, ru"
    (**) Option "XkbVariant" "nodeadkeys, winkeys"
    (**) Keyboard0: XkbVariant: "nodeadkeys, winkeys"
    (**) Option "XkbOptions" "grp:caps_toggle"
    (**) Keyboard0: XkbOptions: "grp:caps_toggle"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (**) Option "SendCoreEvents"
    (**) Cursor: always reports core events
    (**) Cursor device is /dev/ttyS0
    (**) Cursor is in absolute mode
    (**) Cursor: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Cursor: keeps shape
    (**) Option "BottomX" "24576"
    (**) Cursor: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Cursor: bottom y = 18432
    (**) Option "BaudRate" "9600"
    (**) Cursor: serial speed 9600
    (II) XINPUT: Adding extended input device "Cursor" (type: Wacom Cursor)
    (**) Option "Device" "/dev/ttyS0"
    (**) Option "StopBits" "1"
    (**) Option "DataBits" "8"
    (**) Option "Parity" "None"
    (**) Option "Vmin" "1"
    (**) Option "Vtime" "10"
    (**) Option "FlowControl" "Xoff"
    usbDetect: can not ioctl version
    (==) Wacom using pressure threshold of 15 for button 1
    (==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
    (==) Wacom device "Cursor" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Stylus: always reports core events
    (**) Stylus device is /dev/ttyS0
    (**) Stylus is in absolute mode
    (**) Stylus: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Stylus: keeps shape
    (**) Option "BottomX" "24576"
    (**) Stylus: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Stylus: bottom y = 18432
    (**) Stylus: threshold = 15
    (**) Stylus: max x set to 24576 by xorg.conf
    (**) Stylus: max y set to 18432 by xorg.conf
    (**) Stylus: max z = 255
    (**) Option "TPCButton" "off"
    (**) Option "BaudRate" "9600"
    (**) Stylus: serial speed 9600
    (II) XINPUT: Adding extended input device "Stylus" (type: Wacom Stylus)
    (==) Wacom device "Stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (**) Option "SendCoreEvents"
    (**) Eraser: always reports core events
    (**) Eraser device is /dev/ttyS0
    (**) Eraser is in absolute mode
    (**) Eraser: forcing TabletPC ISD V4 protocol
    (**) WACOM: suppress value is 2
    (**) Option "KeepShape" "on"
    (**) Eraser: keeps shape
    (**) Option "BottomX" "24576"
    (**) Eraser: bottom x = 24576
    (**) Option "BottomY" "18432"
    (**) Eraser: bottom y = 18432
    (**) Eraser: threshold = 15
    (**) Eraser: max x set to 24576 by xorg.conf
    (**) Eraser: max y set to 18432 by xorg.conf
    (**) Eraser: max z = 255
    (**) Option "BaudRate" "9600"
    (**) Eraser: serial speed 9600
    (II) XINPUT: Adding extended input device "Eraser" (type: Wacom Eraser)
    (==) Wacom device "Eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
    (II) UnloadModule: "mouse"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) UnloadModule: "wacom"
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) intel(0): [drm] removed 1 reserved context for kernel
    (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8079000 at 0xb78f7000
    (II) intel(0): [drm] Closed DRM master.
    anyone clue?
    Last edited by lynucs (2009-05-09 18:38:01)

    took a look into everything.log.
    that line looks pretty suspicious:
    kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    it occures around the time i did the last resume.
    here is a relevant snippet from everything.log:
    Apr 14 18:35:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:35:58 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:36:00 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:36:00 thinky acpid: 1 client rule loaded
    Apr 14 18:38:04 thinky ntpd[6265]: adjusting local clock by -87.862975s
    Apr 14 18:42:04 thinky ntpd[6265]: adjusting local clock by -87.769493s
    Apr 14 18:42:55 thinky acpid: client 6223[0:0] has disconnected
    Apr 14 18:42:55 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:42:57 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 18:43:07 thinky kernel: PM: Syncing filesystems ... done.
    Apr 14 18:43:07 thinky kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Apr 14 18:43:07 thinky kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Apr 14 18:43:07 thinky kernel: Suspending console(s) (use no_console_suspend to debug)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Stopping disk
    Apr 14 18:43:07 thinky kernel: serial 00:09: disabled
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: ACPI handle has no context!
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# enabled
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Apr 14 18:43:07 thinky kernel: ACPI: Preparing to enter system sleep state S3
    Apr 14 18:43:07 thinky kernel: Disabling non-boot CPUs ...
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Intel machine check architecture supported.
    Apr 14 18:43:07 thinky kernel: Intel machine check reporting enabled on CPU#0.
    Apr 14 18:43:07 thinky kernel: Back to C!
    Apr 14 18:43:07 thinky kernel: Extended CMOS year: 2000
    Apr 14 18:43:07 thinky kernel: Force enabled HPET at resume
    Apr 14 18:43:07 thinky kernel: ------------[ cut here ]------------
    Apr 14 18:43:07 thinky kernel: WARNING: at kernel/hrtimer.c:625 hres_timers_resume+0x41/0x50()
    Apr 14 18:43:07 thinky kernel: Hardware name: 1866WBA
    Apr 14 18:43:07 thinky kernel: hres_timers_resume() called with IRQs enabled!Modules linked in: ipv6 aes_i586 aes_generic i915 drm i2c_algo_bit ext2 pcmcia psmouse thinkpad_acpi rfkill nvram i2c_i801 serio_raw iTCO_wdt iTCO_vendor_support i2c_core sg yenta_socket rsrc_nonstatic sdhci_pci sdhci pcmcia_core mmc_core video output uhci_hcd ehci_hcd usbcore intel_agp agpgart evdev thermal fan button battery ac fuse snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ath_pci wlan ath_hal(P) arc4 ecb ath5k mac80211 led_class cfg80211 tg3 libphy cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table processor rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod ata_piix ahci ata_generic pata_acpi libata scsi_mod
    Apr 14 18:43:07 thinky kernel: Pid: 9512, comm: s2ram Tainted: P 2.6.29-ARCH #1
    Apr 14 18:43:07 thinky kernel: Call Trace:
    Apr 14 18:43:07 thinky kernel: [<c012f9d7>] warn_slowpath+0x87/0xe0
    Apr 14 18:43:07 thinky kernel: [<c011ec25>] default_spin_lock_flags+0x5/0x10
    Apr 14 18:43:07 thinky kernel: [<c01164d0>] lapic_next_event+0x10/0x20
    Apr 14 18:43:07 thinky kernel: [<c01500e3>] clockevents_program_event+0xa3/0x170
    Apr 14 18:43:07 thinky kernel: [<c0151312>] tick_dev_program_event+0x32/0xb0
    Apr 14 18:43:07 thinky kernel: [<c0150447>] tick_notify+0x97/0x3c0
    Apr 14 18:43:07 thinky kernel: [<c01491a6>] notifier_call_chain+0x36/0x70
    Apr 14 18:43:07 thinky kernel: [<c0147ea1>] hres_timers_resume+0x41/0x50
    Apr 14 18:43:07 thinky kernel: [<c014cc3a>] timekeeping_resume+0x11a/0x140
    Apr 14 18:43:07 thinky kernel: [<c0299d91>] __sysdev_resume+0x11/0x50
    Apr 14 18:43:07 thinky kernel: [<c0299e0f>] sysdev_resume+0x3f/0x70
    Apr 14 18:43:07 thinky kernel: [<c015b410>] suspend_devices_and_enter+0x160/0x190
    Apr 14 18:43:07 thinky kernel: [<c015bb7f>] freeze_processes+0x4f/0xa0
    Apr 14 18:43:07 thinky kernel: [<c015b58a>] enter_state+0xfa/0x150
    Apr 14 18:43:07 thinky kernel: [<c015b674>] state_store+0x94/0xd0
    Apr 14 18:43:07 thinky kernel: [<c015b5e0>] state_store+0x0/0xd0
    Apr 14 18:43:07 thinky kernel: [<c0224a74>] kobj_attr_store+0x24/0x30
    Apr 14 18:43:07 thinky kernel: [<c01f3351>] sysfs_write_file+0xa1/0x100
    Apr 14 18:43:07 thinky kernel: [<c01f32b0>] sysfs_write_file+0x0/0x100
    Apr 14 18:43:07 thinky kernel: [<c01a8df0>] vfs_write+0xa0/0x160
    Apr 14 18:43:07 thinky kernel: [<c01a8f81>] sys_write+0x41/0x80
    Apr 14 18:43:07 thinky kernel: [<c0103ea3>] sysenter_do_call+0x12/0x2f
    Apr 14 18:43:07 thinky kernel: ---[ end trace 2b9e3dc85bad025f ]---
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x68000000)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1821)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0x1881)
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xa0040000)
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xa0211000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: restoring config space at offset 0x3 (was 0x5008, writing 0xa808)
    Apr 14 18:43:07 thinky kernel: ACPI: Waking up from system sleep state S3
    Apr 14 18:43:07 thinky kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
    Apr 14 18:43:07 thinky kernel: agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.1: PME# disabled
    Apr 14 18:43:07 thinky kernel: pcieport-driver 0000:00:1c.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb2: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb3: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb4: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: usb usb5: root hub lost power or was reset
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Apr 14 18:43:07 thinky kernel: pci 0000:00:1e.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Apr 14 18:43:07 thinky kernel: Intel ICH 0000:00:1e.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac820000)
    Apr 14 18:43:07 thinky kernel: tg3 0000:02:00.0: PME# disabled
    Apr 14 18:43:07 thinky kernel: sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Apr 14 18:43:07 thinky kernel: ath5k 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    Apr 14 18:43:07 thinky kernel: serial 00:09: activated
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Starting disk
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
    Apr 14 18:43:07 thinky kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1.00: configured for UDMA/100
    Apr 14 18:43:07 thinky kernel: ata1: EH complete
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write Protect is off
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 14 18:43:07 thinky kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 14 18:43:07 thinky kernel: usb 4-2: reset full speed USB device using uhci_hcd and address 2
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: power state changed by ACPI to D0
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 14 18:43:07 thinky kernel: pci 0000:00:02.0: setting latency timer to 64
    Apr 14 18:43:07 thinky kernel: Restarting tasks ... done.
    Apr 14 18:43:07 thinky acpid: client 9040[0:0] has disconnected
    Apr 14 18:43:07 thinky logger: ACPI group/action undefined: processor / CPU
    Apr 14 18:43:07 thinky acpid: client connected from 9040[0:0]
    Apr 14 18:43:07 thinky acpid: 1 client rule loaded
    Apr 14 18:43:08 thinky dhcpcd[7651]: wlan0: carrier lost
    Apr 14 18:43:08 thinky kernel: wlan0: deauthenticating by local choice (reason=14)
    Apr 14 18:43:08 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:09 thinky kernel: ath5k phy0: noise floor calibration timeout (2452MHz)
    Apr 14 18:43:13 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 1
    Apr 14 18:43:13 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:13 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: authenticated
    Apr 14 18:43:13 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:13 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:14 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 2
    Apr 14 18:43:14 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:14 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: authenticated
    Apr 14 18:43:14 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:14 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:15 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b try 3
    Apr 14 18:43:15 thinky kernel: wlan0 direct probe responded
    Apr 14 18:43:15 thinky kernel: wlan0: authenticate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: authenticated
    Apr 14 18:43:15 thinky kernel: wlan0: associate with AP 00:12:bf:a2:a5:5b
    Apr 14 18:43:15 thinky kernel: wlan0: deauthenticated (Reason: 1)
    Apr 14 18:43:16 thinky kernel: wlan0: direct probe to AP 00:12:bf:a2:a5:5b timed out
    Apr 14 18:43:19 thinky logger: ACPI group/action undefined: ibm/hotkey / HKEY
    Apr 14 18:43:19 thinky kernel: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Apr 14 19:27:27 thinky syslog-ng[5106]: syslog-ng starting up; version='3.0.1'
    Apr 14 19:27:27 thinky kernel: Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
    Apr 14 19:27:27 thinky kernel: KERNEL supported cpus:
    Apr 14 19:27:27 thinky kernel: Intel GenuineIntel

  • [Solved]Black screen after "waiting for udev uevents to be processed"

    Hello friends,
    Starting from late Dec., my laptop goes black screen after "waiting for udev uevents to be processed", after updating kernel to 2.26.32.*.  The strange thing is that even the screen is black, the keyboard is working. For example, I can turn on/off the status lights of capslock and others. I guess something might be wrong with udev uevents configuration with regard to the latest kernel. I've noticed that in the new kernel, there are two drivers for intel integrated graphics. My laptop has a 855G, which is supposed to be functional by both drivers, at least according to the kernel description. Maybe because the udev is configured to use the second driver (for newer graphic chips), rather than the first driver, which caused the problem?
    Regards,
    Wen
    Last edited by Wen (2010-01-28 13:14:28)

    Have a look here: http://bbs.archlinux.org/viewtopic.php? … 70#p695670

  • [Solved] Black Screen after Xorg configure.

    Hello all Archlinux users;)
    Yesterday i reinstall my system (Archlinux x86_64).
    Install was succesful (it's always succesful).
    Problems started after install ,I istalled Xorg a Nvidia Drivers (GF 8600GT).
    I got conflicts nvidia-utils with xorg.utils 7-4-1 and it's remowe something gl libary.
    And ,i like always install hwd.
    I configure xorg with hwd -xa.
    I start X with (X -config /etc/X11/xorg.conf)
    And after that i started that i got black screen (Monitor have signal).
    I try nvidia drivers too ,but it's like with the Vesa (Black Screen).
    And my questions is:
    What Should i do to run Xorg?
    I run before Arch with similiar config and it's works.
    I can't get here X.org log or xorg.conf but they don't have any erorrs (in log i have something about hal and dievice , but on wiki i read that xorg 1.6 blocked hotplug dievices).
    Sorry for my English:|
    Thanks for help.
    I found similiar problem in this topic:
    http://bbs.archlinux.org/viewtopic.php?id=71158 .
    Last edited by SpeedVin (2009-05-01 06:11:36)

    Hello Again
    I started X.
    And my tip for all Arch user is to install only xorg not xserver-xorg xorg-utils just xorg to have .xinit/startx script.
    But it's not over I started X but the mause and keyboard are not responding (they are dead).
    Before when i got this I just try hwd -xa and this solved my problem.
    Now i use xorg.conf generated by hwd -xa and it's happening (mouse and keyboard are not responding).
    I got "AllowMouseOpenFail" "true"
    "AutoAddDivices" "False"
    In Server Flags but this doesn't solved my problem.
    Please help

  • Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP

    Hey all.
    So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
    After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
    However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
    After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
    Thanks!

    Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
    The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all.

  • [Solved] Black Screen after KDM - plasma-desktop error with libpng

    Hey,
    i just wanted to log in to my arch session, but after KDM theres just a black screen.
    I found out, that all programs startet via krunner are working.
    So it's just plasma-desktop, what makes the problems
    plasme-desktop
    LONG OUTPUT AND IN THE END
    libpng warning: IDAT CRC error
    lippng error: PNG unsigned integer out of range
    thats it... plasma-netbook works without any problems... also window effects are working
    Dont know wheter its any help, but i dualboot with macOS and share the desktop, where 2 .jpgs are stored, dont know wether this is important...
    Edit:
    I've tried to delet the jpgs in the desktop folder and uninstalled kde-wallpapers. Still no luck
    I've also tried to downgrade libpng to 1.5.14, but when i reboot, kdm wont start.... maybe there's something i haven't thought through....
    However the Output changed a bit, heres the full output:
    [markus@MacBook ~]$ plasma-desktop
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 14: reading configurations from ~/.fonts.conf is deprecated.
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    QGraphicsLinearLayout::insertItem: cannot insert null item
    QGraphicsLinearLayout::insertItem: cannot insert null item
    plasma-desktop(1757)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    13:11:22.331 Info [Appl. Thread] YaWP::YaWP (Line 95):
    13:11:22.331 Info [Appl. Thread] YaWP::YaWP (Line 96): yaWP 0.4.2 compiled at Mar 30 2012 22:19:57 for KDE 4.8.1 (4.8.1)
    13:11:22.332 Info [Appl. Thread] YaWP::YaWP (Line 97): yaWP 0.4.2 is running on KDE 4.10.4
    13:11:22.332 Info [Appl. Thread] YaWP::YaWP (Line 98):
    plasma-desktop(1757)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1757)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1757)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    plasma-desktop(1757)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
    13:11:22.735 Debug [Appl. Thread] YaWP::loadConfig (Line 529): "wunderground" "Nuernberg, Germany" "Germany" "de" "airport:EDDN" "Europe/Berlin" "DE"
    13:11:22.746 Info [Appl. Thread] WundergroundIon::WundergroundIon (Line 203): WundergroundIon 0.4.2 compiled at Mar 30 2012 22:20:16 for KDE 4.8.1 (4.8.1)
    13:11:22.746 Debug [Appl. Thread] WundergroundIon::getWeatherData (Line 758): QUrl("http://api.wunderground.com/auto/wui/geo/WXCurrentObXML/index.xml?query=EDDN")
    13:11:22.747 Debug [Appl. Thread] WundergroundIon::getWeatherData (Line 819): Added XmlWeatherData for "airport:EDDN"
    libpng error: bad adaptive filter value
    Thanks for any help!
    Last edited by markus2107 (2013-06-17 14:52:06)

    Should have done that earlier... renaming .kde4
    Now it workes... and after uninstalling yawp-plasmoid i renamed .kde4... everything's fine now!
    So if anybody else runs in this problem too, my advice: check your aur-plasmoids!

Maybe you are looking for

  • Adobe Bridge CS6 Mac cannot be launched

    Dear Adobe community! I just installed my brand new CS6 Design & Web Premium Suite on my MacBook Pro running OS X 10.8.3 and installed all of the available CS6 updates. Unfortunately I cannot launch Bridge  (version 5.0.2.4) from my account (admin pr

  • Adobe Reader 9.4.2 for Solaris

    Adobe has recently released Adobe Reader 9.4.2 that contains a huge number of bug fixes.  But, surprisingly there's no Solaris specific binaries are available at ftp://ftp.adobe.com/pub/adobe/reader/unix/9.x/9.4.2/   unlike older releases (e.g 9.4.1)

  • GOS / TOA01 & ArchiveLink

    Hi, I would like to add my own entries in the GOS, save the file saved with this link in a specific place using the TOA01 table. so... what I have done -> Trans. SWO1 create my own entries -> Trans. OAC2 : create my doc type : ZBA_CC link to PDF file

  • Animation (Fly-In) Menu to trigger Visibility of Sub-Menu

    Hi, I am trying to create content menu which is triggered by self roll over state.  The content menu flies in from the left on self roll over and will fly out again on reverse roll over.   The content menu has 5 buttons, the first 4 buttons take you

  • Valuation class for imports and domestic material

    Hi, We wanted to hit different GLs for domestic and Imported materials inventory and therefore we have defined two valuation classes for Domestic and Imported material and these  valuation classes are attached to respective materials in account view